Name: EC-Council Certified Chief Information Security Officer (C|CISO)
Price: 3495 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong> </h2>
<p>Geomechanical evaluations are about the assessment of deformations and failure in the subsurface due to oil &amp; gas production, geothermal operations, CO<sub>2</sub> storage and other operations. All geomechanical evaluations include four types of modelling assumptions, which will be systematically addressed in this training, namely:</p>
<p>1.      Geometrical modelling assumption: Impact of structural styles on initial stress and stress redistribution due to operations</p>
<p>2.      Formation (or constitutive) behaviour: Linear elastic and non-linear behaviour, associated models and their parameters, and methods how to constrain these using</p>
<p>3.      Initial stress: Relation with structural setting and methods to quantify the in-situ stress condition</p>
<p>4.      Loading conditions: Changes in pore pressure and temperature on wellbore and field scale</p>
<p>This 5 full-day course starts with the determination of the stresses in the earth, the impact of different structural styles, salt bodies, faulting and folding on the orientation of the three main principal stress components. Different (field) data sources will be discussed to constrain their magnitude, while exercises will be made to gain hands-on experience.</p>
<p>Subsequently, the concepts of stress and strain will be discussed, linear elasticity, total and effective stress and poro-elasticity in 1D, 2D and 3D, as well as thermal expansion. Participants will be able to construct and interpret a Mohr-circles. Also, different failure mechanisms and associated models (plastic, viscous) will be discussed. All these concepts apply on a material point level.</p>
<p>Next, geomechanics on the wellbore scale is addressed, starting with the stress distribution around the wellbore (Kirsch equations). The impact of mudweight on shear and tensile failure (fracturing) will be calculated, and participants will be able to determine the mudweight window stable drilling operations, while considering well deviation and the use of oil-based and water-based muds (pore pressure penetration). Fracturing conditions and fracture propagation will be addressed.</p>
<p>Field-scale geomechanics is addressed on the fourth day, focussing on building a 3D geomechanical model that is fit-for-purpose (focussing on the risks that need evaluation). Here, geological interpretation (layering), initial stress and formation property estimation (from petrophysical logs and lab experiments) as well as determining the loading conditions come together.</p>
<p>The course is concluded with interpretation of the field-wide geomechanical response to reservoir depletion with special attention to reservoir compaction &amp; subsidence, well failure and fault reactivation &amp; induced seismicity. Special attention is paid to uncertainties and formulating advice that impacts decision-making during development and production stages of a project.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completing of this course, the participants will be able to:</p>
<ul>
<li>Identify potential project risks that may need a geomechanical evaluation</li>
<li>Construct a pressure-depth plot based on available field data (density logs, (X)LOT, FIT, RFT)</li>
<li>Employ log-based correlation function to estimate mechanical properties</li>
<li>Produce a simplified, but appropriate geometrical (layered, upscaled) model that honours contrasts in initial stress, formation properties and loading conditions, including</li>
<li>Construct and interpret a Mohr-circle for shear and tensile failure</li>
<li>Calculate the mud weight that leads to shear and tensile failure (fracturing conditions)</li>
<li>Identify potential lab experiments to measure required formation properties</li>
<li>Describe the workflow and data to develop a field-wide fit-for-purpose geomechanical model</li>
<li>Discuss the qualitative impact of pressure and temperature change on the risk related to compaction, well failure, top-seal integrity and fault reactivation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion</strong>.</p>
<p>There is no specific formal pre-requisite for this course. However, the participants are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 30 years of experience in the Oil &amp; Gas industry, covering all geomechanical issues in the petroleum industry for Shell. Some of his projects included doing research and providing operational advice in wellbore stability, sand failure prediction, and oil-shale retortion among others. He guided multi-disciplinary teams in compaction &amp; subsidence, top-seal integrity, fault reactivation, induced-seismicity and containment. He was also involved in projects related to Carbon Capture Storage (CCS).</p>
<p>He is the founding father of various innovations and assessment tools, and developed new insights into the root causes seismicity induced by Oil &amp; Gas production. Furthermore, he was the regional coordinator for technology deployment in Africa, and Smart Fields (DOFF, iField) design advisor for Shell globally. He was responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for the last 10 years. He served as one of the Subject Matter Expert (SME) on geomechanics, provided Technical Assurance to many risk assessments, and is a co-author of Shell's global minimun standard on top-seal integry and containment. He has a MSc and PhD in Civil Engineering and computational mechanics from Delft University of Technology, The Netherlands.</p>
<p><strong>Training experience:</strong></p>
<p>Developed and delivered the following (between 2010 and 2020):</p>
<ul>
<li>The competence framework for the global geomechanical discipline in Shell</li>
<li>Online Geomechanical training programs for petroleum engineers (post-doc level)</li>
<li>The global minimum standard for top-seal integrity assessment in Shell</li>
<li>Over 50 learning nuggets with Subject Matter Experts</li>
<li>Various Shell virtual Geomechanical training courses covering all subjects</li>
<li>Developed Advanced Geomechanical training program for experienced staff in Shell</li>
<li>Coaching of KPC staff on Geomechanics and containment issues on an internship at Shell in The Netherlands, Q4 2014</li>
<li>Lectured at the Utrecht University summer school (The Netherlands, 2020) on induced seismicity among renowned earthquake experts (Prof. Mark Zoback, Prof. Jean-Philippe Avouac, Prof. Jean-Pierre Ampuero and Prof. Torsten Dahm) (https://www.nwo.nl/onderzoeksprogrammas/deepnl/bijeenkomsten/6-10-juli-2020-deepnl-webinar-series-induced-seismicity)</li>
<li>Lectured at the Danish Technical University summer school (Copenhagen, 2021) summer school on Carbon Capture and Storage (https://www.oilgas.dtu.dk/english/Events/DHRTC-Summer-School)</li>
<li>Virtual Carbon Capture and Storage (CCS): Project Risks &amp; How to Manage Them training course (October and November 2021)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Geomechanics at Well and Field Scale

