20 Vehicle Inspection courses

The IMI Light Vehicle Inspection Technician Accreditation is for experienced mechanics who would like to gain recognition for their skills and knowledge. It is also accepted by the Driver and Vehicle Standards Agency (DVSA) as the stage 1 entry qualification for mechanics and technicians who wish to train to become an MOT Tester for class 4 and 7 vehicles (cars and vans) It is normally valid for 3 years and successful candidates, as well as receiving a certifcate, photo card and pin badge, will also be entered on to the IMI Professional Register. This is a public-facing register to showcase individuals working in the motor industry, who have been recognised for their experience, professionalism and commitment to ethical working practices. However, there will be no requirement for you to re-accredit if you go on to complete your IMI Level 2 Award in MOT testing (classes 4 & 7) within the 3 year period. As an Inspection Technician you must be able to work unsupervised – ideally, you should be in full time employment with at least 3 years experience (4 years if you wish to become an MOT tester) to ensure you are familiar with the techniques for vehicle servicing, inspection and system(s) diagnosis. There are 5 practical assessments for this route and two online exams, one containing 30 questions and a second containing 10 questions. Please click on the links below to get an overview of the contents of each assessment. AOM – 071 – Emissions System – Inspection AOM – 072 – Electrical System – Inspection AOM – 073 – Braking Systems – Inspection AOM – 074 – Steering and Suspension Systems – Inspection AOM – 075 – Vehicle Structure – Inspection AOM – 076 – Vehicle Appraisal – Inspection   5 Day Training and Assessment. This training is aimed at experienced technicians who might need some training input prior to assessment. The assessments will take place over a 5 day period with the online assessment taking place mid week to allow for any re-sits that may be necessary. You will receive a copy of Tom Denton’s 4th edition Advanced Automotive Fault Diagnosis book which you can use in the intervening period to study and practice your knowledge and skills prior to attending the course. PLEASE NOTE THESE ASSESSMENTS ARE TO A LEVEL 3 STANDARD AND ARE DESIGNED TO BE TOUGH. THEY CONCENTRATE ON FAULT FINDING WITHIN A GIVEN TIMESCALE. SUCCESSFUL CANDIDATES WILL FIND ALL OF THE FAULTS WITHIN 1 HOUR. The next step If this accreditation is of interest to you, particularly if you wish to become an MOT tester, have a go at our initial assessment test. Our administrator will be in touch with you once we receive your result so that we can best advise you on the way forward.

The IMI Four Wheel Alignment course is 2 1/2 days in duration and is aimed at Technicians involved with carrying out light vehicle wheel alignment. It is advised that candidates should have a minimum of 3 months practical wheel alignment experience but courses of longer duration can be arranged for those people requiring it. Successful candidates will receive an IMI Quality Approved Award in Steering & Wheel alignment. As well as being recognised throughout the Motor Industry, this qualification will also count towards the NTDA tyre Technician Professional Development Scheme’s Licenced Retail Tyre Technician licence. PLEASE NOTE THIS COURSE FOCUSES ON THE FUNDAMENTALS OF WHEEL ALIGNMENT AND NOT ON ANY PARTICULAR TYPE OF WHEEL ALIGNMENT EQUIPMENT. Course Details: Classroom based theory session Workshop practice session Examination and assessment Course Fees £499.00 + VAT Per Candidate *Please contact us for group rates and onsite training Course Content Theoretical Health & Safety Components, functions & Layout of vehicle steering systems Steering angles and how they work together Common faults associated with steering systems 4 wheel alignment Practical Pre-alignment vehicle inspection. Carry out 4 wheel alignment. Carry ou a thrust angle alignment IMI assessment and test A multi-choice theory question paper Two practical assessments, observed by an IMI approved assessor.   What’s included Fully qualified and experienced trainer Course booklet Examinations Fees and Certification One year IMI membership To find out more, please use the live chat function, visit our contact page or call us on 024 76325880

This route is considered a progression for the tyre technician. To qualify for the LVST vehicle Technician course, you must already hold the LRTT and in addition be assessed as a competent practitioner with the relevant knowledge in the following covering car, light van and 4×4: Customer liaison Vehicle inspection and appraisal Battery and related components Exhaust systems Braking systems Computer-based testing equipment. We evaluate your current skills and certifications to create a training package perfectly suited to you. Each LVST course is unique as we provide additional training, where required, to complement your current certifications and knowledge. The light vehicle service technician license shows that you have all the know-how and skills required to proficiently and independently diagnose and repair light vehicles. On achieving this auto technician license, you will be able to practically and proficiently demonstrate the skills required for repairing light vehicles.  Offered by our fully licensed and experienced technicians, this license has been designed for mechanics/technicians that do not necessarily hold any formal qualifications. With decades of experience delivering high-quality automotive training courses, we are a small business that takes pride in the value and quality of service we provide. INTERESTED? PFTP is proud to have been awarded approval by the NTDA to offer this valuable licence to our customers. To find out more, please either telephone us on 024 76325880 or enquire below. We look forward to hearing from you!

