602 Lead courses in Leicester

NPORS Appointed Person Course or Training NPORS Appointed Person Lifting Operations Training is aimed at anyone who is required to plan safe systems of work using lifting equipment and to gain the NPORS Appointed Person operator card. The aim of the course is to provide candidates with underpinning knowledge to prepare them for the role and responsibility. It is recommended that prior to attending this course individuals should have some experience of working with lifting equipment, especially mobile cranes. It is important that all delegates have a good understanding of spoken and written English for the appointed person course. NPORS is an approved CSCS Partner Card Scheme, firstly providing evidence that individuals working on construction sites have the appropriate training and qualifications but more importantly for the safe operation of the appointed person. Furthermore, training criteria is based on the approved standards of the Construction leadership Council. Experienced Appointed Person Test For experienced Appointed Persons you must complete a 1 day refresher training course. For refresher training you must have held a certificate or card in the past Appointed Person Course Duration: Experienced Worker Test: 1 day refresher training, maximum of 6 candidates Novice: 5 day’s training, maximum of 6 candidates Location*: Tewkesbury or at our clients’ site nationwide Mileage and accommodation charges may apply Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. CSCS Health & Safety Test If you require the NPORS Appointed Person Red operator card with the CSCS logo on then you must have completed the operatives health and safety test within the last two years. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. The Appointed Person Course Includes: This Appointed Person Course covers essential legislation, crane appreciation, lifting accessories, and planning lifting operations. It culminates in writing a risk assessment and method statement. Legislation LOLER, PUWER, HASAWA. Codes of practice BS7121. Roles and responsibilities of personnel involved with lifting operations. Crane appreciation, crane types, capabilities and limitations. Duty charts. Crane terminology. Documentation and certification for lifting equipment and lifting accessories. Crane stability/ground conditions. Safe Load Indicators (SLI) and Safe Working Loads (SWL). Lifting accessories. Types of accessories and use. Slinging techniques. Down rating of accessories. Sling angles. Communications. Planning a lifting operation. Writing a risk assessment (end test). Writing a method statement (end test). Appointed Person Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of lifting equipment and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the AP Course. Our Appointed Person training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Appointed Person Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. What is the NPORS Appointed Person Lifting Operations Training? This training is designed for individuals required to plan safe systems of work using lifting equipment. It provides the knowledge necessary to prepare for the role and responsibilities of an Appointed Person. 2. Who should take this course? Anyone involved in planning and managing lifting operations, especially those with prior experience with lifting equipment, should take this course. 3. What does the course cover? The course covers legislation, codes of practice, roles and responsibilities, types of cranes, duty charts, lifting accessories, risk assessment, and method statement preparation. 4. How long is the course? The course duration is 5 days for novices and 1 day for experienced individuals seeking a refresher. 5. What certification do I receive upon completion? Participants receive an NPORS Appointed Person operator card, valid for 5 years or an NPORS card with CSCS logo. 6. Are there any prerequisites? Candidates should have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

NPORS Plant Loader Securer Training The NPORS plant loader securer training course is intended for delivery drivers who operate plant equipment to load on to delivery vehicles, additionally for workers who are responsible for securing the plant using various securing equipment. Unsafe loads on vehicles injure more than 1,200 people a year and cost UK businesses millions of pounds in damaged goods. There has been an increasing number of accidents involving mobile plant during loading/unloading or during transportation resulting in fatalities. In line with recommendations from the Safety of Loads on Vehicles from the Department Of Transport, the course will provide both theoretical and practical training to ensure candidates are able to carry out the duties of Plant Loader Securer. NPORS is an approved CSCS Partner Card Scheme, providing evidence that individuals working on construction sites have the appropriate training and qualifications for the plant loader securer duties. Furthermore, training criteria is based on the approved standards of the Construction Leadership Council. Visit our page; The Art Of Securing Loads Experienced operator – NPORS Plant Loader Securer Test Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Plant Loader Securer Experienced Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Plant Loader Securer Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS Plant Loader Securer Test is for operators who have received some form of training in the past or alternatively has been operating the Plant Loader Securer for