40 Courses in Sheffield

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

Public Speaking 1 Day Training in Sheffield

QA Level 3 Award In Emergency First Aid At Work (RQF) Full day course Gives learners the knowledge and skills to be an emergency first aider Recommended by HSE for low-risk workplaces Course Contents: The Roles and Responsibilities of an Emergency First Aider Assessing an Incident Minor Injuries Cuts, Grazes and Bruises Minor Burns and Scalds Managing an Unresponsive Casualty CPR Safe Use of an AED (Automated External Defibrillator) Choking Seizures Wounds and Bleeding Shock Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work The estimated cost of injuries and ill health last year was £15 billion The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes carrying out a risk assessment, appointing a suitable amount of first aiders and providing adequate first aid training Typically, first aiders will hold a valid certificate in either First Aid at Work (FAW) or Emergency First Aid at Work (EFAW) Our QA Level 3 Award in Emergency First Aid at Work (RQF) - EFAW - training course is the one recommended for first aiders in a low risk workplace Having the correct first aid provision in the workplace is not just a legal requirement, it is incredibly important for the safety of all members of staff! As this is a Regulated Qualification, employers can book this course for their employees in the safe knowledge that they have fulfilled their legal responsibilities for providing quality first aid training, without having to undertake any lengthy due diligence checks Accredited, Ofqual regulated qualification: Our Emergency First Aid at Work course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards. This means that you can be rest assured that your Emergency First Aid at Work Certificate fulfills the legal requirements and is a very good way to make sure you and your employees are trained in First Aid. The Ofqual Register number for this course is 603/2367/X

Business Networking 1 Day Training in Sheffield

These comprehensive Total Electrical 20 training courses fully meet the qualification certification requirements of Part P schemes and are aimed at non-electrical and electrical persons wishing to up-skill or re-train. The aim of the Total Electrical 20 training courses is to provide a level of competence, which will allow work to be safely and efficiently carried out on Electrical Equipment and Systems all within a 4 or 6 week period. A 4 week Total Electrical 20 training course which gives you the foundation knowledge you need to commence working as a domestic electrician. The Total Electrical 20 training courses are a mixture of both practical work and theoretical study, with the emphasis being put on as much practical as possible. This Total Electrical 20 training course can be supplemented to a 6 week course with additional modules to enhance your existing skills and therefore widen your market. The Total Electrical 20 training courses are designed to be as PRACTICAL as they possibly can be, with over 50% of the course time being practical, because we believe that the best way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there… There are NO hidden costs on our courses, everything is included. The above Total Electrical 20 training courses are inclusive of examination registration entry fees, stationary, and a FREE tool kit*. All test instrumentation required for the course will be available for use during the course, should you require to purchase you own, advice will be readily available to assist you with your selection. These items can either be pre-ordered or purchased during the course.

These comprehensive Total Electrical 20 training courses fully meet the qualification certification requirements of Part P schemes and are aimed at non-electrical and electrical persons wishing to up-skill or re-train. The aim of the Total Electrical 20 training courses is to provide a level of competence, which will allow work to be safely and efficiently carried out on Electrical Equipment and Systems all within a 4 or 6 week period. A 4 week Total Electrical 20 training course which gives you the foundation knowledge you need to commence working as a domestic electrician. The Total Electrical 20 training courses are a mixture of both practical work and theoretical study, with the emphasis being put on as much practical as possible. This Total Electrical 20 training course can be supplemented to a 6 week course with additional modules to enhance your existing skills and therefore widen your market. The Total Electrical 20 training courses are designed to be as PRACTICAL as they possibly can be, with over 50% of the course time being practical, because we believe that the best way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there… There are NO hidden costs on our courses, everything is included. The above Total Electrical 20 training courses are inclusive of examination registration entry fees, stationary, and a FREE tool kit*. All test instrumentation required for the course will be available for use during the course, should you require to purchase you own, advice will be readily available to assist you with your selection. These items can either be pre-ordered or purchased during the course.

The Level 3 International Foundation Diploma for Higher Education Studies (L3IFDHES) is usually a one-year pre-university qualification that provides students with an entry route to an overseas university. The L3IFDHES prepares students with the essential English language skills, key transferable study skills, cultural knowledge, and chosen specialisms that universities feel bridges the gap between high school and undergraduate study. In January 2023 we offer pathways in business and higher finance. With agreements in place with over 70 universities across the globe, students’ can progress with confidence to a higher education course for further study. Entry Requirements For entry onto the NCC Education Level 3 International Foundation Diploma for Higher Education Studies (L3IFDHES) qualification students must have successfully completed secondary school education. Students must also meet the English language entry requirements of: • IELTS minimum score of 4.5 or above OR • GCE ‘O’ Level English D7 or above Alternatively, a student can take the free NCC Education Higher English Placement Test which is administered by our Accredited Partner Centre’s.

An Exciting Practical Face to Face Course working with a heat press, for anyone wanting to learn new textile skills and techniques.

Gain advanced knowledge and practical skills in instructing buccal midazolam administration for epilepsy with our Level 4 Award course.

A simple pattern drafting course for anyone wanting to learn how to make their own blocks from scratch - great for teachers of GCSE & A Level Fashion & Textiles for both Art & Design and D&T.