Team of 10, pp

Normal Fee, pp

Redhill

<h3><b>CWAP training course description</b></h3>
      <p>This WiFi analysis course consists of hands-on
learning using the latest enterprise wireless LAN
analysis and troubleshooting tools. The course takes an
in-depth look at the functionality of WLANs, intended
operation of the 802.11 protocol and Wi-Fi Alliance
specifications, WLAN frame formatting and structure,
troubleshooting methodology, and protocol analysis. It
also includes extensive training in modern spectrum
analysis with a focus on advanced RF behaviour
analysis, data collection methods, interpreting spectrum
plots and charts, and understanding advanced features
of WLAN spectrum analysers.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
       <li>Analyse WiFi frames using Wireshark.</li>
 <li> Explain 802.11 protocol operation.</li>
 <li>Troubleshoot WiFi networks using Wireshark.</li>
 <li>Troubleshoot WiFi networks using spectrum
analysers.
</li>
                  </ul>
       
        <h5>
        <b>CWAP training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
            Technical Network Staff<br />
					Anyone looking to become a CWAP
              
							<li><b>Prerequisites:</b></li>
							
              <p> Certified Wireless Network Administrator</p>
              
							<li><b>Duration</b></li>
							
              <p>4 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>CWAP training course contents</b></h3>
				<p><b>Principles of WLAN Communication</b><br />
802.11 Working Group, OSI reference model and the 802.11 PHY
and MAC, Communication sublayers and data units, WLAN
architecture components, Organization of station forwarding
Addressing and internetworking operation, Modern WLAN product
architectures.</p>
			
<p><b>Physical (PHY) and MAC Layer Formats and Technologies</b><br />
Physical layer functions, Preamble function and format, Header
purpose and structure, Analysis of PHY problems, Physical PPDU
formats, 802.11b, 802.11a, 802.11g, 802.11n, MAC frame
components, MAC encapsulation, Fields and subfields of the MAC
header, Frame Control, Frame types and subtypes and their uses,
Addressing, Frame body, Data frame format, Control frame format,
Management frame format, Information elements and fields.</p>
			
<p><b>Beaconing and synchronization</b><br />
Scanning, Client state machine, 802.11 contention, QoS,
Admission control, Band steering and airtime fairness mechanisms
Fragmentation, Acknowledgments and Block acknowledgments,
Protection mechanisms and backward compatibility, Power
management, Dynamic Frequency Selection (DFS) and Transmit
Power Control (TPC), Security components, methods, and
exchanges, Roaming procedures exchanges, Future protocol
enhancements.</p>
	
<p><b>802.11n</b><br />
Transmit beamforming, Spatial multiplexing, Maximal Ratio
Combining (MRC), Space-Time Block Coding, 40 MHz channels,
Frame aggregation, HT-OFDM format, Modulation and Coding
Schemes (MCS), HT frame formatting and more.</p>
	
<p><b>Protocol Analysis Tools and Methodology</b><br />
Troubleshooting methodology, Protocol analyser types, Analysis
NIC/adapter selection and constraints, Interpreting results based
on location, Analyzer settings and features, Filtering and channel
scanning, Interpreting decodes, Using advanced analysis features,
Assessing WLAN health and behaviour factors, Evaluating network
statistics, Troubleshooting common problems, Wired analysis to
support wireless network issues.</p>
	
<p><b>Spectrum Analysis Tools and Methodology</b><br />
Radio frequency behaviour review, Visualizing RF domains using
spectrum measurement tools, Spectrum analyser types and
operation, Analyser specifications and characteristics,
Understanding spectrum data presentation, Interpreting plots and
charts, Common WLAN spectrum analyser features, Identifying
transmit patterns, Device classification and network impact,
Recognizing transmit signatures.</p>
	
<h3>Hands on lab exercises</h3>
<b>Wireshark Setup, Use, and In-Depth Analysis</b><br />
Wireshark is fundamental to troubleshooting. Labs include:<br />
				
<p><br />
- Capabilities, configuration, and data display<br />
- Opening, collecting, saving, and modifying capture files.<br />
- Filtering traffic, and using colouring rules as analysis aides.<br />
- Live captures based on a set of desired collection criteria.<br />
- Identify and isolate network problems.<br />
- Conversation analysis.<br />
- Remote packet capture with an AP.<br />
</p><br />
<b>Understanding Frame Components</b><br />
Familiarity with the frame structure and contents is essential in real
-world troubleshooting efforts. Labs include:<br />
<p><br />
- Understanding the MAC header<br />
- Comparing the three major frame types and their subtypes<br />
- Analysing frame formats of individual frame types<br />
- Analysing 802.11n frame components<br />
- Additional information is reported by protocol analysers<br />
- Information not visible in protocol analysers<br />
</p><br />
<b>Frame Exchanges</b><br />
Understanding frame exchange rules and behaviors is critical to
identifying expected and unexpected. It is also necessary to
understand what is normal so that aberrations can be properly
troubleshot. Labs include:<br />
<p><br />
- Connectivity exchanges and sequences<br />
- Legacy and modern security exchanges<br />
- ERP and HT protection mechanisms<br />
- Power save behaviour<br />
- Acknowledgments, block acknowledgments, and
supporting action frames<br />
- Dynamic rate switching<br />
- Band steering</p><br />
				
<b>Troubleshooting Common Problems</b><br /> This lab exposes students
to hands-on troubleshooting skills by setting up common problems
in WLANs and allowing students to attempt to solve them.
<br />
<p><br />
- Trouleshooting connectivity exchanges<br />
- Troubleshooting 802.1X and EAP exchanges<br />
	- Troubleshooting roaming<br /></p>
				
<b>Spectrum Analyzer Setup, Use, and In-Depth Analysis</b><br />
Specifically, it will explore the plots and charts used to display
spectrum data and how to interpret this data to define a
transmitter's impact on the network. The following are covered:
				
<p><br />
- Installing the analyser and using display and navigation<br />
- The 'RF perspective' provided by each plot and chart<br />
- Using built-in features and automated device identification<br />
- Characterizing the behaviours of an interference source<br />
- Assessing the impact of an interference source<br />
- Determining the impact of transmitter proximity on
interference.<br />
- Identifying signatures of common transmitters<br />
- Remote spectrum analysis with an AP<br /></p>

