• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

450 Engineering courses in Banbury delivered Live Online

PLC 5 Day

4.7(1243)

By Technique Learning Solutions

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3 & 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 5 Day
Delivered in Clay Cross + 1 more or Online + more
£500

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 10
Delivered in Clay Cross + 1 more or Online + more
£500

Site Management Safety Training Scheme (SMSTS) 5 day course

By SMC Safety Solutions

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course
Delivered in Stratford + 1 more or Online + more
£479

Health & Safety Awareness (for Green CSCS)

By SMC Safety Solutions

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Health & Safety Awareness (for Green CSCS)
Delivered in Chelmsford or Online + more
£135

2year Masters program with Experience certificate and Chartered Engineering status

By JP Jacobs International University

Mep Design Engineering

2year Masters program with Experience certificate and Chartered Engineering status
Delivered Online
£3,000

TACR 20

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 20
Delivered in Clay Cross or Online + more
£500

TACR 15

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 15
Delivered in Clay Cross or Online + more
£500

TACR 10

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 10
Delivered in Clay Cross or Online + more
£500

BSc (Hons) Motorsport Engineering

5.0(1)

By National Motorsport Academy

Study flexibly online with NMA for a BSc (Hons) Motorsport Engineering and open the door to an exciting career in motorsport. Study around work and family and choose your own start date. This course will teach you the specialist skills required by this competitive global industry.

BSc (Hons) Motorsport Engineering
Delivered OnlineFlexible Dates
£6,900

MSc Advanced Motorsport Engineering

5.0(1)

By National Motorsport Academy

Study online for the Master’s Advanced Motorsport Engineering and boost your motorsport career. With the ability to fit your studies around your existing career and family, the MSc is flexible and affordable. Start on any date and study when and where suits you!

MSc Advanced Motorsport Engineering
Delivered OnlineFlexible Dates
£8,950

Educators matching "Engineering"

Show all 7
North Oxfordshire Academy

north oxfordshire academy

Banbury

On behalf of our students, staff and governors, I am delighted to welcome you to North Oxfordshire Academy. We are a successful, oversubscribed 11-18 academy located in Banbury, Oxfordshire. North Oxfordshire Academy is an inclusive, friendly and diverse community with an ethos of high aspirations, high expectations and high achievement. We are proud to be part of United Learning, a group of secondary, primary and independent schools, whose motto is: ‘The best in everyone’ - a philosophy to which we wholeheartedly subscribe. Through a culture of nurture, support and mutual respect, we seek to challenge our students by encouraging them to take risks; to explore new ideas and to acknowledge that making mistakes is essential for learning. We focus on helping our students to become resilient learners and to develop the character and skills that prepare them for the future. During their time at North Oxfordshire Academy, our students learn to become confident, articulate, independent and resourceful young people; they develop the skills and qualities to enjoy successful and rewarding personal and working lives in an everchanging local, national and global landscape. Our students experience a broad and balanced curriculum focusing on academic excellence and education with character. In addition, they participate in an exciting range of extracurricular and sporting activities which enables them to explore and develop their talents and wider interests. We expect our students to work hard; to be kind and respectful to others and to strive to be the best version of themselves. Whether you are a potential student, parent or future employee, we hope our website provides you with useful information about North Oxfordshire Academy. If you would like to know more, or would like to visit us to see our school in action during the school day, please do not hesitate to get in touch.

