4450 Operations courses

The IMI Award in MOT Test Centre Management, has been developed with the Driver and Vehicle Standards Agency (DVSA) to provide learners with the qualification, knowledge and skills necessary to manage MOT Vehicle Test Centres. What you will achieve Successful completion will give you a valuable academic qualification recognised by the DVSA that demonstrates your skill and knowledge necessary to successfully run and manage an MOT station on a day to day basis as well as fully understanding the DVSA’s legislative and compliance requirements. Cost of Course The cost of this course is £544.50 + VAT per candidate. Please contact us for further information. Course Overview The MOT Test Centre Manager Training course and assessment is normally ran over 2 1/2 days in total with the 1/2 day revision and online test often ran a few days after the initial training to allow candidates time to absorb the information. The main focus of the courses will teach you how to: manage the legislative and compliance knowledge required to manage an MOT test centre effectively encourage improvements in customer service develop and supervise staff with an MOT centre understand the MOT test centre quality systems and audits Assessment is by an open book online IMI test. Who Should Attend The MOT Test Centre Manager Training qualification is primarily developed for learners who wish to run an MOT Vehicle Test Station (VTS), or who will have direct responsibility for MOT operations at the VTS in the future. There are no formal entry qualifications for this course but learners MUST possess a good standard of written and spoken English as all MOT manuals, training and testing is conducted in English.

Transport is the lifeblood of the economy. It moves goods and people around, and it is essential for businesses to operate efficiently. Aspiring transport managers can now acquire the scientific information and skills they need to succeed in this in-demand field. This transport manager Training bundle course covers all the essential topics, from transportation management systems to health and safety. Learning outcomes of Transport Manager Training Bundle: Gain a comprehensive understanding of Transport Manager career Learn how to use transport management systems Develop a transportation management strategy Understand road freight transport laws and permits Master rail and transport management Become proficient Transport Manager for ports and inland waters Acquire expertise in transport management for airlines Stay up-to-date on trends, challenges, and best practices in transport management Understand the importance of transport management and health and safety This Transport Manager Training Bundle Consists of the following Premium courses: Course 01: Transport Manager Course Course 02: Import/Export Processing Course 03: Logistic Management Course 04: Supply Chain Management Course 05: Operations Management Course 06: Purchasing & Procurement Course - Level 3 Course 07: Warehouse Course 08: Vehicle Routing Problem with Spreadsheet Course 09: Diploma in Lean Process and Six Sigma Course 10: Spill Management Training Course 11: Driver Safety Awareness Certificate Course 12: Car Mechanic and Repair Training Course 13: Effective Communication Skills Diploma Course 14: Emergency First Aid and Incident Management at Work Enrol in this Transport Manager Training Bundle today and take your career to the next level! This Transport Manager Training bundle course is a comprehensive program that provides students with the knowledge and skills they need to succeed in the transport management field. This Transport Manager Training bundle course covers a wide range of topics, including transportation management systems, transportation management strategy, road freight transport laws and permits, rail and transport management, transport management for ports and inland waters, transport management for airlines, trends, challenges, and best practices in transport management, and transport management and health and safety. The Curriculum of Transport Manager Training Bundle Course 01: Transport Manager Course Module 01: Introduction to Transport Management Module 02: Transport Management Systems (TMS) Module 03: Transportation Management Strategy Module 04: Road Freight Transport Laws and Permits Module 05: Rail and Transport Management Module 06: Transport Management for Ports and Inland Waters Module 07: Transport Management for Airlines Module 08: Trends, Challenges and Best Practices in Transport Management Module 09: Transport Management and Health and Safety =========>>>>> And 13 More Transport Manager related Courses <<<<<========= How will I get my Certificate of Transport Manager Training Bundle? After successfully completing this Transport Manager Training bundle course you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement. PDF Certificate: Free (For The Title Course) Hard Copy Certificate: Free (For The Title Course) Enrol in the Transport Manager Training bundle course today and start your journey to a successful career in transport management! CPD 140 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Transport Manager Training Bundle Students who are interested in a career in transport management Working professionals who want to advance their careers in transport management Entrepreneurs who want to start their own transport businesses Requirements Our Transport Manager Training bundle course is fully compatible with PCs, Macs, laptops, tablets and Smartphone devices. Career path Having this Transport Manager Training bundle course will increase the value of your CV and open you up to multiple job sectors. Transport manager: £30,000 - £60,000 Fleet manager: £35,000 - £70,000 Logistics manager: £40,000 - £80,000 Supply chain manager: £45,000 - £90,000 Operations manager: £50,000 - £100,000 Safety manager: £55,000 - £110,000 Compliance manager: £60,000 - £120,000 Certificates Certificate of completion Digital certificate - Included You will get the PDF Certificate for the title course (Transport Manager Course) absolutely Free! Certificate of completion Hard copy certificate - Included You will get the Hard Copy certificate for the title course (Transport Manager Course) absolutely Free! Other Hard Copy certificates are available for £10 each. Please Note: The delivery charge inside the UK is £3.99, and the international students must pay a £9.99 shipping cost.