Systems & Network Training

Network & Security

Network Engineer

Certified Wireless Analysis Professional

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Gas wells are the most uncertain hence critical component of any gas production system. A successful gas project relies on a reliable forecast of gas well production and on timely implementation of measures that restore, sustain and improve gas well capacity, and maximize reserves. This 5-day course provides the skills to understand and analyze (changes in) gas well performance, and to select and design those remedial measures. It addresses all four gas well components i.e. reservoir performance, inflow performance, outflow performance and surface performance, individually and combined.</p>
<p>In depletion-drive reservoirs, the gas well outflow performance becomes inevitably compromised as the reservoir pressure depletes and the gas rate becomes insufficient to lift liquid water and condensate to surface. This condition is referred to as liquid loading and causes significant loss of well capacity and reserves. This 5-day course provides the means to recognize and predict liquid loading, introduces the deliquification techniques that mitigate liquid loading, and then teaches how to select, design, install and operate the optimum suite of deliquification measures.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this course, participants will be able to:</p>
<ul>
<li>Recognize and model gas well reservoir, inflow, outflow and surface performance</li>
<li>Understand and model gas well production forecast and reserves</li>
<li>Identify and model gas well performance threats and opportunities, specifically liquid loading and deliquification</li>
<li>Select and justify remedial measures that mitigate those threats or realize those opportunities, specifically deliquification measures</li>
<li>Understand design, installation and operation of those deliquification measures</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>production engineer, surveillance engineer, completion engineer, production/process chemist, reservoir engineer, production programmer, production operator, as well as other professionals responsible for selecting, installing, operating, monitoring and optimizing deliquification</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This course consists of a series of lectures and exercises. The lectures are interactive with field examples to illustrate models and concepts, where participants are encouraged to contribute their own relevant field examples. The exercises make use of a series of Excel worksheets for model calculations. Participants are invited to implement their own field specific well data. When arranged beforehand, PROSPER gas well performance software can be used as well.</p>
<p>This course addresses ways and means to monitor and manage gas well performance and deliquification. It covers the purpose, outcome and benefit of gas well surveillance and capacity measures to assist future surveillance and capacity planning. Specifically, it addresses the selection and implementation of deliquification measures.</p>
<p>This course introduces the skills and tools required for periodic review of gas well performance in support of critical business processes</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader brings with him 38 years of oil and gas field experience largely within Shell of which 25 years as gas well production engineer. He has covered the full spectrum of activities moving from R&amp;D to green field development to brown field surveillance and optimisation, to become a leading gas well performance and deliquification specialist.</p>
<p>He likes to capture the complex reality of gas well inflow, outflow and reservoir performance by means of practical data-driven rules and tools that cover a wide range of conditions i.e. shallow-to-deep, prolific-to-tight, dry-to-wet, green-to-brown, 1-1/2'-to-9-5/8' tubing, and depletion-to-aquifer drive.</p>
<p>Before his retirement end 2020, He worked for Shell affiliated oil and gas companies including Shell Malaysia, Petroleum Development Oman, NAM Netherlands and Shell R&amp;D in Netherlands and USA. Since then, he has been active as an independent trainer and consultant, amongst others for Cairn India.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Optimizing Gas Well Performance & Deliquification

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Reservoir engineering methods, data and models are used in the E&amp;P business to describe and optimise hydrocarbon recovery. This 5 full-day course addresses reservoir engineering concepts and methods to enable cross-disciplinary team work and the smooth exchange of ideas and experience.</p>
<p>In this course, participants will gain an in-depth understanding of the fundamentals of reservoir engineering and a broad range of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves. The topics covered in this course will be illustrated with practical and actual field cases. Some self-study or reading will be required from participants.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this course, participants will be able to:</p>
<ul>
<li>Describe use of permeability and fluid saturation in reservoir engineering.</li>
<li>Explain the assessment of hydrocarbon resources and recoverable reserves estimation.</li>
<li>Understand analysis and modelling of fluid behaviour.</li>
<li>Explain oil and gas reservoir performance.</li>
<li>Describe material balance methods in oil and gas reservoirs.</li>
<li>Understand design and analysis of well tests.</li>
<li>Understand analysis and production of producing wells and forecasting methods.</li>
<li>Describe fluid displacement at the pore and reservoir scale.</li>
<li>Explain reservoir simulation approaches.</li>
<li>Describe tools for handling the uncertainty in reservoir analysis.</li>
<li>Describe various recovery methods from primary to enhanced recovery.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for professionals with prior technical or engineering exposure to exploration and production activities. Targeted participants include <strong>geoscientists, production engineers, petrophysicists and petroleum engineers involved with exploration and development of oil &amp; gas reservoirs</strong>. The course will also benefit petroleum engineering team leaders as well as IT staff and support staff who work with reservoir engineering, development and production departments.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an independent Reservoir Engineering Consultant, providing project consultancy and reservoir engineering training for global customers. He retired from Shell in 2012 and during the last years of his Shell career, he held the Senior Reserves Consultant for the Middle East and Reservoir Engineering Discipline Lead positions. He is a seasoned Petroleum Engineering professional, with global experience in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). His technical expertise is in reserves and resource management, reservoir engineering quality assurance, and staff development as well as carbonate reservoirs, modelling and reservoir simulation. </p>
<p><strong>PROFESSIONAL EXPERIENCE</strong></p>
<p><strong>2012 to date Independent Reservoir Engineering Consultant</strong></p>
<p>Petroleum and reservoir engineering advice, training and services. Reservoir engineering training for major oil companies, engineering firms and other global customers. Assurance of SPE and SEC reserves compliance. Participation in SPE reserves and resources estimation Advanced Technology Workshops both as an organising committee member and as session speaker.</p>
<p> </p>
<p><strong>2008 - 2012 Shell International E&amp;P, the Hague, the Netherlands</strong></p>
<p>Senior Reserves Consultant for Shell business units and joint ventures in the Middle East Region</p>
<p>Assurance of SEC and SPE compliance of reserves and resources. Industry publications and conference contributions a.o. SPE guidelines on probabilistic reserves estimation.</p>
<p><strong> </strong></p>
<p><strong>2006 - 2008 Shell E&amp;P Technology Solutions, Rijswijk, the Netherlands</strong></p>
<p>Reservoir Engineering Discipline Lead</p>
<p>Responsible for Reservoir Engineering in global projects and for staff planning and development (over 60 international Reservoir Engineers).</p>
<p><strong> </strong></p>
<p><strong>2001 - 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&amp;P</strong></p>
<p>Applications and Research / Shell Representative Office Oman</p>
<p><strong> </strong></p>
<p><strong>Petroleum Engineering Manager</strong></p>
<p>PE Manager in the Carbonate Research Centre, a joint venture between Sultan Qaboos University in Oman and Shell International. Industrial research projects and teaching on recovery aspects of carbonate reservoir development.</p>
<p><strong> </strong></p>
<p><strong>1997 - 2000 Shell International E&amp;P, Rijswijk, the Netherlands</strong></p>
<p>Principal Reservoir Engineer</p>
<p>Coordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria).</p>
<p><strong> </strong></p>
<p><strong>1992 - 1996 Shell Training Centre, Noordwijkerhout, the Netherlands</strong></p>
<p>Reservoir Engineering Programme Training Director</p>
<p>Advanced PE training events, QA/QC, design and delivery of courses to Shell staff.</p>
<p><strong> </strong></p>
<p><strong>1985 - 1992 Shell International, SIPM, the Hague, The Netherlands</strong></p>
<p>Senior Reservoir Engineer</p>
<p>Reservoir simulation, integrated reservoir modelling and gas field development and major contributor to the Shell internal Gas Field Planning Tool development. Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt.</p>
<p><strong> </strong></p>
<p><strong>1984 - 1985 Geological Survey of the Netherlands, Ministry of Economic Affairs</strong></p>
<p>Reservoir Engineering Section Head</p>
<p>Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First-hand experience with a government view on resource management.</p>
<p><strong> </strong></p>
<p><strong>1976 - 1984 NAM, Assen, The Netherlands and SSB/SSPC, Miri, Malaysia</strong></p>
<p>Wellsite Operations Engineer / Operational Reservoir Engineer</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Reservoir Engineering for Geosciences Professionals and Other Disciplines

