29809 PLA courses

This course is aimed at those who would like to work as a learning support assistant in a school or further education setting. Level 3 Certificate in Supporting Teaching and Learning will give you an understanding of the skills and knowledge needed to support learners in the classroom.

Teaching you how to treat your child should the worst occur Children can be present, though parents will remain responsible for them throughout 2.5 - 3 hr sessions Course Contents: What to do if your child goes unconscious How to check if they are breathing normally or not If they are, how to put them in the recovery position If they are not, how to start CPR and use an AED (defibrillator) What to do if your child were to choke What to do if they were to get burnt How to treat minor injuries (dependent on available time) Past Sessions: Sessions in the past have been paid for by a local charity, enabling parents to access the training for free We're happy to put on sessions for your group, playgroup, charity, or simply for you and your children We're always happy to have little ones come along They can either play around, or join us - they usually prefer to join us and play with the manikins, even trying out CPR! You will, of course, remain fully responsible for them while they are there Accreditation: These sessions are tailored to the needs of parents and are therefore not accredited. We can, however, give a CPD Certificate if that is helpful to you. If you'd like an Ofqual regulated course, why not do our Basic Life Support for Adults and Children course, Emergency Paediatric First Aid or Paediatric First Aid?

Enhance your asset management skills with EnergyEdge's classroom training on the principles of asset management. Gain valuable insights and advance your career.

About this Training Course  This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications. This course will emphasize on field handling equipment and separation systems, dehydration, fluid measurement, sampling and analysis as well as introduction into reciprocating and centrifugal compressors. It will comprise interactive presentations including exercises/quizzes. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives At the end of the course, the participants will be able to describe and explain the following: Gas processing principles of dehydration (water removal) by absorption, adsorption, refrigeration and low temperature separation (JT effect) and basic associated equipment Gas processing in-depth by absorption using glycol and glycol proper (Pre- Cooling requirements, Dew Point control and related processes). Glycol regeneration including principles of stripping, DRIZO and Coldfinger. Process equipment involved for water removal by absorption. (Knock out drums; Contactor - absorber and internals, heat exchangers, re-boilers, pumps, filters and glycol storage). Principles of gas metering and types of meter (Measurement Units (MJ, BTU, nM3, scf and conversions). Typical gas contracts & sales specifications. Gas pipeline operations. Target Audience Production and processing personnel involved with natural gas and associated liquids to acquaint or reacquaint themselves with gas conditioning and processing unit operations. This course is for production operations engineers, operations field supervisors, facility engineers, process engineers, design engineers, operations personnel and others who select, design, install, evaluate or operate gas processing plants and related facilities. Course Level Intermediate Trainer Your expert course leader has more than 25 years of accumulated experience in the Oil & Gas Industry, particularly in LNG / Offshore LNG Industry as Project Manager (8 years) and Process Technology Design (12 years). From 2010 to 2012, he worked for TOTAL E&P as Manager of R&D activities related to LNG, FLNG, Gas Treatment and Safety Engineering. From 1992 to 2010, he worked for Technip, spending 12 years (1992 to 2004) in the Process and Technology Division, where he was the Principal Engineer on gas treatment and LNG projects such as Yemen LNG and Nigeria LNG. From 2004 to 2010, he was actively involved in the development of Technip Offshore LNG technologies as Project Manager - several patents filed, author or co-author of different publications on LNG transfer technologies. He has also been a member of: the Foreign Advisory Committee on the 2nd Trondheim Technology Gas Conference, Norway, 2-3 November 2011 the Steering Committee on the SPE Forum 'Economic and Sustainability Challenges in the Future Development of Sour Gas', Bali, Indonesia, 8-13 May 2011 The Technip 'Experts Network' as 'Main Expert - LNG' for several years He holds a 'summa cum laude' master's degree in Chemical Engineering from Rome University 'La apienza' (1992) and has been a member of the Italian Register of Engineers. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

