7056 Courses in Sheffield delivered Live Online

What does this course cover? This five-day course covers a range of topics, all of which are covered via a mixture of theoretical and practical training – we aim for our courses to be as hands-on as possible. The course specifically covers: An introduction to SCADA systems, covering elements, servers, hardware and software, graphics, and more. A range of systems including automatic control, FIELDBUS, and wireless communication systems. An introduction to serial interfaces, ethernet networks, fibre optic, and wireless. Communications, including case studies to establish communication with PLCs. Process variables. Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), sensors, and alarms. Introduction to OPC (open plan communications) How to configure OPC UA servers and how to program an OPC UA client Client and server development Connection management Security configuration Trends and historical data System components This course covers a wide range of industry-recognised manufacturers, including Siemens, Allen Bradley, Wago and Mitsubishi.) What will I gain from this course? Upon successful completion of this course, candidates will gain a City & Guilds certification in SCADA and PLC Communications.

Who is this Level 3 NVQ aimed at? The experienced worker qualification is for practising electricians with at least 5 years experience but have never formally completed an industry apprenticeship or equivalent Level 3 NVQ Qualification. This is suitable for self-employed and employed electricians. This is the Level 3 pathway for practising electricians to obtain your ECS Gold Card and JIB Grading. To complete the full qualification you will also need to: Have completed an AM2e Assessment Have a current Wiring Regulations Qualification BS7671 Have an initial verification qualification such as a C&G 2391-50 What’s involved in the qualification? After an initial Skills Scan, we will discuss the gaps that need to be filled and you will be assessed using a range of methods to complete the evidence gathering process.There will also be Professional Discussions to discuss areas of expertise and you can choose either an installation or maintenance route based on the work you carry out.There are seven Performance Units to be assessed for the qualification, these are: Apply Practices and Procedures for Maintenance Apply Health, Safety and Environmental Considerations Organise and Oversee the Electrical Work Environment Apply Design and Installation Practices and Procedures Terminate and Connect Conductors Inspect, Test and Commission Electrical Systems Apply Fault Diagnosis and Rectification On completion of the Experienced Worker assessment you will be able to use the qualification to apply for a JIB Gold Card. This qualification is for experienced electricians who can demonstrate over 5 years experience.It is not suitable for new entrants or those currently on an apprenticeship.

Virtual Classroom – Our hi tec virtual learning suite enables you as the trainee to experience exactly the same course and level of interaction with a trainer as though you were in the same room as them. This isn’t a slideshow-based course, it’s a real tutor, in a real room taking you through all you need to know to be successful in your City and Guilds 2391 – 52. Utilising equipment and software, the theoretical part of the course will be taught over 3 days via the internet. During this time, you will be taught the theory-based elements below, also allowing ample time for questions face to face with the tutor. The instructor will go through everything that you will be expected to know about Inspection and Testing on both new and existing installations. You will be given access to our dedicated online portal to work through sample questions in your own time until the information becomes second nature to you. Your only hardware prerequisite for this part of the course is access to the internet, whether it be on a computer or a smart device. The second stage of the course will involve you attending one of our numerous training centres around the UK, for both the practical training and the examinations over a 2.5 day period. This will be booked for a later date and one of our team will be in touch with you to arrange this. During your time at one of our centres you will be taught the inspection and testing practical elements you require on individual training rigs, with equipment and testers for each and every individual person. (Our centres are ALL Covid secure and the training bays, etc are all socially distanced). This City & Guilds qualification is aimed at practicing electricians who have not carried out inspection and testing since qualifying or who require some update of training. This qualification helps you to develop the knowledge and practical skills required to professionally install and carry out initial verification and periodic inspection and testing on electrical installations. It is expected that suitable candidates have a basic knowledge and understanding of electrical science and principles and experience of electrical installation work. This is an essential skill for any electrical installer.