several years. If you are unsure if you qualify to go down the test route please contact us to discuss this in more detail. Discounts are available for multiple bookings There are two parts to the plant loader securer test, a theory section comprised of 25 questions and a practical session. Plant Loader And Securer Course Objectives Plant Loader and Securer Training covers: Legislation: All relevant health and safety and current legislation and British Standards Loading: Load or guide items of plant onto a transporter. Position items of plant on the transporter to ensure no overloading of transporter axles. Ensure integrity and security of items of plant plus attachments using a range of restraining equipment Preparations: Prepare an area for the purposes of loading and unloading construction plant. Prepare a transporter for receiving different items of construction plant, which must include tracked, wheeled and roller types. Agree and give appropriate signals to the plant operator. Check equipment prior to operations Travel: Prepare a transporter for road travel. Ensure intended route of travel is compatible with load weight, width and height. Explain the specific requirements of current legislation for equipment designed for transporting construction plant. State the requirements to be undertaken when loading and unloading plant on the public highway. Plant Loader Securer Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of the loading and securing and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury, however this course must be on your site. With its own purpose-built practical training area to simulate an actual working environment. Our Loader Securer training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Plant Loader Securer Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. Who should take the Plant Loader Securer Training? This training is intended for delivery drivers operating plant equipment to load onto delivery vehicles and workers responsible for securing the plant using various securing equipment. 2. What does the Plant Loader Securer Training cover? The course covers legislation, load and guide items of plant, preparing areas for loading/unloading, securing equipment, preparing transporters for road travel, and ensuring compliance with safety requirements. 3. How long is the Plant Loader Securer Training? For novice operators, the training lasts 2 days. Experienced operators can take a 1-day test. 4. What certification do I receive upon completion? Participants receive an NPORS card, either the traditional card valid for 5 years or the NPORS card with CSCS logo, valid initially for 2 years. 5. Are there any prerequisites for the Plant Loader Securer Training? Candidates must have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. More courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today. For those looking for a “NPORS Plant Loader Securer Training near me,” our widespread operations make it convenient for you to access Vally Plant Trainings top-quality training no matter where you are in the UK

NPORS Crusher Training The aim of the NPORS Crusher Training is to provide theoretical and practical training for operators of Mobile Crushing equipment in the workplace. This Crusher training Course Or Test is carried out on your site using your own equipment. Please contact us for a competitive quote The Crusher Training Course is designed to provide candidates with the skills and knowledge required in order to operate a crusher safely and competently in the workplace. NPORS is an approved CSCS Partner Card Scheme, providing evidence that individuals working on construction sites have the appropriate Crusher training and qualifications for the Crusher Operation. Furthermore, training criteria is based on the approved standards of the Construction Leadership Council. Most major contractors should accept the NPORS Crusher card when presented on-site, which displays the silver CSCS logo. This NPORS crusher training meets the statutory requirements of the Health & Safety at Work Act 1974 and other relevant statutory provisions and Approved Codes of Practice. NPORS Crusher Test For Experienced Operators Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Crusher Experienced Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Crusher Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS Crusher Test is for operators who have received some form of training in the past or alternatively has been operating Crusher for a number of years. If you are unsure if you qualify to go down the test route please contact us to discuss this in more detail. Discounts are available for multiple bookings There are two parts to the Crusher Test, a theory section comprised of 25 questions and a practical session operating the Crusher, revision notes are available when booking. Crusher Course Content Crushers are essential equipment in mining, quarrying, and construction industries, tasked with breaking down large rocks and materials into smaller, more manageable sizes. Operating mobile crushers requires specialised skills and knowledge to ensure safety, efficiency, and optimal performance. In this comprehensive course overview, we will explore the essential content covered in a crusher training course, designed to equip participants with the expertise needed to operate crushers safely and effectively in the workplace. 