LEARN HOW TO MAKE SIMPLE LEATHER ITEMS: WHAT IS THIS COURSE ABOUT? This is a theoretical and practical taster group tuition during which you will receive an overview on basic leather craft skills and techniques and realise one or more simple leather items to take home with you.The class will take place in our London workshop where you will be able to see how a leather craft studio is equipped and receive practical demonstrations of common working methods used in the field.YOU WILL BE ABLE TO MAKE AS MANY CUSTOMISED LEATHER ITEMS AS YOU CAN, choosing between a selection of different types of goods such as key rings, glasses cases, card holders, bracelets and more.You will be shown different types of leather and get to understand their main features. You will receive an introduction on how to prepare, mark, cut, edge finish leather and use simple fastening hardware.You will receive relevant, useful and informative handouts as well as lists of leather and tool suppliers.   At the end of the tuition you will have:– Gained an understanding of leather types– Been instructed on the use of common fastenings and closure techniques– Received an overview on the correct use of tools for preparing, marking, cutting and punching leather– Understood and practiced leather craft techniques such as beveling and burnishing techniques– Realised you own small, simple leather item(s) to take home with you WHAT ARE THE ENTRY REQUIREMENTS?This course is suitable for total beginners and beginners with some experience in leather crafts.You should be able to use measurements and understand verbal and written English instructions.   ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest. INCLUDED IN THE COURSE:You will be provided with useful handouts which contain:– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristicsHOW LONG IS THIS TUITION?:This tuition will require up to 3 hours to complete.We aim to provide customised and high quality tuition services and by only allowing up to 6 students at a time, we are able to focus on each person needs and interests.As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others.Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.

Business Relationship Management Professional (BRMP)® Business Relationship Management (BRM) embodies a set of competencies (knowledge, skills, and behaviors) to foster an effective business value-producing relationship between a service provider and its business partners. The BRM Discipline rests on solid research-based foundations verified and enhanced over a decade of successful implementations in leading organizations across the world. Proven to be equally effective for shared services including Human Resources, Finance, Legal, external service providers and others, BRM practices have enjoyed widespread adaptation in IT. The Business Relationship Management Professional (BRMP) training and certification program provides a foundational understanding of business relationship management (BRM) for individuals at every experience level, with the training and certification designed to provide a solid baseline level of knowledge. In other words, this course provides the 'why' and the 'what' - 'why' business relationship management is important to your organization and 'what' a BRM capability does to add value to your organization. This interactive course, with discussions, partnering activities, and periodic knowledge checks, will provide you with the opportunity to apply learning to your unique organizational situations, creating solutions that you can use immediately upon returning to your workplace. This practical knowledge will allow you to demonstrate immediate value in your role, as well as prepare you for the BRMP Certification exam. What You Will Learn This course provides a foundational understanding of Business Relationship Management. Upon completion of the BRMP® course, participant will be able to demonstrate their understanding: Explain what business relationship management is and the value it provides to an organization Articulate the need for an organization to move beyond traditional goals of profit and products to encompass those that are appropriate for a relationship-centered organization Describe the importance of integrating business relationship management into every element of their organization Define the importance of educating their organization that a mature BRM capability will evolve culture, build partnerships, drive value, and satisfy purpose Apply business relationship management to their organization's triple bottom line of people, purpose, and planet Explain the basic knowledge, skills, and mindsets of the business relationship management role Clarify the core business relationship management approaches, tools, and templates used to achieve results Illustrate the value and impact the BRM capability has on an organization by completing a draft of the BRM Capability Workbook BRM Introduction - The Bigger Picture Why BRM = why now? Relationship-centered organization Theory of 'relationshipism' Triple bottom line BRM defined Activity domains BRM challenges BRM Capability BRM capability framework Organizational purpose and strategy Now-to-new Evolve culture Build partnerships Drive value Satisfy purpose Limitless growth and improvement BRM Capability - Evolve culture Evolve culture framework Purposeful narrative Desired behaviors Influential relationships Personal growth BRM Capability - Build partnerships Build partnerships framework BRM role competency model Relationship maturity and quality Partnering mindsets Relationship discovery Relationship nurturing BRM Capability - Drive value What is value? Types of value Sources of value Drive value framework BRM role competency model Value discovery Value realization Value results BRM Capability - Satisfy purpose Satisfy purpose framework BRM role competency model Through the BRM capability Through the triple bottom line Social value BRM Capability - Wrap-up Evolve culture capability framework Build partnerships capability framework Drive value capability framework Satisfy purpose capability framework BRM Role Our purpose and what we believe Role clarity Single point of focus BRM Code of Ethics BRM Role Competency Model BRM mindset Scope of BRM role BRM role with organizational factors BRM Team Our purpose and what we believe BRM team definition BRM team purpose, mission, and vision Assessing the value of a BRM team Organizing a BRM team Leading a BRM team Transition management Coaching BRMs Closing - BRM Key Learnings Key learnings from each module Closing - BRMP Course Wrap-Up What to do in the next 30/60/90/365 days Digital badge After passing the exam Recap learning objectives Review learning objectives Review expectations Course feedback

