405 Working At Heights courses

The aim of this module is to enable delegates to perform entry-type injured person rescue operations, in a Wind Turbine Generator, using industry standard rescue equipment, rescue methods and techniques, exceeding those of GWO Working at Heights. Valid GWO BST Module Working at Heights, GWO First aid and GWO Manual Handling certificates are prerequisites for participation.

This Course at a Glance Understand the term 'work at height' and the common working at height tasks Demonstrate the various legislation that applies to working at height Recognise the dangers of working at height and understand the basic use of ladders Understand the legal requirement under the working at heights regulations Understand the architect, designer and employer's responsibilities in ensuring the safety of those working at heights Evaluate the six key principles associated with the Risk Assessment Understand the hierarchy of control Know how to conduct proper and effective risk assessment through the five-stage process Evaluate the control and preventive measures to reduce the risk of falls from height Understand the methods used to minimise the potential consequences Working at Height Training Course Overview The Work at Height Regulations 2000, requires all employers to ensure that all the employees are qualified, experienced and equipped to handle any task at a height. This Working at Heights Training Course is designed to equip you with the required knowledge and skills to help you assess the potential dangers of working at height. You will be able to understand your legal duties as both an employer and an employee to assess, control and minimise risks and hazards from work at height. This course also outlines the procedure of conducting effective risk assessments and provides a concise insight into the hierarchy of controls. Working at height continues to be the biggest cause of death and severe injury in the UK workplace. Falls from height account for 35% of workplace fatalities with almost 25% resulting in death causing it to be the fifth leading cause of significant injuries at work, according to research conducted by the RIDDOR in 2020/21. The term 'work at height' refers to a variety of settings ranging from working on platforms, ladders, scaffolds, or stages to working alongside deep excavations and fragile surfaces that you could fall through. The consequences of working at height are extremely severe and one way to avoid such accidents from occurring is to train your workers or employees to work safely at heights Varied job activities require different knowledge and skills, therefore making sure the correct people are working on the proper tasks is extremely crucial to comply with the approved safety standards at work. Aside from falling, there are other dangers to be aware of when working at heights which include contact with overhead electrical services, falling debris, and the possibility of a working platform collapsing or overturning. Please note that this is merely an awareness course; if your job requires you to work at height, you will need further practical training. Get in touch with us to acquire your further practical training. Upon successful completion of this course, you will know how to properly use equipment and safe access procedures to reduce or eliminate the risk of falling and respond quickly and efficiently if any dangers arise while working at a height. Who should take this course? This Working at Heights Training Course is aimed at: Builders Contractors Window cleaners Decorators Warehouse Workers Construction Supervisors Construction Workers Roofers Whether you are a builder, supervisor or manager responsible for planning, supervising or managing the safety of your workforce working at a height or an employee exposed to working at heights on a regular basis, this course will set you up with the appropriate skills and knowledge to conduct risk assessment procedures and adapt effective preventive and control measures that ensure safety while working at heights. Entry Requirements There are no academic entry requirements for this Working at Height Training Course Online course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method This Working at Heights Training Course assesses learners through multiple choice questions (MCQs). Upon successful completion of each module, learners must answer MCQs to step into the next module. Through the MCQs it is measured how much a learner could grasp from each section. In the assessment pass mark is 75%. Course Curriculum Module 1: Introducing Work at Height Module 2: The Dangers of Work at Height Module 3: The Work at Height Regulations Module 4: Summary of Duty Holder's Responsibilities Module 5: Employer's Responsibilities Module 6: The Hierarchy of Control Module 7: Avoiding Work at Height Wherever Possible Module 8: Prevent Risk of Falls Module 9: Minimise Consequences Module 10: The Risk Assessment Module 11: Course Summary Recognised Accreditation CPD Certification Service This course is accredited by continuing professional development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Certificate of Achievement Valuable Certification On completion of this Working at Heights Training Course, you will be eligible to download CPD and IIRSM accredited free electronic certificate instantly. There is a minimal shipping charge applicable to get the hardcopy course completion certificate which is: Shipment Inside the UK = £5.99 International Shipment = £16.99 FAQs Is CPD a recognised qualification in the UK? CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Are QLS courses recognised? Although QLS courses are not subject to Ofqual regulation, they must adhere to an extremely high level that is set and regulated independently across the globe. A course that has been approved by the Quality Licence Scheme simply indicates that it has been examined and evaluated in terms of quality and fulfils the predetermined quality standards. When will I receive my certificate? For CPD accredited PDF certificate it will take 24 hours, however for the hardcopy CPD certificate takes 5-7 business days and for the Quality License Scheme certificate it will take 7-9 business days. Can I pay by invoice? Yes, you can pay via Invoice or Purchase Order, please contact us at info@lead-academy.org for invoice payment. Can I pay via instalment? Yes, you can pay via instalments at checkout. How to take online classes from home? Our platform provides easy and comfortable access for all learners; all you need is a stable internet connection and a device such as a laptop, desktop PC, tablet, or mobile phone. The learning site is accessible 24/7, allowing you to take the course at your own pace while relaxing in the privacy of your home or workplace. Does age matter in online learning? No, there is no age limit for online learning. Online learning is accessible to people of all ages and requires no age-specific criteria to pursue a course of interest. As opposed to degrees pursued at university, online courses are designed to break the barriers of age limitation that aim to limit the learner's ability to learn new things, diversify their skills, and expand their horizons. When I will get the login details for my course? After successfully purchasing the course, you will receive an email within 24 hours with the login details of your course. Kindly check your inbox, junk or spam folder, or you can contact our client success team via info@lead-academy.org

