This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.
Learn how to take blood ... train as a Phlebotomist Nationally Recognised Qualification No previous experience or qualifications needed OCN Accredited - Level 3 (advanced) CPD Accredited (The CPD Certification Service) Covers all steps up to live blood draw Practise on artificial arm and fake blood! Basic understanding of English language required OPEN TO ALL APPLICANTS
Phoenix Pottery and Art Studio offer a Membership programme for experienced potters, with full use of the pottery studio. Alongside their regular pottery classes and courses. Situated in Golborne, near Warrington, St Helens, Wigan and with easy motorway access for the Northwest UK. Approx 20 miles from Manchester and Liverpool.
THIS COURSE PACKAGE INCLUDES: 1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5) 2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6) 3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom) Learn how to take blood ... train as a Phlebotomist FAST-TRACK YOUR PHLEBOTOMY TRAINING WITH OUR COMPLETE TRAINING PACKAGE 20% off - Multi-Course Discount Cover all stages from beginner through to Level 4 Available as Classroom or Virtual Classroom Complete your beginner to advanced training in 2 days Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications Both courses are dually accredited (OCN & CPD) Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom Covers all steps up to live blood draw Learn advanced skills and techniques Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep) Basic understanding of English language required OPEN TO ALL APPLICANTS
Learn how to cannulate ... Nationally Recognised Qualification OCN Accredited - Level 3 (advanced) - Ireland Level 5 CPD Accredited - The CPD Certification Service Classroom or Virtual Classroom options Covers all steps for cannulating in arm or hand Practise on artificial arms and fake blood! Essential qualification for all IV therapies Phlebotomy training desirable but not essential Basic understanding of English language required OPEN TO ALL APPLICANTS
Struggling to perfect your latte art? Our comprehensive 3-hour masterclass will teach you all about texturing milk, pouring patterns and achieving beautiful latte art. The course is a hands-on, practical experience where you will work alongside Benny, an experienced speciality coffee barista, to learn all about latte art and up your game. You'll learn the theory and tips behind getting perfectly-textured milk, watch demonstrations and then use our top-quality equipment to have plenty of goes yourself at pouring patterns, with constant feedback and guidance. We also specifically cater towards non-dairy milk drinkers too, so please let us know in advance whether you would like to learn with oat milk or dairy by entering it in your booking notes. Two hour short course If you already have some experience and are looking for a shorter, two-hour course then see the other options on our website. Free coffee Included with your booking are two x 230gr bags of our speciality coffee for you to take home to enjoy and practice with! Request a date We usually run this workshop on a Thursday, Friday or Saturday at 5pm. We are regularly adding new dates but if you have a specific day you'd like to do the course then please use the request a date feature or contact us and we'll check our availability. Thank you.
Event Planning 1 Day Training in Bristol
Learn how to test portable electrical appliances with a qualification in Electrical Equipment Maintenance and Testing aimed at new starters to the testing of portable electrical equipment with minimal electrical knowledge. This qualification is aimed at those with responsibilities for the maintenance of electrical equipment and for those undertaking practical inspection and testing of electrical equipment. It allows those with the responsibility for the testing and inspection of electrical equipment to gain a qualification suitable to their job role. The qualification allows candidates to learn, develop and practise the skills required to inspect and test items of electrical equipment in line with the latest edition of the Code of Practice for In-Service Inspection and Testing of Electrical Equipment. Learners completing the qualification will have the ability to carry out mandatory responsibilities within the workplace depending on their prior electrical knowledge This level will suit you if you are looking to become involved in, the inspection and testing of electrical equipment. To successfully complete the qualification learners will have to sit an Evolve on-line test comprising of a 50 MCQ and a practical assignment. The practical consists of 3 tasks which are: Task 1 is inspect and test Class I equipment, Task 2 is inspect and test Class II equipment (this will be either unearthed metal or without unearthed metal or Class II FE – Learners will not need to do all 3 of these, they only need to do one type), Task 3 is completing the record forms
Learn how to test portable electrical appliances with a qualification in Electrical Equipment Maintenance and Testing. Aimed at practicing electricians this qualification will help and progress individuals within the Electrotechnical industry. This qualification is aimed at those with responsibilities for the maintenance of electrical equipment and for those undertaking practical inspection and testing of electrical equipment. It allows those with the responsibility for the testing and inspection of electrical equipment to gain a qualification suitable to their job role. The qualification allows candidates to learn, develop and practise the skills required to inspect and test items of electrical equipment in line with the latest edition of the Code of Practice for In-Service Inspection and Testing of Electrical Equipment. If you already work as an electrician it will add another string to your bow and can help you move up in the industry. Learners completing the qualification will have the ability to carry out mandatory responsibilities within the workplace depending on their prior electrical knowledge This level will suit you if you are a practising electrician either involved in, or looking to become involved in, the inspection and testing of electrical equipment. To successfully complete the qualification learners will have to sit an Evolve on-line test comprising of a 50 MCQ and a practical assignment. The practical consists of 3 tasks which are: Task 1 is inspect and test Class I equipment, Task 2 is inspect and test Class II equipment (this will be either unearthed metal or without unearthed metal or Class II FE – Learners will not need to do all 3 of these, they only need to do one type), Task 3 is completing the record forms
For those with some experience in latte art or needing a refresher, our Latte Art Improvers Workshop is a two-hour session where you'll brush up on your skills. We'll cover finer points of latte art for baristas or coffee enthusiasts who feel confident about pouring a heart and are ready to try some more intermediate patterns such as tulips and rosettas. The course is a hands-on, practical experience where you will work alongside Benny, an experienced speciality coffee barista, to learn all about latte art and up your game. You'll learn tips behind getting perfectly-textured milk, watch demonstrations and then use our top-quality equipment to have plenty of goes yourself at pouring patterns, with constant feedback and guidance. We also specifically cater towards non-dairy milk drinkers too, so please let us know in advance whether you would like to learn with oat milk or dairy by entering it in your booking notes. Three hour masterclass If you don't have any experience in latte art and want to start from scratch, we also run a 3-hour 'masterclass' which is perfect if you want a more comprehensive session. Please find more details on our website. Free coffee Included with your booking are two x 230gr bags of our speciality coffee for you to take home to enjoy and practice with! Request a date We usually run this workshop on a Thursday, Friday or Saturday at 5pm. We are regularly adding new dates but if you have a specific day you'd like to do the course then please use the request a date feature or contact us and we'll check our availability. Thank you.