139 Supervisor courses in Chatteris

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

2 Day Supervising First Aid for Mental Health course is a specialized program catering to leaders and supervisors, equipping them with essential skills to foster a mentally healthy work environment.

Supervising First Aid for Mental Health | RQF Level 3 The RQF Level 3 Supervising First Aid for Mental Health course is designed to provide individuals with the knowledge and skills to effectively supervise and support others in the workplace who may be experiencing mental health issues or distress. This course aims to equip participants with a deeper understanding of mental health, enabling them to provide guidance, reassurance, and signposting to appropriate professional help. Understanding Mental Health: Participants will gain a comprehensive understanding of mental health, including common mental health conditions, their causes, and the impact they can have on individuals and workplaces. They will learn to recognize signs and symptoms of mental health issues and develop an understanding of the stigma and misconceptions surrounding mental health. Promoting a Positive Mental Health Culture: Participants will explore strategies to promote a positive mental health culture in the workplace. This includes raising awareness, reducing stigma, and fostering a supportive and inclusive environment that prioritises mental well-being. Providing Mental Health Support: Participants will learn how to provide immediate and practical support to individuals experiencing mental health issues or emotional distress. They will be trained in active listening skills, effective communication techniques, and providing non-judgmental and empathetic support. Signposting and Referral: Participants will develop the skills to signpost individuals to appropriate professional help and resources. They will learn about available support services, both within and outside the workplace, and how to facilitate access to these services. Crisis Management: Participants will be prepared to respond to mental health crises and emergencies. They will learn how to assess risk, manage situations involving self-harm or suicidal ideation, and understand the importance of maintaining personal and professional boundaries. Supporting Workplace Mental Health Policies: Participants will understand the importance of workplace mental health policies and how to support their implementation. They will explore the role of supervisors in promoting mental health, identifying potential triggers or stressors in the workplace, and implementing strategies to support employee well-being. Successful completion of the RQF Level 3 Supervising First Aid for Mental Health course indicates that participants have developed the necessary knowledge and skills to effectively supervise and support individuals experiencing mental health issues in the workplace. They will be equipped to provide guidance, signposting, and initial assistance, contributing to a mentally healthy and supportive work environment. It's important to note that this course does not qualify participants as mental health professionals or therapists. It is focused on providing basic mental health support and guidance in the workplace context. If participants wish to pursue more in-depth training or a career in mental health, they may consider further studies or qualifications in mental health counseling, psychology, or related fields. Suitability - Who should attend? The RQF Level 3 Supervising First Aid for Mental Health course is suitable for individuals who have a responsibility for supervising and supporting others in the workplace, particularly in relation to mental health. It is beneficial for supervisors, managers, team leaders, human resources personnel, and anyone in a position of authority or influence within an organization. This course is relevant for individuals across various industries and sectors who wish to develop their understanding of mental health, enhance their skills in supporting others, and contribute to creating a mentally healthy work environment. It is especially suitable for those who have regular interactions with employees or colleagues and are involved in promoting well-being and providing guidance. The course is valuable for individuals in roles where they may be responsible for implementing mental health policies, supporting employees facing mental health challenges, or providing initial assistance in crisis situations. It equips participants with the knowledge and skills to recognize signs of mental health issues, provide appropriate support and signposting, and contribute to fostering a positive mental health culture within their organization. While there are no strict prerequisites for enrolling in the RQF Level 3 Supervising First Aid for Mental Health course, some prior knowledge or experience in mental health awareness or first aid can be beneficial. However, the course is designed to accommodate learners with varying levels of understanding and experience in the field. It's important to note that this course does not qualify participants as mental health professionals or therapists. It focuses on providing fundamental knowledge, skills, and guidance for workplace mental health support. If you require more advanced or specialised training in mental health, it may be necessary to consider additional qualifications or seek professional development opportunities in specific areas of interest. Before enrolling in the course, consider the specific requirements and recommendations of your workplace or industry. Discuss the suitability and relevance of the course with your employer or supervisor to ensure it aligns with your professional development goals and responsibilities within your organization. Outcome / Qualification etc. Upon successful completion of the RQF Level 3 Supervising First Aid for Mental Health course, participants can expect to achieve several learning outcomes: Comprehensive Understanding of Mental Health: Participants will develop a thorough understanding of mental health, including different mental health conditions, their causes, and their impact on individuals and workplaces. They will gain knowledge about the prevalence of mental health issues and the importance of promoting mental well-being in the workplace. Recognition of Mental Health Issues: Participants will be able to recognize signs and symptoms of common mental health conditions, enabling them to identify when someone may be experiencing mental health issues or emotional distress. They will develop skills in observation, active listening, and empathy to assess the well-being of others. Effective Support and Signposting: Participants will acquire the skills to provide immediate support and guidance to individuals experiencing mental health issues. They will learn active listening techniques, effective communication strategies, and non-judgmental approaches to engage with and support others. They will also be able to signpost individuals to appropriate professional help and resources. Creation of a Mentally Healthy Workplace: Participants will understand their role in promoting a mentally healthy workplace culture. They will learn strategies to reduce stigma, raise awareness, and