Overview 🚧 Unlock a Safe and Thriving Work Environment with Our Occupational Health and Safety Course! 🚀 Are you ready to elevate your career to new heights while ensuring the safety and well-being of your colleagues and workplace? Look no further! Our comprehensive Occupational Health and Safety Course is your ticket to mastering the essential skills and knowledge needed to create a secure and healthy work environment. ️ Why Occupational Health and Safety Matters ️ In today's fast-paced and dynamic work environments, prioritizing occupational health and safety isn't just a legal obligation-it's a moral imperative. Businesses that neglect safety protocols risk facing severe consequences, including legal liabilities, financial losses, and, most importantly, harm to employees. By investing in proper training, individuals and organizations can mitigate risks, prevent accidents, and foster a culture of safety and well-being.   📚 What You'll Gain from Our Course 📚   📣 Frequently Asked Questions (FAQs) 📣 Q: What is Occupational Health and Safety (OHS)? A: Occupational Health and Safety (OHS) refers to the practice of ensuring the health, safety, and welfare of individuals engaged in work or employment. It involves identifying and addressing workplace hazards, implementing safety measures, and complying with relevant regulations to prevent accidents, injuries, and illnesses. Q: Why is Occupational Health and Safety important? A: Occupational Health and Safety is important for several reasons. Firstly, it helps protect the physical and mental well-being of employees, reducing the risk of work-related injuries and illnesses. Secondly, it enhances productivity and efficiency by creating a safe and conducive work environment. Lastly, it ensures compliance with legal requirements and helps organizations avoid costly penalties and liabilities associated with workplace accidents. Q: Who should take an Occupational Health and Safety course? A: Occupational Health and Safety courses are suitable for a wide range of professionals across industries, including safety officers, human resources managers, facility managers, operations supervisors, health and safety consultants, and small business owners. Anyone responsible for workplace safety or seeking to establish a career in occupational health and safety can benefit from such training. Q: What will I learn in an Occupational Health and Safety course? A: In an Occupational Health and Safety course, you will learn essential concepts, regulations, and best practices related to workplace safety. Topics typically covered include hazard identification, risk assessment, safety legislation, emergency response procedures, safety management systems, and workplace ergonomics. Q: How will completing an Occupational Health and Safety course benefit my career? A: Completing an Occupational Health and Safety course can benefit your career in several ways. It enhances your knowledge and skills in safety management, making you a valuable asset to employers. It also increases your employability and opens up opportunities for advancement in roles such as safety manager, occupational health specialist, compliance officer, and risk analyst. Q: Is certification required to work in Occupational Health and Safety? A: While certification is not always mandatory, it is highly recommended for professionals working in Occupational Health and Safety. Certification demonstrates your competence and commitment to workplace safety, increasing your credibility and marketability in the field. Many employers prefer to hire certified individuals for roles involving safety management and compliance. 📣 Frequently Asked Questions (FAQs) 📣 Q: What is Occupational Health and Safety (OHS)? A: Occupational Health and Safety (OHS) refers to the practice of ensuring the health, safety, and welfare of individuals engaged in work or employment. It involves identifying and addressing workplace hazards, implementing safety measures, and complying with relevant regulations to prevent accidents, injuries, and illnesses. Q: Why is Occupational Health and Safety important? A: Occupational Health and Safety is important for several reasons. Firstly, it helps protect the physical and mental well-being of employees, reducing the risk of work-related injuries and illnesses. Secondly, it enhances productivity and efficiency by creating a safe and conducive work environment. Lastly, it ensures compliance with legal requirements and helps organizations avoid costly penalties and liabilities associated with workplace accidents. Q: Who should take an Occupational Health and Safety course? A: Occupational Health and Safety courses are suitable for a wide range of professionals across industries, including safety officers, human resources managers, facility managers, operations supervisors, health and safety consultants, and small business owners. Anyone responsible for workplace safety or seeking to establish a career in occupational health and safety can benefit from such training. Q: What will I learn in an Occupational Health and Safety course? A: In an Occupational Health and Safety course, you will learn essential concepts, regulations, and best practices related to workplace safety. Topics typically covered include hazard identification, risk assessment, safety legislation, emergency response procedures, safety management systems, and workplace ergonomics. Q: How will completing an Occupational Health and Safety course benefit my career? A: Completing an Occupational Health and Safety course can benefit your career in several ways. It enhances your knowledge and skills in safety management, making you a valuable asset to employers. It also increases your employability and opens up opportunities for advancement in roles such as safety manager, occupational health specialist, compliance officer, and risk analyst. Q: Is certification required to work in Occupational Health and Safety? A: While certification is not always mandatory, it is highly recommended for professionals working in Occupational Health and Safety. Certification demonstrates your competence and commitment to workplace safety, increasing your credibility and marketability in the field. Many employers prefer to hire certified individuals for roles involving safety management and compliance. Course Curriculum Module 01 What is Construction Management Module 01 What is Construction Management 00:00 Module 02 Construction Operations and Job Site Management Module 02 Construction Operations and Job Site Management 00:00 Module 03 Project Performance, Quality _ Safety Module 03 Project Performance, Quality _ Safety 00:00 Module 04 Health and Safety Management Module 04 Health and Safety Management 00:00 Module 05 Engineering Safety Module 05 Engineering Safety 00:00 Module 06 Fire and Electrical Safety Module 06 Fire and Electrical Safety 00:00 Module 07 Occupational Health and Personal Protective Equipment Module 07 Occupational Health and Personal Protective Equipment 00:00

