45358 RES courses

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in cake decorating. This course has been designed to be as affordable for families as possible and it is entirely possible to complete this qualification from a standard domestic kitchen. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the Level 2 Cake Decorating Information Pack.pdf We recently hosted an Open Day live which can be watch on replay here: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. UNIT SUMMARIES 601/3232/2/CAK Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in cookery. This course has been designed to be as affordable for families as possible and it is entirely possible to complete this qualification from a standard domestic kitchen. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the 2023 Level 2 Cookery Info Pack.pdf The following video explains in detail how the course works and what the course covers: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. *** PLEASE CLICK HERE TO BOOK *** UNIT SUMMARIES 601/3232/2/COO Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in textile craft. This course has been designed to be as affordable for families as possible but does rely on the use of a sewing machine. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the Level 2 Textiles Information Pack.pdf Our Open day event gives a little more insight into how the course works and the content covered: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. For further information or to ask any questions please feel free to reach out to us, in the assurance that you are speaking to another fellow home edder.Support can be found in our dedicated Facebook group where you will also have access to a free sample session within the file sectionLevel 2 Textiles Group *** PLEASE CLICK HERE TO BOOK *** UNIT SUMMARIES 601/3232/2/TEX Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

Highly effective 12-week course to overcome speaking nerves. It is the only course of its kind that works to dissolve the psychological symptoms that cause so much stress: Rapid heartbeat, difficult breathing, panic attacks, sweating, blushing.

Participants perform preliminary system sizing for mechanical and electrical power generation of 50-watt to 100-kilowatt capacities. This training combines class lectures with site tours and lab exercises. Hands-on exercises include: methods of flow measurement, determining head, analyzing and assembling small functioning systems. The class is taught by two highly experienced Micro-hydro installers/instructors. Topics Include: • Learn safety procedures working with electricity • Understand fundamental water hydraulics and hydrostatic pressures. Understand the difference between static and dynamic heads. • Understand the various components of hydroelectric systems • Identify the two major hydro turbine groups (reaction and impulse turbines) • Learn the differences between AC and DC Systems • Develop site analysis skills for measuring water flow and elevation difference (head) • Review 6 different plan examples of hydroelectric system designs • Learn battery design and energy storage techniques • Understand controls for balancing energy production with energy loads • Summarize troubleshooting procedures and resources • Develop maintenance requirements both short and long term • Learn integration techniques for hybrid solar, wind and hydroelectric systems • Review 4 case studies using different turbine types • Learn legal requirements for hydroelectric systems including FERC permits, water rights and stream alteration.

Autoskool Driving School offers you a very competitive rate of Automatic driving lessons with a quality service to match. We also offer you a simple price structure, we don’t believe in charging you extra during the evening or the weekend. Our lessons are conducted on a 1-1 basis and we will give you a full two hour lesson. We accept payment via PayPal, credit card over the phone or you can pay cash to the instructor on the day of your lesson.

