• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

132 Supervisor courses in Cottingham

NPORS Slinger Signaller Training

5.0(3)

By Vally Plant Training

Slinger Signaller Training The aim of the NPORS Slinger Signaller Training or Slinger Signaller Course is to provide both theoretical and practical training in the safe and efficient operation of slinging and moving loads using hand signals or radios Guided by the Lift Supervisor. On successful completion of the slinger and signaller course you will be issued with the NPORS Slinger Signaller trained identity card with or without the CSCS Logo or testing can be carried out on your site nationwide or at our training centre in Gloucestershire NPORS Slinger Signaller Test Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Slinger And Signaller Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Slinger and Signaller Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS Slinger Signaller Experienced Worker Test .This test is for operators who have received some form of training in the past or alternatively has been operating as a Slinger Signaller for a period of time. If you are unsure if you qualify to go down the test route please contact us to discuss this in more detail. This test is held at our test centre in Gloucestershire or at your site nationwide. Discounts are available for multiple bookings Turn your Slinger Signaller red card to blue with our hassle free NVQ, for more information CLICK HERE Slinger Signaller Course Duration Novice: 2 days, maximum of 3 candidates Experienced Worker Test: 1 day test only, maximum of 6 candidates. Location: Tewkesbury Training Centre At Our Customers Site*: Our instructors travel throughout the UK to deliver the slinger signaller training *Mileage and accommodation charges may apply Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. CSCS Health & Safety Test If you require the NPORS Slingers Red operator card with the CSCS logo on then you must have completed the operatives health and safety test within the last two years. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. Slinger Signaller Course Contents: A Slinger Signaller course typically covers a range of topics related to the safe operation of lifting equipment and the signalling procedures involved in crane and lifting operations. While specific course contents may vary depending on the training provider and the regulations of the region, here’s a general outline of what will be included: 1. Introduction to Lifting Operations: Overview of lifting equipment and machinery. Importance of safe lifting operations. Legal and regulatory requirements for lifting operations, LOLLER, PUWER and BS 7121. 2. Roles and Responsibilities of Slinger and Signaller: Duties of the slinger signaller. Understanding the roles of other personnel involved in lifting operations (crane operator, banksman, etc.). Importance of effective communication and coordination. 3. Health and Safety: Risk assessment and hazard identification. Personal protective equipment (PPE) requirements. Safe working practices around lifting equipment and machinery. 4. Lifting Equipment and Accessories: Types of lifting equipment (cranes, hoists, slings, etc.). Inspection and maintenance requirements for lifting gear. Proper selection and use of lifting accessories. 5. Signals and Communication: Standard hand signals for crane operations. Radio communication procedures between Crane Driver & The Slinger and Signaller. Clear and effective communication techniques. 6. Load Identification and Weight Estimation: Methods for identifying loads and determining their weights. Estimating centre of gravity and load stability. 7. Slinging Techniques: Types of slings and their applications. Correct methods for attaching and securing loads. Precautions for different types of loads (e.g., fragile, hazardous). 8. Lifting Operations Planning: Pre-lift checks and planning considerations. Site-specific factors affecting lifting operations (e.g., terrain, weather). Emergency procedures and contingency planning. 9. Practical Exercises and Demonstrations: Hands-on training with lifting equipment and machinery. Practice sessions for signalling and communication. Simulation of real-world lifting scenarios. 10. Assessment and Certification: Written tests to assess theoretical knowledge. Practical assessments of signalling and slinging skills. Certification upon successful completion of the course. It’s essential for the Slinger Signaller Course to provide a balance of theoretical knowledge and practical skills to ensure that participants can effectively carry out their duties as slinger signallers in various lifting operations. Additionally, the course should emphasise the importance of safety and adherence to regulations throughout all aspects of lifting operations. Slinger Signaller Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of the Slinger Signaller and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment as a slinger signaller Our slinger and signaller training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS slinger Tester to your site nationwide, to reduce the amount of time away from work Other courses: Master the operation of essential machinery with our Lift Supervision Training, Telehandler Training, Cat & Genny Training, Ride-On Road Roller, Scissor Lift, Abrasive Wheel Training, Lorry Loader Training and Telehandler Training. Elevate your skills for safer and more efficient operations in construction and maintenance projects. Enrol today to advance your career prospects in these industries. Location Advantage: NPORS Slinger Signaller Training Near Me For those looking for a “NPORS Slinger Signaller Training near me,” our widespread operations make it convenient for you to access Vally Plant Trainings top-quality training no matter where you are in the UK

