4346 Operations courses in Solihull delivered Online

About the course “Quantum Computing for Finance” is an emerging multidisciplinary field of quantum physics, finance, mathematics, and computer science, in which quantum computations are applied to solve complex problems. “Quantum Algorithms for Computational Finance” is an advanced course in the emerging field of quantum computing for finance. This technical course will develop an understanding in quantum algorithms for its implementation on quantum computers. Through this course, you will learn the basics of various quantum algorithms including: Grover’s and Rudolf’s algorithm, Quantum amplitude Estimation (QAE) algorithm envisioned as a quadratic speed-up over Classical Monte-Carlo simulations, Combinatorial optimization algorithms namely Quantum Approximate Optimization Algorithm (QAOA), and Variational Quantum Eigensolver (VQE), and Quantum-inspired optimization algorithms – Simulated Coherent Ising Machine (Sim-CIM), and Simulated Bifurcation Algorithm (SBA). This course is meant for all those learners who want to explore the long-term employability of quantum computing in finance, assuming that you are familiar with the concepts of quantitative and computational finance. In addition, the course contains several Python based programming exercises for learners to practice the algorithms explained throughout the course. This course is the second part of the specialised educational series: “Quantum Computing for Finance”. What Skills you will learn Ability to perform quantum arithmetic operations and simulations. An understanding of the Quantum Amplitude Estimation algorithm and its variants. The computational and modelling techniques for option pricing and portfolio optimization on a quantum computer. The skills for a career in quantum finance including Quantum Algorithmic Research, Quantitative Asset Management and Trading, financial engineering, and risk management, using quantum computing technology. Course Prerequisites All potential learners must have prior knowledge or familiarity with basic quantum algorithms/basic quantum programming. Before enrolling this course, we recommend all learners to complete the first course “Introduction to Quantitative and Computational Finance” of the series “Quantum Computing for Finance”, if they have no previous experience with the concepts of quantitative and computational finance. Duration The estimated duration to complete this course is approximately 6 weeks (~4hrs/week). Course assessment To complete the course and earn the certification, you must pass all the quizzes at the end of each lesson by scoring 80% or more on each of them. Instructors QuantFiQuantFi is a French start-up research firm formed in 2019 with the objective of using the science of quantum computing to provide solutions to the financial services industry. With its staff of PhD's and PhD students, QuantFi engages in fundamental and applied research in in the field of quantum finance, collaborating with industrial partners and universities in seeking breakthroughs in such areas as portfolio optimisation, asset pricing, and trend detection.

Why choose 3ds max and After Effects Training Course (Live Online Only)? Join our personalized "3ds Max and After Effects Training Course (Live Online Only)" for a focused learning experience. Develop expertise in production environments, 3D modeling, texturing, lighting, animations, VFX and cinematography.  Check Our Website Duration: 10 hrs Method: 1-on-1, Personalized attention. Schedule: Tailor your own hours of your choice, available from Mon to Sat between 9 am and 7 pm. 3ds Max and After Effects Motion Graphics Course Duration: 10 hours Course Outline: Introduction to 3ds Max Familiarize yourself with the 3ds Max interface Create 3D objects and scenes Learn about cameras, lighting, materials, and textures Basic Animation Principles in 3ds Max Understand keyframes and interpolation Create animation cycles for 3D objects Apply animation principles using the graph editor Advanced Animation Techniques in 3ds Max Master custom controllers and expressions Animate with inverse kinematics Create dynamic particle systems and simulations Exporting 3D Scenes to After Effects Prepare 3D scenes for export Import 3D scenes into After Effects Explore 3D layer properties Basic Compositing in After Effects Navigate the After Effects interface Use keyframes and animation curves Compositing 2D and 3D elements Apply effects and filters Advanced Compositing Techniques in After Effects Harness masks and mattes for precision Utilize 3D camera tracking Work with green screen footage Create stunning special effects Integrating 3D and Live-Action Footage in After Effects Match camera angles and movement Incorporate 3D camera data into After Effects Add shadows and reflections for realism Rendering and Outputting Animations Render 3D scenes from 3ds Max Utilize the After Effects render queue Output animations for different formats Motion Graphics Projects Create a basic motion graphics sequence Design an animated logo Craft an engaging animated title sequence Course Requirements: Computer with 3ds Max and After Effects installed Basic knowledge of computer operations Passion for motion graphics

