Nottinghamshire

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.
Have a working knowledge of the manufacturer’s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.
Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.
Safely mount and dismount the machine configure the machine for travel.
Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.
Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.
Travel with platform raised (where applicable)
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test. 
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant. 

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS MEWP Boom (N108)

Loughborough

<div>
		

		<div>
			
			One of the keys to success today is our ability to effectively influence others. 
			<div> 2 Hours</div>
			<div> £378.00 incl. VAT</div>
			
			
		</div>
	</div>

	

	<div id="filters">
		
		
	</div>

	

 <div>

		
		 
		

		<div></div>

		<div>
			Want to run this event in-house? Enquire about running this event in-house 
			
		</div>

		<div>
			Interested in attending? Have a suggestion about running this event near you? Register your interest now
			
		</div>
	</div>
	<div></div>
	
		
 <div>
			
		</div>
				

	
		<h3>Description</h3>
		One of the keys to success today is our ability to effectively influence others. Using the techniques that you learn on this workshop will enable you to influence to change the behaviour of others and produce an effective result without the apparent exertion of direct command or power.
Negotiations can take many forms and can be time-consuming and exhausting. Most employees negotiate without having received any formal training and this can lead to the loss of the object of the negotiation or obtaining a result which is less than satisfactory.
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,305 Plus VAT

	
		<h3>Modules/Lessons</h3>
		Outcomes: 
<ul>
<li>Detail the factors which impact on your ability to Influence</li>
<li>List the six principles of Persuasion</li>
<li>Describe the difference between Influence and Power</li>
<li>State the five potential outcomes for a Negotiation</li>
<li>Explain what to consider when planning to Negotiate</li>
</ul>
Content:
<ul>
<li>The Situations we Face - The Four Circles Model</li>
<li>Leadership is an Influencing process</li>
<li>The difference between Influence and Power</li>
<li>The two factors we judge people on</li>
<li>The Four Elements of Trust</li>
<li>The Six Principles of Influence</li>
<li>Knowing your Outcome</li>
<li>Five Potential Results of a Negotiation</li>
<li>Want v's Need</li>
<li>Walk Away</li>
</ul>
The Situations we Face - The Four Circles Model
<ul>
<li>Understanding how to manage situations we can/can't control, can/can't influence and the choices that we have for our behaviour.</li>
<li>The difference between a reaction and a response</li>
</ul>
What is Leadership?
<ul>
<li>Defining leadership</li>
<li>Are Influence and Power the same?</li>
<li>The role played by trust and respect</li>
<li>The Blanchard ABCD Model of Trust</li>
</ul>
The Six Principles of Persuasion
<ul>
<li>Outlined in 'Influence - The Psychology of Persuasion' by Robert Cialdini</li>
<li>How can we use the principles?</li>
<li>Knowing Your Outcome - thinking backwards rather than forwards</li>
</ul>
Negotiation
<ul>
<li>What are the five potential outcomes of a negotiation?</li>
<li>Negotiation and Motivation</li>
<li>Separating Wants from Needs</li>
<li>The importance of knowing when to walk away</li>
</ul>

One of the keys to success today is our ability to effectively influence others. 
2 Hours £378.00 incl. VAT
Want to run this event in-house? Enquire about running this event in-house 
Interested in attending? Have a suggestion about running this event near you?
Register your interest now
Description

One of the keys to success today is our ability to effectively influence others. Using the techniques that you learn on this workshop will enable you to influence to change the behaviour of others and produce an effective result without the apparent exertion of direct command or power.
Negotiations can take many forms and can be time-consuming and exhausting. Most employees negotiate without having received any formal training and this can lead to the loss of the object of the negotiation or obtaining a result which is less than satisfactory.
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,305 Plus VAT

