65597 Courses

2391-52 a + c paperwork resit

2392-10 REMOTE

This PLC-TIEM training course is aimed at personnel who already have some general experience of TIEM but who wish to learn the idiosyncrasies of a specific model or modify and expand existing programme codes. Digital input wiring (Sink/Source) Digital output wiring (Relay/Transistor) Analog input wiring (0-10V/4-20ma/RTD/Thermocouple/loadcell) Analog output wiring (0-10v/4-20mA) Inverter wiring Valve wiring Motor wiring Sensor wiring Fault finding Troubleshooting Please do not confuse us with cheap imitation courses, we offer first class PRACTICAL training using state of the art PLC systems and the latest software. These PLC’s have been carefully selected to match the latest current trends in industry, to match what industry is using. We DO NOT use simulator software, our training is very much hands on, allowing you the confidence when completing the course to work in the real world. You cannot gain this with simulators. Presently 90% of the industry run with Siemens S7 1200 PLC Why learn on something which isn’t used in the real world? Don’t get ridiculed in the real world, by having unusable theoretical skills. ALL our trainers are industry leaders, who are time served, experienced and highly qualified in the subject field, with a minimum of 20 years each in the industry. We can accommodate most makes of PLC’s, however, if you are new to the industry, we would HIGHLY recommend learning on the major players first using real PLC’s, real software and real training rigs. We are the ONLY accredited centre to also offer industry recognised, City & Guilds qualifications in PLC, which is run in tandem to the EAL qualification. We are ISO 9001, ISO 14001 and OSHAS 18001 approved. This is testament to our ongoing investment and the quality of training we provide

Endorsed by City & Guilds for the new 2020 2377 Electrical Equipment Maintenance and testing qualification, the course covers the requirements of the 5th Edition of The Code of Practice for the In‑Service Inspection and Testing of Electrical Equipment. The Code of Practice has been extensively updated and includes the requirements for managing and carrying out the in-service inspection and testing of electrical equipment. As part of the course, learners will have access to three practice examination tests in order to prepare for the City & Guilds In-Service Inspection and Testing of Electrical Equipment 2377. A certificate of completion is issued upon finishing the course which can then be presented to your local assessment centre in order to take the exam.

Who should learn? This course has been designed for those who are new to EV Charging Installations or for those requiring a better understanding of electric vehicle charging equipment installations. Learners using this course could be from any background or industry sector, from apprentices through to senior managers. Course Introduction This online course will cover the key aspects of the design, specification and installation of Electric Vehicle Charging Equipment Installation. This course will look at the requirements detailed in Section 722 of BS 7671:2018+A1:2020 as well as the IET Code of Practice for Electric Vehicle Charging Equipment Installation, 4th Edition. The course will also help to enhance your expertise on the best practice for Electric Vehicle Charging Equipment Installation, providing you with a deeper understanding of how to select and use the correct earthing systems to protect against electric shock as well looking into vehicle-to-grid, on street installations and smart infrastructure integration. We would recommend that you purchase a copy of The Code of Practice For Electric Vehicle Charging Equipment Installation, Fourth Edition to get the best out of this course. Learning Objectives Through this online course, you will learn: How to specify Electric Vehicle Charging Equipment Installations How to design electrical installations containing electric vehicle charging and supply equipment The steps involved in planning, installing and commissioning of electric vehicle charging points Key risks and hazards for various types of installation, and how to address them, including: Dwellings, Commercial and Industrial premises, On-Street installations, and filling stations.

Who is this Level 3 NVQ aimed at? The experienced worker qualification is for practising electricians with at least 5 years experience but have never formally completed an industry apprenticeship or equivalent Level 3 NVQ Qualification. This is suitable for self-employed and employed electricians. This is the Level 3 pathway for practising electricians to obtain your ECS Gold Card and JIB Grading. To complete the full qualification you will also need to: Have completed an AM2e Assessment Have a current Wiring Regulations Qualification BS7671 Have an initial verification qualification such as a C&G 2391-50 What’s involved in the qualification? After an initial Skills Scan, we will discuss the gaps that need to be filled and you will be assessed using a range of methods to complete the evidence gathering process.There will also be Professional Discussions to discuss areas of expertise and you can choose either an installation or maintenance route based on the work you carry out.There are seven Performance Units to be assessed for the qualification, these are: Apply Practices and Procedures for Maintenance Apply Health, Safety and Environmental Considerations Organise and Oversee the Electrical Work Environment Apply Design and Installation Practices and Procedures Terminate and Connect Conductors Inspect, Test and Commission Electrical Systems Apply Fault Diagnosis and Rectification On completion of the Experienced Worker assessment you will be able to use the qualification to apply for a JIB Gold Card. This qualification is for experienced electricians who can demonstrate over 5 years experience.It is not suitable for new entrants or those currently on an apprenticeship.

The Total EAL Inspection and Testing Level 3 package. The objective of this course is to provide you with an understanding of the practices/theory involved in the initial verification and commissioning of electrical installations and will cover both single and three phase systems. This EAL Combined 4337 and 4338 electrical course is ideal for people with limited experience of initial inspection, testing and verification and/or periodic inspection and testing of electrical installations. If you already work as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this may be the course for you. The objective of the course is to give you a good understanding of the theory/practices required to do both a periodic inspection and initial verification/commissioning of electrical installations. The course will improve both your inspection/testing and periodic skills.

Who is this Level 3 NVQ aimed at? The electrical NVQ is designed for those with five or fewer years of experience in the electrical industry, and who have completed their City & Guilds 2365 Level two and three diplomas. Prior to joining, candidates will be assessed on their readiness for the Level 3 NVQ. What does this Electrical NVQ cover? This Level 3 Diploma covers Domestic, Commercial, and Industrial sectors – it will include a range of units of New Installations such as: Health and Safety Overseeing and organising work environment Applying environmental legislation Inspection and Testing Fault finding Professional discussions with assessors AM2 (this is a separate course and has an additional cost.) This is not a training course; it is an assessment of competence. Unlike other courses, this will not be based in a classroom or workshop – instead, candidates will complete this qualification on work placement. Candidates will complete electrical installations on-site, and they will then be assessed by a qualified assessor, building their portfolio. Only a small amount of this will involve going to a training centre. Before entering a workplace, your assessor will go over and help you understand: How to build a portfolio What range of evidence is required to meet the qualification criteria What assessors are looking for in order for candidates to demonstrate full professional competence Assessors will use a range of methods to evaluate candidate’s electrical installations such as; witness testimony, photographic evidence, direct observation, and reflective accounts. How long does the NVQ take to complete? The length differs for each candidate as it depends on how quickly they take to cover the types of work required to complete all units. If you have been working in the industry, previous jobs can be used as evidence to hurry the process up. What qualifications will I gain? Once candidates have completed their portfolio and other assessments, they will gain a formal City & Guilds Level 3 NVQ certificate. When candidates have completed their NVQ, they must move on to the AM2 end point assessment, which must be completed at an AM2 approved centre, such as our Sheffield centre.

AM2 A6 resit

You need to have a good working knowledge of the 17th Edition as only the updates to the regulations will be covered. Save time and money by covering the topics you need for the new regulations, without having to go over all that you already know. It includes Amendment 2 to BS7671:2018+A2:2022.