2 QLS Endorsed Courses | CPD Certified | Free PDF & Hard Copy QLS Certificates | 180 CPD Points | Lifetime Access

Overview This comprehensive course on Django Rest Framework Level 4 will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This Django Rest Framework Level 4 comes with accredited certification, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast track your career ladder. How will I get my certificate? You may have to take a quiz or a written test online during or after the course. After successfully completing the course, you will be eligible for the certificate. Who is This course for? There is no experience or previous qualifications required for enrolment on this Django Rest Framework Level 4. It is available to all students, of all academic backgrounds. Requirements Our Django Rest Framework Level 4 is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course, it can be studied in your own time at your own pace. Career Path Having these various qualifications will increase the value in your CV and open you up to multiple sectors such as Business & Management, Admin, Accountancy & Finance, Secretarial & PA, Teaching & Mentoring etc. Course Curriculum 15 sections • 82 lectures • 04:40:00 total length •Module 01: Course and Instructor Introduction: 00:03:00 •Module 02: How to make the best of this course: 00:02:00 •Module 01: What is REST?: 00:06:00 •Module 02: Why REST: 00:08:00 •Module 03: What and Why DJango REST Framework: 00:06:00 •Module 01: Install DJango: 00:03:00 •Module 02: Install DJango REST Framework: 00:01:00 •Module 03: Install MySql and MySql workbench: 00:03:00 •Module 04: Launch MySql workbench: 00:02:00 •Module 05: Install python mysqlclient: 00:01:00 •Module 06: Install ATOM: 00:03:00 •Module 07: Install Postman: 00:01:00 •Module 01: Create the project: 00:02:00 •Module 02: Create a view: 00:02:00 •Module 03: Configure the URL and TEST: 00:03:00 •Module 04: Create app level urls: 00:02:00 •Module 05: Create a model class: 00:03:00 •Module 06: Configure the database and run migrations: 00:03:00 •Module 07: Use the model in the view and test: 00:03:00 •Module 01: DRF Components: 00:06:00 •Module 02: Function Based Views: 00:05:00 •Module 03: Serializers: 00:04:00 •Module 04: Create the Project: 00:02:00 •Module 05: Create the Model: 00:02:00 •Module 06: Create the Serializer: 00:02:00 •Module 07: GET single student: 00:04:00 •Module 08: Create Student: 00:04:00 •Module 09: Implement Non Primary Key Based Operations: 00:07:00 •Module 10: Use @api_view: 00:01:00 •Module 11: Configure the URLs: 00:02:00 •Module 12: Test: 00:07:00 •Module 13: Test Using Postman: 00:04:00 •Module 01: Introduction: 00:01:00 •Module 02: Create the Project: 00:01:00 •Module 03: Implement Non Primary Key Based Operations: 00:06:00 •Module 04: Implement Primary Key Based Operations: 00:07:00 •Module 05: Configure the URLs and TEST: 00:04:00 •Module 01: Introduction: 00:05:00 •Module 02: Non Primary Key based operations: 00:04:00 •Module 03: Primary Key based operations: 00:02:00 •Module 04: Configure the URLs and TEST: 00:02:00 •Module 01: Generics: 00:03:00 •Module 02: Generics in action: 00:03:00 •Module 01: Introduction: 00:03:00 •Module 02: Create ViewSet: 00:02:00 •Module 03: Configure URLs and Test: 00:04:00 •Module 01: Create the Project: 00:03:00 •Module 02: Create model: 00:03:00 •Module 03: Create Serializers: 00:04:00 •Module 04: Create REST endpoints: 00:03:00 •Module 05: Configure URLs: 00:02:00 •Module 06: Test: 00:03:00 •Module 01: Introduction: 00:06:00 •Module 02: Pagination in action: 00:05:00 •Module 03: Pagination at class level: 00:03:00 •Module 04: Using LimitOffsetPagination: 00:01:00 •Module 01: Introduction: 00:04:00 •Module 02: Authentication in action: 00:03:00 •Module 03: Authorization in action: 00:06:00 •Module 04: Global Security: 00:04:00 •Module 01: Usecase: 00:01:00 •Module 02: Create the Project: 00:01:00 •Module 03: Create Model Classes: 00:03:00 •Module 04: Create Reservation Model: 00:01:00 •Module 05: Create Serializers: 00:01:00 •Module 06: Create ViewSets: 00:02:00 •Module 07: Configure the Router: 00:02:00 •Module 08: Run Migrations: 00:01:00 •Module 09: Initial round of testing: 00:04:00 •Module 10: Implement findFlights endpoint: 00:03:00 •Module 11: Test findFlights: 00:05:00 •Module 12: Implement Save Reservation: 00:06:00 •Module 13: Test Save Reservation: 00:04:00 •Module 01: In-Built Validations: 00:04:00 •Module 02: Allowing Blank and Null Values: 00:02:00 •Module 03: Create Custom Validator: 00:05:00 •Module 04: Two more ways: 00:07:00 •Module 01: Introduction: 00:03:00 •Module 02: Configure Token Auth: 00:05:00 •Module 03: Create Users and Token: 00:04:00 •Module 04: Token Auth in action: 00:03:00 •Module 05: Automate Token Creation: 00:09:00

