8744 Opera courses

Experience safer urban roads with our FORS Approved Virtual Reality Safe Urban Driving Training. Our immersive program empowers drivers to navigate bustling city streets alongside vulnerable road users, fostering a culture of road safety. With a seven-hour DCPC-approved course, participants gain valuable insights and skills for responsible driving. Invest in your drivers' safety and meet compliance requirements while protecting lives on the road. Elevate road safety with our innovative VR training. Learn more at www.totalcompliance.co.uk

Any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulations). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. F Gas regulations Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

Platelet-rich Plasma (PRP) treatments Nationally Recognised Qualification No previous experience or qualifications needed Open College Network Accreditation Level 4 (as required for minimally invasive procedures) Covers standards set by HEE Employed (salon) or Self-Employed opportunities Basic understanding of English language required OPEN TO ALL APPLICANTS

This course provides a comprehensive introduction to foodborne viruses, focusing on their properties, transmission, and impact on food safety. Designed for professionals at all levels, it covers detection methods, contamination risks, and prevention strategies to help businesses mitigate viral threats in food supply chains. Delivered by an industry expert, the course includes an interactive Q&A session for deeper insights. No prior knowledge is required.

Are you a fresher and looking to start your career as a phlebotomist or are you currently employed in the healthcare profession and looking to expand your phlebotomy skills in order to build a rewarding career in this field? Or simply want to understand the blood collection procedure and gather skills to handle and transport specimens securely. This comprehensive phlebotomy course online is ideal for you! Course Highlights You will be given ample opportunity to practise on the Manikin Face-to-Face Practical Training National Occupational Standard for Obtaining Venous Blood Sample Demonstrate appropriate infection control principles when performing training 3 Hours of Remote Theoretical Learning 8 Hours of Face-to-Face Training Sessions at London Centre Once confident at taking blood from the manikin you will have the opportunity to take blood from a fellow participant with consent. Accredited by the CPD Certification Designed by expert healthcare professionals. This extensive course covers the following credentials: Venepuncture process Vial labelling Blood-taking techniques Safety protocols, Needle safety techniques Processing of blood samples Prioritising patients System of needle measurement Maintaining the accuracy of specimen labels Controlling and preventing infection Techniques for Preserving Clinical Proficiency Legal repercussions of bad behaviour Causes of infection and needed records Identify the veins used for Venepuncture (Phlebotomy) Solving issues might arise during the actual operation Classroom-Based Phlebotomy Training Course To ensure effective training, our classroom-based learning is divided into two parts: Remote theoretical learning (online) For the first part of our phlebotomy course online, we provide in-depth theoretical learning which you can complete from the comfort of your home. You can go on to the practical learning portion once the coursework and assessments have been successfully completed. Face-to-face practical learning (designated London-based office, with a similar structure at Swindon, Bristol and Birmingham offices) As part of the practical training, you will receive practical demonstrations and hands-on experience to justify your role. The practical learning part is divided into two learning slots with each weighing 4 hours of time: First 4 hours session: Through practical demonstration using a mannikins, you will be taught how to smoothly draw blood, reduce risks, and control the patient’s reaction. Last 4 hours of sessions: You will then have the chance to draw blood from fellow participants with consent while being closely supervised. Phlebotomy | Online Course | Lead Academy - Trailer Who is this Phlebotomy Training Course for? This phlebotomy course is primarily aimed at: Phlebotomists Health Visitors Physiotherapists Occupational Therapists Healthcare professionals Nurses, midwives, pharmacists and doctors Freshers looking to begin their career as a phlebotomist Anyone looking to enhance their blood-sampling skills Whether you are a fresher looking to kickstart your career in the field of phlebotomy or a practising healthcare looking to enhance your phlebotomy skills, this course will help you achieve your professional aspirations by all means. Entry Requirements There are no academic entry requirements for this online phlebotomy course, and it is open to students of all academic backgrounds. Entry Requirements There are no academic entry requirements for this blood taking course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method In this phlebotomy course learners will be assessed through observation. That means during the practical training you will be observed by the supervisor/trainer. Upon successful demonstration of blood sampling and blood draw, you will be awarded a CPD-accredited certificate that is accepted by thousands of professional bodies and government regulators here in the UK and around the world. We also offer face-to-face practical training for Cannulation Training, Catheterisation Training, and Advanced / Competency Phlebotomy Training Course Curriculum Module 1: Introduction Module 2: Steps Before Withdrawing Blood (Venepuncture) Module 3: Basic Anatomy Lessons Module 4: Dos and Donts for Vein Selection Module 5: Preparation for Venepuncture Module 6: Managing Patient’s Expectations Module 7: Complications Issues During Venipuncture Module 8: Processing of Blood Samples Module 9: Conclusion Recognised Accreditation This phlebotomy course is accredited by Continuing Professional Development (CPD). CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing the phlebotomy course, you would be a potential candidate in your respective field.

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

We deliver CSCS approved courses from the Base Business Space in Hull every Monday and Friday. Other days available on request! We also have access to a onsite CITB Test Centre! We have been supporting clients gain a CSCS Labourers and Skilled cards for over 10 years!

One day e-ALS Course. The ALS course is designed for healthcare professionals who would be expected to apply the skills taught as part of their clinical duties.

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6) FDSc (Foundation Degree Level) qualification Nationally Recognised certificate Dually accredited: Open College Network and CPD Covers both aspirated and evacuated systems Covers specialised blood collection systems & methods Classroom or Virtual Classroom learning options Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep) Complete your training from beginner to advanced level This course either follows on from our Introduction to Phlebotomy Course or can be combined with our introductory course as part of a course package (see below) Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.

Day 1 Solenoids and actuators, principles of operation and maintenance State precautions that may be necessary when removing cores from energised AC solenoids Transformers, sizing, applications and uses Heaters, applications, uses and safety precautions to be observed Temperature controllers, various types, principles of operation and uses Thermal sensors, various types, principles of operation and uses. Day 2 Proximity devices, limit switches and proximity switches, various types, principles of operation and uses Practical workshop, gaining an understanding of typical connections of various proximity devices and the range of available supplies catered for, voltage levels and current type Development of a typical simple control system using push buttons, proximity devices, relays and indicator lamps. Day 3 Protection against overcurrent Protective devices, various types, suitability and uses Earthing, including principles of protection against indirect shock Undervoltage protection. Day 4 Cable and core termination techniques, including crimping and soldering Practical workshop terminating YY, SY, SWA and MICC cable Testing, basic principles of circuit protective conductor testing and insulation resistance testing, instruments used and expected values Practical workshop testing cables terminated previously and testing cables with faults on test rig. Day 5 Fault finding, safety precautions and principles Practical workshop on fault rigs Root cause analysis PPM and maximising uptime