About this Training Course In our pursuit to discover oil & gas in deeper horizons, wells are often drilled in a HPHT environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi (69 MPa) and 300° F (150° C). To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives. This is particularly important when speciality services such as Managed Pressure Drilling (MPD) are being applied with crews and/or supervisors who are not intricately familiar with complicated well control incidents. As we seek to prevent costly non-productive time, attention will also be paid to enabling technologies like expandable solid tubulars, mud coolers and specialty mud. The 3 full-day course will explain the key characteristics and challenges of HPHT Planning and Well Control. This includes: Differences between HPHT and standard (conventional) wells and what this entails for well design. The challenges unique to HPHT and the impact of Pore Pressure Prediction (PPP). Static and Dynamic Equivalent Mud Density and the factors that influence the ultimate Bottom Hole Pressure (BHP). Control practices such as 'fingerprinting' to identify what's happening downhole. HPHT shut-in procedures and practices. Specific HPHT equipment and drilling tool requirements and advantages of Managed Pressure Drilling (MPD). Well control on/off bottom, bull-heading and dealing with kick-loss situations. Mud management, tolerance on mud properties and challenges in cementing. Case history on emergency control. Drills, team effort, checklists, human factor and 'getting everybody on board'. Training Objectives By the end of this course, participants will be able to: Recognize the main differences in planning/design between HPHT and standard (conventional) wells as well as the challenges that will have to be faced. Explain drilling and tripping operational challenges and practices as well as how to manage these effectively. Identify wellbore breathing (a.k.a. ballooning) and how to safely deal with this within the narrow window for mud density selection. Apply practices of consistent fingerprinting and how to develop procedures for this to benefit the rig team. Measure and understand bottom hole pressure and the effect of influencing factors such as temperature, rotation and flow rate. Understand the critical mud properties to alleviate barite sag, general mud density control techniques and specify the essentials in cementing. Manage losses and low fracture gradients with well bore strengthening methods. Execute sound HPHT shut-in procedures. Understand how MPD can assist in the safe and efficient drilling and hole cleaning of HPHT wells. Understand the use of MPD Influx Management Envelopes. Identify critical Early Kick Detection Systems (EKDS) and HPHT well control equipment. Execute safe secondary well control practices in a H2S environment, bull-heading, on and off bottom and handling of gas at surface, using MGS and hydrate mitigation measures. Target Audience The course is intended for: Office-based staff engaged in HPHT well planning and day-to-day operations Field-based rig staff working as front-line supervisors - from Assistant Drillers to Senior Toolpushers Field-based rig staff working for service companies supporting the execution of HPHT wells (MPD, mud and mudlogging services etc.) Trainer Your expert course leader has over 45 years of experience in the Oil & Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil & gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of 'doing-the-basics' are still reaped today when standing in front of a class. After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company's learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again. After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Duration 5 Days 30 CPD hours This course is intended for DevelopersConsultants Overview Explore SAP Gateway architecture and deployment optionsPerform OData queries and operations with SAP GatewayDefine data model and implement CRUD operationsExtend SAP Gateway services and build new ones with CDS ViewsConfigure routing, multiple origin, and SAP Workflow supportImplement advanced OData operations and introduce OData V4Handle security and consume OData services using SAP Web IDE Students will explore SAP Gateway architecture and deployment options. SAP Gateway Overview SAP Gateway Architecture SAP Gateway Deployment Options OData Overview OData and REST OData Operations OData Queries Consuming OData using SAP Web IDE SAP Gateway Service Implementation Defining a Data Model Implementing Read Operations Implementing Navigation Implementing Query Options Implementing Change Operations SAP Gateway Service Generation RFC/BOR Generator Search Help Generator SAP Gateway Service Redefinition Redefining a Data Service Redefining a Gateway Service SAP Gateway and CDS Views SAP Fiori Programming Model CDS/SADL Generator Data Source Reference CDS View Annotations SAP Gateway Hub Functionalities Multiple Back-End Systems Support Configuring Routing Capabilities Multiple Origin Composition SAP Workflow Support Advanced OData Options Implementing Function Imports Implementing Expand Operations Implementing Deep Insert Operations Handling ETags Batch Requests Media Links Offline Support Server Side Caching SAP Gateway Security Authentication Data Security SAP Gateway OData V4 Support OData V4 Implementation OData V4 Publishing

