11279 Courses

Ear Care, Microsuction, Ear Microsuction, Ear Syringing,

Phlebotomy/Venepuncture Live Practical and competency sign off The Practical session includes live Phlebotomy in our clinic in North London. You will be observing and be observed under supervision of a competent professional to take live blood samples.

1-2-1 bespoke training course

About this Virtual Instructor Led Training (VILT)  This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents. This course is delivered in partnership with ENGIE Laborelec. Training Objectives The VILT course will cover the following: Detailed aspects of chemistry in a water steam cycle, including types of chemicals used in boilers depending on the treatment and type of boiler Potential issues in a water-steam cycle such as corrosion and deposition Monitoring & analytical programmes and knowledge of specifications for the water steam cycle (normal values targets - alarm levels) Chemistry aspects during transition periods: start-up, shutdown and preservation Actions to be taken in the event of an alarm Examples of incidents or deviations compared to normal chemistry Target Audience The VILT course is intended for: Power plant chemists Plant operation or maintenance engineers Consultants and technical project managers Boiler engineers Course Level Basic or Foundation Training Methods The VILT course will be delivered online in 2 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises. Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total). Trainer Your expert course leader is a chemistry consultant in the energy sector. He works with operators of power plants and industrial facilities. He is active in water-steam cycle chemistry, where he provides support to increase chemistry maturity through audits, trainings or development of key performance indicators. His role also includes operational assistance in the field of chemical cleaning and troubleshooting. More recently, he expanded his field of competence towards electrical storage. In this regard, he specializes in electrochemistry and is in charge of different tests on batteries and their components within the ENGIE Batteries Lab. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Course Description Training will cover detailed anatomy and physiology of the lymphatic and associated vascular system, pathology of lymphoedema and chronic oedema and the different stages and types of lymphoedema. Please note: Your training will be delivered through a blended learning format. With our blended learning format, you will have the opportunity to complete the theoretical components of your training at your own pace. In addition to the online learning, we offer clinical skills training on scheduled workshop dates. This hands-on training will allow you to put your theoretical knowledge into practice and develop the necessary skills to excel in your field. Our experienced instructors will guide you through each step of the training, ensuring that you are fully prepared and confident in your abilities. Once you have completed your clinical skills training, you will receive your certification, validating your skills and knowledge. Please note price includes VAT Our Comprehensive Lymphoedema Training Course  Course Summary Join us on our blended learning training programme especially designed for certified healthcare professionals working within clinical settings.   By the end of the course, you will have a thorough understanding of the anatomy and physiology of the lymphatic system, enabling you to holistically assess and diagnose a patient with lymphoedema. You will be able to design and implement an appropriate research and evidence based individualised management strategy selecting from a range of therapies and new innovations. You will be competent in the field of Decongestive Lymphatic Therapy including Multi Component Bandaging (MCB) and the latest knowledge and research in Fluoroscopy Guided - Manual Lymphatic Drainage (FG-MLD®) Entry Requirements This training is suitable for: All certified healthcare professionals. Such as Medics, Registered General Nurses, Physiotherapists, Radiographers, Occupational therapists, Osteopaths and Chiropractors Learning Format Your course is made up of a blended learning format meaning your content and modules will be taught via live interactive webinars, through self-guided independent study and face to face clinical skills workshops. So, whether you're learning style is social, solitary, visual, kinesthetic, auditory or a combination we have a learning style to help you get the best out of the course. We hope that you make the most out of the tools that are available to you throughout the course but don't worry if you are not the most "tech-savvy", we have real people on hand to help you every step of the way. Assessment Criteria All students will undergo a series of course specific formative & summative assessments. Throughout the course you will be assessed through observation of practical tasks, written assessments, assignments, research and online tests. Course Contents You will gain knowledge, skills and techniques in: Compression Exercise Skincare & Wound Healing Garments Multi-Component Bandaging Assessment & Treatment of Oedema Anatomy & Pathways of the Upper & Lower Limb FG-MLD® Technique Tissue Dielectric Constant Head & Neck, Midline & Genital Oedema.   Training will also cover innovations and consideration for clinical practice. Course Inclusions As part of your training pack, LTA will provide all training support materials required to undertake the course.   Such as but not limited to: Corporate Sponsored Bandaging Pack LymphBalls™ Latest LTA Research & Development articles Lymphoedema supporting literature Access to in-house LTA training & demonstration videos Learning management platform (CANVAS) profile & course content Snacks & Refreshments throughout your practical skills workshops Dedicated support from the LTA training team Course Certification The benefits of an LTA certification means you can; Display FG-MLD® Certified and LTA Cert. logo on your marketing material Write LTA Cert. after your name Wear your qualification badge Practice MLD to further enhance outcomes Use an innovative technique and ensure effective treatment programmes Receive training and support from Jane Wigg & Team Access the latest developments in Lymphoedema care Have access to a private FG-MLD® Therapist FB Page Recertification To maintain your LTA Therapist Certification, a 2-day recertification is required after 12 months after your initial training, and you will be required to attend a 1-day recertification every 2 years thereafter to maintain your certification of practice.

