7057 Courses near Highlands delivered Live Online

The main subject areas of the course are: Good practice in asbestos removal or remediation Asbestos Removal Control Plans Air sampling for asbestos Enclosures, clearance air monitoring and reporting

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

P402 Surveying and sampling strategies for asbestos in buildings is the industry standard qualification for asbestos surveyors. In addition to holding the qualification, asbestos surveyors are required to undertake and provide evidence of annual refresher training. Previously, BOHS provided two Refresher courses for this purpose: P402RM (Management) and P402RRD (Refurbishment and Demolition). This new course, RP402 Refresher - Surveying and Sampling Strategies for Asbestos in Buildings, replaces P402RM and P402RRD. RP402 Refresher enables candidates to revise and update their knowledge on all types of asbestos surveys, and to receive a certificate of course completion by passing a written examination, which covers both the theory and practice of surveying for asbestos in buildings.

Course Duration: Half-day, 1-day, or modular delivery over 2–3 sessions Target Audience: Managers, team leaders, HR professionals, and employees who want to foster trust, openness, and inclusivity within their teams or organisations. Course Objectives By the end of this course, participants will be able to: Understand the concept and importance of psychological safety. Recognise how psychological safety impacts team performance and wellbeing. Identify behaviours and practices that support or undermine psychological safety. Develop strategies to create inclusive, respectful, and open team cultures. Apply tools to encourage constructive feedback, innovation, and open dialogue. Course Outline Module 1: What is Psychological Safety? Definition and origin (Dr Amy Edmondson’s research) Why psychological safety matters: the business and human case Link between psychological safety, innovation, collaboration, and retention Misconceptions: It’s not about comfort or avoiding challenge Module 2: Assessing the Current Environment Signs of a psychologically safe vs unsafe environment Common team behaviours and leadership pitfalls Self-assessment: how psychologically safe is my team? Module 3: Building the Foundations The four stages of psychological safety: Inclusion safety Learner safety Contributor safety Challenger safety Role of trust, empathy, and emotional intelligence The leader’s role in creating safe environments Module 4: Practical Strategies to Foster Safety Encouraging open communication and constructive disagreement Creating space for risk-taking and vulnerability Responding to feedback and mistakes without blame Speaking up behaviours – how to model and support them Module 5: Embedding Psychological Safety into Team Culture Meeting practices that promote psychological safety How to give and receive feedback safely Inclusive decision-making and respectful challenge Recognising and rewarding candour and contribution Module 6: Leading with Psychological Safety Coaching conversations and active listening Managing difficult conversations and underperformance safely Supporting neurodiverse or marginalised voices Sustaining safety under pressure and during change Delivery Style Facilitated discussions and group work Role plays, reflection activities, and real-life scenarios Peer learning and action planning Optional pre-work or post-session surveys Course Materials Provided Participant workbook Psychological safety assessment toolkit Conversation starter guide Leadership checklist for building safety Personal and team action plan Optional Add-ons Team psychological safety assessments (anonymous survey) Post-course coaching or leadership debrief Co-delivery with DEI (Diversity, Equity & Inclusion) workshops Integration with feedback or team development programs