Trainer to Candidate Ratio: Working at Height Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Frist Aid Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Manual Handling Theory: 12 Students to 1 instructor; Practical: 12 Students to 1 instructor Fire Awareness: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Sea Survival: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Enhanced First Aid: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Advanced Rescue Training: Theory: 12 Students to 1 instructor; Practical: 4 Students to 1 instructor

The Level 1 Award in Construction Health & Safety is required by individuals who are looking to become eligible for the Green CSCS Card. A CSCS Card is required in order to access many construction sites, carry out basic duties and build relevant experience to enable them to progress their career onto the next stage allowing them to progress to a level 2 or 3 Qualification. This Level 1 Award will provide the basic knowledge and understanding of health and safety principles and procedures and delivers a comprehensive and technical overview in relation to many construction relevant topics that are operatives require in order to operate safely within the Construction sector. Topics covered include Risk Assessment, Manual Handling, Working at Heights, Moving Vehicles, Dust, Hazardous Substances, Asbestos, Welfare, Personal Hygiene, Fire, Work Equipment, Electricity, Underground Services, PPE, Mandatory signage and more!!!!! Candidates can undertake this qualification in a classroom based delivery followed by the CSCS test within a single day. The administration and photographs are included and the CSCS card is usually received within 5 to 10 days. The one day course can be delivered in any client venue or at various locations around the UK.