24 Hours Left! Don't Let the Winter Deals Slip Away - Enrol Now! Our Aim Is Your Satisfaction! Offer Ends Soon; Hurry Up!! If you're looking to turn your passion for design into a thriving career, then this CAD Software course is perfect for you. With our comprehensive curriculum, you'll learn everything you need to know about Computer-Aided Design (CAD) and how it's used in various industries. From the basics of 2D and 3D design to more advanced techniques like assemblies and blending operations, you'll gain the skills and knowledge to excel in this field. And with the increasing demand for CAD designers in the United Kingdom, you'll be well-positioned to pursue a rewarding career. This Advanced Diploma in CAD Software Training at QLS Level 6 course is endorsed by The Quality Licence Scheme and accredited by CPDQS (with 150 CPD points) to make your skill development & career progression more accessible than ever! Throughout this CAD Software course, you'll learn from experienced professionals who have years of experience in the industry. They'll guide you through each module, providing you with practical tips and advice on how to succeed as a CAD designer. And with our interactive learning platform, you'll have access to a range of resources and tools to help you stay engaged and motivated. By the end of this course, you'll have a deep understanding of CAD software and its applications in various industries. You'll have gained hands-on experience in designing 2D and 3D shapes, creating assemblies, and using blending operations to create complex designs. With these CAD Software skills, you'll be able to pursue a range of career opportunities in fields like architecture, engineering, and manufacturing. After this CAD Software course, you will be able to learn: Understand the fundamentals of Computer-Aided Design (CAD) Design 2D and 3D shapes using various software tools Create assemblies and use blending operations to create complex designs Use CAD software to create civil drawings with parameters Skills You will Gain CAD design Engineering terms and laws Product simulation, rotation and Geometric shape designing Civil drawings Cost management Take a step toward a brighter future! Why Prefer Us? Earn a certificate endorsed by the Quality Licence Scheme and another certificate accredited by CPDQS Get a free student ID card! (£10 postal charges will be applicable for international delivery) Innovative and engaging content. Free assessments 24/7 tutor support. *** Course Curriculum *** Here is the curriculum breakdown of the course: Module 01: Introduction Module 02: CAD Designer Career in the United Kingdom Module 03: Basics for CAD Design - Part 1 Module 04: Basics for CAD Design - Part 2 Module 05: 2D Shape Module 06: 3D Shape Module 07: Geometry and Modelling Module 08: Assemblies Module 09: Extrusion and Rotations Module 10: Blending Operations in CAD Module 11: Grids and Regular Polygons Module 12: Parameters in Civil Drawings Module 13: Introduction to AutoCAD Module 14: Introduction to T-Flex CAD Module 15: Introduction to SolidWorks Module 16: Introduction to FreeCAD Assessment Process You have to complete the assignment questions given at the end of the course and score a minimum of 60% to pass each exam. Our expert trainers will assess your assignment and give you feedback after you submit the assignment. After passing the Advanced Diploma in CAD Software Training at QLS Level 6 exam, you will be able to request a certificate with additional cost that has been endorsed by the Quality Licence Scheme. CPD 150 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This course is ideal for: Students interested in a career in CAD designing Individuals looking to improve their CAD skills Anyone interested in civil engineering, mechanical or electrical systems Those looking for a new career path in design and engineering Requirements You will not need any prior background or expertise to enrol in this course. Career path After completing this course, you are to start your career or begin the next phase of your career. CAD Designer: £28,000 - £45,000 Mechanical Engineer: £27,000 - £50,000 Electrical Engineer: £26,000 - £50,000 Civil Engineer: £24,000 - £45,000 Architect: £26,000 - £55,000 Industrial Designer: £23,000 - £40,000 Certificates CPDQS Accredited Certificate Digital certificate - £10 Advanced Diploma in CAD Software Training at QLS Level 6 Hard copy certificate - £129 After successfully completing the Advanced Diploma in CAD Software Training at QLS Level 6 course, you can order an original hardcopy certificate of achievement endorsed by the Quality Licence Scheme. The certificate will be home-delivered, with a pricing scheme of - 129 GBP inside the UK 139 GBP (including postal fees) for international delivery CPDQS Accredited Certificate 29 GBP for Printed Hardcopy Certificate inside the UK 39 GBP for Printed Hardcopy Certificate outside the UK (international delivery)