Silverstone Utc

silverstone utc

Northamptonshire

I hope you and your family managed to have a relaxing summer and enjoyed the sunshine. Now that all of our students are back in school, I just wanted to introduce myself as the new Principal and to introduce you to my two new Deputies. I also wanted to take this opportunity to provide you with some updates on what lies ahead for Silverstone UTC. After 19 years in teaching, mostly at senior levels in a pastoral capacity, I take over the helm of the UTC at a very exciting time. This year’s KS4 admissions were the best ever and we currently have a waiting list of over fifty students wishing to join Year 10. Year 12 recruitment was very pleasing, with numbers up and the academic calibre of the intake being a testament to their hard work in their GCSE examinations. It is always so inspiring when young people rise to a challenge. With this year being the first year of formal KS4 examination since Covid, it is heartening to see how many have secured the GCSEs needed to take them onto their next steps. Both new year groups have made an excellent start and they and their Parents/Carers should be rightly proud. It is now vital that our students maintain that positivity and that they work alongside teaching staff to maximise their potential. With regard to the students who will be starting their final years in KS4 and KS5, I am confident that they are now entering those years better prepared for what lies ahead as the shadow of Covid appears to have lifted. Our job, alongside these students, is to ensure that we work hard to secure for them the academic success that will allow them to fulfil their future dreams and aspirations. The importance of maintaining strong academic outcomes and supporting these students is borne out by the destinations for this year’s leavers. Many secured jobs in organisations like BAE, Mercedes AMG, Boeing, Roll Royce, Scania, Torque Motorsport, DB Automotive and the Armed Forces whilst others went on to colleges and university to study a range of subjects such as Architecture, Finance, Automotive and Civil Engineering, Marketing and Renewable Technologies. In 2021 none of our students (by choice) were without opportunities in education, employment and training and it would appear, given early indications, that this is going to be the same for this year’s leavers. What an excellent outcome for our young people. It reflects the fact that students who attend the UTC are seen by many employers, outside agencies and educational institutions as much more work-ready than those from other educational establishments. The ethos of work-readiness and of developing the personal qualities of our students so they can flourish in their next stage is a core theme that is going to underpin the excellent educational opportunities that all the staff in the UTC will strive to provide for your sons and daughters. We are current fully staffed and my new deputies bring a wealth of knowledge and experience that will strengthen the Senior Leadership Team immensely. Mrs Angela Murphy is the Deputy for Curriculum and Achievement. She comes from Lord Grey and has been pivotal in securing them a good outcome in their recent inspection. Her reputation for expecting high standards in curriculum delivery and maximising achievement will, I am sure, lead to greater effectiveness of teachers and greater academic understanding for your sons and daughters. She will work alongside our Assistant Principal, Mr Simon Hollies, who brings a broad and in-depth understating of academic theories related to improving the quality of teaching and Learning. Between them and the staff at the UTC, I am wholly confident that best practise in the class will be the norm for all. My other new deputy, Mr William Jakeman, joins us as Head of Pastoral Care, which includes behaviour and safeguarding. Mr Jakeman has had many years’ experience in this role at the most senior levels and has a reputation of upholding the highest standards, whilst underpinning his expectations with a fairness, kindness and compassionate rigour that is respected by students who know he has their best interest at heart. It is also important to me and my team that wellbeing needs of SEN(D) and disadvantages are met as best as we can and to that end, this year, I have appointed a SEN(D) Teaching and Learning Lead (Ms Jessica Dixon) who will work alongside our SENCO (Ms Christie Norris) and our very talented Teaching Assistants (Mrs Lauren Leeson and Mrs Jessica Ryzman). Ms Dixon’s focus will be to ensure that the specific needs of SEN(D) students in the class are being met and that these students and their parents/carers have an advocate who will work alongside them to ensure the best educational experience for their sons and daughters. As a teacher of many years, she brings to the role a clear understanding of what has to be achieved and I have every confidence in her ability to make good things happen for students in her care. Finally, I have the privileged task of guiding the long term future of the UTC towards a Multi-Academic Trust (MAT). In aiming to join a Trust in September 2023, we will seek to ensure that Silverstone UTC has the best opportunities to share with other schools the best academic and well-being expertise, fiscal security, strength and depths in a wider curriculum that will benefit our students and staff and in so doing, further strengthen the already great position in which we find ourselves today. As that process continues, I will be updating all those involved but I start the journey excited by the great benefits that being part of a MAT will bring to the UTC, our staff and most importantly your sons and daughters. I end by thanking everyone involved in the UTC for the start made this term. I offer my assurances that I will work hard to guide the UTC in the best way possible and with such great students, supportive Parents/Carers and talented staff, I am confident that the future for Silverstone is a positive one for all involved. My best wishes, John Principal