357 Working At Heights courses

Course Objectives The delegates are able to demonstrate: knowledge of hazards and risks associated with working at heights, specific to WTG (Wind Turbine Generator). understanding of current national legislation regarding working at heights. correct identification of PPE, including identification of European/Global standard markings e.g. harness, hard hat, lanyards, etc. knowledge and skills to correctly inspect, service, store and don the relevant PPE, e.g. harness, lanyards, fall arresters and work positioning equipment. correct use of the relevant PPE, e.g.harness lanyards, fall arresters and work positioning equipment. This includes correct identification of anchor points and correct ladder conduct. correct use of evacuation devices. how to approach rescue situations in WTGs and use rescue equipment efficiently.

Elevate your knowledge and skills in working at heights safely. Comply with regulations, implement risk assessments, and master the use of specialized equipment for fall protection. This course makes you adept at ensuring workplace safety in elevated environments.

WORKING AT HEIGHTS TRAINING - ONLINE COURSE This online Working at Heights course provides learners with an understanding of the risks of working at height so that they are able to minimise the risk of falls and injury by adopting control measures and safe work practices. The law requires employers to take reasonable steps to safeguard the health and safety of all employees. This includes raising awareness about the risks related to working at height. This Working at Heights online training only provides awareness education and does not qualify someone to use access equipment or safety equipment. Additional practical training will be required before a person is competent to work at height. THE IMPORTANCE OF WORKING AT HEIGHT AWARENESS TRAINING Working at Height Awareness training is very important because falls from height are the highest cause of workplace fatalities in the UK. All companies want to reduce the chance of accidents, injury and death. Working at Heights training reduces the risk of falls. Employees who understand the risks of working at height can minimise the risk of falls and injury by adopting control measures and safe work practices. Your business will benefit from a well-trained workforce. Staff will appreciate your investment in their health and education. Fewer injuries, and therefore fewer sick days, means higher productivity. WHAT ARE THE LEARNING OUTCOMES FOR THIS WORKING AT HEIGHTS ONLINE COURSE? At the end of the course you will be able to describe: * The term 'working at height' and some common examples. * The number of reported injuries and fatalities involving work at height. * How to assess the risks using a hierarchy of controls. * Key laws that aim to keep people safe when working at height. * The duties and responsibilities of employers and those in control of work. * When you need an emergency rescue plan and what this plan is for. * The hazards posed by falling objects. * Measures you can take to minimise the risk of falling objects. * What a 'drops calculator' is and how to use it. * The need to select and check the correct ladder for the job. * The things to consider when you plan to work at height. WHAT IS WORKING AT HEIGHT? The first topic defines the term 'working at height' and gives everyday examples of work at height. You will learn about how many serious injuries and fatalities involve falls from height. The topic also covers other risks and hazards to consider when you work at height. DUTIES AND RESPONSIBILITIES The second topic is about the laws that aim to keep people safe when they work at height. It covers the duties the law places on employers, people in control of work and employees. You will learn about the requirement for emergency procedures. The topic also covers other laws that relate to working at height. ASSESSING AND CONTROLLING THE RISKS The third topic identifies why organisations need to do a risk assessment and the factors to consider in the assessment. The topic describes the hierarchy of control specified in the regulations. You will learn about both collective and personal protection. The topic explains how to reduce risks and the importance of three-point holds. FALLING OBJECTS Topic 4 outlines measures you can take to reduce the risk from falling objects. You will learn about the importance of drop zones and the drops calculator. The topic explains how to estimate the probable severity of injuries. LADDER PRE-USE CHECKS Topic 5 is about ladder pre-use checks. You will learn about ladder materials and their advantages and disadvantages. You will also learn about ladder standards and labelling and some important things to consider before you use a ladder. The topic covers when you should check a ladder and pre-checks for both leaning ladders and step ladders. The topic also outlines HSE guidance on ladder use. PLANNING YOUR WORK The final topic outlines the checks to make before you start any work at height. You will learn about the importance of how tools and materials are moved to and from the work area. The topic identifies precautions to take when you work at height and other hazards associated with working at height.

