5979 Courses

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

This EV charging course is intended to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. This training course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Also Covering: How EV charging works How to select the correct EV Charging Point Solution for the customers needs. Technical requirements of installing & the use of different earthing arrangements (TN-C-S/TT systems) Planning requirements, labelling & risk assessments How to carry out surveys & Pre Installation considerations Meeting the requirements of BS7671 Awareness of the IET code of practice for Electrical Vehicle Charging Equipment & Installation. Plus much more Why take this EV charging course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Add this important service to future proof your knowledge to allow extra inspection & testing plus new installation work with this electric vehicle charging course. We have a variety of charging units and simulated installs which means it is just as working on a real installation. Making this installers course real value for money.

Phoenix pottery and Art Studio offers pottery courses and classes, art and craft classes including The mindful Art Club, Glass fusing, festive workshops , painting , felting and many others. Close to Wigan and Warrington with easy Motorway access from Manchester and Liverpool and the Northwest.

🛡️ Protecting the Most Vulnerable Starts with You 🧒👵 The RQF Level 3 Safeguarding course empowers you with the knowledge to recognise, respond to, and report signs of abuse or neglect. 📘 Learn how to: 🔍 Identify signs of abuse 📞 Report concerns appropriately 🛠️ Take action to ensure safety and well-being 👥 Understand your responsibilities in safeguarding children, young people, and vulnerable adults Whether you work in education, healthcare, social care, or community services — this course is essential for creating safe and supportive environments. 📅 Enrol today and be a voice for those who need it most. #Safeguarding #ProtectVulnerablePeople #ChildProtection #SafeguardingTraining #RQFLevel3 #DutyOfCare #MakeADifference

💨 Master the Art of Oxygen Therapy 🩺 The RQF Level 3 Administration of Oxygen course is designed for healthcare professionals and support staff who need to safely and effectively administer oxygen therapy. 📚 What you’ll learn: ✅ Physiological principles of oxygen therapy ✅ Oxygen delivery systems & flow rate calculations ✅ Patient assessment & interpreting oxygen saturation ✅ Indications and contraindications for oxygen use Whether you're in a clinical setting or a first response role, this qualification equips you with critical, life-saving skills. 📅 Enrol now and enhance your emergency care capabilities! #OxygenTherapy #HealthcareTraining #FirstResponse #RQFLevel3 #MedicalTraining #LifesavingSkills #CPD

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Discover the secrets of crafting the perfect espresso from the comfort of your home with our interactive Home Barista Workshop at Etude Coffee. In this immersive two-hour session, set in the inviting atmosphere of our local roastery, you'll explore the essentials of espresso creation under the guidance of our expert baristas. Designed for coffee lovers at any skill level, this workshop is dedicated to unraveling the intricacies of using a home espresso machine. From selecting the ideal beans to achieving the perfect grind and tamp, you'll gain hands-on experience in extracting that flawless espresso shot. Moreover, we'll delve into the art of milk texturing, enabling you to prepare velvety smooth lattes and cappuccinos that elevate your home coffee experience to new heights. Whether you're a novice aiming to improve your morning coffee routine or a seasoned enthusiast looking to polish your espresso-making skills, this workshop offers valuable insights, practical expertise, and a warm community of coffee aficionados.

For those with some experience in latte art or needing a refresher, our Latte Art Improvers Workshop is a two-hour session where you'll brush up on your skills. We'll cover finer points of latte art for baristas or coffee enthusiasts who feel confident about pouring a heart and are ready to try some more intermediate patterns such as tulips and rosettas. The course is a hands-on, practical experience where you will work alongside Benny, an experienced speciality coffee barista, to learn all about latte art and up your game. You'll learn tips behind getting perfectly-textured milk, watch demonstrations and then use our top-quality equipment to have plenty of goes yourself at pouring patterns, with constant feedback and guidance. We also specifically cater towards non-dairy milk drinkers too, so please let us know in advance whether you would like to learn with oat milk or dairy by entering it in your booking notes. Three hour masterclass If you don't have any experience in latte art and want to start from scratch, we also run a 3-hour 'masterclass' which is perfect if you want a more comprehensive session. Please find more details on our website. Free coffee Included with your booking are two x 230gr bags of our speciality coffee for you to take home to enjoy and practice with! Request a date We usually run this workshop on a Thursday, Friday or Saturday at 5pm. We are regularly adding new dates but if you have a specific day you'd like to do the course then please use the request a date feature or contact us and we'll check our availability. Thank you.

Full Body Massage Training – Pamper Me School of Beauty & Massage Learn the art of full body massage with our accredited, hands-on training course in Guildford & Chertsey. Perfect for beginners or therapists looking to expand their skills, this course teaches you professional techniques to deliver a relaxing, effective massage tailored to client needs. You’ll receive: Accredited certification recognised in the beauty & wellness industry Small group training for personalised attention Practical, step-by-step guidance from experienced tutors Essential knowledge in anatomy, client care, and safe practice By the end of the course, you’ll have the skills and confidence to offer full body massage as a professional service – whether you want to work in a salon, spa, or start your own business. 📍 Locations: Guildford | Woking | Chertsey 📞 07308 521166 | 🌐 www.pampermefromheadtotoe.com

Our first aid at work training courses are in accordance with guidance provided by the Health & Safety executive (HSE) and are both fun and informative. This qualification should enable Learners to attain the knowledge and practical competencies needed to deal with a range of first aid situations. Learners should be able to demonstrate the practical administration of safe, prompt, effective first aid in emergency situations with an understanding of the role of first aider and include dynamic and realistic casualty simulation which puts the candidates through their paces. We hold the First Aid at Work course at our Education Centre in Ellesmere Port. We are also able to teach this course 'in-house' at our clients preferred site. Learners must be at least 14 years old on the first day of training and be able to perform tasks at floor level. There are no other formal entry requirements but we strongly recommend that Learners have a minimum of Level 1 in literacy and numeracy or equivalent.