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided.</p>
<p>In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will acquire in-depth knowledge of:</p>
<ul>
<li>Risk management and 'As Low as Reasonably Practicable' (ALARP) principles.</li>
<li>Different aspects of process design that influence process safety.</li>
<li>Approach to 'inherently safer' design.</li>
<li>Defence in depth using 'layers of protection'.</li>
<li>Process for ensuring the technical integrity of safety-critical equipment.</li>
<li>Hazards associated with process materials.</li>
<li>Range of hazard identification and consequence modelling techniques.</li>
<li>Causes and mitigation of human error.</li>
<li>Reliability and availability of safety-critical protection equipment.</li>
<li>Role of engineered safety-critical equipment and systems.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline.</p>
<p>It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status.</p>
<p>This course will benefit professionals such as:</p>
<ul>
<li>Operations and maintenance supervisors</li>
<li>Process, mechanical and chemical engineers and technicians</li>
<li>Design engineers, project engineers and HSE managers</li>
<li>Control, automation and instrumentation engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations.</p>
<p>His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch.</p>
<p>He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Process Safety Engineering

<div>
</div>
<section>
<div>
<h2><strong>About this Course</strong></h2>
<p>This 5 full-day course presents the most modern statistical and mathematical forecasting frameworks used by practitioners to tackle the load forecasting problem across short time and long time scales. The course presents practical applications to solving forecasting challenges, supported by real life examples from large control areas. It presents the weather impacts on the load forecasts and the methodologies employed to quantify the weather effect and building a repository of weather normal data.</p>
<p>A good load forecast methodology must improve its forecasting accuracy and support a consistent load forecasting process. The load forecasting widely used in the power industry has evolved significantly with the advancement and adoption of Artificial Intelligence techniques such as Machine Learning.</p>
<p>With the increased penetration of inverter-based resources, the operation of electric grids grew in complexity, leading to load forecasts that are updated more frequently than once a day. Furthermore, several jurisdictions adopted a smaller granularity than the hourly load forecasts in the effort to reduce the forecasting uncertainties.</p>
<p>On the generation side, fuel forecasting professionals must meet energy requirements while making allowance for the uncertainty on both the demand and the supply side.</p>
<p>This training course will also feature a guest speaker, who is a Ph.D candidate to provide insights into the most modern aspects of Artificial Intelligence in the context of load forecasting.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>This course offers a comprehensive approach to all aspects of load forecasting:</span></p>
<ul>
<li><span>Gain a perspective of load forecasting from both operators in the generating plant and system operators.</span></li>
<li><span>Understand and review the advanced load forecasting concepts and forecasting methodologies</span></li>
<li><span>Learn the application of Artificial Neural Networks and Probabilistic Forecasting methods to manage forecasting uncertainties in short time frames</span></li>
<li><span>Appreciate market segmentation and econometric framework for long term forecasts</span></li>
<li><span>Find out the most recent practical application of load forecasting as examples from large power companies</span></li>
<li><span>Get access to recent industry reports and developments</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Energy load forecasting professionals from power plant and system operators</span></li>
<li><span>Energy planners and energy outlook forecasters and plant operators</span></li>
<li><span>Fuel procurement professionals</span></li>
<li><span>Planners and schedulers of thermal generating units</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course instructor is a Utility Executive with extensive global experience in power system operation and planning, energy markets, enterprise risk and regulatory oversight. She consults on energy markets integrating renewable resources from planning to operation. She led complex projects in operations and conducted long term planning studies to support planning and operational reliability standards. Specializing in Smart Grids, Operational flexibilities, Renewable generation, Reliability, Financial Engineering, Energy Markets and Power System Integration, she was recently engaged by the Inter-American Development Bank/MHI in Guyana. She was the Operations Expert in the regulatory assessment in Oman. She is a registered member of the Professional Engineers of Ontario, Canada. She is also a contributing member to the IEEE Standards Association, WG Blockchain P2418.5.</span></p>
<p><span>With over 25 years with Ontario Power Generation (Revenue $1.2 Billion CAD, I/S 16 GW), she served as Canadian representative in CIGRE, committee member in NSERC (Natural Sciences and Engineering Research Council of Canada), and Senior Member IEEE and Elsevier since the 90ties. Our key expert chaired international conferences, lectured on several continents, published a book on Reliability and Security of Nuclear Power Plants, contributed to IEEE and PMAPS and published in the Ontario Journal for Public Policy, Canada. She delivered seminars organized by the Power Engineering Society, IEEE plus seminars to power companies worldwide, including Oman, Thailand, Saudi Arabia, Malaysia, Indonesia, Portugal, South Africa, Japan, Romania, and Guyana.</span></p>
<p><span>Our Key expert delivered over 60 specialized seminars to executives and engineers from Canada, Europe, South and North America, Middle East, South East Asia and Japan. Few examples are:</span></p>
<ul>
<li><span>Modern Power System in Digital Utilities - The Energy Commission, Malaysia and utilities in the Middle East, GCCIA, June 2020</span></li>
<li><span>Assessment of OETC Control Centre, Oman, December 2019</span></li>
<li><span>Demand Side management, Load Forecasting in a Smart Grid, Oman, 2019</span></li>
<li><span>Renewable Resources in a Smart Grid (Malaysia, Thailand, Indonesia, GCCIA, Saudi Arabia)</span></li>
<li><span>The Modern Power System: Impact of the Power Electronics on the Power System</span></li>
<li><span>The Digital Utility, AI and Blockchain</span></li>
<li><span>Smart Grid and Reliability of Distribution Systems, Cyme, Montreal, Canada</span></li>
<li><span>Economic Dispatch in the context of an Energy Market (TNB, Sarawak Energy, Malaysia)</span></li>
<li><span>Energy Markets, Risk Assessment and Financial Management, PES, IEEE: Chicago, San Francisco, New York, Portugal, South Africa, Japan. Provided training at CEO and CRO level.</span></li>
<li><span>Enterprise Risk methodology, EDP, Portugal</span></li>
<li><span>Energy Markets: Saudi Electricity Company, Tenaga National Berhad, Malaysia</span></li>
<li><span>Reliability Centre Maintenance (South East Asia, Saudi Electricity Company, KSA)</span></li>
<li><span>EUSN, ENERGY &amp; UTILITIES SECTOR NETWORK, Government of Canada, 2016</span></li>
<li><span>Connected+, IOT, Toronto, Canada September 2016 and 2015</span></li>
<li><span>Smart Grid, Smart Home HomeConnect, Toronto, Canada November 2014</span></li>
<li><span>Wind Power: a Cautionary Tale, Ontario Centre for Public Policy, 2010</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Load Forecasting & Methodology