1. Introduction to Crushers: Overview of crusher types: jaw crushers, cone crushers, impact crushers, etc. Understanding the components and operating principles of crushers Different configurations and applications for specific tasks 2. Crusher Safety Procedures: Importance of safety in crusher operation Pre-operational checks and inspections Understanding crusher capacities and limitations Personal protective equipment (PPE) requirements Emergency procedures: shutdown, lockout/tagout, and evacuation protocols 3. Crusher Operation Basics: Starting, stopping, and controlling the crusher, including emergency stops Familiarisation with crusher controls: power source, conveyor belts, feeders, etc. Monitoring and adjusting crusher settings for optimal performance Understanding crusher dynamics: feed size, speed, and throughput 4. Material Handling and Crushing Techniques: Proper assessment of materials: hardness, size, and moisture content Loading and feeding materials into the crusher safely and efficiently Adjusting crusher settings for different material types and sizes Maximising crusher efficiency and product quality 5. Site Safety and Hazard Awareness: Identifying potential hazards in the crusher area Working safely around moving parts, conveyor belts, and rotating equipment Recognising environmental hazards: dust, noise, and vibration Understanding site-specific safety rules and regulations 6. Maintenance and Inspections: Importance of regular maintenance for crusher performance and reliability Daily, pre-shift, and post-shift inspection procedures Lubrication points and maintenance schedules Identifying and reporting mechanical issues and wear parts replacement 7. Practical Hands-On Crusher Training: Moving the crusher in reverse and forwards through obstructions Loading and feeding materials into the crusher using excavator and loading shovels Adjusting crusher settings and monitoring performance for efficiency Emergency response drills: simulated scenarios to test response and decision-making skills 8. Assessment and Certification: Written examination to assess theoretical knowledge Practical assessment of crusher operation skills Certification upon successful completion of the course Conclusion: A crusher training course equips participants with the essential knowledge, skills, and confidence to operate crushers safely and efficiently in various work environments. By covering topics such as safety procedures, operation techniques, material handling, site safety awareness, best maintenance practices, and practical hands-on training, participants can enhance their proficiency and contribute to a safer and more productive workplace. Whether you’re a novice operator or an experienced professional, investing in crusher training with Vally Plant Training is essential for ensuring compliance, reducing risks, and maximising productivity in crushing operations. Frequently Asked Questions About Crusher Training What is Crusher Training, and why is it necessary? Crusher Training provides individuals with the skills and knowledge required to safely and effectively operate crushers, heavy machinery used in mining, construction, and recycling industries. It’s essential for ensuring operator safety, maximising productivity, and preventing accidents on job sites. Who should undergo Crusher Training? Crusher Training is essential for anyone involved in operating or working around crushers, including quarry workers, machine operators, maintenance personnel, and site supervisors. Proper training ensures that individuals understand equipment operation procedures and safety protocols. What topics are covered in Crusher Training programs? Crusher Training programs cover a range of topics, as above, including equipment familiarisation, safety precautions, preventive maintenance, operational techniques, troubleshooting, and emergency procedures. Participants learn how to operate crushers efficiently while prioritising safety and minimising risks. How long does Crusher Training take? The duration of Crusher Training programs varies depending on factors such as the complexity of the equipment and the depth of the curriculum. Basic training courses may last a couple of days, while more comprehensive programs could extend over 1 week to cover advanced concepts and practical applications. Is Crusher Training mandatory in certain industries? While Crusher Training may not be legally mandated in all areas, many employers in the mining, construction, and recycling industries require operators to undergo training as part of their occupational health and safety policies. Compliance with training requirements helps prevent accidents and ensures regulatory compliance along with productivity. Where can I find reputable Crusher Training courses? Reputable Crusher Training courses are offered by various institutions, including industry associations, equipment manufacturers, and specialised training providers like Vally Plant Training. It’s important to choose a program that offers accredited certification and covers relevant industry standards and best practices. Crusher Courses Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable Crusher instructors, who have a wealth of knowledge of crushers and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment, however, Crusher Training can only be conducted on your sites Our Crusher course and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Crusher Tester to your site nationwide, to reduce the amount of time away from work and complete the crusher test Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

This course applies strategic direction to the procurement process, aiding the evaluation of the supply market environment and its complex dynamics.