The 'Warehouse Management' course provides comprehensive insights into the principles, practices, and technologies essential for effective warehouse operations. Participants will delve into the core functions of warehouse management, exploring topics such as inventory control, supply chain management, safety protocols, and efficient logistics. From understanding warehouse types to implementing cutting-edge technologies, this course equips learners with the skills needed to optimize warehouse efficiency, streamline processes, and contribute to successful supply chain management. Learning Outcomes: Understand the fundamental concepts and benefits of warehouse management. Explore various types of warehousing and their functions in the supply chain. Gain insights into warehouse management systems and their core functionalities. Identify challenges faced in warehouse management and strategies to overcome them. Learn about the role of technology in modern warehouse operations. Master inventory management techniques, including classification and control. Comprehend the role of human resources in warehouse management. Enhance warehouse safety practices and cost management strategies. Why buy this Warehouse Management? Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the Warehouse Management there will be a written assignment test which you can take either during or at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this course for? This Warehouse Management does not require you to have any prior qualifications or experience. You can just enrol and start learning.  Individuals interested in pursuing a career in logistics and supply chain management. Warehouse managers, supervisors, and team leaders seeking to enhance their skills. Business owners or entrepreneurs involved in inventory management. Professionals looking to improve their understanding of warehouse operations. Prerequisites This Warehouse Management was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path Warehouse Manager - Median salary of $50,000 - $80,000 per year. Logistics Coordinator - Median salary of $40,000 - $60,000 per year. Inventory Control Specialist - Median salary of $40,000 - $60,000 per year. Supply Chain Analyst - Median salary of $50,000 - $70,000 per year. Operations Manager (with warehouse focus) - Median salary of $60,000 - $100,000 per year. Course Curriculum Warehouse Management Fundamentals of Warehouse Management 00:30:00 Warehousing: Function, Benefits and Types of Warehousing 00:30:00 Core Functions Of A Warehouse Management System 00:15:00 Challenges Of Warehouse Management 00:30:00 Technology In The Warehouse 00:45:00 Supply Chain Management Concepts 00:30:00 Warehouse Management Technologies to Adopt 00:15:00 Order Picking in the Warehouse 00:18:00 Managing Warehouse Inventory 00:15:00 Organize the Storage of Inventory in a Warehouse 00:15:00 Inventory Management Techniques 00:30:00 Inventory Control Flow of Processing 01:00:00 Logistics and Supply Chain In A Warehouse 00:30:00 Inventory Classification In The Warehouse 00:15:00 The Role Of Human Resource management In A Warehouse 00:30:00 Warehouse Safety 00:30:00 Warehouse Cost Management 00:15:00 Improve Warehouse Efficiency and Reduce Costs 00:15:00 Mock Exam Mock Exam- Warehouse 00:20:00 Final Exam Final Exam- Warehouse 00:20:00 Assignment Assignment - Warehouse Management 00:00:00

About this Training Course In our pursuit to discover oil & gas in deeper horizons, wells are often drilled in a HPHT environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi (69 MPa) and 300° F (150° C). To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives. This is particularly important when speciality services such as Managed Pressure Drilling (MPD) are being applied with crews and/or supervisors who are not intricately familiar with complicated well control incidents. As we seek to prevent costly non-productive time, attention will also be paid to enabling technologies like expandable solid tubulars, mud coolers and specialty mud. The 3 full-day course will explain the key characteristics and challenges of HPHT Planning and Well Control. This includes: Differences between HPHT and standard (conventional) wells and what this entails for well design. The challenges unique to HPHT and the impact of Pore Pressure Prediction (PPP). Static and Dynamic Equivalent Mud Density and the factors that influence the ultimate Bottom Hole Pressure (BHP). Control practices such as 'fingerprinting' to identify what's happening downhole. HPHT shut-in procedures and practices. Specific HPHT equipment and drilling tool requirements and advantages of Managed Pressure Drilling (MPD). Well control on/off bottom, bull-heading and dealing with kick-loss situations. Mud management, tolerance on mud properties and challenges in cementing. Case history on emergency control. Drills, team effort, checklists, human factor and 'getting everybody on board'. Training Objectives By the end of this course, participants will be able to: Recognize the main differences in