NOCN NVQ Level 3 Diploma in Supervising Hire and Rental Operations

4 Days of training + Test (Reverse/On-road)

Acrylic paint pouring workshop, making silhouettes, suitable to beginner and intermediate students.

Regulation 10 of the Control of Asbestos Regulations 2012 sets down requirements for asbestos awareness training. Basically, any employer involved in work where there might be a risk of disturbing asbestos, such as general building, maintenance, demolition, or refurbishment, is required by law to ensure that all affected employees are educated and trained appropriately. More recently the importance of adherence to the awareness measures has been emphasised in the Health & Safety Executive’s ‘Duty to Manage Asbestos Enforcement Initiative’ and it is now clear that non-compliance will not be tolerated. In fact, several perpetrators have already been served with improvement notices, or in the worst-case scenario a probation notice, which results in an immediate and costly halt to work. Employee training is believed to be the best way to target the estimated 1.8 million workers who are potentially at risk of life-threatening illnesses following exposure to asbestos in their day-to-day work. These people include plasterers, roofers, plumbers, electricians, demolition, maintenance men and joiners but also the less obvious workers such as computer installers, ground workers, landscapers, and fire & burglar alarm installers. Aims To raise personnel awareness of asbestos and the risks associated with it. To comply with the legal requirement of The Control of Asbestos Regulations 2012. Course Content • Introduction to asbestos - nature and origin • Types of asbestos • Properties and benefits (use of asbestos) • Health hazards • Possible locations of asbestos in buildings • Current legislation and guidance • Legal limitations on work liable to disturb asbestos • Working safely/duty holders’ responsibilities • Safe working in areas where asbestos is present • Decontamination • Emergency procedures/accidental damage/general procedures. Prerequisites None – The course is intended either as an introduction or as an update. Assessment Delegates will be required to complete a short multiple-choice test at the end of the training. Certificate This course is covered by certification to provide to your Clients, CHAS (and other SSIP) as confirmation of training undertaken and is valid for 2 years. Instructions Cost includes: course notes, certification & refreshments. Directions Location Map