About the course “Quantum Computing for Finance” is an emerging multidisciplinary field of quantum physics, finance, mathematics, and computer science, in which quantum computations are applied to solve complex problems. “Quantum Algorithms for Computational Finance” is an advanced course in the emerging field of quantum computing for finance. This technical course will develop an understanding in quantum algorithms for its implementation on quantum computers. Through this course, you will learn the basics of various quantum algorithms including: Grover’s and Rudolf’s algorithm, Quantum amplitude Estimation (QAE) algorithm envisioned as a quadratic speed-up over Classical Monte-Carlo simulations, Combinatorial optimization algorithms namely Quantum Approximate Optimization Algorithm (QAOA), and Variational Quantum Eigensolver (VQE), and Quantum-inspired optimization algorithms – Simulated Coherent Ising Machine (Sim-CIM), and Simulated Bifurcation Algorithm (SBA). This course is meant for all those learners who want to explore the long-term employability of quantum computing in finance, assuming that you are familiar with the concepts of quantitative and computational finance. In addition, the course contains several Python based programming exercises for learners to practice the algorithms explained throughout the course. This course is the second part of the specialised educational series: “Quantum Computing for Finance”. What Skills you will learn Ability to perform quantum arithmetic operations and simulations. An understanding of the Quantum Amplitude Estimation algorithm and its variants. The computational and modelling techniques for option pricing and portfolio optimization on a quantum computer. The skills for a career in quantum finance including Quantum Algorithmic Research, Quantitative Asset Management and Trading, financial engineering, and risk management, using quantum computing technology. Course Prerequisites All potential learners must have prior knowledge or familiarity with basic quantum algorithms/basic quantum programming. Before enrolling this course, we recommend all learners to complete the first course “Introduction to Quantitative and Computational Finance” of the series “Quantum Computing for Finance”, if they have no previous experience with the concepts of quantitative and computational finance. Duration The estimated duration to complete this course is approximately 6 weeks (~4hrs/week). Course assessment To complete the course and earn the certification, you must pass all the quizzes at the end of each lesson by scoring 80% or more on each of them. Instructors QuantFiQuantFi is a French start-up research firm formed in 2019 with the objective of using the science of quantum computing to provide solutions to the financial services industry. With its staff of PhD's and PhD students, QuantFi engages in fundamental and applied research in in the field of quantum finance, collaborating with industrial partners and universities in seeking breakthroughs in such areas as portfolio optimisation, asset pricing, and trend detection.

This course takes you through all the important topics of data structure and algorithms from scratch. You will learn how to solve real-world problems with linked lists, stacks, queues, sorting algorithms, and a lot more using Python.