NPORS Slinger Signaller Training
Delivered In-Person in Tewkesbury or UK WideFlexible Dates
Price on Enquiry

CITB SSSTS Refresher (1 Day) (On-Site)

4.9(182)

By You Can Do It .Training

Site supervisor safety training scheme refresher (SSSTS-R)

CITB SSSTS Refresher (1 Day) (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
Price on Enquiry

IOSH Managing Safely (On Site - 3 Days)

4.9(182)

By You Can Do It .Training

This highly-regarded course gives team leaders, supervisors and managers, the training they need...

IOSH Managing Safely (On Site - 3 Days)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
Price on Enquiry

NR Medical Training offers the Qualsafe First Response Emergency Care (FREC 3) Level 3 RQF, a nationally accredited qualification ideal for anyone aspiring to be a first responder. This course is tailored for a wide range of professionals, including police officers, firefighters, and event medical staff, as well as roles like Emergency/Community First Responders, Door Supervisors, and Security Guards.

FREC 3
Delivered In-Person in Bury St Edmunds + 1 more or UK WideFlexible Dates
Price on Enquiry

Supervising First Aid for Mental Health 2-day Course

By Prima Cura Training

This course includes all the content of the 1 day First Aid for Mental Health, and in addition provides insight into a wider range of mental health conditions. It explores the range of therapies and professional support an individual may be offered. The course is suitable for all within a workplace although is aimed at those who hold a supervisory/managerial level position and/or are responsible for implementing a positive mental health culture for First Aid for Mental Health within an organisation.

Supervising First Aid for Mental Health 2-day Course
Delivered In-PersonFlexible Dates
Price on Enquiry

Abrasive Wheels Training

5.0(3)