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);">This is the perfect launch pad for a technical career in Cyber Security and fully prepares every delegate for the prestigious Certified Ethical Hacking (CEH) Course that comes next on the Cyber &amp; Hacking Learning Pathways by Nemstar. The Certified Network Defender (CND) certification program focuses on creating Network Administrators who are trained on protecting, detecting and responding to the threats on modern networks.</span></p><div style="color: rgb(98, 98, 98); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">Description</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Get to grips with attacks that hackers use against you and learn about the controls you can deploy to protect your systems. You will learn how to protect, detect and respond to the network attacks during this technical cyber workshop. Explore and learn about network defence, network security controls, protocols, perimeter appliances, IDS, IPS, VPN and firewalls. Deep dive into the intricacies of network traffic signature analysis as we rip apart the TCP/IP protocol stack. &nbsp;Learn about Business Continuity &amp; Disaster Recovery and how to support business requirements.</p></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">Exam</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course prepares delegates for the EC-Council CND exam 312-38.</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Number of Questions: 100</li><li fr-original-style="" style="box-sizing: border-box;">Test Duration: 4 Hours</li><li fr-original-style="" style="box-sizing: border-box;">Test Format: Multiple Choice</li><li fr-original-style="" style="box-sizing: border-box;">Test Cost: 1 Exam voucher included with the course</li><li fr-original-style="" style="box-sizing: border-box;">Practice Questions: Included with the course</li></ul></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">Outline</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network &amp; Defence Fundamentals.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Security Threats</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;Vulnerabilities, and Attacks.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Security Controls &amp; Protocols.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Security Policy.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Physical Security.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Host Security.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Firewall Configuration and Management.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">IDS Configuration and Management.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">VPN Configuration and Management.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Wireless Network defence.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Traffic Monitoring and Analysis.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Risk and Vulnerability Management.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Data Backup and Recovery.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Network Incident Response and Management</p></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">Overview</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To equip the delegates with skills that will help to prevent successful attacks, detect those that are successful and foster a culture of resiliency and continuity of operations during attacks. The CND course prepares candidates for the EC Council CND exam, an internationally recognized cyber security certification which is included as part of the course!</p></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">The Programme</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">5 Days classroom + 2 hours self-study each evening</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Classroom based, instructor led workshop with exam included&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Official EC Council CND electronic courseware, membership of Aspen cyber portal, practice exam questions, writing materials &amp; 1 exam voucher are all provided as part of the course.</p></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(126, 121, 125); box-sizing: border-box;" fr-original-style=" color: rgb(126, 121, 125);">Prerequisites</h3><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">IT Systems administration experience, equivalent of CompTIA &nbsp;A+ or CompTIA Server+. Understanding of networking and TCP/IP, equivalent of CompTIA Network+. It is strongly recommended that delegates have fundamental security experience, equivalent of CISMP or CISSP.</p></div>

Nemstar Ltd

This is the perfect launch pad for a technical career in Cyber Security and fully prepares every delegate for the prestigious Certified Ethical Hacking (CEH) Course that comes next on the Cyber & Hacking Learning Pathways by Nemstar.

CND - EC Council Official Certified Network Defender

Packt

Selenium

Learn BDD with SpecFlow (based on Gherkin) and Selenium WebDriver with C# alongwith an Intro to UnitTesting and TDD with TestStack.White