Modules/Lessons

Outcomes: 
Detail the factors which impact on your ability to Influence
List the six principles of Persuasion
Describe the difference between Influence and Power
State the five potential outcomes for a Negotiation
Explain what to consider when planning to Negotiate
Content:
The Situations we Face - The Four Circles Model
Leadership is an Influencing process
The difference between Influence and Power
The two factors we judge people on
The Four Elements of Trust
The Six Principles of Influence
Knowing your Outcome
Five Potential Results of a Negotiation
Want v's Need
Walk Away
The Situations we Face - The Four Circles Model
Understanding how to manage situations we can/can't control, can/can't influence and the choices that we have for our behaviour.
The difference between a reaction and a response
What is Leadership?
Defining leadership
Are Influence and Power the same?
The role played by trust and respect
The Blanchard ABCD Model of Trust
The Six Principles of Persuasion
Outlined in 'Influence - The Psychology of Persuasion' by Robert Cialdini
How can we use the principles?
Knowing Your Outcome - thinking backwards rather than forwards
Negotiation
What are the five potential outcomes of a negotiation?
Negotiation and Motivation
Separating Wants from Needs
The importance of knowing when to walk away


Mpi Learning - Professional Learning And Development Provider

One of the keys to success today is our ability to effectively influence others.

Influencing Skills

General Admission

Much of what we might think of as leadership&nbsp;is often rooted in control and hierarchy. Whilst there might be a place for this in certain scenarios, it cannot be the only leadership tool in your armoury. Getting the best from a team requires more than simply dictating work or having the most knowledge.To enable others to do their best work, the best leaders coach, nurture and inspire their people. This relationship isn&rsquo;t forged overnight, but sets great teams and leaders apart and is essential for great collective performance.We explore how you can create a culture of great performance and how to enable others without micromanaging. &nbsp;By fostering psychological safety, creating effective communication and exploring how to effectively manage your reactions,&nbsp;From Boss to Coach&nbsp;is a game-changing module for those with leadership aspirations.&nbsp; Course information:Minimum 4 attendees. Please note that cost quoted is per person.

Much of what we might think of as leadership is often rooted in control and hierarchy. Whilst there might be a place for this in certain scenarios, it cannot be the only leadership tool in your armoury. Getting the best from a team requires more than simply dictating work or having the most knowledge.
To enable others to do their best work, the best leaders coach, nurture and inspire their people. This relationship isn’t forged overnight, but sets great teams and leaders apart and is essential for great collective performance.
We explore how you can create a culture of great performance and how to enable others without micromanaging. By fostering psychological safety, creating effective communication and exploring how to effectively manage your reactions, From Boss to Coach is a game-changing module for those with leadership aspirations. 

Course information:
Minimum 4 attendees.
Please note that cost quoted is per person.


4and20Million.

Managing others effectively by creating an environment of psychological safety and nurturing development & growth.

From Boss to Coach (Leadership training)

Travel excluded. Cost per person. Minimum 4 x attendees. 

General admission

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Check all emergency lowering functions</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out accessing tasks, at various points up to full operating height</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Use platform extension section</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Check all emergency lowering functions
Safely mount and dismount the machine
Configure the machine for travel
Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas
Conduct all necessary safety checks at the work area, including overhead and underground hazards
Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks
Carry out accessing tasks, at various points up to full operating height
Travel with platform raised (where applicable)
Use platform extension section
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS MEWP Scissor Lift (N109)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used and other relevant sources of information</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used and other relevant sources of information
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Telescopic Handler (N010)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N204 Forward Tipping DumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping dumper use ➢ Prepare the forward tipping dumper for use and operate safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Attach and set trailers, ready for operation ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N204 Forward Tipping Dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping dumper use
➢ Prepare the forward tipping dumper for use and operate safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Attach and set trailers, ready for operation
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Dumper (N204)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N139 Forward tipping mini dumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping mini dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently ➢ Attachments set correctly ready for operation ➢ Environmental considerations ➢ Storage and transport of forward tipping mini dumper / implements / attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N139 Forward tipping mini dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping mini dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently
➢ Attachments set correctly ready for operation
➢ Environmental considerations
➢ Storage and transport of forward tipping mini dumper / implements / attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Mini Dumper (N139)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category 214 Road RollerIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for roller use ➢ Prepare the roller for use and operate machinery safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category 214 Road Roller
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for roller use
➢ Prepare the roller for use and operate machinery safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Road Roller (N214)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 4 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N205It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for rear tipping dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the rear tipping dumper for use &amp; operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 4 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N205

