• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

3306 Courses

Recruitment Skills 1 Day Workshop in Maidstone

By Mangates

Recruitment Skills 1 Day Workshop in Maidstone

Recruitment Skills 1 Day Workshop in Maidstone
Delivered In-Person + more
£595 to £795

AM2/AM2E/AM2S Assessment

4.7(1243)

By Technique Learning Solutions

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

AM2/AM2E/AM2S Assessment
Delivered in Clay Cross or Online + more
£500

Level 2 Asbestos Awareness

By Pathways Training

Who is this course for? This basic working with Asbestos safety training course is specifically designed for anyone who may be at risk from coming into contact with asbestos during the course of their work and which involves them using all necessary precautions and equipment to avoid working with asbestos containing materials [ACM]. IMPORTANT: This course does not train you to carry out any unlicensed, unlicensed notifiable work or licensed work on asbestos. You will need specific training for this. This course can also benefit the supervisor/manager responsible for those working in the construction and maintenance industry and looking for a basic understanding to better appreciate when to “stop the job” if suspected ACM’s are found. What are the objectives of the course? The aim of this course is to keep it simple and real, whilst all the key subject areas are covered of how to avoid working with asbestos. Course Content Different types of Asbestos Asbestos related diseases Asbestos product identification Where Asbestos can be found in premises Application legislation & Asbestos management The Asbestos register How to avoid exposure to ACMs Emergency procedures following exposure to ACMs

Level 2 Asbestos Awareness
Delivered In-Person in Hull + more
£75

PRP - Collagen Induction Therapy Course (GPT701)

4.6(39)

By Geopace Training

Platelet-rich Plasma (PRP) treatments Nationally Recognised Qualification No previous experience or qualifications needed Open College Network Accreditation Level 4 (as required for minimally invasive procedures) Covers standards set by HEE Employed (salon) or Self-Employed opportunities Basic understanding of English language required OPEN TO ALL APPLICANTS

PRP - Collagen Induction Therapy Course (GPT701)
Delivered in Milton Keynes + 1 more or Online + more
£295

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

By SMC Safety Solutions

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively. It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes. Course Content • Health and safety law and how it will apply to supervisors. • Your supervisory responsibilities in controlling site safety. • Risk assessments and the need for method statements. • Effective site inductions, toolbox talks and method statement briefings. • Monitoring site activities effectively. • Timely intervention when bad practice is identified. Prerequisites This course is for you if you are considering, or already have, supervisory responsibilities. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course
Delivered in Chelmsford or Online + more
£249

Data Protection (GDPR) Practitioner Certificate - live, online

By Computer Law Training

GDPR Practitioner

Data Protection (GDPR) Practitioner Certificate - live, online
Delivered Online + more
£1,350

Principles of Manual Handing

By Pathways Training

This course outlines exactly what constitutes manual handling and covers the regulations and legislation that apply to manual handling tasks. It then goes on to cover safe handling techniques and how to develop good habits in relation to manual handling. It finishes off by introducing some practical solutions and the use of mechanical aids. Please note that this is an awareness course only, if your duties include manual handling you will also need further practical training, you can get in touch with us to arrange this. Learning Objectives Define Manual Handling and state the correct technique and application of effective Manual Handling. Understand the relevant legislation and comply with the regulations. Recognise safe handling techniques and be able to develop good habits. Evaluate every manual situation you encounter, recognising risks and when to use mechanical aids. Understand the consequences on the body of incorrect handling and the dangers associated. State the professionals most at risk from incorrect handling techniques.

Principles of Manual Handing
Delivered In-Person in Hull + more
£75

C01M01 - FD&FA Fundamentals - BS 5839-1 (online)

5.0(4)

By Ember Compliance

This is a gateway course for all further learning in FD&FA systems.

C01M01 - FD&FA Fundamentals - BS 5839-1 (online)
Delivered Online + more
£230

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations

4.7(1243)

By Technique Learning Solutions

City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations
Delivered in Clay Cross + 1 more or Online + more
£120

Dangerous Goods Safety Advisor (DGSA) Course Sept 2025

By Total Compliance

DGSA training

Dangerous Goods Safety Advisor (DGSA) Course Sept 2025
Delivered Online & In-Person in Grantham
£1,269