2192 Courses

Manage the day to day operations involved in supply chain.

Material Re-Handler Training The aim of the NPORS Material Re-Handler Training is to provide training and assessment of candidates to ensure safe and efficient operation of a Material Re-Handler (360 °). We support users of both tracked or wheeled Re-Handlers, that are either above or below 10 tonnes. All candidates will be trained and assessed by our fully accredited NPORS Instructors It is important that all delegates have a good understanding of spoken and written English for Material re-handler training, however you can use an Interpreter NPORS is an approved CSCS Partner Card Scheme, providing evidence that individuals working on construction sites have the appropriate training and qualifications for the safe operation of the material re-handler. Furthermore, training criteria is based on the approved standards of the Construction Leadership Council. Experienced operator – NPORS Material Re-Handler Test Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Material Re-Handler Experienced Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Material Re-Handler Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS material re-handler Test is for operators who have received some form of training in the past or alternatively has been operating the material re-handler for several years. If you are unsure if you qualify to go down the test route please contact us to discuss this in more detail. Discounts are available for multiple bookings There are two parts to the material re-handler test, a theory section comprised of 25 questions and a practical session. Course Content To develop the skills and knowledge required when using a Material Re-handler, the following topics are covered: Responsibilities under the Health and Safety at Work Act 1974, PUWER 1998, LOLER 1998 and other relevant legislation. Have knowledge of the operators manual and able to locate information about the machines controls and operation Have a basic understanding of the industry, the dangers of working in the industry and their responsibility of a plant operator Pre-operational checks and daily maintenance of the machine Manoeuvring: pre-operational safety checks set up and machine positioning Be able to locate components and identify major components of the machine and explain their function Loading of a vehicle stockpile work mobility and stability factors Safety rules applicable to operating Safe use of attachments End of Shift Checks Variations Excavator below 10T. Excavator above and below 10T Wheeled Or Tracked. Material Re-handler Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of material re-handlers and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment with the material re-handler Our re-handler training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS re-handler Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. Who should take the Material Re-Handler Training? This course is designed for individuals who need to operate Material Re-Handlers (360°), both tracked and wheeled, and is suitable for both novice and experienced operators. 2. What does the Material Re-Handler Training cover? The training includes legislation, operator responsibilities, machine controls, pre-operational checks, maneuvering, loading, safety rules, and end-of-shift checks. 3. How long is the Material Re-Handler Training? The course duration varies: 1-10 days for novice operators and 1 day for experienced operators. 4. What certification do I receive upon completion? Participants receive an NPORS card, either the traditional card valid for 5 years or the NPORS card with CSCS logo, initially valid for 2 years. 5. Are there any prerequisites for the Material Re-Handler Training? Candidates must have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. More courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today. For those looking for a “NPORS Material Re-Handler Training near me,” our widespread operations make it convenient for you to access Vally Plant Trainings top-quality training no matter where you are in the UK

NPORS Appointed Person Course or Training NPORS Appointed Person Lifting Operations Training is aimed at anyone who is required to plan safe systems of work using lifting equipment and to gain the NPORS Appointed Person operator card. The aim of the course is to provide candidates with underpinning knowledge to prepare them for the role and responsibility. It is recommended that prior to attending this course individuals should have some experience of working with lifting equipment, especially mobile cranes. It is important that all delegates have a good understanding of spoken and written English for the appointed person course. NPORS is an approved CSCS Partner Card Scheme, firstly providing evidence that individuals working on construction sites have the appropriate training and qualifications but more importantly for the safe operation of the appointed person. Furthermore, training criteria is based on the approved standards of the Construction leadership Council. Experienced Appointed Person Test For experienced Appointed Persons you must complete a 1 day refresher training course. For refresher training you must have held a certificate or card in the past Appointed Person Course Duration: Experienced Worker Test: 1 day refresher training, maximum of 6 candidates Novice: 5 day’s training, maximum of 6 candidates Location*: Tewkesbury or at our clients’ site nationwide Mileage and accommodation charges may apply Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. CSCS Health & Safety Test If you require the NPORS Appointed Person Red operator card with the CSCS logo on then you must have completed the operatives health and safety test within the last two years. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. The Appointed Person Course Includes: This Appointed Person Course covers essential legislation, crane appreciation, lifting accessories, and planning lifting operations. It culminates in writing a risk assessment and method statement. Legislation LOLER, PUWER, HASAWA. Codes of practice BS7121. Roles and responsibilities of personnel involved with lifting operations. Crane appreciation, crane types, capabilities and limitations. Duty charts. Crane terminology. Documentation and certification for lifting equipment and lifting accessories. Crane stability/ground conditions. Safe Load Indicators (SLI) and Safe Working Loads (SWL). Lifting accessories. Types of accessories and use. Slinging techniques. Down rating of accessories. Sling angles. Communications. Planning a lifting operation. Writing a risk assessment (end test). Writing a method statement (end test). Appointed Person Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of lifting equipment and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the AP Course. Our Appointed Person training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Appointed Person Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. What is the NPORS Appointed Person Lifting Operations Training? This training is designed for individuals required to plan safe systems of work using lifting equipment. It provides the knowledge necessary to prepare for the role and responsibilities of an Appointed Person. 2. Who should take this course? Anyone involved in planning and managing lifting operations, especially those with prior experience with lifting equipment, should take this course. 3. What does the course cover? The course covers legislation, codes of practice, roles and responsibilities, types of cranes, duty charts, lifting accessories, risk assessment, and method statement preparation. 4. How long is the course? The course duration is 5 days for novices and 1 day for experienced individuals seeking a refresher. 5. What certification do I receive upon completion? Participants receive an NPORS Appointed Person operator card, valid for 5 years or an NPORS card with CSCS logo. 6. Are there any prerequisites? Candidates should have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

Empower yourself with the essential knowledge to recognise, report, and address modern slavery through our comprehensive Online Modern Slavery Training Course. Gain insights into the Modern Slavery Act and learn to identify signs of slavery, human trafficking, and forced labour. This CPD Accredited course equips participants with the skills and confidence to combat modern-day slavery effectively.