relaxation meditation restorative yoga mindfulness the nest

Are you looking to pursue a career in teaching or education? Do you want to enhance your skills and knowledge in this field and make yourself more employable? If so, the ATHE Level 3 Award in Education and Training (AET), formerly known as PTLLS, is the perfect course for you. Regulated by Ofqual, the AET is a highly respected qualification that provides an excellent introduction to teaching and training. This course is designed to equip you with the skills and knowledge you need to become a confident and effective teacher or trainer in any setting. The AET course covers a wide range of topics, including the roles, responsibilities and boundaries of a teacher or trainer, planning and delivering inclusive teaching and learning, assessment and evaluation, and the use of resources and technology in teaching. You will also learn about the different learning styles and needs of your learners and how to adapt your teaching to meet these needs. In addition to the AET course, this bundle also includes five CPD accredited courses that will further enhance your knowledge and skills in the field of health and social care. This bundle offers an excellent opportunity for anyone looking to pursue a career in teaching or education, as well as those already working in the field who want to enhance their skills and knowledge. With the AET qualification and five CPD accredited courses, you will have a comprehensive understanding of teaching and education, as well as specialised knowledge in education and training. Enrol now and take the first step towards your career goals! The regulated qualification package includes the following: Qualification Specification Support Materials 24/7 access to the Course Library Assessment Guidance Tutor Support On-Demand Customer Service Assignment, Observation, and Report Templates. These additional benefits ensure that you have all the necessary resources and support to complete your qualification. The qualification number for the ATHE Level 3 Award in Education and Training - AET (Formerly PTLLS) is 601/8383/X. The total credit value offered by this qualification is 12 credits. The normal age range for this qualification's learners is 19 and above. By enrolling, learners will also be able to develop study skills like critical thinking, planning, organising, research, analysis, reflection and IT skills. Individual learners will be able to identify their strengths while improving areas that need more attention. Learning Outcome for the CPD Course Bundle: Understand the roles, responsibilities and boundaries of a teacher or trainer in various educational settings, including early years, primary and special educational needs (SEN) settings. Plan and deliver inclusive teaching and learning sessions that meet the needs of a diverse range of learners, including those with communication and sensory needs. Apply different teaching techniques and strategies, including play-based learning and phonics teaching, to engage and support learners of all ages and abilities. Demonstrate effective behaviour management strategies and techniques in the classroom, including techniques for supporting learners with challenging behaviour and SEN. Evaluate the effectiveness of their teaching and learning sessions, using a range of assessment techniques and tools to monitor learner progress and adapt teaching approaches as needed. Understand the principles of child development and the Early Years Foundation Stage (EYFS) framework, and how these can be applied in early years settings to promote positive learning outcomes for young children. Communicate effectively with learners, colleagues and other stakeholders in educational settings, including parents and carers, to promote positive relationships and effective collaboration. Curriculum Breakdown of ATHE Level 3 Award in Education and Training Unit 01: Understanding Roles, Responsibilities and Relationships in Education and Training Self-Assessment Grid Unit 02: Understanding and Using Inclusive Teaching and Learning Approaches in Education and Training Unit 05: Understanding Assessment in Education and Training Guided Learning Hours(GLH) - 73 Total Qualification Time(TQT) - 120 Further Progression for ATHE Level 3 Award in Education and Training: Upon successfully completing a Level 3 qualification in Education and Teaching, learners have several progression opportunities available. They may choose to advance to: The Level 4 Certificate in Education and Training The Level 4 Award in Understanding the Internal Quality Assurance of Assessment Processes and Practice Other related education and training qualifications CPD Courses in this bundle are: EYFS Teaching Diploma Teaching Assistant Primary Teacher Phonics Teaching Diploma SEN Teaching Assistant This comprehensive course bundle covers a range of topics and skills relevant to anyone interested in pursuing a career in education or looking to enhance their existing skills in this field. The bundle includes courses in EYFS Teaching Diploma, Teaching Assistant, Primary Teacher, Phonics Teaching Diploma and SEN Teaching Assistant. Topics covered include the roles and responsibilities of a teacher or trainer, inclusive teaching and learning, behaviour management, assessment and evaluation, child development and the Early Years Foundation Stage (EYFS) framework, phonics theory and techniques, and supporting learners with special educational needs (SEN), communication and sensory needs. Upon completion of this course bundle, learners will have developed a range of practical skills and specialised knowledge that will enhance their employability and career prospects in the field of education. Assessment For the ATHE Level 3 Award in Education and Training - AET (Formerly PTLLS), learners will have to prepare written assignments for knowledge-based units and show practical demonstrations or submit observation reports for Competence/Skill-Based units. All evidence will be initially assessed by a qualified assessor and further assessed by an Internal Quality Assurer (IQA) to ensure that all the learning outcomes of the qualification are properly accomplished by the learner. At the end of each CPD-accredited course in this bundle, there are quizzes and assignments which will test the learner's knowledge and help them to remember the most important information. After completion, a learner can order either a PDF or Hard-copy Certificate for a predetermined price for every course. Certification After completing the assessment, learners will receive a prestigious ATHE certificate that has been approved by The Office of Qualifications and Examinations Regulation (Ofqual). This certificate holds a Level 3 status in the Regulated Qualifications Framework (RQF). This is an impressive achievement that hiring managers hold in high regard, and they actively seek candidates who possess RQF qualifications on their resumes. So, not only will you gain valuable knowledge and skills in education and training, but you'll also boost your employability with a sought-after certification! Requirements Entry Requirements for ATHE Level 3 Award in Education and Training: For learners who have recently engaged in education or training, the entry profile typically consists of one of the following: You must be over the age of 18 5 or more GCSEs at grades C and above Other equivalent international qualifications You must also have an appropriate standard of English, Maths and IT For whom English is not their first language, IELTS 5.5 or an approved equivalent is recommended