By Vally Plant Training

Abrasive Wheels Training Nearly half of the workplace accidents involving abrasive wheels are due to an unsafe work system or operator error. This indicates that many of these incidents can be avoided if the risks of working with abrasive wheels are clearly communicated, and the correct safety measures are adopted, Abrasive Wheels Training will eliminate most accidents with Abrasive Wheels. With the appropriate Abrasive wheels training in place, you could significantly reduce the risk of an injury such as friction burns, crushed fingers and loss of eyesight which are the most common amongst abrasive wheel operators with the misuse of machines. This Abrasive Wheels Training Course is designed to assist in reducing the risk of injury for anyone who uses abrasive wheels at work. It guides you through the different types of abrasive wheels, how to identify and store them, how they should be used safely, and how they should be inspected prior to use. Our Abrasive Wheels Training will give all candidates hands-on practical training. Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Your skills, our commitment—always at the best price. Abrasive Wheels Course Duration 3-4 Hours Petrol Cut Off Saw 1 Day for all candidates Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. Introduction to Abrasive Wheels Definition of Abrasive Wheels Abrasive wheels are tools used for cutting, grinding, and polishing various materials. They are made from abrasive particles, like grit, bonded together to form a solid wheel. When these wheels spin at high speeds, they can shape or finish different surfaces effectively. Types of Abrasive Wheels Commonly Used in Industry Bonded Abrasive Wheels: These are made by combining abrasive particles with a bonding material to form a solid wheel. Bonded abrasive wheels are typically used for tasks like grinding, cutting, and finishing metal or stone. Coated Abrasive Wheels: These have an abrasive layer attached to a backing material, like paper or cloth. Coated abrasive wheels are commonly used for sanding and smoothing surfaces, often in woodworking or metalworking. Abrasive wheel training is essential for learning how to use these tools safely and effectively. Understanding the different types of abrasive wheels and their applications can help you choose the right wheel for your job, ensuring efficiency and safety. Importance of Proper Training Overview of the Risks Associated with Improper Use Using abrasive wheels without proper training can be very dangerous. The importance of proper training cannot be overstated when it comes to the safe and effective use of abrasive wheels. Improper use of abrasive wheels can lead to serious accidents, such as wheel breakage, which can cause flying debris and severe injuries. Other risks include cuts, burns, and eye injuries from sparks or fragments. Not knowing how to handle the equipment properly can also result in damaged materials and inefficient work, leading to wasted time and resources. Benefits of Trained Versus Untrained Usage Undergoing abrasive wheel training is crucial for several reasons: Safety: Trained individuals know how to handle abrasive wheels safely, reducing the risk of accidents and injuries. They learn to inspect the wheels for damage, choose the right type of wheel for the job, and use protective gear correctly. Efficiency: Training ensures that users understand how to use abrasive wheels effectively, leading to faster and more accurate work. Trained users can achieve better results with less effort and time. Cost-Effectiveness: Proper training helps prevent damage to the wheels and the materials being worked on, saving money on replacements and repairs. It also minimizes downtime due to accidents or improper usage. Compliance: Many industries require certification for using abrasive wheels. Completing abrasive wheel training ensures compliance with safety regulations and industry standards, which is essential for legal and insurance purposes. In summary, abrasive wheel training equips users with the knowledge and skills needed to use abrasive wheels safely and efficiently, making the workplace safer and more productive. Getting Started with Abrasive Wheels Essential Equipment and Setup Before using abrasive wheels, it’s important to have the right equipment and ensure everything is set up properly. Here’s what you need: Protective Gear: Always wear safety goggles, gloves, ear protection, and a dust mask to protect yourself from flying debris, noise, and dust. Abrasive Wheels: Have a selection of abrasive wheels suitable for the tasks you plan to perform. This includes grinding wheels, cutting wheels, and sanding discs. Mounting Equipment: Ensure you have the correct flanges, spacers, and mounting hardware to secure the wheel to the machine properly. Tools and Machines: Use the appropriate tools and machines for your abrasive wheels, such as grinders, sanders, or cut-off saws. Make sure these machines are in good working condition. Work Area: Set up your work area with adequate lighting, ventilation, and space to move around safely. Ensure there are no flammable materials nearby. Completing an abrasive wheels training course will guide you on how to properly set up and use this equipment. Selecting the Right Wheel for the Job Choosing the right abrasive wheel is crucial for getting the job done efficiently and safely. Here’s how to select the right wheel: Material to Be Worked On: Different materials require different types of wheels. For example, use a grinding wheel for metal and a sanding disc for wood. Wheel Specification: Check the specifications of the wheel, including its grit size, bonding material, and hardness. Finer grits are better for finishing, while coarser grits are used for rough grinding. Machine Compatibility: Ensure the wheel is compatible with your machine. Check the wheel’s size, speed rating, and mounting requirements. Type of Task: Match the wheel to the task. Use cutting wheels for cutting, grinding wheels for grinding, and polishing wheels for finishing tasks. Enrolling in a grinding wheel training course can provide detailed guidance on selecting and using the right wheels for different jobs. Proper selection and setup not only improve efficiency but also enhance safety and prolong the life of the abrasive wheels. Safe Operation Techniques Step-by-Step Guide on How to Operate Abrasive Wheels Safely Inspect the Wheel: Before using any abrasive wheel, inspect it for cracks, chips, or other damage. Do not use a damaged wheel. Mount the Wheel Properly: Ensure the wheel is properly mounted on the machine. Follow the manufacturer’s instructions for correct mounting and balancing. Check Machine Guards: Make sure all safety guards are in place and functioning correctly. Guards help protect you from flying debris and accidental contact with the wheel. Wear Protective Gear: Always wear safety goggles, gloves, ear protection, and a dust mask to protect against sparks, noise, and dust. Start the Machine Safely: Stand to the side of the machine when starting it, not directly in front of the wheel. Allow the wheel to reach full speed before using it. Use Proper Technique: Apply light, even pressure to the workpiece. Avoid forcing the wheel or using excessive pressure, as this can cause the wheel to break. Maintain Control: Keep a firm grip on the tool or workpiece to prevent it from slipping or catching. Avoid Overheating: Use intermittent cuts and allow the wheel to cool down to avoid overheating, which can weaken the wheel and cause it to break. Regular Breaks: Take regular breaks to avoid fatigue, which can lead to mistakes and accidents. Completing an abrasive wheel training course can provide practical demonstrations of these safety techniques. Comparison with Other Cutting Methods Feature Abrasive Wheels Saws (Circular/Band) Laser Cutters Versatility High: Can cut metals, stone, ceramics. Moderate: Best for wood and certain metals. High: Can cut metals, plastics, composites. Precision High: Provides precise cuts and finishes. Moderate: Effective for straight cuts, less precise for intricate designs. Very High: Capable of intricate designs and clean cuts. Cost Low: Generally cheaper initial and maintenance costs. Moderate: Higher initial cost than abrasive wheels but longer lifespan. High: Expensive initial investment and maintenance costs. Portability High: Many tools are portable for on-site cutting and grinding. Low: Often require stationary setups. Low: Typically not portable and integrated into fixed setups. Safety Risks High: Requires proper training to prevent accidents (e.g., HSE, OSHA). Moderate: High-speed blades can be dangerous, need safety measures. Moderate: Requires specialized training to handle safety risks (e.g., reflective materials). Dust/Debris High: Generates significant dust and debris. Low: Produces less dust and debris. Very Low: Minimal dust and debris, cleaner cutting process. Wear and Tear High: Abrasive wheels wear down with use and need regular replacement. Low: Blades have a longer lifespan, less frequent replacement needed. Low: Lasers do not wear down, but components may need maintenance. Training Availability High: Numerous training courses available (e.g., HSE, OSHA). Moderate: Training available but not as comprehensive as abrasive wheel training. High: Specialized training required for safe operation and maintenance. Compliance High: Training helps meet regulatory requirements (e.g., PUWER 1998). Moderate: Safety training helps meet general safety regulations. High: Requires adherence to safety standards and protocols. Operational Speed Moderate: Suitable for detailed work, not as fast as saws for straight cuts. High: Faster cutting speeds for straight cuts. Moderate: Speed depends on material and thickness, generally slower than saws for thicker materials. Common Mistakes and How to Avoid Them Using a Damaged Wheel: Mistake: Using an abrasive wheel with cracks or chips. Solution: Always inspect the wheel before use and replace damaged wheels immediately. Improper Mounting: Mistake: Incorrectly mounting the wheel, leading to imbalance and breakage. Solution: Follow the manufacturer’s instructions and ensure the wheel is securely mounted. Skipping Protective Gear: Mistake: Not wearing safety gear, increasing the risk of injury. Solution: Always wear the recommended protective equipment, including goggles, gloves, and ear protection. Excessive Pressure: Mistake: Applying too much pressure, which can cause the wheel to break. Solution: Use light, even pressure and let the wheel do the work. Incorrect Wheel for the Job: Mistake: Using the wrong type of wheel for the material or task. Solution: Select the appropriate wheel based on the material and the task. Refer to the specifications and guidelines provided during abrasive wheels training. By understanding and avoiding these common mistakes, you can ensure safer and more efficient use of abrasive wheels. Proper training, like an abrasive wheel course, is essential to master these techniques and avoid potential hazards. Maintenance and Care Tips for Maintaining Abrasive Wheels Regular Cleaning: Clean the abrasive wheels regularly to remove any debris or buildup. Use a brush or compressed air to clean the wheel, ensuring it remains effective and prevents clogging. Proper Storage: Store abrasive wheels in a dry, cool place to prevent moisture damage. Keep them on a flat surface or in a vertical position to avoid warping or deformation. Wheel Dressing: Dress the wheel regularly using a wheel dresser to maintain its shape and expose fresh abrasive particles. This