It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for rear tipping dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the rear tipping dumper for use & operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Rear Tipping Dumper (N205)

Who should attend&nbsp;This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).&nbsp;Course information Overview&nbsp;To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a basic understanding of the industry, the dangers of working in the industry and their &nbsp;responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be &nbsp;used&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Be able to locate and identify driving, steering and braking controls in each travel mode and &nbsp;explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative &nbsp;requirements&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Start and stop the engine and safely move the machine off and stop it safely in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Configure the machine for travel and maneuver it safely laden and unladen, in open and &nbsp;confined areas in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out &nbsp;lifting and load handling tasks using each travel mode as appropriate</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;"> Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;"> Load and unload external transport safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate knowledge and understanding of loading and unloading procedures for machine &nbsp;transportation&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures&nbsp;</li></ul>Entry Requirements&nbsp;For learners applying for the NPORS CSCS Card, or for those requiring the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

Who should attend
 This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
 Course information Overview
 To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify driving, steering and braking controls in each travel mode and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely in each travel mode
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas in each travel mode
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks using each travel mode as appropriate
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements 
For learners applying for the NPORS CSCS Card, or for those requiring the 'HS&E TESTED Logo' displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

NPORS Multi Directional Lift Truck (N135)

Droitwich Spa

Southampton

Portsmouth

Rotherham

Manchester

Leeds

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Luton

Hull

Northampton

Berkshire

Bedford

Liverpool 

Swansea

Essex

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

3-Day Foundational Training | Open to All | No Experience Needed
Ready to remember what you're truly capable of?
This transformational 3-day seminar will guide you into the heart of the ThetaHealing® technique—a powerful modality that helps you rewire your inner world and reconnect with the energy of Creation itself.
Whether you're just beginning your healing path, deepening your intuitive abilities, or feeling the pull to support others—this is a profound next step.
What You’ll Experience + Learn:
Deepen your connection with the Creator of All That Is—the energy that moves through everything
Unlock and activate your intuition through the Theta brainwave, a meditative state linked to insight, healing, and peace
Learn to scan and heal energetically—for yourself and others
Identify and shift subconscious beliefs on all four levels: core, genetic, history, and soul
Manifest from clarity and alignment, not just desire
Understand the Seven Planes of Existence and how to navigate them spiritually and energetically
Harness the power of your thoughts, feelings, and words to reshape the life you're living into one that reflects your soul’s truth
What’s Included:
3 full days of live training (in person or online)
ThetaHealing® Basic DNA Book + Manual
Practitioner Certification upon completion
Lifelong tools to continue your healing, expansion, and service
All you need is an open heart, a curious mind, and a willingness to grow.
PREREQUISITES: None. Just show up as you are.
(And maybe be ready to leave changed.)