Automate Application with Specflow and Selenium WebDriver C#

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

<div id="course-pills-1">Duration<p>4 Days</p><p>24 CPD hours</p>This course is intended for<p>This course is designed for the aspiring or sitting upper-level manager striving to advance his or her career by learning to apply their existing deep technical knowledge to business problems.</p><p>In this course, students will learn in-depth content in each of the 5 CCISO Domains</p></div><div id="course-pills-2"><h4>Domain 01 - Governance</h4><ul><li>Define, Implement, Manage, and Maintain an Information Security Governance Program</li><li>Information Security Drivers</li><li>Establishing an information security management structure</li><li>Laws/Regulations/Standards as drivers of Organizational Policy/Standards/Procedures</li><li>Managing an enterprise information security compliance program</li><li>Risk Management</li><li>Risk mitigation, risk treatment, and acceptable risk</li><li>Risk management frameworks</li><li>NIST</li><li>Other Frameworks and Guidance (ISO 31000, TARA, OCTAVE, FAIR, COBIT, and ITIL)</li><li>Risk management plan implementation</li><li>Ongoing third-party risk management</li><li>Risk management policies and processes</li><li>Conclusion</li></ul><h4>Domain 2 - Security Risk Management, Controls, &amp; Audit Management</h4><ul><li>INFORMATION SECURITY CONTROLS</li><li>COMPLIANCE MANAGEMENT</li><li>GUIDELINES, GOOD AND BEST PRACTICES</li><li>AUDIT MANAGEMENT</li><li>SUMMARY</li></ul><h4>Domain 03 - Security Program Management and Operations</h4><ul><li>PROGRAM MANAGEMENT</li><li>OPERATIONS MANAGEMENT</li><li>Summary</li></ul><h4>Domain 04 - Information Security Core Concepts</h4><ul><li>ACCESS CONTROL</li><li>PHYSICAL SECURITY</li><li>NETWORK SECURITY</li><li>ENDPOINT PROTECTION</li><li>APPLICATION SECURITY</li><li>ENCRYPTION TECHNOLOGIES</li><li>VIRTUALIZATION SECURITY</li><li>CLOUD COMPUTING SECURITY</li><li>TRANSFORMATIVE TECHNOLOGIES</li><li>Summary</li></ul><h4>Domain 05 - Strategic Planning, Finance, Procurement and Vendor Management</h4><ul><li>STRATEGIC PLANNING</li><li>Designing, Developing, and Maintaining an Enterprise Information Security Program</li><li>Understanding the Enterprise Architecture (EA)</li><li>FINANCE</li><li>PROCUREMENT</li><li>VENDOR MANAGEMENT</li><li>Summary</li></ul></div>

Certified Cryptocurrency Investigator Course (CCI)

Certificate in Information Security Management Principles (CISMP)

Certified Information Security Manager (CISM)

Cissp

EC-Council Certified Chief Information Security Officer (C|CISO)

<p id="isPasted" style="margin: 0cm; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin: 0cm;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 14px; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif; color: rgb(0, 0, 0);">Course Overview</span></strong></p><p id="isPasted" style="margin: 0cm; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin: 0cm;"><br fr-original-style="" style="box-sizing: border-box;"></p><p id="isPasted" style="margin: 0cm; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin: 0cm;">Teaching
the theory and practise of suicide intervention skills that can be applied in
any professional or personal setting, captured in a one-day event accredited by
City and Guilds of London. We use only the most experienced suicide prevention
trainers to deliver this unique learning experience: for anyone who seeks
greater understanding and confidence to intervene with people at risk of
suicide. </p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"> </span>













The
Suicide First Aid through Understanding Suicide Intervention (SFAUSI) course
gives learners the knowledge and tools to understand that suicide is one of the
most preventable deaths and some basic skills can help someone with thoughts of
suicide stay safe from their thoughts and stay alive.&nbsp;</p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;">Course Content</span></strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">SFAUSI is comprised of 4 parts, each 90 minutes duration. The
programme teaches and practices the skills and knowledge needed to identify
someone who may be thinking about suicide and competently intervene to help
create suicide- safety as a first aid approach.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Part 1&nbsp;</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Introduction to: the day;
     programme; ourselves and suicide prevention </span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Stigma, Survivors of
     bereavement by suicide and the Hidden Toll</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Suicide thoughts and suicide
     behaviour</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Intention of behaviour Versus
     Outcome of behaviour</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Possible Causes of Suicidal
     thoughts</span></li></ul><div fr-original-style="" style="box-sizing: border-box;">Part 2</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Suicide &ndash; the Ripple Effect</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Population-based approach to
     suicide prevention </span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Partnership working</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Working with attitudes and
     values</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">&ldquo;I&rsquo;m so glad you told me&rdquo; -
     Audio visual</span>&nbsp;</li></ul><div fr-original-style="" style="box-sizing: border-box;">Part 3</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Meeting the needs of a person
     who is thinking about suicide</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Suicide-Safety Guide</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Step 1 &ndash; Recognising suicide
     and asking about suicide</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Step 2 &ndash; Understanding
     options </span><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt"><br fr-original-style="" style="box-sizing: border-box;"></span></li></ul><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Part 4</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div id="isPasted" fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" fr-original-class="fr-close-ul" style="box-sizing: border-box;">&nbsp;<span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Step 3 &ndash; Safeguarding suicide</span></span></div></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Suicide-safety and self-care</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">The risk assessment approach</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Suicide and suicide gestures</span></li><li fr-original-style="" style="box-sizing: border-box;"><span style="font-family: Calibri; font-size: 12pt; box-sizing: border-box;" fr-original-style="font-family:Calibri;font-size:12.0pt">Future learning&nbsp;</span></li></ul><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></p><p id="isPasted" style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;">Format</span></strong></span></p><p id="isPasted" style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'>






</p><p style="margin: 0in; font-family: Calibri; font-size: 12pt; color: black; box-sizing: border-box;" fr-original-style="margin:0in;font-family:Calibri;font-size:12.0pt;color:black">Taught
over 6 hours using tutor facilitated Socratic learning, tutor-led practise
session, mini lectures, group work and audio-visual presentations. This is a
highly interactive and emotionally engaging learning experience.&nbsp;</p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;">Pre-training requirement</span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;">No previous experience or training is necessary. Participants will be asked to self-reflect and empathise with a person having thoughts of suicide. There is no expectation on participants to share personal experiences.&nbsp;</span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;">Who should attend?&nbsp;</span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;">Multi-sector managers and practitioners including health, housing, social care, education, criminal justice, call centre operators, private, voluntary and public sector workers and community groups or members.&nbsp;</span></p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'><span style="font-size: 14px; font-family: Calibri, sans-serif; box-sizing: border-box;" fr-original-style="font-size: 14px; font-family: Calibri, sans-serif;"><br fr-original-style="" style="box-sizing: border-box;"></span></p><p style="margin: 0in; font-family: Calibri; font-size: 12pt; color: black; box-sizing: border-box;" fr-original-style="margin:0in;font-family:Calibri;font-size:12.0pt;color:black"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Accreditation</strong>
</p><p style="margin: 0in; font-family: Calibri; font-size: 12pt; color: black; box-sizing: border-box;" fr-original-style="margin:0in;font-family:Calibri;font-size:12.0pt;color:black">&nbsp;</p><p style='font-size: medium; font-family: "Times New Roman", serif; margin: 0cm; color: rgb(0, 0, 0); box-sizing: border-box;' fr-original-style='margin-right:0cm;margin-left:0cm;font-size: medium;font-family:"Times New Roman",serif;margin:0cm;margin-top: 0cm;margin-bottom: 0cm;color: rgb(0, 0, 0);'>