Spanish language courses

One of our greatest strengths is our ability to tailor any of our open management courses to the needs and requirements of different businesses in different industries. We understand that whilst our open management training courses provide a wealth of knowledge in their particular area of focus, not all of it may be relevant for your business and the particular industry you operate in.Rather than making delegates sit through management training that is irrelevant to their job role, we offer bespoke management training where we tailor the course to cover the specific needs of your organisation, ultimately relieving the inevitable boredom and "switching off" that would come with having to sit through training that a person knew they would not need. Why choose us for your bespoke management training needs? We have provided tailored, bespoke management training courses to some of the largest organisations in the UK. Using our acquired experience and knowledge of running these courses, we will be able to work with you to create a bepoke management training programme that delivers a significant return on investment, both in terms of tangible and intangible results. ILM accredited management training courses Because we charge a daily training rate rather than a per delegate fee, if you have a number of delegates requiring management training, a bespoke management training course can often be less expensive than putting them all on an open course. A number of courses have been accredited by the ILM, which means you can be assured as to the standard of the course content and delivery. For more information on these, please see our page on ILM Management Training. All of our ILM Programmes are provided in partnership with BCF Group Limited, which is the ILM Approved Centre we deliver under. Interested in finding out more about bespoke management training? Between us, we can come up with a training plan which will provide relevant, bespoke management training for your delegates which will maximise the return on both your time and cost. We are happy to come to your premises or arrange training facilities nearer to your location if this would be more convenient. Feedback Below is a small selection of past feedback for our management training and development courses and programmes: "Excellent instructor. I looked forward to our monthly lectures knowing that I would have a good laugh but also that I would learn more about the subject and myself. He has been very helpful to me and the rest of the students, not just during the lectures but often in his own time. His enthusiasm for all of the subjects covered during the course was evident throughout, which again helped me to enjoy and understand the subjects and lectures.  If I get the chance in future to attend a further course with you, I would jump at the chance."Senior Acquisitions SurveyorGalliford Try "A very accomplished trainer and someone who I would very much like to be involved in our business training going forward. The feedback I have had from all levels of our team structure is excellent."Group HR OperationsEADS Personnel Services UK "Phil has a lot of energy which he throws into the course. This visably broke down resistance and attendees entered into the exercises wholeheartedly."Senior QSBullock Construction Scheduled Courses Unfortunately this course is not one that is currently scheduled as an open course, and is only available on an in-house basis. Please contact us for more information.

The RQF Level 3 Outdoor First Aid Course is designed for individuals engaging in outdoor activities, offering advanced training in managing emergencies specific to outdoor environments. Here's a concise overview: Specialised Training: Tailored for outdoor enthusiasts, professionals, and leaders involved in remote outdoor activities or expeditions. Comprehensive Skills: Covers assessing and managing injuries, trauma care, medical emergencies, and evacuation procedures relevant to outdoor settings. Scenario-Based Learning: Simulated outdoor emergencies, providing practical application of skills in realistic scenarios encountered during outdoor pursuits. Remote Environment Preparedness: Emphasis on handling emergencies where immediate medical assistance might be limited, focusing on adaptability and resource utilisation. Hands-on Training: Practical sessions demonstrating wilderness-specific first aid techniques, including the use of specialised equipment. Communication and Decision-making: Training in effective communication and teamwork during outdoor emergencies, fostering quick and coordinated responses. This course equips outdoor enthusiasts, guides, and professionals with advanced first aid skills, preparing them to manage a wide array of outdoor emergencies in remote or challenging environments. Suitability - Who should attend? The RQF Level 3 Outdoor First Aid Course is suitable for: Outdoor Enthusiasts: Hikers, climbers, campers, and adventurers seeking skills to manage emergencies during outdoor pursuits. Professional Guides: Outdoor leaders, expedition leaders, and instructors responsible for group safety during outdoor activities. Workers in Remote Environments: Forestry workers, park rangers, and those working in remote or wilderness settings where immediate medical help might be limited. Sports Coaches: Coaches involved in outdoor sports or activities requiring knowledge of first aid in outdoor environments. Volunteers and Community Members: Individuals participating in community-based outdoor programs or volunteering in remote areas. Professionals with Outdoor Responsibilities: Individuals whose roles involve outdoor responsibilities and the need for advanced first aid skills in such settings. It's ideal for anyone seeking to enhance their ability to respond to outdoor emergencies where access to immediate medical assistance is limited. Outcome / Qualification etc. The outcomes of completing the RQF Level 3 