planning/design between HPHT and standard (conventional) wells as well as the challenges that will have to be faced. Explain drilling and tripping operational challenges and practices as well as how to manage these effectively. Identify wellbore breathing (a.k.a. ballooning) and how to safely deal with this within the narrow window for mud density selection. Apply practices of consistent fingerprinting and how to develop procedures for this to benefit the rig team. Measure and understand bottom hole pressure and the effect of influencing factors such as temperature, rotation and flow rate. Understand the critical mud properties to alleviate barite sag, general mud density control techniques and specify the essentials in cementing. Manage losses and low fracture gradients with well bore strengthening methods. Execute sound HPHT shut-in procedures. Understand how MPD can assist in the safe and efficient drilling and hole cleaning of HPHT wells. Understand the use of MPD Influx Management Envelopes. Identify critical Early Kick Detection Systems (EKDS) and HPHT well control equipment. Execute safe secondary well control practices in a H2S environment, bull-heading, on and off bottom and handling of gas at surface, using MGS and hydrate mitigation measures. Target Audience The course is intended for: Office-based staff engaged in HPHT well planning and day-to-day operations Field-based rig staff working as front-line supervisors - from Assistant Drillers to Senior Toolpushers Field-based rig staff working for service companies supporting the execution of HPHT wells (MPD, mud and mudlogging services etc.) Trainer Your expert course leader has over 45 years of experience in the Oil & Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil & gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of 'doing-the-basics' are still reaped today when standing in front of a class. After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company's learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again. After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Deal Price is Active; Offer Ends Soon; Hurry Up!! Nowadays, just having a degree isn't enough to secure a job! Employers want job candidates to have relevant skills. Furthermore, because talented individuals are valued by their employers, they are more likely to be promoted and have job stability. This Hospitality Management course is for you if you are a fresher looking to show off your skills to potential employers, a professional looking to advance in their career, or an organisation looking to keep its personnel up to date on industry trends. Learn from industry professionals and quickly equip yourself with the specific knowledge and skills you need to excel in your chosen career through the online training course. This Diploma in Hospitality Management at QLS Level 5 course is endorsed by The Quality Licence Scheme and accredited by CPDQS (with 150 CPD points) to make your skill development & career progression more accessible than ever! Why Prefer This Hospitality Management Course? Opportunity to earn certificate a certificate endorsed by the Quality Licence Scheme & another accredited by CPDQS after completing the Hospitality Management course Get a free student ID card! (£10 postal charge will be applicable for international delivery) Innovative and engaging content. Free assessments 24/7 tutor support. The course is broken down into several in-depth modules to provide you with the most convenient and rich learning experience possible. Upon successful completion of the course, you will receive an instant e-certificate as proof of the comprehensive skill development and competency. Add these amazing new skills to your resume and boost your employability by simply enrolling on this course. With this comprehensive course, you can achieve your dreams and train for your ideal career. The course provides students with an in-depth learning experience that they can work through at their own pace to enhance their professional development. You'll get a Free Student ID card by enrolling in this course. This ID card entitles you to discounts on bus tickets, movie tickets, and library cards. Enrolling on the course will ensure that you land your dream career faster than you thought possible. Stand out from the crowd and train for the job you want with the program. Experts created the course to provide a rich and in-depth training experience for all students who enrol in it. Enrol in the course right now and you'll have immediate access to all of the course materials. Then, from any internet-enabled device, access the course materials and learn when it's convenient for you. Start your learning journey straight away with this course and take a step toward a brighter future! *** Course Curriculum *** Here is the curriculum breakdown of the Hospitality Management course: Module 1: Introduction to Hospitality Management Importance of Hospitality Managing the Delivery of Hospitality Summary Assessment