create a supportive environment that prioritizes mental well-being. They will also gain knowledge on how to implement workplace mental health policies and practices. Crisis Management and Referral: Participants will be prepared to respond to mental health crises and emergencies. They will develop skills in assessing risk, managing situations involving self-harm or suicidal ideation, and understanding the importance of timely and appropriate referral to professional mental health services. Supervision and Support Skills: Participants will develop skills in supervising and supporting others in the workplace who may be experiencing mental health issues. They will gain confidence in initiating conversations about mental health, providing guidance, and creating an atmosphere of trust and understanding. Successful completion of the RQF Level 3 Supervising First Aid for Mental Health course indicates that participants have achieved a higher level of knowledge and skills in supporting individuals with mental health challenges in the workplace. They will be equipped to provide appropriate support, signposting, and supervision, contributing to a mentally healthy and supportive work environment. It's important to note that while the course provides valuable knowledge and skills, participants should not consider themselves as mental health professionals. Ongoing professional development and engagement with mental health resources and services are essential to stay updated and provide the best support possible. Training Course Content DAY 1 Module 1 Introduction Module 2 What is first aid for mental health? Module 3 Identifying mental health conditions Module 4 Providing advice and starting a conversation Module 5 Stress Module 6 Drugs and alcohol Module 7 First aid action plan for mental health - including practical assessment Module 8 Mental health in the workplace Module 9 Depression Module 10 Anxiety Module 11 Written assessment - paper 1 DAY 2 Module 1 Syllabus and day 1 recap Module 2 Post-traumatic stress disorder Module 3 Self-harm Module 4 Suicide Module 5 Eating disorders Module 6 Personality disorders Module 7 Bipolar disorder Module 8 Psychosis Module 9 Schizophrenia Module 10 Written assessment paper 2 and course closure Course delivery details Classroom-based Training: Many training providers offer the course through traditional classroom-based sessions. Participants attend in-person training conducted by qualified instructors. These sessions provide opportunities for interactive discussions, practical exercises, case studies, and group activities to enhance learning and understanding of the course material. Blended Learning: Some training providers may offer a blended learning approach, combining both online and face-to-face components. Participants may complete certain modules or theory-based learning online at their own pace. The in-person sessions are then focused on interactive discussions, practical skills demonstrations, and group activities. Online Learning: In certain cases, the course may be delivered entirely online. Participants can access course materials, videos, interactive modules, and assessments through a dedicated online learning platform. Online learning offers flexibility in terms of when and where participants can engage with the course content. In-house Training: Organisations may opt for in-house training where a qualified instructor delivers the course directly to their employees or staff members. This can be customized to suit the specific needs and context of the workplace, allowing for more tailored discussions and examples relevant to the participants' roles and environment. Why choose Madeleys First Aid Plus Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU Won FSB Best start-up business in the West Midlands in May 2023 Now trained 100's of delegates in Physical and Mental Health First Aid Expenses Travel costs and lunch required, there are many cafes and sandwich bars here in Much Wenlock to buy your lunch, you may eat it in the training room. All training material, books, qualification certificates are included in the price. Continuing Studies Upon completing the RQF Level 3 Supervising First Aid for Mental Health course, there are various opportunities for continuing studies and professional development in the field of mental health and workplace well-being. Here are some options to consider: Advanced Mental Health Training: If you wish to deepen your knowledge and skills in mental health, you may consider pursuing advanced training courses. These could include specialized courses on specific mental health conditions, such as depression, anxiety, or post-traumatic stress disorder (PTSD). Advanced courses can provide you with a more in-depth understanding of specific areas within the mental health field. Mental Health First Aid Instructor Training: If you have a passion for teaching and training others, you might consider becoming a certified mental health first aid instructor. Instructor training programs can equip you with the necessary skills and qualifications to deliver mental health first aid courses to others. This allows you to contribute to building a mentally healthier workforce by educating and empowering others. Workplace Well-being Programs: Many organizations are investing in workplace well-being programs to support the mental health of their employees. You could explore opportunities to get involved in developing and implementing such programs within your organization. This might involve collaborating with human resources, management, or well-being teams to design initiatives that promote mental health, resilience, and work-life balance. Higher Education and Further Studies: If you're interested in pursuing a more extensive education in mental health, you may consider enrolling in higher education programs related to psychology, counselling, or mental health. This could include undergraduate or postgraduate degrees, diplomas, or certifications that provide a deeper understanding of mental health theory, research, and clinical practice. Continuous Professional Development (CPD): Engaging in continuous professional development is essential in staying updated with the latest research, best practices, and developments in the field of mental health. Attend workshops, conferences, webinars, and seminars focused on mental health topics. These activities will enhance your knowledge and skills and ensure you stay current with evolving practices in the mental health field. Volunteer and Community Work: Engaging in voluntary work or community initiatives related to mental health can provide valuable hands-on experience and further develop your skills. Consider volunteering with mental health organizations, helplines, or community groups that focus on mental health support and advocacy. Remember to stay informed about the guidelines, regulations, and requirements set by relevant professional bodies or organizations in your country or region. This will help you align your continuing studies and professional development with recognised standards and qualifications. Continuing studies and professional development not only enhance your knowledge and skills but also demonstrate your commitment to the field of mental health and workplace well-being.