This driver CPC course Vehicle Roadworthiness & Load Safety is suitable for LGV drivers only and will cover: Requirements, Walk Around Checks, Legal Requirements, Additional Checks, Safety Equipment, Defect Reporting, Maintenance, Prohibitions, Considerations Before Loading, Overloading, Load Distribution, Load Security, Vehicle Dimensions, Loading Equipment.

Elevate your knowledge and skills in working at heights safely. Comply with regulations, implement risk assessments, and master the use of specialized equipment for fall protection. This course makes you adept at ensuring workplace safety in elevated environments.

The delegates are able to demonstrate: The participants are able to demonstrate knowledge of hazards and risks associated with working at height specific to a wind turbine generator (WTG) (L2 – Knowledge) The participants are able to demonstrate understanding of current national and regional legislation regarding working at height (L2 – Knowledge) The participants are able to demonstrate correct identification of PPE, including identification of Global and regional standard markings e.g. harness, hard hat, lanyards, etc. (L3 – Skills) The participants are able to demonstrate the knowledge and skills to correctly perform pre-use inspection, service, store and correctly fit relevant PPE, e.g. harness, fall arrest lanyards, guided type fall arrest lanyards and work positioning lanyards (L2 – Knowledge & L3 – Skills) The participants are able to demonstrate correct use of the relevant PPE, e.g. harnesses fall arrest lanyards, guided type fall arresters and work positioning lanyards. This includes correct identification of anchor points and correct conduct on ladder (L3 – Skills) The participants are able to demonstrate correct use of evacuation devices (L3 – Skills) The participants are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently (L3 – Skills & Ability)

QA LEVEL 2 AWARD IN WORKING AT HEIGHT (RQF) * Face to Face: Half-day course * Virtual Classroom: Spread over 2 sessions of 2½ hr duration * Raises awareness of safety considerations whilst working at height * Teaches how to ensure a safe working environment -------------------------------------------------------------------------------- Course Contents: * Legislation, regulations, roles and responsibilities when working at height * The consequences of non-compliance * Safe working practices when working at height * How to reduce the risks from: * Weather conditions * Working environments * Others working at height * Falling objects * Fragile surfaces * Importance of risk assessments * Rescue plan requirements * Selecting appropriate equipment * Identifying safety precautions when using equipment * Importance of Personal hygiene * Reporting procedures when equipment is faulty BENEFITS OF THIS COURSE: * 35 People died in 2017/18 due to falls from height * There were also 43,000 non-fatal accidents due to falls from height * These resulted in 80 major injuries * And 230 over-3-day absences, costing employees and employers money * Even just a height of less than 2 meters can result in serious, or even fatal, injuries * The Work at Height Regulations 2005 require employers, and those in charge of any type of work at height activity to ensure that the work is properly planned, well supervised and carried out by competent people * Employees who do this course will learn to have a greater awareness of the risks involved in working at height, and on how to best manage those risks, ensuring the safety of all concerned -------------------------------------------------------------------------------- ACCREDITED, OFQUAL REGULATED QUALIFICATION: This Health and Safety Training Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards [https://qualsafeawards.org/]. This means that you can be rest assured that your Health and Safety Certificate fulfils the legal requirements and is an excellent way to make sure you and your employees are trained in Health and Safety. The Ofqual Register number for this course is 603/2687/6 --------------------------------------------------------------------------------

The aim of this module is to enable delegates to perform entry-type injured person rescue operations, in a Wind Turbine Generator, using industry standard rescue equipment, rescue methods and techniques, exceeding those of GWO Working at Heights. Valid GWO BST Module Working at Heights, GWO First aid and GWO Manual Handling certificates are prerequisites for participation.

Trainer to Candidate Ratio: Working at Height Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Frist Aid Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Manual Handling Theory: 12 Students to 1 instructor; Practical: 12 Students to 1 instructor Fire Awareness: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Sea Survival: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Enhanced First Aid: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Advanced Rescue Training: Theory: 12 Students to 1 instructor; Practical: 4 Students to 1 instructor