Outdoor First Aid Course include: Advanced First Aid Skills: Proficiency in managing a broad range of outdoor-specific injuries and medical emergencies encountered in remote settings. Confidence and Preparedness: Enhanced confidence to assess, manage, and provide first aid in challenging outdoor environments. Scenario Adaptability: Ability to adapt first aid skills to diverse outdoor scenarios and make informed decisions in remote or adverse conditions. Effective Communication: Improved communication and teamwork skills essential for coordinating responses to outdoor emergencies. Emergency Preparedness: Understanding evacuation procedures, resource improvisation, and utilising outdoor-specific first aid equipment. Certification: Attainment of an accredited qualification demonstrating competence in outdoor first aid management. Completing this course ensures participants are well-equipped to respond competently and effectively to a wide array of outdoor emergencies. Training Course Content UNIT 1 OUTDOOR EMERGENCY ACTION Module 1 Introduction Module 2 What is outdoor first aid? Module 3 First aid equipment Module 4 Summon assistance Module 5 Monitoring Module 6 Scene survey Module 7 Primary survey Module 8 Secondary assessment Module 9 Resuscitation and AED Module 10 Disorders of respiration Module 11 Wounds and bleeding Module 12 Hypovolaemic shock UNIT 2 OUTDOOR INCIDENT MANAGEMENT DAY 2 Module 1 Incident management Module 2 Bones, joints and muscle injuries Module 3 Head and spinal injuries Module 4 Chest and abdominal injuries Module 5 Major illnesses Module 6 Anaphylaxis Module 7 Extreme heat and cold Module 8 Burns Module 9 Eye injuries Module 10 Poisoning Module 11 Bites and stings Module 12 Written assessment and course closure Course delivery details The delivery of the RQF Level 3 Outdoor First Aid Course typically involves a combination of: Classroom Sessions: In-person training covering theoretical aspects of outdoor first aid, including lectures, discussions, and presentations. Practical Workshops: Hands-on sessions allowing participants to practice first aid skills specific to outdoor scenarios, utilising equipment and simulations. Outdoor Simulations: Realistic scenario-based training in outdoor environments, replicating emergencies encountered during outdoor activities. Interactive Learning: Engaging activities, group exercises, and case studies to reinforce learning and encourage interactive participation. Qualified Instructors: Training facilitated by experienced and certified outdoor first aid instructors knowledgeable about outdoor emergency management. Assessment and Certification: Evaluation of skills and understanding through practical assessments, quizzes, or examinations leading to certification upon successful completion. This mixed approach ensures a comprehensive understanding and practical application of first aid skills tailored for outdoor settings. Why choose Madeleys First Aid Plus Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU Won FSB Best start-up business in the West Midlands in May 2023 Now trained 100's of delegates in Physical and Mental Health First Aid Expenses Travel costs and lunch required, there are many cafes and sandwich bars here in Much Wenlock to buy your lunch, you may eat it in the training room. All training material, books, qualification certificates are included in the price Continuing Studies After completing the RQF Level 3 Outdoor First Aid Course, individuals may pursue further studies or complementary training, including: Advanced Outdoor First Aid Courses: Specialised courses focusing on specific aspects like wilderness trauma, advanced rescue techniques, or extended wilderness medical training. Wilderness Medicine Certification: Advanced programs offering in-depth knowledge in wilderness medicine, ideal for those aiming for higher expertise in outdoor medical care. Leadership and Outdoor Education Courses: Studies in leadership, outdoor education, or adventure sports coaching, complementing first aid skills for leadership roles in outdoor settings. Specialised Rescuer Certifications: Training in technical rescue skills, rope rescue, water rescue, or other specialized rescue techniques relevant to specific outdoor activities. Medical Certification Programs: Pursuing medical certifications or courses in emergency medicine, paramedicine, or healthcare, enhancing medical expertise for outdoor settings. Continued education allows individuals to deepen their understanding, broaden their skill set, and specialise further in managing emergencies in diverse outdoor environments

First Aid for Mental Health | RQF Level 2 First Aid for Mental Health qualification is designed to provide individuals with the knowledge and skills to support individuals experiencing mental health issues. This course aims to increase awareness of mental health, reduce stigma, and promote early intervention and support. The course covers various aspects of mental health, including common mental health conditions, signs and symptoms, and the impact of mental health issues on individuals and society. Participants will learn about different approaches to mental health, including self-help, accessing support, and signposting to appropriate services. The content of the RQF Level 2 First Aid for Mental Health course typically includes: Understanding Mental Health: An overview of mental health, including common mental health conditions such as depression, anxiety disorders, and stress. Participants will learn about the prevalence of mental health issues and their impact on individuals and society. Recognizing Mental Health Conditions: Understanding the signs, symptoms, and potential triggers of various mental health conditions. Participants will learn to identify early warning signs and risk factors for mental health issues. Promoting Positive Mental Health: Strategies and techniques for promoting positive mental health and well-being. This may include stress