526 Health & Safety At Work courses

This 1 hour on-line training seminar provides an opportunity for employers, HR managers, supervisors, and team leaders to learn how domestic abuse can impact on an employee and the business as well as the next steps to support your staff and protect your business.

About this course RACHP School offer 4 days training with day 5 for theory and practical examination in our F-Gas 2079 Cat 1. Morning sessions are spent learning theory, while afternoon sessions are spent carrying out practical tasks such as recovering refrigerant from systems, removing a section, carrying out a braze with flared connections, pressure testing, vacuuming system, recharging and recording on services sheets (including sub-cooling and superheat measurements). This is a safe handling of refrigerants course so correct purge process will be taught. The theory exam is a closed book 80-minute online exam which requires a 60% (24 correct answers) pass mark. This qualification allows engineers to legally work on refrigeration systems under the EC 842/2006 F-Gas regulations. What is covered on this course? Expert instruction – Learn from experienced instructors with deep knowledge of F-Gas 2079/11 & ODS regulations. Hands-on training: Gain practical skills through real-world scenarios. The Practical elements will include: Correct PPE and understanding of the Health & Safety at Work act. Correct isolation procedures of a system before carrying out any works. Safe handling of refrigerants, including correct procedure to purge hose lines correctly. Removing a section of pipe, cutting, expanding and flaring a new piece of pipe with a braze that will be pressure tested to PED regulations. Vacuuming the system, recharging and recording on services sheets subcooling and superheat measurements, including air on and air off and working out the delta T in the Kelvin scale. Understand the pressure/temperature relationship. Working out the compressor ratio and evaluating if the system is running within design parameters, and if not, what can be done to improve efficiency. Correct waste disposal procedures of waste oil/refrigerant. A “Peel Test” of a brazed joint that the student will carry out. There are 2 exams, one theory and one practical both held on the Friday.

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.

Enhance your dental practice's safety and compliance with our 3-hour CPD accredited Dental Practice Legionella Responsible Person Course. Designed for Practice Owners, Registered Managers, and Senior Infection Control Leads, this online course offers expert guidance on legionella management, aligning with HSE ACOP L8, HSG274 Part 2, HTM 04-01, and HTM01-05 standards. Gain advanced understanding and confidence in legionella prevention in dental settings. Receive a GDC-compliant CPD Certificate upon completion. Join our live sessions led by skilled instructors for a transformative learning experience in dental health and safety management.

Level 5 Health & Safety at Work Course Online Every year, workplace accidents and injuries cost businesses millions of dollars and thousands of hours. They also have a significant and often lifelong impact on workers. Introducing a safety culture into your organisation, where safety is valued as an integral part of business operations, saves time and money and builds a committed, loyal, and healthy workforce. Our Level 5 Health & Safety at Work course will lay the foundation for you to start building a safety culture. The course covers a broad introduction to workplace health and safety, along with the value of establishing a safe working culture. Students will also learn to ensure their respective businesses and workplaces comply with all relevant laws and legislation. The Level 5 Health & Safety at Work course provides lessons, modules, and quizzes to gain knowledge, and at the end, a Professional Certificate that assists in career development in professional life. Why choose this Level 5 Health & Safety at Work course from the School of Health Care? Self-paced course, access available from anywhere in the world. High-quality study materials that are easy to understand. Course developed by industry experts. After each module, there will be an MCQ quiz to assess your learning. Assessment results are generated automatically and instantly. 24/7 support is available via live chat, phone call, or email. Free PDF certificate after completing the course. [ Note: Free PDF certificate as soon as completing the This Level 5 Health & Safety at Work Course] Level 5 Health & Safety at Work Course Online This Level 5 Health and Safety at Work course consists of 12 modules. Course Curriculum of Level 5 Health & Safety at Work Course Module 01: Foundations of Health and Safety at Work Module 02: Managing Health and Safety Module 03: Organising for Health and Safety Module 04: Health and Safety Culture Module 05: Health and Safety Policy Module 06: Risk Assessment Module 07: Workplace Hazards and Risk Control Module 08: Accidents and Emergencies Module 09: Vehicle Hazards and Risk Control Module 10: Fire Prevention and Protection Module 11: Electrical Safety Module 12: Managing the Safety Function Assessment Method of Level 5 Health & Safety at Work Course After completing Working in Level 5 Health & Safety at Work Course, you will get quizzes to assess your learning. You will do the later modules upon getting 60% marks on the quiz test. Apart from this, you do not need to sit for any other assessments. Certification of Level 5 Health & Safety at Work Course After completing the Working in Level 5 Health & Safety at Work course, you can instantly download your certificate for FREE. The hard copy of the certification will also be delivered to your doorstep via post, which will cost £13.99. Who is this course for? Level 5 Health & Safety at Work Course Online This Level 5 Health & Safety at Work could be extremely beneficial to employees at all levels. From entry-level recruits to supervisors, managers, and business owners. Requirements Level 5 Health & Safety at Work Course Online To enrol in this Level 5 Health & Safety at Work Course, students must fulfil the following requirements: Good Command over English language is mandatory to enrol in our Level 5 Health & Safety at Work Course. Be energetic and self-motivated to complete our Level 5 Health & Safety at Work Course. Basic computer Skill is required to complete our Level 5 Health & Safety at Work Course. If you want to enrol in our Level 5 Health & Safety at Work Course, you must be at least 15 years old.