Module 2: An Overview of Hotel Industry Hotel Eco Hotel Gratuity Summary Assessment Module 3: The Process of Selection and Recruitment in the Hospitality Industry Introduction Flexible Employees The Job Description Summary Assessment Module 4: The Process of Development and Training in the Hospitality Industry Introduction The Benefits of Training Summary Assessment Module 5: Management of Front Office Operations The Arrival Chronology Front Office Operations Summary Assessment Module 6: Management of Housekeeping, Engineering and Security Operations Housekeeping Management of Guest Amenities Summary Assessment Module 7: Management of Food and Beverage Operations Kitchen Food Operations Summary Assessment Module 8: Management of Service Quality in Hospitality Industry Introduction Hospitality Retail Service Quality Summary Assessment Module 9: Marketing in Travel and Tourism Business Strategy in Marketing Marketing Role of GTA Summary Assessment Module 10: Accounting in Hospitality Industry What is an Account Voucher Summary Assessment Module 11: Customer Satisfaction Great Expectations The Everlasting Review Summary Assessment Module 12: E-Hospitality and Technology Hospitality and Internet Advances Conclusions Summary Assessment Assessment Process After completing an online course module, you will be given immediate access to a specially designed MCQ test. The results will be immediately analysed, and the score will be shown for your review. The passing score for each test will be set at 60%. After passing the Diploma in Hospitality Management at QLS Level 5 exam, you will be able to request a certificate at an additional cost that has been endorsed by the Quality Licence Scheme. CPD 150 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone interested in learning more about this subject should take this course. This will help you grasp the basic concepts as well as develop a thorough understanding of the subject. All are welcome to take this course. There are no prerequisites for enrolment, and you can access the course materials from any location in the world. Requirements The Hospitality Management program does not require any prior knowledge; everyone may participate! This Hospitality Management course is open to anyone interested in learning from anywhere in the world. Every student must be over the age of 16 and have a passion for learning and literacy. This 100% online course can be accessed from any internet-connected device, such as a computer, tablet, or smartphone. This Hospitality Management course allows you to study and grow a quality skillset at your speed. Career path After completing this Hospitality Management Course, you are to start your career or begin the next phase of your career in this field. Our entire Hospitality Management course will help you to gain a position of respect and dignity over your competitors. The certificate enhances your CV and helps you find work in the field concerned Certificates Certificate of completion Digital certificate - £10 Diploma in Hospitality Management at QLS Level 5 Hard copy certificate - £119 Show off Your New Skills with a Certificate of Completion After successfully completing the Diploma in Hospitality Management at QLS Level 5, you can order an original hardcopy certificate of achievement endorsed by the Quality Licence Scheme. The certificate will be home-delivered, with a pricing scheme of - 119 GBP inside the UK 129 GBP (including postal fees) for International Delivery Certificate Accredited by CPDQS 29 GBP for Printed Hardcopy Certificate inside the UK 39 GBP for Printed Hardcopy Certificate outside the UK (International Delivery)

Step into the world of professional mastery where business acumen meets organisational finesse. This comprehensive course seamlessly weaves together the threads of Office Management, Business Administration, and Retail Customer Service, transforming you into a virtuoso of corporate excellence. Unlock the gateway to success as you delve into the intricacies of effective office administration, honing skills that transcend the ordinary and catapult you into the echelons of business leadership. Key Features: CPD Certified Free Certificate Developed by Specialist Lifetime Access From mastering conflict resolution to crafting a corporate brand that resonates, each module serves as a stepping stone towards managerial prowess. Dive deep into the art of building robust organisational structures and cultivating a customer-centric ethos. Leadership essentials await, equipping you with the skills to train employees for success, manage operations seamlessly, and ensure financial prowess. Whether you're navigating the intricate dance of retail management or decoding the nuances of the sales process, this course offers a holistic journey through the corridors of business expertise. Join us, and let your career trajectory soar to new heights, armed with the knowledge to shape businesses and leave an indelible mark in the realm of corporate excellence. Course