management techniques, self-care practices, and maintaining good mental health hygiene. Providing Mental Health First Aid: Techniques for providing initial support to individuals experiencing mental health crises or deteriorating mental health. Participants will learn how to offer non-judgmental listening, empathy, and reassurance to individuals in distress. Signposting and Referral: Understanding the importance of signposting individuals to appropriate professional help and support services. Participants will learn about local resources, helplines, and mental health organizations that can provide ongoing assistance. Self-Help and Resilience: Exploring self-help strategies and resilience-building techniques that individuals can use to manage their mental health and well-being. This may include relaxation techniques, mindfulness exercises, and developing healthy coping mechanisms. The course may be delivered through a combination of classroom-based instruction, group discussions, case studies, and practical activities. All our trainers are qualified and experienced in mental health education and support. Upon successful completion of the RQF Level 2 First Aid for Mental Health course, participants will receive a qualification that demonstrates their understanding of mental health issues and their ability to provide initial support to individuals experiencing mental health challenges. It's important to note that this course is not intended to replace professional mental health services or provide participants with the qualifications to diagnose or treat mental health conditions. It aims to equip individuals with the knowledge and skills to provide initial support and signposting to appropriate services. Suitability - Who should attend? First Aid for Mental Health course is suitable for a wide range of individuals who are interested in gaining knowledge and skills to provide initial support to individuals experiencing mental health challenges. Here are some examples of who the course may be suitable for: General Public: The course is open to anyone who wants to increase their understanding of mental health and learn how to support others effectively. It is suitable for individuals who want to develop their knowledge and skills in mental health first aid for personal reasons or to support friends, family members, or colleagues. Workplace Settings: The course is particularly relevant for individuals working in various professional settings, including but not limited to workplaces, schools, colleges, universities, community organizations, and voluntary sectors. It can benefit employees, supervisors, managers, and HR professionals who want to create a mentally healthy and supportive work environment. Healthcare Professionals: Healthcare professionals, such as nurses, doctors, paramedics, and allied health professionals, can benefit from the course to complement their existing medical knowledge and skills. The course equips them with additional tools and strategies to effectively respond to the mental health needs of their patients. Customer Service and Support Roles: Individuals working in customer service, hospitality, retail, or other client-facing roles can benefit from the course to enhance their ability to provide empathetic and supportive interactions with customers or clients who may be experiencing mental health challenges. Community Leaders and Volunteers: Community leaders, volunteers, and individuals involved in community organizations, charities, or support groups can gain valuable knowledge and skills from the course. It enables them to offer informed support and signposting to individuals within their communities who may be in need. It's important to note that the course does not require any previous qualifications or specific professional background in mental health. Participants should have a willingness to learn, an open mind, and a compassionate attitude toward individuals experiencing mental health challenges. However, it's also important to recognize that the course does not provide participants with the qualifications to diagnose or treat mental health conditions. Instead, it focuses on providing initial support, promoting awareness, and signposting individuals to appropriate professional help and services. Before enrolling in the course, individuals should consider their personal interest, commitment to learning about mental health, and their motivation to support others in this area. It is also recommended to check any specific requirements or prerequisites set by the training provider to ensure suitability for participation. Overall, the RQF Level 2 First Aid for Mental Health course is suitable for individuals from various backgrounds who want to develop their understanding of mental health and gain practical skills to provide initial support and signposting to individuals in need. Outcome / Qualification etc. Upon successful completion of the First Aid for Mental Health course, participants can expect to achieve the following outcomes: Increased Awareness and Understanding: Participants will develop a greater awareness and understanding of mental health, including common mental health conditions, their signs and symptoms, and the impact they can have on individuals and society. They will gain knowledge about the prevalence of mental health issues and the importance of promoting positive mental health. Enhanced Ability to Recognize Mental Health Conditions: Participants will acquire the skills to recognize signs and symptoms of various mental health conditions. They will be better equipped to identify early warning signs and risk factors, enabling them to provide timely support and intervention. Improved Mental Health First Aid Skills: Participants will learn techniques and strategies for providing initial support to individuals experiencing mental health crises or deteriorating mental health. They will develop skills in active listening, non-judgmental communication, and