helps keep the wheel sharp and efficient. Avoid Overloading: Do not overload the wheel by forcing it to cut or grind faster than its capacity. Overloading can cause excessive wear and reduce the wheel’s lifespan. Use Correct Speed: Always operate the wheel at the recommended speed. Check the maximum speed rating of the wheel and ensure your machine does not exceed this limit. Balanced Use: Use the entire surface of the wheel evenly to prevent uneven wear. Avoid focusing on one spot for too long, which can create grooves and weaken the wheel. Lubrication: If applicable, use the appropriate lubricant to reduce friction and heat buildup. This can extend the life of the wheel and improve performance. How to Check for Wear and Damage Visual Inspection: Before each use, visually inspect the wheel for cracks, chips, or other damage. A damaged wheel can be dangerous and should be replaced immediately. Sound Test: Perform a sound test by gently tapping the wheel with a non-metallic object (like a wooden handle). A clear ringing sound indicates the wheel is intact, while a dull sound suggests it may be cracked and unsafe to use. Check for Unusual Vibrations: When the wheel is running, check for unusual vibrations or wobbling. This can indicate imbalance or damage. Stop using the wheel if you notice these signs and inspect it further. Measure Wheel Wear: Measure the diameter of the wheel regularly to monitor wear. Replace the wheel when it reaches the minimum usable diameter specified by the manufacturer. Surface Condition: Examine the surface of the wheel for glazing or loading. A glazed wheel appears shiny and smooth, indicating it is worn out and needs dressing or replacement. A loaded wheel is clogged with material and may require cleaning or dressing. Mounting Hardware: Check the flanges, spacers, and other mounting hardware for wear or damage. Ensure they are secure and in good condition to maintain proper wheel alignment. Regular maintenance and careful inspection of abrasive wheels can significantly extend their lifespan and ensure safe, efficient operation. Abrasive wheels training provides detailed guidelines on maintaining and checking wheels for wear and damage, helping users develop good maintenance habits. Health and Safety Guidelines Detailed Safety Precautions and Protective Gear Wear Appropriate Protective Gear: Safety Goggles or Face Shield: Protect your eyes and face from flying debris and sparks. Gloves: Wear sturdy gloves to protect your hands from sharp edges and hot materials. Ear Protection: Use earplugs or earmuffs to protect your hearing from the noise produced by grinding operations. Dust Mask or Respirator: Prevent inhalation of dust and particles, especially when working with materials that produce harmful dust. Apron or Protective Clothing: Wear a durable apron or long-sleeved clothing to shield your body from sparks and debris. Machine Safety Checks: Guarding: Ensure all machine guards are in place and secure before operation. Speed Check: Confirm that the machine’s speed does not exceed the wheel’s maximum rated speed. Work Area: Keep the work area clean and free of clutter to prevent tripping hazards. Safe Operation Practices: Proper Setup: Mount the abrasive wheel correctly, following the manufacturer’s instructions. Ensure it is balanced and secure. Correct Usage: Use the abrasive wheel only for its intended purpose. Avoid side grinding unless the wheel is specifically designed for it. Pressure Application: Apply light, even pressure to avoid overloading the wheel and causing it to break. Regular Inspections: Pre-Use Inspection: Check the wheel for any cracks, chips, or signs of wear before each use. During Use: Monitor the wheel for unusual vibrations or noises, and stop the machine immediately if any issues arise. What to Do in Case of an Accident Immediate Response: Stop the Machine: Turn off the machine immediately to prevent further injury. First Aid: Administer first aid for minor injuries. This may include cleaning cuts, applying bandages, and using cold compresses for burns or abrasions. Seek Medical Help: For serious injuries, seek professional medical assistance immediately. Call emergency services if necessary. Report the Incident: Inform Supervisors: Report the accident to your supervisor or safety officer. Provide details about how the incident occurred and the extent of the injuries. Document the Incident: Fill out an accident report form, including information about the equipment used, the nature of the injury, and any contributing factors. Review and Improve Safety Practices: Incident Analysis: Analyze the accident to determine its cause. Review whether safety protocols were followed and identify any gaps in training or equipment maintenance. Safety Training: Consider additional abrasive wheels training or a refresher course to reinforce safe practices and prevent future accidents. Online courses can be a convenient way to update your knowledge. Preventive Measures: Review Procedures: Ensure that all safety procedures are up-to-date and that all employees are familiar with them. Safety Drills: Conduct regular safety drills to prepare for potential accidents and improve response times. Legal Requirements and Certifications Overview of Relevant Laws and Regulations Using abrasive wheels involves adhering to specific safety laws and regulations to ensure the safety and health of workers. Here’s an overview of the key legal requirements: Occupational Safety and Health Administration (OSHA): In the United States, OSHA sets standards for the safe use of abrasive wheels. Employers must comply with OSHA regulations, including proper machine guarding, employee training, and the use of personal protective equipment (PPE). Provision and Use of Work Equipment Regulations (PUWER): In the UK, PUWER