Course Duration: Half-day or full-day session (with options for virtual delivery or multi-part series) Target Audience: People leaders, team members, HR professionals, and employees at all levels who want to foster a mindset of continuous improvement, learning, and innovation within their team or organisation. Course Objectives By the end of this course, participants will be able to: Understand what a growth mindset is and how it contrasts with a fixed mindset. Recognise the impact of mindset on learning, collaboration, leadership, and performance. Identify individual and team mindset behaviours. Apply strategies to shift thinking and encourage a culture of experimentation, feedback, and perseverance. Create an action plan to promote growth mindset behaviours in their workplace. Course Outline Module 1: Understanding Growth Mindset What is a growth mindset? (Based on Carol Dweck’s research) Growth vs fixed mindset: beliefs, language, and behaviours How mindsets impact learning, feedback, risk-taking, and innovation Common myths and misconceptions about growth mindset Module 2: The Neuroscience of Change and Learning How the brain learns and rewires through effort and repetition The science behind resilience, motivation, and behaviour change Reframing failure as feedback Why psychological safety is critical for learning cultures Module 3: Identifying Mindsets at Work Recognising fixed mindset triggers (e.g., fear of failure, comparison, perfectionism) Team culture audit: are we reinforcing learning or performance-only behaviours? Case studies: organisations that built growth cultures Self-reflection: where do I show fixed vs growth mindset? Module 4: Cultivating Growth Mindset Behaviours Shifting language: praise effort, strategy, and persistence—not just results Giving and receiving feedback to promote learning Normalising experimentation and learning from setbacks Encouraging reflective practice and continuous improvement Module 5: Leadership and Culture Shaping The leader’s role in modelling a growth mindset Embedding growth mindset into performance conversations, goal setting, and team rituals Aligning rewards, recognition, and development frameworks Avoiding the "false growth mindset" trap Module 6: Building a Growth Mindset Action Plan Identify 3 key mindset-shifting strategies for your team or organisation Personal mindset goal: what will you shift in your daily language or habits? Commit to culture practices: team experiments, learning debriefs, celebration of effort Optional: accountability partner and 30-day mindset challenge Delivery Style Interactive workshop format Storytelling, real-world examples, and reflection Pair and group discussions, case scenarios, and mindset mapping Tools and templates to apply immediately in the workplace Course Materials Provided Growth Mindset Field Guide Growth vs Fixed Mindset Behaviour Grid Conversation prompts and feedback scripts Personal Mindset Reflection and Tracker 30-Day Growth Culture Challenge Template Optional Add-ons Pre-course mindset diagnostic or self-assessment Leader/Manager booster session on modelling growth mindset Follow-up team challenge or learning sprint Integration with performance management or onboarding programs

This course is aimed at those who analyse and identify asbestos from within samples collected on site

The main subject areas of the course are: Good practice in asbestos removal or remediation Asbestos Removal Control Plans Air sampling for asbestos Enclosures, clearance air monitoring and reporting

The main subject areas of the course are: health effects of exposure to asbestos fibres types of asbestos and uses of asbestos in buildings types of asbestos surveys conducting safe and effective asbestos surveys bulk sampling risk assessing and managing asbestos-containing materials personal protection and decontamination

We have expanded our asbestos awareness courses to specifically cover the awareness of asbestos in soils, made-ground and construction and demolition materials. Essential for geotechnical engineers, plant operators, civil engineering contractors and ground workers. The content of this course is designed to provide anyone whose work could foreseeably expose them to asbestos with sufficient knowledge to avoid putting themselves or others at risk, in line with regulatory requirements laid out in Control of Asbestos Regulations 2012, and specifically for those working on land with potential asbestos-contamination.

Course Objectives By the end of this course, participants will be able to: Differentiate between coaching and mentoring and understand their unique purposes. Apply effective communication and active listening skills in developmental conversations. Use coaching models to guide structured conversations. Build trust and psychological safety in coaching and mentoring relationships. Create actionable development plans and track progress. Understand ethical boundaries and confidentiality. Course Outline Day 1: Foundations of Coaching and Mentoring Session 1: Introduction and Context What is coaching? What is mentoring? Key differences and when to use each Benefits to individuals and organisations Session 2: Core Skills for Effective Coaching and Mentoring Active listening Powerful questioning Giving and receiving feedback Empathy and emotional intelligence Session 3: Building Trust and Creating Psychological Safety Establishing rapport Confidentiality and ethical guidelines Setting boundaries and expectations Session 4: Coaching Models and Frameworks GROW Model (Goal, Reality, Options, Will) OSKAR and CLEAR frameworks Practical application and role play Day 2: Practising and Embedding Coaching and Mentoring Session 5: The Coaching and Mentoring Conversation Structuring conversations Using real-life workplace examples Practice with feedback Session 6: Setting Goals and Development Plans SMART and CLEAR goal setting Creating growth-focused action plans Monitoring progress and accountability Session 7: Mentoring for Career and Leadership Development Mentor roles and responsibilities Supporting long-term growth and resilience Reverse mentoring and cross-generational partnerships Session 8: Embedding a Coaching and Mentoring Culture How to support coaching within your team or organisation Integrating into performance conversations Sustaining development through peer coaching and communities of practice Assessment and Evaluation Participation in discussions and practical activities Feedback on peer coaching/mentoring exercises Optional personal development plan submission Course Materials Provided Participant workbook Coaching and mentoring toolkit (templates, models, guides) Suggested reading and resource list