This 4 hour course outlines a range of knowledge and practical skills in providing basic life support (BLS) and using an automated external defibrillator (AED) safely. Learners will practise assessing and managing a casualty who needs BLS and the safe use of an AED. Our course outlines a range of knowledge and practical skills in providing basic life support (BLS) and using an automated external defibrillator (AED) safely. Learners will practise assessing and managing a casualty who needs BLS and the safe use of an AED. For more information click on the tabs below, or get in touch, we’d be more than happy to answer any queries. At Immerse Training we pride ourselves on offering First Aid and Pre-Hospital Care Training that meets your specific needs. All our courses meet the requirements of the relevant awarding body. On top of that, we are more than happy to create bespoke elements that tailor each programme to suit your first aid or care responsibilities. Qualification Information This qualification and learning outcomes are based on the recommendations of: The Resuscitation Council (UK) Skills for Health Assessment Principles for First Aid Qualifications Course Content Following this course students will: Be able to manage an unresponsive casualty who is breathing normally. Be able to manage an unresponsive casualty who is not breathing normally. Know how to safely use an automated external defibrillator. Be able to safely use an automated external defibrillator. Who should attend? This qualification is for people who have a specific interest or responsibility at work, or in voluntary and community activities, in being able to provide BLS when dealing with an emergency situation which may involve using an AED. Pre-requisites Students must be at least 16 years old on the first day of training. Assessment and Certifications Assessment for this course is continuous. Successful students will receive an Immerse Training Certificate, which is valid for one year. This certificate will be issued by Qualsafe, the awarding body for Immerse Training. Additional Information Completion of the Level 2 Award in Basic Life Support and Safe Use of an Automated External Defibrillator includes 1 credit at Level 2 of the Qualification Credit Framework (QCF). The Level 2 Award in Basic Life Support and Safe Use of an automated External Defibrillator is also recommended as an annual refresher for student who have successfully completed the QA Level 3 Award in First Aid at Work (QCF). Workplace First Aid Courses First Aid courses for employers and employees. Our workplace courses are fully accredited, registered and meet Health and Safety Executive (HSE) guidelines. From 1 day Emergency First Aid at Work (previously appointed person) to 3 day First Aid at Work courses. We specialise in on-site courses at your workplace, tailored to the specific risks associated with your business.  All courses can be delivered at our training centre in Poole, Dorset or we can deliver on-site across Bournemouth, Poole, Dorset, Hampshire and the South of England.

Why Choose AutoCAD Electrical Training Course | Bespoke? Course Link Master electrical drawings, schematics, and layouts. Utilize symbol libraries and automated circuit design. Access recorded lessons and lifetime email support.  "Say goodbye to group classes and hello to 1-on-1 Courses. Dial 02077202581 or WhatsApp 07970325184 to reserve your dates. Duration: 16 hrs. Method: 1-on-1, Personalized attention. Schedule: Tailor your own hours of your choice, available from Mon to Sat between 9 am and 7 pm. AutoCAD Electrical Training Course: Specialized electrical CAD design skills with precision. Streamlined workflows for efficient design. Consistent adherence to industry standards. Increased productivity in electrical design. Enhanced collaboration with other professionals. Access to recorded lessons for review. Lifetime email support for ongoing assistance. Learn AutoCAD for electrical design. Enroll now and create accurate and professional electrical drawings with confidence. Choose in-person or live online sessions. AutoCAD Electrical Training Course: Specialized electrical CAD design skills with precision. Streamlined workflows for efficient design. Consistent adherence to industry standards. Increased productivity in electrical design. Enhanced collaboration with other professionals. Access to recorded lessons for review. Lifetime email support for ongoing assistance. Learn AutoCAD for electrical design. Enroll now and create accurate and professional electrical drawings with confidence. Choose in-person or live online sessions. AutoCAD Electrical Course Content: Introduction to AutoCAD Electrical Software: Overview and features of AutoCAD Electrical Understanding the software interface and tools Project file structure and management Layout and Navigation: Navigating the AutoCAD Electrical workspace Creating new project files and using attribute editors Understanding WDD, WDX, and WDF project files Exploring the Project Manager interface and attribute editors Electrical Diagram Drawing: Numbering and titling wires in diagrams Labelling components Utilizing diagram symbol libraries Creating and editing Electrical Control Circuits (ECC) Component dialog box and Circuit Scale dialog box Introduction to Programmable Logic Controllers (PLCs) and Integrated Systems: PLC Symbols and Concepts Inserting Programmable Logic Controllers (PLCs) into diagrams Adding PLC Units to diagrams Working with PLC Input and Output points and circuits Understanding PLC-based classification Using the Spreadsheet to PLC Input and Output Points utility Custom and Bespoke Symbols: Creating custom symbols for Switches, Wires, Contactors, Motors, Transformers, etc. Specifying symbol conventions and standards Offline and online usage of AutoCAD Electrical databases Drawing for Terminals and Plans: Implementing Terminal symbols in diagrams Handling terminal plans and locations Working with compound level terminals and locations Utilizing the Component command for single and multiple components Managing Jumpers and wiring Modifying Terminal Strips and Dual In-Line Packages (DIP) Understanding DIN Rail, Electrical Enclosure, Circuit Breakers, and Electrical Equipment Generating PDFs and Reports: Exporting drawings to PDF format Organizing report templates Automating the generation of reports Creating Electrical Audit Reports This AutoCAD Electrical course provides comprehensive knowledge of the software, focusing on electrical diagram drawing, symbol creation, PLC integration, terminal planning, and report generation. Participants will gain the skills needed to efficiently design electrical systems using AutoCAD Electrical software. Upon completing the AutoCAD Electrical course, participants will master the intricacies of the software. They will adeptly create accurate electrical diagrams, seamlessly integrate PLCs, design personalized symbols, strategize terminal layouts, and produce reports with precision and efficiency. Armed with these skills, graduates will possess the expertise to confidently design complex electrical systems. This proficiency opens avenues in various job roles such as Electrical Design Engineer, CAD Technician, Control Systems Designer, or even Project Manager in industries like manufacturing, automation, and engineering consultancy.