requires that work equipment, including abrasive wheels, is suitable for its intended use, properly maintained, and only operated by trained personnel. European Safety Standards: In Europe, EN 12413 is the standard for bonded abrasive products. It sets out requirements for safety, marking, and product testing to ensure the safe use of abrasive wheels. Regular Inspections and Maintenance: Laws often require regular inspections and maintenance of abrasive wheels and related machinery to ensure they remain in safe working condition. Record Keeping: Employers must keep records of all training, inspections, and maintenance activities related to abrasive wheels. How to Get Certified in Abrasive Wheels Training Getting certified in abrasive wheels training involves completing a recognized course and passing the necessary assessments. Here’s how you can achieve certification: Find a Training Provider: Look for accredited training providers that offer courses on abrasive wheels. Valley Plant Training is a well-known provider that offers comprehensive abrasive wheel training courses. You can also search for “abrasive wheel training near me” to find local providers or explore online options. Enroll in an Abrasive Wheel Course: Choose a course that covers both theoretical and practical aspects of abrasive wheel safety. The course should include topics such as wheel selection, proper mounting, safe operation techniques, and maintenance. Valley Plant Training offers courses that meet these criteria. Complete the Training: Attend the training sessions and participate actively. Training can be done in-person or online, depending on your preference and availability. Online courses can be convenient and flexible for busy schedules. Pass the Assessment: At the end of the course, you’ll need to pass an assessment to demonstrate your understanding of the material. This may include a written test and a practical demonstration of your skills. Receive Your Abrasive Wheels Certificate: Upon successful completion of the course and assessment, you will receive an abrasive wheels certificate. This certificate is proof that you have been trained in the safe use of abrasive wheels. Regular Refresher Courses: It’s important to stay updated with the latest safety practices and regulations. Consider taking refresher courses periodically to keep your skills and knowledge current. Valley Plant Training also offers refresher courses to help you stay up-to-date. Obtaining an abrasive wheel training certification from Valley Plant Training or another reputable provider not only enhances your safety and efficiency but also ensures compliance with legal requirements. It demonstrates to employers and regulatory bodies that you are qualified to handle abrasive wheels safely and effectively. Frequently Asked Questions What is abrasive wheel training? This is a training course that teaches you how to safely use and take care of machines that have abrasive wheels, like grinders. It covers choosing the right wheel, setting it up, and learning safety rules to prevent accidents. How much does abrasive wheels training cost? The price can change depending on where you are and who’s teaching the course. Generally, it might cost between £150.00 and £250 for the basic training. How long does abrasive wheels training last? Most basic courses take about a day to complete, around 6 to 8 hours. More detailed courses might take longer, especially if they include hands-on practice. Can abrasive wheel training be done online? Yes, you can learn the theory part online at your own pace. For learning how to actually use the wheels, you might need to attend a session in person to get practical experience. What are the two types of abrasive wheels? There are two main kinds: bonded and coated abrasive wheels. Bonded wheels are made of abrasive particles stuck together and are used for tasks like grinding or cutting. Coated wheels have a layer of abrasive glued to a backing material and are used for smoothing surfaces. What are the rules for abrasive wheels? The main rules include setting up the wheel correctly, wearing the right safety gear, checking the wheel regularly for damage, and following specific steps when using it to stay safe. There are also official safety standards you need to follow. Testing Of Candidates We will assess the delegates throughout the course on their levels of participation and understanding, they will demonstrate the inspection of various Abrasive wheels for damage and suitability. Then the delegates will complete a 25 question assessment paper at the end of the course. Successful delegates will be issued with the NPORS operator card Abrasive Wheels Training Covers: The requirements of the HASAW and PUWER and all associated regulations in respect of Abrasive Wheels. Hazards arising from the use of Abrasive Wheels and the precautions that should be taken. How to identify the Abrasive Wheel types and characteristics. Storage, handling and transportation of Abrasive Wheels. Inspecting and testing Abrasive Wheels. Personal protective equipment. Abrasive Wheels Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of abrasive wheels and the construction industry We have our own training centre for abrasive wheels conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment. Our abrasive wheels training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS abrasive wheels Tester to your site nationwide, to reduce the amount of time away from work Other course: Enhance your skills with our specialized courses, including Lift Supervision Training, Appointed Person Training, Telehandler Training, Cat & Genny Training, Slinger Signaller Training, Lorry Loader Training and Crusher Training. Each program is designed to equip you with the expertise needed for excellence in your field.

