168 Educators providing Mechanic courses

Thanks to funding from Pendle Borough Council and Lancashire County Council, Pendle YES Hub is able to provide adults in Pendle with free bike hire! Bikes are available to hire for as little or as long as you'd like, subject to availability. There are a range of sizes and styles of bikes available, so if you have a particular bike in mind please let us know when making your booking. Bikes can be collected from Pendle YES Hub, Scotland Road, Nelson, BB8 7UT. When making your booking, the information you provide will be used for data monitoring purposes only. Card details will be taken at the time of booking as security in the event of damage or non-return of the bike, but no charges will be made unless necessary. Your details will be deleted from the system once the bike has been returned and inspected by a mechanic. If you do not have a bank card, please contact Pendle YES Hub on 07859 739635. We do not take same-day bookings via our website, however we may have availability so please call us to check. Once your booking has been created, it will be approved within 48 hours. Please bring your booking confirmation email with you when collecting your bike. Bikes cannot be hired out to those under the age of 18, you may be asked for proof of age upon collection if you look under 18.

Thanks to funding from Lancashire County Council, Active Cycles Bike Hire Library is offering adult bikes for hire completely free of charge. Bikes are available to hire for as little or as long as you'd like, subject to availability. There are a range of sizes and styles of bikes available, so if you have a particular bike in mind please let us know when making your booking. Bikes can be collected from Active Cycles, Accrington Arndale Centre, BB5 1PL. When making your booking, the information you provide will be used for data monitoring purposes only. Card details will be taken at the time of booking as security in the event of damage or non-return of the bike, but no charges will be made unless necessary. Your details will be deleted from the system once the bike has been returned and inspected by a mechanic. If you do not have a bank card, please contact the shop on 01254 919393 or visit us in person on Tuesdays or Thursdays, 10:30AM - 3:30PM. We do not take same-day bookings via our website, however we may have availability so please call us to check. Once your booking has been created, it will be approved within 48 hours. Please bring your booking confirmation email with you when collecting your bike. Bikes cannot be hired out to those under the age of 18, you may be asked for proof of age upon collection if you look under 18.

Any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulations). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. F Gas regulations Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

Thanks to funding from Cycling UK, Active Cycles is excited to offer free Bike Maintenance and Repair sessions this Summer! Our expert mechanics will be on hand to check the safety of your bike and perform small fixes to help get you cycling this summer! You do not need to have purchased a bike from Active Cycles in order to access these sessions, but please note we cannot accommodate for specialist bikes or e-bikes.

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

The F Gas Regulations course will suit any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas Regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulation). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

This is a two week programme incorporating eight different modules including: Module 1 - Basic Electrics and PAT Module 2 - Engines / Power Systems Module 3 - Non-Mechanical Equipment Module 4 - Basic Hydraulics and Hydrostatic Drive Module 5 - Powered Access Equipment Module 5 LLA - Low Level Access specific element Module 6 - Workshop H&S Essentials Module 7 - Materials Hoists including Sumner 2000 series and Genie SLAs During the programme the learner is inducted on their Level 2 NVQ in Plant Maintenance or Level 3 in Thorough Examination. One week with us and then a period back at work (4 weeks or less) to gather work based evidence and then a further week back at our Penybont training centre ​At 1/2 a point per course the training is worth up to 4 points towards your IPAF CAP certification. The Level 2 PM is worth a further 2 points and the Level 3 Thorough Examination is worth 4 points.

This course outlines exactly what constitutes manual handling and covers the regulations and legislation that apply to manual handling tasks. It then goes on to cover safe handling techniques and how to develop good habits in relation to manual handling. It finishes off by introducing some practical solutions and the use of mechanical aids. Please note that this is an awareness course only, if your duties include manual handling you will also need further practical training, you can get in touch with us to arrange this. Learning Objectives Define Manual Handling and state the correct technique and application of effective Manual Handling. Understand the relevant legislation and comply with the regulations. Recognise safe handling techniques and be able to develop good habits. Evaluate every manual situation you encounter, recognising risks and when to use mechanical aids. Understand the consequences on the body of incorrect handling and the dangers associated. State the professionals most at risk from incorrect handling techniques.