Why Learn Autodesk Maya Basics to Advanced Level Course? Course info. Autodesk Maya is one of the best tools for 3D animation and visual effects. Learn Maya with our training courses covering sectors like Architecture, Games & Films, Animation, and Media. London Design Training Courses empower you to master Maya, transforming your 3d skills.  Duration: 40 hrs Method: 1-on-1. Schedule: Tailor your own schedule by pre-booking a convenient hour of your choice, available from Mon to Sat 9 am and 7 pm. Experience advanced-level Maya training covering essential aspects such as modeling, UV mapping, texturing, lighting, camera movement, and rigging. The course is tailored to your specific requirements and work preferences. You can discuss your learning goals with our trainer, and we will suggest a syllabus that meets your needs. Flexible Training Options: Choose in-class training at one of our UK center or attend live online sessions. Certified Tutors and Authoritative: London Design Training Course has all Autodesk Authorized Trainers. Hands-on Learning Approach: The training is practical and hands-on, combining theory and step-by-step demonstrations. You'll have ample time to practice techniques on your computer with Maya, and you can keep all the files you create. Compatible with Windows and Mac: Maya training is available for both Windows and Mac users, with options to suit any recent version of Maya. Maya Basic to Advanced Course Duration: 40 hours Course Description: In this course, you will learn the fundamental and advanced skills to create complex 3D models and animations using Autodesk Maya software. You will gain knowledge of the Maya interface, tools, and workflow. You will learn the essentials of modeling, texturing, rigging, animating, and rendering 3D models. You will also learn how to create advanced special effects and understand advanced modeling techniques. I. Introduction to Maya (3 hours) Overview of Maya and its Uses Maya interface and basic tools Navigation and viewport controls Creating and saving projects II. Basic Polygon Modeling (6 hours) Polygon modeling basics Creating basic shapes and objects Editing and modifying objects Creating complex objects with extrusions and bevels Creating organic shapes with NURBS III. Intermediate Modeling (6 hours) Advanced polygon modeling techniques Creating complex models with Booleans and deformers Creating and modifying curves and surfaces Creating organic shapes with sculpting tools Creating architectural models IV. Texturing and Materials (6 hours) Introduction to texturing Creating and applying materials Texture mapping and UV unwrapping Creating realistic materials with shaders Painting textures with the 3D paint tool V. Lighting and Rendering (6 hours) Basic lighting techniques Advanced lighting techniques Creating realistic lighting environments Setting up a camera and creating a composition Rendering still images and animations Output options and file formats VI. Animation (9 hours) Introduction to animation Keyframe animation and animation curves Creating and editing animation clips Rigging and animating a simple character Creating and editing motion paths and animation layers Creating complex character rigs Creating lip sync and facial animation Creating realistic animation with dynamics and simulations Cloth Animation Ncloth VII. Rigging (4 hours) Introduction to rigging Creating joints and skeletons Binding skin to joints and creating weight maps Creating simple rigging systems and rigging a character Creating complex rigging systems VIII. Special Effects (4 hours) Particle systems and dynamics Creating and manipulating fluids and fire effects Creating and editing special effects like explosions and smoke Creating advanced simulations with nCloth and nParticles Paint effects Mash Networks and Mash Animation IX. Advanced Rendering Techniques (2 hours) Render layers and passes Global illumination and ambient occlusion Mental Ray rendering and settings X. Conclusion and Next Steps (1 hour) Review of course content Tips for further learning and resources Q&A; and feedback Note: The above course outline is just a suggestion, and the course content and duration can be adjusted according to the needs and level of the learners. Proficiency in Advanced Maya Techniques: Participants will gain advanced skills in various aspects of Maya, including modeling, UV mapping, texturing, lighting, camera movement, and rigging. Tailored Training: The course is customized to meet the specific requirements of participants, focusing on their preferred techniques and work type. Hands-On and Practical Experience: The training is practical and hands-on, allowing participants to practice techniques on their own computers with Maya. Versatility in Operating Systems: Participants will be equipped to use Maya on both Windows and Mac systems. Accredited Certification: Upon successful completion, participants will receive an e-certificate, accredited by Autodesk Certified instructor, confirming their achievement in the Maya training course. Post-Course Support: After the training, participants are entitled to 30 days of email support from their Maya trainer, ensuring assistance with any post-course questions or issues. Up-to-Date and Relevant Learning: The training can be based on any recent version of Maya, providing participants with up-to-date knowledge and skills.