Abrasive Wheels Training
Delivered In-Person in Tewkesbury or UK WideFlexible Dates
Price on Enquiry

Occupational Health and Safety (Level 3) CIEH Intermediate Certificate (In-House)

By The In House Training Company

This course aims to provide managers and supervisors with a thorough understanding of the different aspects of health and safety in the workplace. With a focus on the role of supervision, learners on this course will develop the essential knowledge and understanding to enable them to discharge their health and safety responsibilities and ensure the safety of their workplace colleagues. The programme has a particular focus on:

Occupational Health and Safety (Level 3) CIEH Intermediate Certificate (In-House)
Delivered in Harpenden or UK Wide or OnlineFlexible Dates
Price on Enquiry

Effective Negotiation Skills Course

By Dickson Training Ltd

Negotiation is an everyday challenge for some whether it be in the office, field or at home. Have you ever walked away from a situation thinking "if I'd only put my thoughts, side, opinion or words across better"? This 2-day course is perfect for managers, supervisors and sales people. It will focus on negotiation skills and the techniques that go with it. In this energy-charged provision you'll learn and practice negotiation, assertiveness and influencing techniques. Course Syllabus The syllabus of the Effective Communication and Influencing course is comprised of seven modules, covering the following: Module One An Introduction to Negotiation Assessment of your current sales and negotiation strengths and improvement areas What is negotiation? Identifying objectives and all factors affecting negotiation The negotiation model - the four stages Module Two The Preparation Stage The significance of preparation and why we need to prepare What do you need to prepare? Preparing a set of objectives: yours and theirs Understanding constants and variables Researching the other party Creating a "win-win" situation Preparing yourself for possible set-backs and objections Module Three The Discussion Stage The importance of rapport building Opening the negotiation The power of effective questioning techniques Improving your listening skills Controlling emotions Spotting the signs - non-verbal communication and voice clues Module Four The Proposing Stage Stating your opening position Responding to offers How to deal effectively with adjournments Module Five The Bargaining and Closing Stage Making concessions - the techniques Adopting key bargaining skills Dealing with objections and underhand tactics Closing techniques Confirming the agreement Creating long term, lasting commitment Scheduled Courses Unfortunately this course is not one that is currently scheduled as an open course, and is only available on an in-house basis. Please contact us for more information.

Effective Negotiation Skills Course
Delivered in Bardsey + 3 more or UK Wide or OnlineFlexible Dates
Price on Enquiry

Coaching and Mentoring for Managers

By Dickson Training Ltd

The 2-day Coaching and Mentoring for Managers course is designed for organisations that want their managers and team leaders to apply practical coaching and mentoring skills in everyday work situations in order to develop the performance of those they are responsible for, as well as improving communication within the business. Previous attendees have included chief executives, general managers, and HR managers, right through to production line supervisors and office staff. In fact, anybody that has to work as part of a team and relies on other people's efforts will benefit from this programme. Course Syllabus The syllabus of the Coaching and Mentoring for Managers course is comprised of four modules, covering the following: Module One Introduction to Coaching and Mentoring Exploding the myths surrounding coaching Benefits of coaching and mentoring The role of a coach and mentor How to avoid everyday interference that takes your time away from coaching people to achieve results How motivation works The difference between mentoring, coaching, directing, supporting & delegating, and learning when it is necessary to apply them Why coaching is an action orientated partnership purely focused on measurable results Coaching and mentoring outcomes Module Two Managing a Coaching Session The most important skills of a business coach The key characteristics of a good coach How to ask powerful coaching questions Opportunity to role-play using the STAR/GROW model Module Three Mentoring in Action Mentoring suggestions The first meeting Between first and second meetings The second meeting The Experiential learning cycle Model discussions Frequent questions asked by Mentors Duration of mentoring End of relationships Module Four Putting Learning into Practice Building a bank of great coaching questions Demonstration of what has been taught in a live coaching/mentoring meeting Individual feedback from a professional coach Creating SMART action plans Getting started as a work coach/mentor Group review and feedback on new learning Action steps for new coaches Scheduled Courses Unfortunately this course is not one that is currently scheduled as an open course, and is only available on an in-house basis. Please contact us for more information.