Dua Mihaela Gordan

Theta Healing Basic DNA

total

deposit

Kingston upon Hull

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601) CLASSROOM or VIRTUAL CLASSROOM (with online theory)</h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learn how to administer vaccines or injections ...&nbsp;</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Nationally Recognised Qualification</li><li fr-original-style="" style="box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</li><li fr-original-style="" style="box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</li><li fr-original-style="" style="box-sizing: border-box;">Covers all steps to safely perform a vaccination</li><li fr-original-style="" style="box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</li><li fr-original-style="" style="box-sizing: border-box;">Includes B12, Vitamin C and other treatments</li><li fr-original-style="" style="box-sizing: border-box;">Essential qualification for all injections</li><li fr-original-style="" style="box-sizing: border-box;">Basic understanding of English language required</li><li fr-original-style="" style="box-sizing: border-box;">OPEN TO ALL APPLICANTS</li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;">About this course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learning Outcomes</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">After the course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">PART 1 - Theory: complete online at home or work and download a certificate of completionPART 2 - Skills and Practical Development: Attend in the Classroom or Virtual ClassroomVaccination - all essential vaccines including Covid-19, Flu and other annual vaccinesInjections - Aesthetics - B12, Vit C etc.78 UK &amp; Eire training locationsOCN Accredited at Level 4 (FDSc)Medical training standards throughoutSkills for Health &amp; WHO compliantLearning Outcomes<div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;All theory and practical skills required to perform a safe procedureCovers all essential theory and skill-set development to meet medical standardsUnderstand the procedures used to set up &nbsp;a manage and administer a vaccinePost-injection management and how to avoid critical complicationsCorrect client care and aftercareIncludes legal, consent and documentationAfter the course<div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)Correct client management before, during injection and safe after-careUnderstanding equipment types and appropriate choicesUnderstand vaccine management controlAppreciate legal and professional responsibilitiesOffer injection therapies to clients - vitamin supplementsAdminister in hospitals, GP Surgeries and Outreach Centres</div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Broxburn

<h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>2024 Dates:&nbsp;October Week 1 - 14th, 15th, 16th / Week 2 - 23rd &amp; 24th&nbsp;2025 Dates:&nbsp;January&nbsp;Week 1 - 13th, 14th 15th /&nbsp;January&nbsp;Week 2 - 20th &amp; 21stApril&nbsp;Week 1 - 22nd, 23rd&nbsp;&amp; 24th / April&nbsp;Week 2 - 29th &amp; 30thEmber Compliance is delighted to offer a new FD&amp;FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&amp;FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&amp;FA systems for non-domestic buildings BS 5839-1: 2017.As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme.&nbsp;Details of the course are as follows:Module 1: Introduction to BS 5839-1 Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&amp;FA systems requirements within the boundaries of the various legal frameworks within the UK. Module 2: Design -BS 5839-1 In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements. Module 3: Installation -BS 5839-1 This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation. Module 4: Commissioning - BS 5839-1 This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.Module 5: Maintenance - BS 5839-1 This module explores the process of maintenance, the requirements of inspection &amp; servicing existing systems and how the maintainer may deal with non-conformities with the standard.Exam - L3 Award in the Requirements of FD&amp;FA Systems for Non-Domestic Buildings BS 5839-1: 2017 The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&amp;FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.<div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Notes:</div>Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilatorAdditionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/80ddaf3c-277e-490d-aad9-f53db6cf9e22/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>October Dates:&nbsp;Week 1 - 14th, 15th, 16th&nbsp;Week 2 - 21st &amp; 22nd

Online courses take 5 days and are spread over two weeks.
2025 Dates: 
June Week 1 - 30th, 1st & 2nd July / Week 2 - 10th & 11th July
July Week 1 - 14th, 15th & 16th / Week 2 - 21st & 22nd July
September Week 1 - 1st, 2nd, 3rd / Week 2 - 24th & 25th September
September Week 1 - 29th, 30th & 1st October / Week 2 - 6th & 7th October

Ember Compliance is delighted to offer a new FD&FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.

As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme. 

Details of the course are as follows:
Module 1: Introduction to BS 5839-1
Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&FA systems requirements within the boundaries of the various legal frameworks within the UK.

Module 2: Design -BS 5839-1
In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements.

Module 3: Installation -BS 5839-1
This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation.

Module 4: Commissioning - BS 5839-1
This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.

Module 5: Maintenance - BS 5839-1
This module explores the process of maintenance, the requirements of inspection & servicing existing systems and how the maintainer may deal with non-conformities with the standard.