About this Training Growing global competitiveness in the refining products' market requires an in-depth knowledge of fuel technology processes, global quality standards and quality monitoring procedures. As the global market turns to cleaner fuels with more stringent specifications, the market in which refiners operate in, is getting more sophisticated and challenging. Training Objectives Upon completion of this course, participants will be able to: Get a clear overview of processing background and how white products are produced and blended Understand the blending impact on product quality and how to deal with quality giveaways, stability of blends and specification margins Get a clear overview of fuel blending operations, blending principles, specifics and operations Understand the role of additives and how additives are selected and used to meet the specification for different products and different markets Realize the importance of specifications, their limitations and how to ensure that the product is fit for purpose Be able to correctly interpret the laboratory results Target Audience The course is intended for individuals who are interested in the field of refining blending. The following personnel will benefit from the knowledge shared in this course: Plant operative planning and scheduling specialists Oil products trading and blending personnel Laboratory supervisors and technical personnel Sales, marketing and product trading personnel Refinery market and research analysts Process and chemical Engineers Personnel from the oil, fuel, biofuel, additive and auto industries Regulatory and policy-makers personnel Course Level Basic or Foundation Trainer Your expert course leader is an experienced manager with more than 25 years of operational experience in the downstream Oil & Gas industry. She is a recognised expert in conventional, biofuels and alternative fuels with extensive experience in the crude selection process and formulation of finished products including product portfolio strategy, product quality road mapping and benchmarking. She is a long-time laboratory manager with comprehensive experience in laboratory processes, including financing, benchmarking, efficiency improvement and total quality management processes. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Unlock Your Potential as a Team Leader or Supervisor with Our Level 3 Course This qualification is for Supervisors, Team leaders, Project officers, Shift supervisor, Foreperson, and Shift manager. A Team leader or supervisor is a first line management role, with operational and project responsibilities or responsibility for managing a team to deliver a clearly defined outcome. They provide direction, instructions, and guidance to ensure the achievement of set goals. Working in the private, public or third sector and in all sizes of organisation, specific responsibilities will vary, but the knowledge, skills and behaviours needed will be the same whatever the role. Learn about the Cavity Training Team Leader or Supervisor Course This qualification allows candidates to learn, develop and practice the skills required for employment and a career in Management. The content covers all essential areas of team leader and supervisor skills. Key responsibilities are likely to include supporting, managing, and developing team members, managing projects, planning, and monitoring workloads and resources, delivering operational plans, resolving problems, and building relationships internally and externally. Fees This course can be completed as an government funded apprenticeship, through Cavity Training, or as a privately funded course for £2500. You can either pay as a lump sum or alternatively, you can split into 12 instalments. Entry requirements Whilst any entry requirements will be a matter for individual employers, a minimum of English & Maths GCSE are required. Structure Our candidates are trained to the highest standards and are fully supported to develop all of the knowledge, skills and behaviours required to be an outstanding Team Leader. The course duration is typically 12 – 18 months. Knowledge Our course is delivered via live training webinars with specialist tutors. Skills and Behaviours You will be appointed a designated Skills Coach, who will coach you through your qualification and complete regular assessments with you to support you to complete your qualification. You will have weekly contact from our training team. How we compare with our competitors? Don't just take our word for it, here is what our staff think Bridget I did my course years ago. It was classroom based one night per week. I think I would prefer to be more ‘hands on’ like it is now. Cavity really are a great company to work for. I truly believe that there expertise will ensure the next generation are amazing! Gina I did mine over an apprenticeship but the company my employer used wasn’t great and I didn’t get much support. Although I passed I can only imagine the length that Cavity have gone to to ensure that the students feel supported. As an employee, its super! Enquire Today

EnergyEdge course offers in-depth training on hydraulic fracturing. Learn about design, execution, and post-frac analysis. Enroll today!

This 6-month intensive course combines the best of on-demand, on-line training with the opportunity for in-person practical hands-on learning. During the course you will develop your understanding of sitting and the often forgotten lying posture with a key focus on nurturing positive relationships with families to get the best results. Course covers assessment techniques, outcome measures and the use of the Goldsmith Indices of Body symmetry. The in-person aspect of the course culminates in producing an action plan for next steps in service development with expert mentorship and support until March 2025.