Delve into the intricate world of Supply Chain Planning Models and Approaches, gaining insights into forecasting demand, systematic forecasting processes, and the blend of quantitative and qualitative strategies.    This course dissects Supply Chain Planning (SCP) through modules on forecasting demand, criteria for effective forecasting, and systematic forecasting processes. Participants will explore both quantitative and qualitative approaches, unraveling the intricacies of key planning areas essential for successful supply chain management. After the successful completion of the course, you will be able to learn about the following, Understand Supply Chain Planning (SCP) and its pivotal role in organizational success. Explore the tangible benefits derived from effective Supply Chain Planning. Identify key planning areas crucial for streamlined operations in the supply chain. Comprehend the significance of forecasting demand within the supply chain. Examine the criteria utilized in forecasting processes for enhanced accuracy. Acquire knowledge of a systematic approach to forecasting within supply chain management. Explore quantitative approaches employed in supply chain planning for data-driven decision-making. Delve into qualitative approaches utilized in planning to consider non-numeric factors impacting the supply chain. This course provides an in-depth exploration of Supply Chain Planning Models and Approaches, focusing on demand forecasting, systematic processes, and the interplay between quantitative and qualitative strategies. Participants will gain the skills to strategically navigate key planning areas and unlock the benefits of robust Supply Chain Planning for organizational success. Course Structure and Assessment Guidelines Watch this video to gain further insight. Navigating the MSBM Study Portal Watch this video to gain further insight. Interacting with Lectures/Learning Components Watch this video to gain further insight. Supply Chain Planning Models and Approaches Self-paced pre-recorded learning content on this topic. Supply Chain Planning Models and Approaches Put your knowledge to the test with this quiz. Read each question carefully and choose the response that you feel is correct. All MSBM courses are accredited by the relevant partners and awarding bodies. Please refer to MSBM accreditation in about us for more details. There are no strict entry requirements for this course. Work experience will be added advantage to understanding the content of the course. The certificate is designed to enhance the learner's knowledge in the field. This certificate is for everyone eager to know more and get updated on current ideas in their respective field. We recommend this certificate for the following audience, Supply Chain Planner Demand Planning Analyst Inventory Planning Manager Forecasting Specialist Operations Planning Coordinator Supply Chain Analyst Demand Forecasting Manager Logistics Planning Strategist Inventory Control Supervisor Strategic Sourcing Planner Average Completion Time 2 Weeks Accreditation 3 CPD Hours Level Advanced Start Time Anytime 100% Online Study online with ease. Unlimited Access 24/7 unlimited access with pre-recorded lectures. Low Fees Our fees are low and easy to pay online.

Join Energyedge's classroom training on Carbon Capture, Utilization, and Storage (CCUS) well design and monitoring. Enhance your knowledge and skills in this crucial field. Sign up now!

Why choose 3ds max and After Effects Training Course (Live Online Only)? Join our personalized "3ds Max and After Effects Training Course (Live Online Only)" for a focused learning experience. Develop expertise in production environments, 3D modeling, texturing, lighting, animations, VFX and cinematography.  Check Our Website Duration: 10 hrs Method: 1-on-1, Personalized attention. Schedule: Tailor your own hours of your choice, available from Mon to Sat between 9 am and 7 pm. 3ds Max and After Effects Motion Graphics Course Duration: 10 hours Course Outline: Introduction to 3ds Max Familiarize yourself with the 3ds Max interface Create 3D objects and scenes Learn about cameras, lighting, materials, and textures Basic Animation Principles in 3ds Max Understand keyframes and interpolation Create animation cycles for 3D objects Apply animation principles using the graph editor Advanced Animation Techniques in 3ds Max Master custom controllers and expressions Animate with inverse kinematics Create dynamic particle systems and simulations Exporting 3D Scenes to After Effects Prepare 3D scenes for export Import 3D scenes into After Effects Explore 3D layer properties Basic Compositing in After Effects Navigate the After Effects interface Use keyframes and animation curves Compositing 2D and 3D elements Apply effects and filters Advanced Compositing Techniques in After Effects Harness masks and mattes for precision Utilize 3D camera tracking Work with green screen footage Create stunning special effects Integrating 3D and Live-Action Footage in After Effects Match camera angles and movement Incorporate 3D camera data into After Effects Add shadows and reflections for realism Rendering and Outputting Animations Render 3D scenes from 3ds Max Utilize the After Effects render queue Output animations for different formats Motion Graphics Projects Create a basic motion graphics sequence Design an animated logo Craft an engaging animated title sequence Course Requirements: Computer with 3ds Max and After Effects installed Basic knowledge of computer operations Passion for motion graphics