Overview This course has been created to help safely navigate attendees through the minefield of absence management, paying attention to issues of systems, procedures and organisational culture along the way. Using a selection of exercises, activities and sample documents, the course examines some traditional methods of management as well as some more contemporary and innovative ways of keeping a lid on casual absence. Attendees will take away a number of practical tools and ideas to enable them to target performance improvement when back at their desks. Description It’s estimated that absence from work costs the UK economy over £13 billion per year, with the ‘average’ employee taking around seven days off sick annually. The need for managers, HR people and leaders to control absenteeism is critical if a company is to survive and prosper. But just what is ‘absence’? And how do we go about managing it and reducing it wherever we can, without falling foul of employment law? As well as the usual training material, attendees on this course also receive several useful handouts and exercises relating to absence management. Topics covered: An Absence Management Model – this section identifies a simple model for managers to apply when dealing with absenteeism Defining Absence – the text book definition will help learners clearly understand what is meant by absence Types of Absence – unravelling the different types of absence and distinguishing between absence and leave Classifying Absence – by classifying types of absence, the learner can begin to get a steer on how to manage it Statistics – identifying the real cost of absence and looking at regional and sector differences Reasons for Absence – considering the high-level issues that have an impact on absence, like culture and job design Causes of Sickness – here the national league tables of sickness causes are discussed, giving the learner the chance to reflect on their own team or company Absence Management – Stage 1 – contracts, policies, procedures and legal entitlements are all examined here, to allow learners to get a grasp of what they have to know to Absence Management – Stage 2 – record keeping, costing absence and benchmarking provide the chance for analysis and understanding in the context of the learner’s own organisation Absence Management – Stage 3 – setting out the skills and interventions that managers need to apply in the effective management of absence, including: communication, professional advice, workplace issues and return to work interviews Traditional Approaches – an examination of performance management, sick pay, discipline, recruitment and selection and how these can lend themselves to effective absence management Reducing Absenteeism – through less traditional approaches, looking at ‘carrots and sticks’, targets, employee assistance, unusual initiatives and organisational culture. Recent Developments – considering the impact of ‘fit notes’ and potential pandemics. Who should attend This course has been designed for anyone that deals with absence or needs to have an awareness of the absence management process. This could include; Team leaders, supervisors, managers, HR professionals and anyone else involved in the management of people or organisations. Requirements for Attendance None.

Mental Health "First Aid" Training

Embark on a journey to become a workplace hero with our comprehensive one-day First Aid course. This dynamic and engaging training program is designed to equip you with the essential skills and knowledge needed to handle emergency situations confidently and effectively.

A popular 3 day programme aimed at team supervisors and managers. Develop skills in managing yourself, your job and managing others.

Embark on a journey to become a workplace hero with our comprehensive one-day Pediatric First Aid course. This dynamic and engaging training program is designed to equip you with the essential skills and knowledge needed to handle emergency situations confidently and effectively.

Well-being isn't just a 'nice to have' - it should be a core part of your employee strategy.

This half day course is designed to help relatively inexperienced managers and supervisors to manage their staff effectively. The course can be run as a one-off session or can be incorporated into a series of sessions on managing staff. Alternatively it can be run as a day session and incorporate elements of the Managing the Difficult Staff member course. The course can concentrate on managing paid staff or (for voluntary and community sector organisations) can include aspects of supervising and supporting volunteers as well.