</p><p style="margin: 0in; font-family: Calibri; font-size: 12pt; color: black; box-sizing: border-box;" fr-original-style="margin:0in;font-family:Calibri;font-size:12.0pt;color:black">Participants
can choose to register for the City and Guilds accredited unit of learning for
an additional fee of &pound;85 per person. This involves completion of a written
assignment. </p>

Course Overview


Teaching
the theory and practise of suicide intervention skills that can be applied in
any professional or personal setting, captured in a one-day event accredited by
City and Guilds of London. We use only the most experienced suicide prevention
trainers to deliver this unique learning experience: for anyone who seeks
greater understanding and confidence to intervene with people at risk of
suicide. 
   The
Suicide First Aid through Understanding Suicide Intervention (SFAUSI) course
gives learners the knowledge and tools to understand that suicide is one of the
most preventable deaths and some basic skills can help someone with thoughts of
suicide stay safe from their thoughts and stay alive. 


Course Content
SFAUSI is comprised of 4 parts, each 90 minutes duration. The
programme teaches and practices the skills and knowledge needed to identify
someone who may be thinking about suicide and competently intervene to help
create suicide- safety as a first aid approach. 
Part 1 
Introduction to: the day; programme; ourselves and suicide prevention
Stigma, Survivors of bereavement by suicide and the Hidden Toll
Suicide thoughts and suicide behaviour
Intention of behaviour Versus Outcome of behaviour
Possible Causes of Suicidal thoughts
Part 2
Suicide – the Ripple Effect
Population-based approach to suicide prevention
Partnership working
Working with attitudes and values
“I’m so glad you told me” - Audio visual
Part 3
Meeting the needs of a person who is thinking about suicide
Suicide-Safety Guide
Step 1 – Recognising suicide and asking about suicide
Step 2 – Understanding options
Part 4
Step 3 – Safeguarding suicide
Suicide-safety and self-care
The risk assessment approach
Suicide and suicide gestures
Future learning


Format


 
Taught
over 6 hours using tutor facilitated Socratic learning, tutor-led practise
session, mini lectures, group work and audio-visual presentations. This is a
highly interactive and emotionally engaging learning experience. 


Pre-training requirement


No previous experience or training is necessary. Participants will be asked to self-reflect and empathise with a person having thoughts of suicide. There is no expectation on participants to share personal experiences. 


Who should attend? 


Multi-sector managers and practitioners including health, housing, social care, education, criminal justice, call centre operators, private, voluntary and public sector workers and community groups or members. 


Accreditation

 
  
Participants
can choose to register for the City and Guilds accredited unit of learning for
an additional fee of £85 per person. This involves completion of a written
assignment. 

Changing Minds Training

Suicide First Aid

Public Suicide First Aid through Understanding Suicide Intervention (SFAUSI)

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.</p>Overview<p>After completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centre</p><p>The course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</p></div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls<br />Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions<br />Applicable standards<br />Raised Floor guidelines<br />Signal Reference Grid, grounding of racks<br />Disability act and regulations<br />Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards<br />Light fixture types and placement<br />Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level<br />ATS and STS systems<br />Redundancy levels and techniques<br />Three-phase and single-phase usage<br />Power distribution options within the computer room<br />Power cabling versus bus bar trunking<br />Bonding versus grounding<br />Common Mode Noise and isolation transformers<br />Distribution boards, form factors and IP-protection grades<br />Power quality guidelines<br />Real power versus apparent power<br />How to size and calculate load in the data centre Generators<br />Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option<br />Battery types, correct selection and testing<br />Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements<br />Sources of EMF<br />Effects of EMF on human health and equipment<br />(H)EMP<br />Standards<br />EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria<br />Security considerations<br />Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations<br />Cooling measurement units and conversion rates<br />Sensible and latent heat definitions<br />Differences between comfort and precision cooling<br />Overview of different air conditioner technologies<br />Raised floor versus non-raised floor cooling<br />Placement of air conditioner units and limitations to be observed<br />Supplemental cooling options<br />Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas<br />Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System<br />Planning considerations<br />Copper and Fiber cable technology and standards<br />ANSI/TIA-942 Cabling hierarchy and recommendations<br />Testing and verification<br />SAN storage cabling<br />Network redundancy<br />Building-to-building connectivity<br />Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression<br />Detection systems<br />Various total flooding fire suppression techniques and systems, their benefits and disadvantages<br />Handheld extinguishers<br />Signage and safety<br />Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements<br />EMS versus BMS<br />Water leak detection systems<br />Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers<br />Physical, infrastructure and organisational security<br />Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme<br />Recommended labelling practices<br />Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation<br />Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions<br />Calculation models<br />The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certified Cloud Security Professional (CCSP)