empathy, allowing them to offer appropriate assistance and reassurance to individuals in distress. Knowledge of Signposting and Referral: Participants will gain an understanding of the importance of signposting individuals to appropriate professional help and support services. They will learn about local resources, helplines, and mental health organizations, enabling them to provide accurate information and guide individuals to the appropriate sources of assistance. Enhanced Self-Help and Resilience Strategies: Participants will learn self-help strategies and resilience-building techniques that individuals can use to manage their own mental health and well-being. They will acquire practical tools for stress management, relaxation, and developing healthy coping mechanisms. Confidence in Supporting Others: The course aims to enhance participants' confidence in providing support to individuals experiencing mental health challenges. Through knowledge, skills, and practical exercises, participants will feel more prepared to respond appropriately and effectively in a compassionate and understanding manner. Qualification: Upon successful completion of the course, participants will receive an RQF Level 2 qualification in First Aid for Mental Health. This qualification demonstrates their understanding of mental health issues and their ability to provide initial support to individuals in need. It's important to note that the RQF Level 2 First Aid for Mental Health qualification is not intended to replace professional mental health services or provide participants with the qualifications to diagnose or treat mental health conditions. Instead, it aims to equip individuals with the necessary knowledge and skills to offer initial support and signposting, fostering a supportive and empathetic environment for individuals experiencing mental health challenges. Training Course Content Module 1 Introduction Module 2 What is first aid for mental health? Module 3 Identifying mental health conditions Module 4 Providing advice and starting a conversation Module 5 Stress Module 6 Mental health conditions Module 7 Drugs and alcohol Module 8 First aid action plan for mental health - including practical assessment Module 9 Mental health in the workplace Module 10 Assessment and course closure Course delivery details Classroom-Based or Virtual Instruction: The course may be delivered through traditional classroom-based instruction, where participants attend in-person training sessions led by a qualified instructor. The instructor will cover the course content, facilitate discussions, and provide guidance on practical activities. Blended Learning: Some training providers offer a blended learning approach, combining both online and face-to-face components. Participants may complete certain modules or topics online through interactive e-learning platforms or virtual classrooms. This allows for self-paced learning and flexibility before attending practical sessions or assessments in person. Interactive Discussions: The course often includes interactive discussions where participants can share their experiences, ask questions, and engage in conversations related to mental health. This encourages active participation, promotes peer learning, and provides opportunities for clarification and deeper understanding of the course content. Case Studies and Scenario-Based Activities: To enhance practical application, trainers may present case studies or scenarios related to mental health issues. Participants can work in groups or individually to analyse the situations, identify appropriate responses, and discuss possible strategies for providing support. Practical Skills Demonstrations: Trainers may demonstrate practical skills and techniques for providing mental health first aid, such as active listening, empathetic communication, and crisis intervention. Participants will have the opportunity to observe and learn from these demonstrations before practicing the skills themselves. Role-Playing and Simulations: Role-playing exercises and simulations may be used to simulate real-life scenarios and provide participants with hands-on practice in responding to mental health crises. This allows them to develop their skills in a safe and controlled environment and receive feedback from the trainer and peers. Assessment and Certification: Participants will undergo assessments to demonstrate their understanding of the course content and their ability to apply their knowledge and skills in practical scenarios. Successful completion of the assessments leads to the awarding of the RQF Level 2 First Aid for Mental Health qualification. It's important to note that the specific delivery methods and approaches may vary depending on the training provider, course duration, and the resources available. Participants should check with the training provider for detailed information on the course delivery format and any specific requirements or prerequisites for participation. Overall, the aim of the course delivery is to create an engaging and interactive learning environment that allows participants to gain the necessary knowledge, skills, and confidence to provide effective support to individuals experiencing mental health challenges. Why choose Madeleys First Aid Plus Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU Won FSB Best start-up business in the West Midlands in May 2023 Now trained 100's of delegates in Physical and Mental Health First Aid

This dynamic programme empowers attendees to enhance their emotional intelligence, forge meaningful connections in every interaction, engage in impactful coaching conversations, and cultivate resilience and psychological safety. Through interactive workshops, compelling discussions, and practical exercises, participants will acquire skills and insights necessary to foster a space for collaboration helping shape an environment of trust and openness in their professional and personal spaces