Exam - L3 Award in the Requirements of FD&FA Systems for Non-Domestic Buildings BS 5839-1: 2017
The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.

Notes:
Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilator
Additionally, please ensure that you have a non-scientific calculator with you for the exam. 
Calculators on phones are not permitted.

Online courses take 5 days and are spread over two weeks.
October Dates: 
Week 1 - 14th, 15th, 16th 
Week 2 - 21st & 22nd

Ember Compliance

Fire Alarm

Professional Development

Engineer

Continuous Professional Development (CPD)

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.

FD&FA BS5839-1 RQF Certified 5-Day Combined Course - 2 Part Course

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Explain the steps to managing an audit programme</li><li fr-original-style="" style="box-sizing: border-box;">Describe auditing fundamentals and techniques</li><li fr-original-style="" style="box-sizing: border-box;">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</li><li fr-original-style="" style="box-sizing: border-box;">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</li></ul>

Course Summary

This official BRCGS Food Safety issue 9 Lead Auditor course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of Global Food Safety Initiative (GFSI) scheme auditors.

Active learning will be used throughout the course utilising case study-based individual and group activities to encourage critical thinking and help explain how auditors will audit against the Standard.

Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete training must be arranged with a BRCGS approved certification body.

This course is part of the BRCGS Professional recognition programme.

Key learning objectives

Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS.

Who should attend

Those interested in becoming a BRCGS Auditor and who do not hold a Lead Assessor qualification*
Compliance/Technical Managers and personnel (including those from retailing and manufacturing)
Quality Managers and personnel
Operations Managers
Internal audit personnel
Site staff wishing to gain auditing skills and a deeper understanding of the Standard
Importers and exporters of food products
Foodservice staff
Retailers
Industry Consultants
Current BRCGS Auditors and Auditors of other schemes
Certification Body personnel (including scheme managers and those reviewing reports and /or corrective actions)


*Those interested in becoming a BRCGS Auditor who already hold a Lead Assessor qualification (eg FSSC 22000, IFS Food, SQF, etc) may choose to attend the 3-day Food Safety Auditor course instead of the 5-day Food Safety Lead Auditor course

Pre-requisites

To have a working knowledge of quality management systems and auditing within the relevant manufacturing sector
To have completed a hazard analysis and critical control points (HACCP) course of at least two days’ duration. If you need HACCP or HARA training, we propose various suitable courses. Have a browse at the website or get in touch for advice :)
To have carefully reviewed the Food Safety standard (appendices & glossary included) before the course starts. You can download a free (locked PDF) copy of the standard here.

Programme Outline

Day 1 | Welcome and introduction | Scope and format of the Standard | Requirements of the Standard
Day 2 | Requirements of the Standard (continued)
Day 3 | Audit protocol | BRCGS compliance and support | Auditor requirements | Practical exercises
Day 4 | Auditing fundamentals | Practical exercises
Day 5 | Auditing fundamentals (continued) | Practical exercises | Revision | Course exam

Instructor credentials

This training course is delivered by experienced BRCGS ‘approved training partners’ (ATPs) and ‘approved virtual trainers’ (AVTs). This is our lovely team of trainers.

ASK SONIA LTD

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

Clay Cross

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

1611 Courses in Sheffield

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

Influencing Skills

By Mpi Learning - Professional Learning And Development Provider

From Boss to Coach (Leadership training)

By 4and20Million.

NPORS MEWP Scissor Lift (N109)

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler (N010)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Dumper (N204)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Mini Dumper (N139)

By Dynamic Training and Assessments Ltd

NPORS Road Roller (N214)

By Dynamic Training and Assessments Ltd

NPORS Rear Tipping Dumper (N205)

By Dynamic Training and Assessments Ltd

NPORS Multi Directional Lift Truck (N135)

By Dynamic Training and Assessments Ltd

Search By Location