Coaching and Mentoring for Managers
Delivered In-Person in Bardsey + 3 more or UK WideFlexible Dates
Price on Enquiry

Credit control training 'menu' (In-House)

By The In House Training Company

This is not a single course but a set of menu options from which you can 'pick and mix' to create a draft programme yourself, as a discussion document which we can then fine-tune with you. For a day's training course, simply consider your objectives, select six hours' worth of modules and let us do the fine-tuning so that you get the best possible training result. Consider your objectives carefully for maximum benefit from the course. Is the training for new or experienced credit control staff? Are there specific issues to be addressed within your particular sector (eg, housing, education, utilities, etc)? Do your staff need to know more about the legal issues? Or would a practical demonstration of effective telephone tactics be more useful to them? Menu Rather than a generic course outline, the expert trainer has prepared a training 'menu' from which you can select those topics of most relevance to your organisation. We can then work with you to tailor a programme that will meet your specific objectives. Advanced credit control skills for supervisors - 1⁄2 day Basic legal overview: do's and don'ts of debt recovery - 2 hours Body language in the credit and debt sphere - 1⁄2 day County Court suing and enforcement - 1⁄2 day Credit checking and assessment - 1 hour Customer visits and 'face to face' debt recovery skills - 1⁄2 day Data Protection Act explained - 1⁄2 day Dealing with 'Caring Agencies' and third parties - 1 hour Debt counselling skills - 2 hours Elementary credit control skills for new staff - 1⁄2 day Granting credit and collecting debt in Europe - 1⁄2 day Identifying debtors by 'type' to handle them accurately - 1 hour Insolvency: Understanding bankruptcy / receivership / administration / winding-up / liquidation / CVAs and IVAs - 2 hours Late Payment of Commercial Debts Interest Act explained - 2 hours Liaison with sales and other departments for maximum credit effectiveness - 1 hour Suing in Scottish Courts (Small Claims and Summary Cause) - 1⁄2 day Telephone techniques for successful debt collection - 11⁄2 hours Terms and conditions of business with regard to credit and debt - 2 hours Tracing 'gone away' debtors (both corporate and individual) - 11⁄2 hours What to do if you/your organisation are sued - 1⁄2 day Other topics you might wish to consider could include: Assessment of new customers as debtor risks Attachment of Earnings Orders Bailiffs and how to make them work for you Benefit overpayments and how to recover them Cash flow problems (business) Charging Orders over property/assets Credit policy: how to write one Council and Local Authority debt recovery Consumer Credit Act debt issues Using debt collection agencies Director's or personal guarantees Domestic debt collection by telephone Exports (world-wide) and payment for Emergency debt recovery measures Education Sector debt recovery Forms used in credit control Factoring of sales invoices Finance Sector debt recovery needs Third Party Debt Orders (Enforcement) Government departments (collection from) Harassment (what it is - and what it is not) Health sector debt recovery skills Hardship (members of the public) Insolvency and the Insolvency Act In-house collection agency (how to set up) Instalments: getting offers which are kept Judgment (explanation of types) Keeping customers while collecting the debt Late payment penalties and sanctions Letter writing for debt recovery Major companies as debtors Members of the public as debtors Monitoring of major debtors and risks Negotiation skills for debt recovery Old debts and how to collect them Out of hours telephone calls and visits Office of Fair Trading and collections Oral Examination (Enforcement) Pro-active telephone collection Parents of young debtors Partnerships as debtors Positive language in debt recovery Pre-litigation checking skills Power listening skills Questions to solicit information Retention of title and 'Romalpa' clauses Sale of Goods Act explained Salesmen and debt recovery Sheriffs to enforce your judgment Students as debtors Statutory demands for payment Small companies (collection from) Sundry debts (collection of) Terms and Conditions of Contract Tracing 'gone away' debtors The telephone bureau and credit control Taking away reasons not to pay Train the trainer skills Utility collection needs Visits for collection and recovery Warrant of execution (enforcement)

Credit control training 'menu' (In-House)
Delivered in Harpenden or UK Wide or OnlineFlexible Dates
Price on Enquiry