This one-day course is a must for all construction operatives! Not only is this a legal requirement under CDM 2015, but if your Company is accredited to CHAS or similar SSIP schemes you must be able to demonstrate that suitable training has been provided to your staff. The Construction Design & Management Regulations 2015 (CDM) sets the requirement for all workers to have the right skills, knowledge, training, and experience. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content Overview of the following regulations: • The Construction Design & Management Regulations 2015 (CDM) • Health & Safety at Work etc. Act 1974 • Work at Height Regulations 2005. • Control of Asbestos Regulations 2012 • Control of Substances Hazardous to Health Regulations 2002 (CoSHH) • Provision and Use of Work Equipment Regulations 1998 (PUWER) • Personal Protective Equipment at Work Regulations 1992 (PPE) Practical training in: • Abrasive Wheels • CoSHH • Working at Height (awareness) • Manual Handling (awareness). Prerequisites None - The course is intended either as an introduction or as a refresher. Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Certificate This course is covered by certification to provide to your Clients, CHAS (and other SSIP) as confirmation of training undertaken and is valid for 3 years. Instructions Cost includes: course notes, certification, lunch & refreshments. Directions Location Map

Fun, Interactive Level 3 Emergency First Aid (RQF) training course

QA Level 3 Award In Emergency First Aid At Work (RQF) Full day course Gives learners the knowledge and skills to be an emergency first aider Recommended by HSE for low-risk workplaces Course Contents: The Roles and Responsibilities of an Emergency First Aider Assessing an Incident Minor Injuries Cuts, Grazes and Bruises Minor Burns and Scalds Managing an Unresponsive Casualty CPR Safe Use of an AED (Automated External Defibrillator) Choking Seizures Wounds and Bleeding Shock Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work The estimated cost of injuries and ill health last year was £15 billion The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes carrying out a risk assessment, appointing a suitable amount of first aiders and providing adequate first aid training Typically, first aiders will hold a valid certificate in either First Aid at Work (FAW) or Emergency First Aid at Work (EFAW) Our QA Level 3 Award in Emergency First Aid at Work (RQF) - EFAW - training course is the one recommended for first aiders in a low risk workplace Having the correct first aid provision in the workplace is not just a legal requirement, it is incredibly important for the safety of all members of staff! As this is a Regulated Qualification, employers can book this course for their employees in the safe knowledge that they have fulfilled their legal responsibilities for providing quality first aid training, without having to undertake any lengthy due diligence checks Accredited, Ofqual regulated qualification: Our Emergency First Aid at Work course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Emergency First Aid at Work Certificate fulfills the legal requirements and is a very good way to make sure you and your employees are trained in First Aid.The Ofqual Register number for this course is 603/2367/X

QA Level 3 Award In First Aid At Work (Annual Refresher) (RQF) Half day course How much do you still remember from your last first aid training course? Skills fade rapidly. This course is there to ensure learners retain the most important skills of saving a life. The Annual Refresher as recommended by HSE Course Contents: Assessing an Incident Managing an Unresponsive Casualty Recovery Position CPR Safe Use of an AED (Automated External Defibrillator) Choking Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work Are you already holding a valid Emergency First Aid at Work (EFAW) or First Aid at Work (FAW) Certificate? How much can you still remember a year later? HSE strongly recommends that first aiders undertake Annual Refresher training during any three year FAW/EFAW certification period. This will help qualified first aiders remain competent and keep up to date with any changes to first aid procedures. In just half a day, this course is an ideal way to satisfy HSE requirements whilst minimising disruption to the work day. Accredited, Ofqual regulated qualification: Our Emergency First Aid at Work Annual Refresher course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Emergency First Aid at Work Annual Refresher Certificate fulfils the legal requirements and is a very good way to make sure you and your employees keep your First Aid skills up to date.The Ofqual Register number for this course is 603/3154/9

Gain the skills and credentials to kickstart a successful career and learn from the experts with this step-by-step