• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

68 Wiring Regulations courses

City & Guilds 18th Edition Course

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

City & Guilds 18th Edition Course
Delivered Online & In-Person + more
£264

AM2/AM2E/AM2S Assessment

By Technique Learning Solutions

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

AM2/AM2E/AM2S Assessment
Delivered in Clay Cross or Online + more
£500

Sparky Facts 18th edition course

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

Sparky Facts 18th edition course
Delivered Online & In-Person + more
£264

18th Edition Course London

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

18th Edition Course London
Delivered Online & In-Person + more
£264

18th Edition Course Guildford

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

18th Edition Course Guildford
Delivered Online & In-Person in Guildford + more
£264

18th Edition Courses Southampton

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

18th Edition Courses Southampton
Delivered Online & In-Person in Southampton + more
£264

18th Edition Wiring Regulations City and Guilds 2382-22

By Technique Learning Solutions

Course Description: The 18th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. It is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC based examination with instant results. The course cost includes examination entry fees. Focus: You will study the latest standard of the IET wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

18th Edition Wiring Regulations City and Guilds 2382-22
Delivered in Scotland + 1 more or Online + more
£500

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations

By Technique Learning Solutions

City & Guilds 2391-52 Combined Course: Course Description The new Testing and Inspection City & Guilds 2391-52 Combined Course qualification replaces and is improved on the former 2394/2395 that was previously available to electricians but has since been withdrawn. City & Guilds 2391-52 course runs over five consecutive days, the first three days covering fundamental theory. The fourth day covering Initial Verification practical and revision. The fifth day of the City & Guilds 2391-52 course covering Periodic Inspection practical and revision with an open book 2 hours Multiple choice exam. A 5 day City & Guilds 2391-52 course for a student possessing knowledge of the wiring regulations and with minimal knowledge of inspection and testing, We strongly recommend City and Guilds 2382 is achieved prior to sitting this course, though this is NOT an entry requirement. In order to claim the full City & Guilds 2391-52 qualification, students must successfully complete the following: Completed during the course each student will sit a 2 hours online Multiple choice exam (open book) Then will have to reattend and complete a Practical Assessment which is 4hrs. Assessment – 2391-52 Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs and 30mins Task C – Short Answer Questions – 1hr and 20mins To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City & Guilds 2391-52 course costs include examination entry fees. The Tutors: Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment. On-site Available Group Rate: (up to 8 people): £895.00 + VAT Per Day* plus £50.00 + VAT Exam Entry Fee per Student *(over 8 people, please call on 0800 112 3310 to discuss Group Rate) This course replaces City & Guilds 2394/2395 combined – Level 3. Essential Book supplied *throughout* course!First exam fee included!

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

BS7671 Wiring Regulations 18th Edition

5.0(39)

By City Training Group

Personnel involved in the electrotechnical sector such as electricians, designers and inspectors who wish to update their knowledge to the IET Wiring Regulations Eighteenth Edition. Learners who wish to gain an understanding of BS 7671.

BS7671 Wiring Regulations 18th Edition
Delivered In-PersonFlexible Dates
£449

18th edition course Bromley

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

18th edition course Bromley
Delivered Online & In-Person in Bromley + more
£264
123...7

Educators matching "Wiring Regulations"

Show all 24
Peta Training & Consultancy

peta training & consultancy

4.7(30)

Portsmouth

PETA was founded in 1970 by Alex Zemenides who, at the time, was Managing Director of component manufacturing company Sealectro. At the time, Zemenides felt there was a lack of training and development opportunities for his staff in the local area. Training that could be tailored to his staff and business, that met industry and commercial standards and that didn’t have to work around a rigid syllabus or programme. Together with five other local businesses, he created the Portsmouth Engineering Training Association – PETA – that was based in Southsea, Portsmouth. The combined vision of this group was to establish an organisation, controlled by local business, that would be free from external influences to concentrate on the training and development of people employed, or about to be employed, in industry and commerce. As such, PETA was set up to be (and still is) a registered charity, directed by an executive council of leaders elected from our member base. There are no shareholders at PETA, only stakeholders. We operate on a self-financing basis and are non-profit making, which means all our funds are reinvested into the services and training we deliver. Whilst our heritage is in engineering, today, PETA offers over 200 courses and apprenticeship programmes in the most sought after professional, digital and technical skillsets – from management training to health and safety qualifications, IT skills and engineering. Today, PETA is one of the largest and most respected training providers on the south coast and we will continue to build on this reputation, transforming careers and building the next generation of business leaders and technical experts.

Training 365 Limited

training 365 limited

5.0(1)

Burnley

The company founders, Ian Loftus and John Ainscow, formed Training 365 with a combined 30 years’ experience in the training and education industry. Their vision; to become a leading training provider across the North West of England and beyond. We established Training 365 after many years of working in the training industry. This experience allowed us to build a training company that delivers what customers want, when they want it. At Training 365 we offer a fresh new approach to training within Health & Safety, First Aid, FLT, Leadership and Management, IT, Electrical, Engineering and Hospitality. We listen and respond to our customer’s needs, tailor training to suit those needs and deal with business’s ranging from SME’s to blue chip companies – building relationships is really is important to us. We believe in minimising red tape and delivering a fresh approach to training. This includes training 24 hours a day, 7 days a week. Our industry-expert trainers help us to take the customer experience to the next level. Our 5 Core Company Values: 1. No Compromise on Quality – Quality is at the heart of everything we do at Training 365, from handling enquiries, designing bespoke training packages to delivery, we guarantee quality at every stage. 2. Professional Delivery by Industry Specialists – All our trainers and consultants are industry experts within their own rights which means they bring a wealth of experience to all training courses delivered resulting in attendee’s receiving an enhanced customer experience 3. Flexible Delivery – We appreciate that companies will always have their own specific requirements in terms of where and when training takes place, that’s why Training 365 lives up to its name by meeting customers’ expectations with courses delivered “any time, any place” 4. Exceptional Customer Care – Training 365 takes great pride in offering customer care to the highest standard in all aspects of training from planning, delivery and post course service 5. Fully Managed Service – Arranging training can sometimes be a task that people are asked to do on top of their normal duties which is why Training 365 offer a managed service to ensure you and your business are fully compliant with regulations. All our training can be delivered on your premises or at our dedicated training centre here in Burnley and we would be delighted to visit you to inform you of the vast array of courses we offer and discuss any future training requirements.