Overview  Forklifts are one of the most used industrial equipment. Thus, it is important to learn forklift operating for the future and current professionals working in the relevant sectors. If you are one of them you can start developing your skills with our online Advanced Forklift Training. The course is divided into bite-sized modules. Each module will provide you with detailed lectures on how to use forklifts. First, you will learn about different types of forklifts. Then, the course will educate you on the strategies of operating forklifts safely. In addition, you will learn the skills for safely shifting heavy loads.  From this course, you will also get a clear understanding of the operational hazards and risks. It will ensure you are well aware of the safety regulations and measures for driving a forklift. So join now and enhance your skills! Course Preview Learning Outcomes Get introduced to different types of forklifts Learn the skills to operate forklifts safely Understand the strategies for moving and handling heavy loads Familiarise yourself with the operational hazards and risks Deepen your knowledge of the safety regulations and measures Why Take This Course From John Academy? Affordable, well-structured and high-quality e-learning study materials Meticulously crafted engaging and informative tutorial videos and materials Efficient exam systems for the assessment and instant result Earn UK & internationally recognised accredited qualification Easily access the course content on mobile, tablet, or desktop from anywhere, anytime Excellent career advancement opportunities Get 24/7 student support via email What Skills Will You Learn from This Course? Forklift maintenance Forklift controls and operation Vehicle inspection methods Health and safety protocols Who Should Take This Advanced Forklift Training? Whether you're an existing practitioner or an aspiring professional, this course is an ideal training opportunity. It will elevate your expertise and boost your CV with key skills and a recognised qualification attesting to your knowledge. Are There Any Entry Requirements? This Advanced Forklift Training is available to all learners of all academic backgrounds. But learners should be aged 16 or over to undertake the qualification. And a good understanding of the English language, numeracy, and ICT will be helpful. Advanced Forklift Training Certification After completing and passing the Advanced Forklift Training successfully, you will be able to obtain a Recognised Certificate of Achievement. Learners can obtain the certificate in hard copy at £14.99 or PDF format at £11.99. Career Path​ This exclusive Advanced Forklift Training will equip you with effective skills and abilities and help you explore career paths such as  Forklift Operator Construction Worker Industrial Worker Module 01: Introduction To Forklifts Introduction to Forklifts 00:18:00 Module 02: Types Of Forklifts Types of Forklifts 00:13:00 Module 03: Operating Forklifts Safely Operational Risks and Hazards 00:24:00 Module 04: Moving And Handling Loads Safely Moving and Handling Loads Safely 00:20:00 Module 05: Refuelling And Recharging Safely Refuelling and Recharging Safely 00:13:00 Module 06: Operational Risks And Hazards Operating Forklifts Safely 00:26:00 Module 07: Regulations And Safety Measures Regulations And Safety Measures 00:25:00 Assignment Assignment - Forklift Training - Online Course 00:00:00 Order Your Certificate and Transcript Order Your Certificates and Transcripts 00:00:00

Refresher training courses are available for drivers of any vehicle category to assist with skills fade and improve driving competence.

The IMI Roadside Safety programme is a blended learning course consisting of an online learning package followed by a face to face training and assessment session. The course is aimed at Truck and Light Vehicle Tyre Technicians involved with working on the roadside and whilst not essential, we advise that candidates should have completed a recognised course in Heavy or Light Vehicle Tyre Fitting and possess good communication skills. Successful candidates will receive the IMI Quality Approved Award in Roadside Safety as well as the NTDA REACT Licence to Work on the Roadside. Course Details:  Online training program to be worked through at the candidates own pace. Up to one day training and assessment session. Course Content Theoretical Identification of essential service vehicle equipment Personal Protective Equipment to be used at the roadside The main requirements of PAS43 and the REACT licence Pre-breakdown planning and dynamic risk assessment Attending a breakdown and making the area safe Clearing up and leaving the scene safely Practical Service vehicle inspection and equipment condition reporting Simulated attendance a motorway breakdown for the purposes of making the scene safe (please note, there is no wheel removal or tyre fitting activities included in this course or test. (Please view the High Performance Car Tyre or Truck Tyre Fitting courses for this) IMI assessment and test A multi-choice theory question paper Two practical assessments, observed by an IMI approved assessor covering a service vehicle and equipment inspection and attending a simulated motorway breakdown. It is required that each candidate supply their own fully equipped service vehicle for this assessment What’s included Fully qualified and experienced trainers Online training program Examinations, Certification and REACT licence fees To find out more, please use the live chat function, visit our contact page or call us on 024 76325880