🌐 Water and Sewer Treatment Plant Safety Training Course Overview 🌐 Welcome to the comprehensive 'Water and Sewer Treatment Plant Safety Training' course, designed to empower professionals in the water and sewer industry with the knowledge and skills necessary to ensure a safe working environment. Our carefully curated modules cover a spectrum of crucial safety aspects, providing a holistic approach to workplace safety in water and sewer treatment plants. 🚰 Module 1: Introduction to Safe Water and Chemical Safety in Water Gain a foundational understanding of water safety protocols. Learn the essentials of chemical safety in water treatment processes. Acquire knowledge to identify and mitigate potential hazards. 👷‍️ Module 2: Personal Protective Equipment and Lockout Procedures Explore the importance of Personal Protective Equipment (PPE). Master lockout procedures to safeguard against unexpected equipment activation. Ensure a proactive approach to minimizing risks through effective safety measures. 🕳️ Module 3: Confined Space Safety and Chemical Handling Safety Develop skills for working in confined spaces safely. Understand best practices for chemical handling and storage. Implement safety protocols to prevent accidents and protect personnel. 🏭 Module 4: Machine Safety and Working at Heights Learn machinery safety guidelines specific to treatment plants. Acquire expertise in working at heights safely. Enhance overall plant safety with a focus on equipment and elevated workspaces. 🌡️ Module 5: Heat Stress Prevention and Emergency Preparedness Implement strategies to prevent and manage heat stress. Develop emergency response plans to address unforeseen situations. Ensure the well-being of personnel under various conditions. 🚨 Module 6: Hazardous Material Spill Response and Continuous Improvement Master the art of swift and effective hazardous material spill response. Foster a culture of continuous improvement in safety protocols. Understand the importance of ongoing safety assessment and refinement. 🌟 Why Choose Our Course? Expert Instruction: Led by industry experts with extensive experience. Practical Learning: Hands-on exercises and real-life case studies. Customizable Training: Tailored to address specific challenges in water and sewer treatment plants. Compliance Assurance: Aligns with industry regulations and standards. Equip yourself and your team with the knowledge and skills needed to create a secure environment in water and sewer treatment plants. Enroll in our 'Water and Sewer Treatment Plant Safety Training' course today to elevate your safety standards and protect your most valuable assets - your employees. Safety is not just a priority; it's a commitment. Course Curriculum Module 1- Introduction to Safe Water and Chemical Safety in Water Introduction to Safe Water and Chemical Safety in Water 00:00 Module 2- Personal Protective Equipment and Lockout Procedures Personal Protective Equipment and Lockout Procedures 00:00 Module 3- Confined Space Safety and Chemical Handling Safety Confined Space Safety and Chemical Handling Safety 00:00 Module 4- Machine Safety and Working at Heights Machine Safety and Working at Heights 00:00 Module 5- Heat Stress Prevention and Emergency Preparedness Heat Stress Prevention and Emergency Preparedness 00:00 Module 6- Hazardous Material Spill Response and Continuous Improvement Hazardous Material Spill Response and Continuous Improvement 00:00