Who is this gas engineer training course aimed at? This gas engineer course is aimed at beginners who would like to enter the gas industry and begin a career as a gas installer. It has been specifically designed for those with no previous experience or limited experience within the gas industry or who have relevant mechanical, engineering, or construction qualifications or experience. If you already have experience in a related trade (e.g., plumbing) our Managed Learning Programme for experienced trades may be a better fit for you. What is the managed learning programme? This is a package course that has been developed by Logic Certification Limited (LCL) and is recognised by the gas industry’s Standard Setting Body (SSB.) It is a route for new entrants to learn, develop and build a portfolio within the gas industry. Once this MLP is completed, candidates can then move on to the new entrant ACS assessment, allowing them to be on the Gas Safe Register

C&G 2377-77 PAT 1 Day

Water Regulations Advisory Scheme (WRAS) Training Day

Who is the course aimed at? This course is designed for both engineers with experience, and also for new entrants from a non-engineering background who want to pursue a new career as a Service Engineer. For those without an engineering background, it is recommended that you have a minimum grade C at GSCE Maths. Click here for more information

What is the managed learning programme? This is a package course that has been developed by Logic Certification Limited (LCL) and is recognised by the gas industry’s Standard Setting Body (SSB.) It is a route for experienced trades to learn, develop and build a portfolio within the gas industry. Once this MLP is completed, candidates can then move on to the new entrant ACS assessment, allowing them to be on the Gas Safe Registration. Course Duration: 8 weeks (plus the time taken to complete portfolio) Pre-Requisites Candidates must know how to install hot and cold-water pipework and fittings competently and have 2 years experience in a related trade and/or a recognised qualification. What is gained from this gas course? Upon completion of the MLP, candidates will receive a competence certificate for the range of technique elements, they will also receive an industry recognised MLP training certificate for Logic Certification. Once the MLP is successfully completed, candidates can take the ACS assessment – we can add the ACS assessment to this course for a discounted fee.

This ACS renewal reassessment gas safe course is for existing gas engineers who have previously passed the ACS assessment and need to renew their qualifications and certification. This qualification needs renewing every five years for gas engineers to continue working safely, legally, and to remain on the gas safe register. To be eligible for this course, candidates must ACS qualifications must have expired within the last 12 months or be due to expire in the next 6 months – if it has been over 12 months, the new entrant’s assessment must be taken. This ACS renewal reassessment course is ideal for category 1 gas engineers who predominately work with boilers & appliance’s including CCN1, CPA1, CENWAT, HTR1, and CKR1. Your training & assessment will be easier to determine if you have been regularly undertaking the areas of gas work covered by your existing certification. Reassessment ACS is a mixture of assessing both your practical skills and theory knowledge and covers all updates since you last took the qualification. What does this cover? The core domestic gas safety course (CCN1) plus appliances, includes training and re-assessment on CCN1 CENWAT (Central Heating Boilers and Water Heaters) CKR1 (Cookers) HTR1 (Space heaters, including gas fires and wall heaters.) MET1: Meters There’s also the opportunity to cover the below for an extra fee if required: Water Regulations Advisory Scheme (WRAS) Unvented Hot Water Heating The assessment is a mixture of practical and theory, testing candidates skills and knowledge. Our aim is to make your ACS reassessment informative to make the most of your time off the “tools”. Our facilities have a superb range of boilers & appliances along with staff with both years of both practical & training knowledge enabling you to take real value from your training & assessment.

This is a two day City and Guilds 7543 training course with a practical and oral exam. Candidates will be provided with course study notes. Who are the qualifications for? The City and Guilds 7543 qualification is for those who are already practising in the industry, or for those whose aim is to enter the industry and for those wanting to gain a certificate for their own personal skills development. This City and Guilds 7543 course is arranged in the following sections: Legislative and organisational requirements and procedures Operating principles and functional requirements including environmental and legal requirements Health & Safety/environmental requirements Environmental issues Legislation and regulations Use and application of special purpose tools, equipment and materials needed for system recovery Identification, recovery and charging Leak detection Disposal, recycling or destruction of waste