Curriculum Module 01: Introduction to Business Administration Module 02: Administrator Proficiency Skills Module 03: Conflict Management Strategies Module 04: Corporate Brand Development Module 05: Organizational Structure Design Module 06: Ethics and Customer-Centric Teams Module 07: Efficient Operations Management Module 08: Leadership Essentials and Employee Training Module 09: Financial Management and Succession Planning Module 10: Product Marketing Strategies Module 11: Building Successful Teams and Products Module 12: Effective Retail Management Module 13: Sales Process Optimization and Customer Checkout Module 14: Understanding Financial Terms in Business Learning Outcomes: Master conflict resolution techniques vital for effective office management. Design and implement organisational structures to enhance operational efficiency. Develop skills to build and nurture a compelling corporate brand identity. Cultivate ethics within your team, focusing on exceptional customer care. Acquire essential leadership skills for training employees and ensuring success. Gain proficiency in retail management, from product placement to customer checkout. CPD 10 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Aspiring office managers seeking comprehensive administrative and leadership skills. Business professionals aiming to enhance their strategic and ethical decision-making abilities. Individuals interested in retail management and customer service excellence. Those seeking knowledge in designing organisational structures and managing operations. Entrepreneurs desiring a holistic understanding of business administration and retail. Career path Office Manager Business Administrator Corporate Brand Manager Retail Manager Operations Specialist Customer Service Team Lead Certificates Digital certificate Digital certificate - Included Certificate of Completion Digital certificate - Included Will be downloadable when all lectures have been completed.

The aim of this course is to provide students with a comprehensive understanding of the regulatory environment that governs the operations of commercial banks.After the successful completion of the course, you will be able to learn about the following, Analyze the role of the bank regulatory system in the financial system. Identify regulatory bodies and their functions. Evaluate the financial regulatory framework. Analyze banking regulations and their compliance requirements. Assess the impact of regulatory fragmentation on the financial system. Evaluate commercial bank lending policies. Analyze the concept of investment policy. Identify the components of an investment policy. The aim of this course is to provide students with a comprehensive understanding of the regulatory environment that governs the operations of commercial banks. By the end of the course, students should be able to evaluate the impact of regulatory frameworks on the banking industry, analyze the lending and investment policies of commercial banks, and assess the functions of central banks and the international banking system. This course provides an overview of the regulatory environment in which commercial banks operate. Students will learn about the regulatory bodies, frameworks, and compliance requirements that impact the banking industry, as well as the lending and investment policies of commercial banks. The course also covers the international banking system and the functions of central banks. VIDEO - Course Structure and Assessment Guidelines Watch this video to gain further insight. Navigating the MSBM Study Portal Watch this video to gain further insight. Interacting with Lectures/Learning Components Watch this video to gain further insight. Understanding the Commercial Bank's Regulatory Environment Self-paced pre-recorded learning content on this topic. Understanding the Commercial Bank's Regulatory Environment Put your knowledge to the test with this quiz. Read each question carefully and choose the response that you feel is correct. All MSBM courses are accredited by the relevant partners and awarding bodies. Please refer to MSBM accreditation in about us for more details. There are no strict entry requirements for this course. Work experience will be added advantage to understanding the content of the course. The certificate is designed to enhance the learner's knowledge in the field. This certificate is for everyone eager to know more and get updated on current ideas in their respective field. We recommend this certificate for the following audience. Regulatory Compliance Officer Bank Examiner Risk Management Analyst Compliance Manager Financial Analyst Internal Auditor Banking Consultant Policy Analyst Credit Risk Analyst Anti-Money Laundering (AML) Compliance Officer Average Completion Time 2 Weeks Accreditation 3 CPD Hours Level Advanced Start Time Anytime 100% Online Study online with ease. Unlimited Access 24/7 unlimited access with pre-recorded lectures. Low Fees Our fees are low and easy to pay online.