Employees in the construction sector who operate at heights need to understand the risks to their health and safety as well as their legal obligations. There are numerous risks associated with working at height, so it's critical to take the appropriate precautions in order to work carefully and safely. For people who are overseeing or working at height, there is a comprehensive training course called Working at Height. You will gain knowledge about HSE law, personal protective equipment, legal requirements for employers and employees, and much more. The most frequent reasons for falls from heights, how to recognize and assess health and safety hazards at work, and what to do in an emergency are all covered in this Working at Height course. You will also receive detailed instructions on construction safety, including how to carry out comprehensive risk assessments and put in place an efficient emergency rescue plan. Key Features: This Working at Height - Level 3 CPD UK Accredited Course Includes: This Working at Height Course is CPD Certified Free Certificate from Reed CIQ Approved Working at Height Course Developed by Specialist Lifetime Access This course on Working at Height is intended for employees, supervisors, and anyone else who conducts work near excavations or at an elevated height. It outlines all of the possible dangers associated with this kind of employment as well as the best ways to avoid any situations that can result in fatalities or serious injuries. After completing the Working at Height course, students will be equipped with the information and skills necessary to conduct risk assessments, utilize the proper equipment, and adhere to all UK legislation that are in place to protect people from the risks associated with working at heights. This material is organized into three thorough modules that don't require any prior knowledge to comprehend or finish. Course Curriculum: Working at Height - Level 3 CPD UK Accredited Module 1: Overview, Guidelines, and Responsibilities This lesson gives information on the most frequent occurrences that occur in the UK and explains what is meant by "Working at Height." We also examine the legal obligations that companies and employees have when it comes to this kind of labor, as well as the UK legislation (WAHR 2005) that control it. Module 02: Evaluation and Preventive Measures The complete process of applying risk assessment to planned work where height-related tasks must be completed is covered in Working at Height Module Two. It describes the various kinds of risks you can face and how to lessen the likelihood that someone would suffer harm. Module 3: Using Equipment to Work at Heights The course looks at the various kinds of equipment that a worker might need to employ when working at a height in Working at Height Module Three. This results in recommendations for the safest operation of equipment like scaffolding and MAWPs, as well as important inspection standards for equipment like podium stairs and step-ladders. Learning Outcomes Working at Height - Level 3 CPD UK Accredited: Understand regulations governing Working at Height, demonstrating legal compliance and accountability. Assess potential risks and apply preventive measures in various height-related scenarios. Identify and proficiently use appropriate equipment for safe work at elevated locations. Demonstrate responsibility by adhering to safety standards and workplace regulations. Evaluate working conditions and implement effective strategies to mitigate height-related hazards. Develop a comprehensive understanding of responsibilities related to working at heights. Certification After completing this Working at Height - Level 3 CPD UK Accredited course, you will get a free Certificate. Please note: The CPD approved course is owned by E-Learning Solutions Ltd and is distributed under license. CPD 10 CPD hours / points Accredited by The CPD Certification Service Working at Height - Level 3 CPD UK Accredited 51:46 1: Module 01: Overview, Regulations, and Responsibilities 16:07 2: Module 02: Evaluation and Prevention 18:59 3: Module 03: Equipment for Working at Heights 14:40 4: CPD Certificate - Free 01:00 5: Leave A Review 01:00 Who is this course for? This Working at Height - Level 3 CPD UK Accredited course is accessible to anyone eager to learn more about this topic. Through this course, you'll gain a solid understanding of Working at Height. Moreover, this course is ideal for: Construction workers Maintenance personnel Health and safety officers Supervisors in various industries Facilities management staff Requirements There are no requirements needed to enrol into this Working at Height - Level 3 CPD UK Accreditedcourse. We welcome individuals from all backgrounds and levels of experience to enrol into this Working at Height course. Career path After finishing this Working at Height course you will have multiple job opportunities waiting for you. Some of the the following Job sectors of Working at Heightare: Window cleaning: £37,000 - £40,000 per annum Construction worker: £27,000 - £28,000 per annum Firefighting: £25,000 - £27,000 per annum bricklaying: £21,000 - £37,000 per annum Roofing: £25,000 - £45,000 per annum Certificates Reed Courses Certificate of Completion Digital certificate - Included Will be downloadable when all lectures have been completed.