The Professional Driver 7-Hour Course for One Day Course Introduction: This one-day course is designed to provide professional drivers with the essential knowledge and skills required to operate their vehicles safely and efficiently. The course covers a wide range of topics, including: Licence requirements Personal protective equipment (PPE) Vehicle pre-trip inspections Safe and economic driving Bridge strike avoidance and route planning Vehicle security Overnight parking The course is delivered in a classroom/remote location setting and includes a mix of lectures, interactive discussions, and practical exercises. Participants will also have the opportunity to network with other professional drivers and share their experiences. Who should attend? This course is suitable for all professional drivers, regardless of experience level. It is particularly beneficial for drivers who are new to the profession, as well as drivers who are looking to refresh their skills and knowledge. What will you learn? Upon completion of this course, participants will be able to: Understand and comply with all applicable licence requirements for professional drivers Identify and use the correct PPE for different driving tasks Conduct pre-trip vehicle inspections to identify any potential problems Drive safely and economically, taking into account road conditions, traffic, and fuel efficiency Avoid low bridges and plan routes effectively Secure vehicles to prevent theft and hijacking Park vehicles safely overnight We look forward to seeing you there! 😃

The Professional Driver 7-Hour Course for One Day Course Introduction: This one-day course is designed to provide professional drivers with the essential knowledge and skills required to operate their vehicles safely and efficiently. The course covers a wide range of topics, including: Licence requirements Personal protective equipment (PPE) Vehicle pre-trip inspections Safe and economic driving Bridge strike avoidance and route planning Vehicle security Overnight parking The course is delivered in a classroom/remote location setting and includes a mix of lectures, interactive discussions, and practical exercises. Participants will also have the opportunity to network with other professional drivers and share their experiences. Who should attend? This course is suitable for all professional drivers, regardless of experience level. It is particularly beneficial for drivers who are new to the profession, as well as drivers who are looking to refresh their skills and knowledge. What will you learn? Upon completion of this course, participants will be able to: Understand and comply with all applicable licence requirements for professional drivers Identify and use the correct PPE for different driving tasks Conduct pre-trip vehicle inspections to identify any potential problems Drive safely and economically, taking into account road conditions, traffic, and fuel efficiency Avoid low bridges and plan routes effectively Secure vehicles to prevent theft and hijacking Park vehicles safely overnight We look forward to seeing you there! 😃

Car Mechanic and Repair Training | Car Restoration | Hybrid Vehicle Training | Supercharger Automobile Engineering | Engine Lubricant System | Electric Motors | Motorbike Repairing

Boost Your Career By Enrolling In This Car Mechanic Bundle To Overcome Your Challenges! 08 in 1 Car Mechanic Bundle Improve your knowledge and enhance your skills to succeed with this Car Mechanic bundle. This Car Mechanic bundle is designed to build your competent skill set and enable the best possible outcome for your future. Our bundle is ideal for those who aim to be the best in their fields and are always looking to grow. This Car Mechanic Bundle Contains 08 of Our Premium Courses for One Discounted Price: Course 01: Car Mechanic and Repair Training Course 02: Motorbike Mechanic & Servicing Course 03: Hybrid Vehicle Expert Training Course 04: Engine Lubricant System Training Course 05: Bicycle Mechanic Training Course 06: Portable Appliance Testing (PAT) Course 07: PUWER Course 08: Ladder Safety All the courses under this Car Mechanic bundle are split into a number of expertly created modules to provide you with an in-depth and comprehensive learning experience. Upon successful completion of the Car Mechanic bundle, an instant e-certificate will be exhibited in your profile that you can order as proof of your new skills and knowledge. Stand out from the crowd and get trained for the job you want. With this comprehensive Car Mechanic bundle, you can achieve your dreams and train for your ideal career. This bundle covers essential aspects in order to progress in your chosen career. Why Prefer Us? All-in-one package of 08 premium coursesbundle Earn a certificate accredited by Get a free student ID card! (£10 postal charges will be applicable for international delivery) Globally accepted standard lesson planning Free Assessments 24/7 tutor support. Start your learning journey straightaway! *** Course Curriculum *** Our bundle courses consist of the following learning modules: Course 01: Car Mechanic and Repair Training Module 01: Safety Rules & Introduction to Tools Module 02: Maintenance Module 03: Dashboard Indicator Lights Module 04: Tyres Module 05: Internal Combustion Engines & Engine Oil Module 06: The Cooling System Module 07: The Fuel System Module 08: The Electrical System Module 09: The Drive Train Module 10: Brakes Module 11: Buying a Car Assessment Process Once you have completed all the courses in the Car Mechanic bundle, you can assess your skills and knowledge with an optional assignment. Our expert trainers will assess your assignment and give you feedback afterwards. CPD 80 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This bundle is suitable for everyone. Requirements You will not need any prior background or expertise. Career path This bundle will allow you to kickstart or take your career in the related sector to the next stage. The certificate will strengthen your CV and assist you in finding work in the related industry, as: Engineers Designers Mechanic Car Enthusiast Automotive Mechanic Salesperson Vehicle inspector Certificates CPDQS Accredited Certificate Digital certificate - £10 Upon passing the Bundle, you need to order to receive a Digital Certificate for each of the courses inside this bundle as proof of your new skills that are accredited by CPDQS. CPDQS Accredited Certificate Hard copy certificate - £29 Upon passing the Bundle, you need to order to receive a Hard Copy certificate for each of the courses inside this bundle as proof. If you are an international student, then you have to pay an additional 10 GBP as an international delivery charge.