🌲 Tree Trimming Safety Online Training: Ensuring Your Safety from the Ground Up! 🌳   Welcome to the comprehensive 'Tree Trimming Safety Online Training' course, designed to equip you with the knowledge and skills needed to ensure a safe and efficient tree trimming operation. Our carefully curated modules cover a wide range of topics, providing valuable insights into the intricacies of tree trimming safety. Module 1: Introduction to Tree Trimming Safety and Conducting Risk Assessments Get started with a solid foundation in tree trimming safety. Learn to identify potential risks and hazards through effective risk assessments. This module sets the stage for a safety-conscious approach to tree trimming operations. Module 2: Personal Protective Equipment and Working at Heights in Tree Trimming Operations Discover the importance of personal protective equipment (PPE) and understand how to work safely at heights during tree trimming activities. Equip yourself with the knowledge to choose the right gear for a secure and injury-free work environment. Module 3: Proper Tree Pruning Techniques for Health and Safe Operation Master the art of tree pruning for both the health of the tree and the safety of the operator. Learn the best practices and techniques to ensure precision and safety throughout the pruning process. Module 4: Safe Handling and Storage of Fuel for Chainsaws and Electrical Safety Guidelines Safety extends to the tools used in tree trimming. Gain insights into the safe handling and storage of fuel for chainsaws, as well as crucial electrical safety guidelines to prevent accidents and ensure a secure working environment. Module 5: Emergency Preparedness and Continuous Safety Improvement in Tree Trimming Operations Be prepared for unforeseen circumstances. Understand the essentials of emergency preparedness and discover strategies for continuous safety improvement in tree trimming operations. Module 6: Assessment of Tree Trimming Safety, Certification, and Course Conclusion Evaluate your knowledge and skills through assessments that reinforce your understanding of tree trimming safety. Upon successful completion, receive a certification acknowledging your commitment to safety in tree trimming operations.   🚀 Why Choose Our Tree Trimming Safety Course? Comprehensive Content: Covering all aspects of tree trimming safety, from risk assessments to emergency preparedness. Flexible Learning: Access modules at your own pace, anytime, and from anywhere. Expert Guidance: Learn from industry experts with vast experience in tree trimming safety.   Ensure the safety of yourself and your team by enrolling in the 'Tree Trimming Safety Online Training' course today. Invest in knowledge that keeps you secure and operations running smoothly! 🌳🛡️ Course Curriculum Module 1- Introduction to Tree Trimming Safety Conducting Risk Assessments Introduction to Tree Trimming Safety Conducting Risk Assessments 00:00 Module 2- Personal Protective Equipment and Working at Heights in Tree Trimming Operations Personal Protective Equipment and Working at Heights in Tree Trimming Operations 00:00 Module 3- Proper Tree Pruning Techniques for Health and Safe Operation Proper Tree Pruning Techniques for Health and Safe Operation 00:00 Module 4- Safe Handling and Storage of Fuel for Chainsaws Electrical Safety Guidelines Safe Handling and Storage of Fuel for Chainsaws Electrical Safety Guidelines 00:00 Module 5- Emergency Preparedness and Continuous Safety Improvement in Tree Trimming Operations Emergency Preparedness and Continuous Safety Improvement in Tree Trimming Operations 00:00 Module 6- Assessment of Tree Trimming Safety Certification and Course Conclusion Assessment of Tree Trimming Safety Certification and Course Conclusion 00:00

Health & Safety: Working Safely at Height Training Diploma Elevate your Health & Safety expertise with our Working Safely at Height Training Diploma. Master ladder setups under Health & Safety guidelines. Ensure impeccable Health & Safety in elevated workspaces. Learning Outcomes: Select appropriate ladders considering Health & Safety. Verify ladder setups in line with Health & Safety protocols. Optimise ladder placement adhering to Health & Safety. Execute complete ladder safety under Health & Safety. Comprehend and apply Health & Safety in working at heights. More Benefits: LIFETIME access Device Compatibility Free Workplace Management Toolkit Key Modules from Health & Safety: Working Safely at Height Training Diploma: Identify Ladders for Health & Safety: Choose the correct type of ladders based on Health & Safety requirements. Ensure Ladder Setup in Health & Safety: Confirm the ladder setup follows stringent Health & Safety standards. Optimise Ladder Placement for Health & Safety: Optimise the ladder's position to ensure Health & Safety compliance. Complete Ladder Safety Training: Attain complete training in ladder safety, fortified by Health & Safety guidelines. Understand Health & Safety in Working at Heights: Comprehend the importance and protocols of Health & Safety when working at elevated positions. Implement Health & Safety in Fall Protection: Put into action fall protection measures that meet Health & Safety regulations.

This course is suitable for operatives required to Work at Height, and will give operatives a sound foundation on the requirements of the Work at Height Regulations 2005 and other relevant regulations. Also highlights the principles of how fall protection systems / equipment should be selected and used. This course will provide delegates with the knowledge and practical experience to enable them to work safely at height using a variety of basic systems and techniques. Book via our website @ ESS | Working at Height Module 2 - Safe Work at Height (General Operative) | Vp ESS (vp-ess.com) or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346