AWS Certified Cloud Practitioner

Certified Data Centre Professional (CDCP)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Be it a career change, an exciting new hobby, perfecting existing skills or simply enhancing professional employment prospects&ndash; we help you unlock creativity through our industry aligned all-encompassing Graphic Design Course.</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">" Having done my level 1 and level 2 in graphic design, I felt that I still had gaps in my knowledge and I wasn&#39;t comfortable with what I knew. I signed up with Blue Sky Graphics and I am really glad I did. I am definitely better now than when I started and this is all thanks to my tutor and Blue Sky Graphics 🙂 "</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section data-id="a1c66d1" data-element_type="section" data-settings='{"background_background":"classic"}' style="color: rgb(74, 74, 74); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(74, 74, 74);"><div data-id="a6cdb97" data-element_type="column" fr-original-style="" style="box-sizing: border-box;"><div data-id="adfa4f2" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">A Comprehensive Advanced Course</strong></p></div><div data-id="8058df1" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The graphic design course is a structured academic and industry aligned advanced course suitable for complete beginners, intermediates or those wanting to improve their existing skill set. The graphic design course is comprehensive and through our teaching methodology is designed to train participants to become professional Graphic Designers. There is an emphasis on corporate illustration, composition, painting and logos as well as advertisement designs while focusing on vectors, lines, features, shapes, and spaces. All this will be integrated into how graphic elements are printed after they are processed in graphic design software for the purpose of visually illustrating emotions and messages.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">During the course you will be exposed to:&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">advertisements, magazines, newspapers, corporate graphic designs particular to company cultures and brand identity, stationery, letterheads, business cards, logos, books, packaging and much more.</strong></p></div><div data-id="68acc2a" data-element_type="widget" data-widget_type="image.default" fr-original-style="" style="box-sizing: border-box;"><img width="1024" height="692" alt="" data-srcset="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp 1024w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-300x203.webp 300w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-768x519.webp 768w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456.webp 1440w" data-src="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp" data-sizes="(max-width: 1024px) 100vw, 1024px" src="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp" sizes="(max-width: 1024px) 100vw, 1024px" srcset="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp 1024w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-300x203.webp 300w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-768x519.webp 768w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456.webp 1440w" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div><div data-id="e3de655" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The graphic design course teaches you to understand and learn how to operate a labyrinthine yet amazing world of Adobe software. With this software we explore the uses of words, shapes, textures, forms, sizes and colours to communicate by combining ideas and images to make a new concept. Graphic design through common misconception is not just about layout and typography, but much more about ideas behind visual meaning. Graphic design can make a company more successful in the world if it makes communication smart, attractive and able to captivate its audience. Graphic design can effectively be used by businesses to make (or break) their brand identity, increase sales, promote web traffic or promote services and products through advertising on their websites to convey complex data to its readers in a clear way.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Elements of graphic design include:&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Colour, Size, Texture, Line, Shape, Space and, Form</strong>. It is important that each element is understood correctly, and this is one of the key principles we teach on our graphic design course. In other terms, graphic design communicates certain ideas or messages through visuals. These visuals can be as simple as a business logo, or as complex as pages of web design. This course goes beyond just the practical side of graphic design and includes the theory and substance behind modern graphic design.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Your teacher will guide you on:</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What salary you can expect at the start of your career?<br fr-original-style="" style="box-sizing: border-box;">How to get new clients for your business for freelance designers ?<br fr-original-style="" style="box-sizing: border-box;">How to find work for the new graphic designer starting out in the big world?<br fr-original-style="" style="box-sizing: border-box;">How to quickly integrate into the graphic design field?<br fr-original-style="" style="box-sizing: border-box;">How to combine working from home versus working at a studio ?</p></div><div data-id="9eeb2d6" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></div></div></section><section data-id="9dd6ca4" data-element_type="section" data-settings='{"background_background":"classic"}' style="color: rgb(74, 74, 74); box-sizing: border-box;" fr-original-style=" color: rgb(74, 74, 74);"><div data-id="c7b1c39" data-element_type="column" data-settings='{"background_background":"classic"}' fr-original-style="" style="box-sizing: border-box;"><div data-id="d1226d1" data-element_type="widget" data-widget_type="heading.default" fr-original-style="" style="box-sizing: border-box;"><h2 style="color: rgb(44, 132, 238); box-sizing: border-box;" fr-original-style=" color: rgb(44, 132, 238);">Begin one-to-one online learning with your very own private tutor</h2></div></div></section><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><img src="https://images.cademy.co.uk/0832ed64-c289-46fe-8a61-ae4fb9d9c688/14e85caa-6eee-4593-8ec3-48bdfc839153/original.webp" style="width: 698px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 698px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"></p><div data-id="833cc17" data-element_type="widget" data-widget_type="heading.default" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-id="833cc17" data-element_type="widget" data-widget_type="heading.default" style="color: rgb(74, 74, 74); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(74, 74, 74);"><h2 style="color: rgb(33, 33, 33); box-sizing: border-box;" fr-original-style=" color: rgb(33, 33, 33);">Interested?</h2></div><div data-id="63ead7e" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(12, 12, 12); box-sizing: border-box;" fr-original-style=" color: rgb(12, 12, 12);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Our course is 7 months long, consisting of 1 hour 30 minutes of online one-to-one sessions. When you enrol at Blue Sky Graphics expect at least 90 minutes of class sessions and 2 &ndash; 4 hours of homework per week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">If we accommodate the course delivery into a shorter time frame, (for e.g. over 4 months instead of 7 months the Flexi 3 doubles from &pound;265.00 to &pound;450.00 over 4 months) the instalment is billed at the delivery rate.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The cost of traditional schooling is typically more expensive than online courses, but in the end it all comes down to how good the tutors are. With our online courses you can gain skills that are a necessity for graphic design remotely.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">That&rsquo;s right! Learn the skills needed to use Photoshop, Illustrator, InDesign and portfolio!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The online courses cost &pound;1799.00 (VAT inclusive) with no extra hidden costs and there are affordable instalment options too. Pay via debit or credit card or use a payment plan. A deposit of &pound;294.00 is required to secure your position.</p></div></div><div data-id="63ead7e" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(12, 12, 12); box-sizing: border-box;" fr-original-style=" color: rgb(12, 12, 12);"><br fr-original-style="" style="box-sizing: border-box;"></div>

Graphic Design Courses Birmingham

Graphic Design

GRAPHIC DESIGN COURSE

<div id="course-pills-1">Duration<p>4 Days</p><p>24 CPD hours</p>This course is intended for<p></p><p>The Microsoft Security Operations Analyst collaborates with organizational stakeholders to secure information technology systems for the organization. Their goal is to reduce organizational risk by rapidly remediating active attacks in the environment, advising on improvements to threat protection practices, and referring violations of organizational policies to appropriate stakeholders. Responsibilities include threat management, monitoring, and response by using a variety of security solutions across their environment. The role primarily investigates, responds to, and hunts for threats using Microsoft Sentinel, Microsoft Defender for Cloud, Microsoft 365 Defender, and third-party security products. Since the Security Operations Analyst consumes the operational output of these tools, they are also a critical stakeholder in the configuration and deployment of these technologies.</p><p></p><p></p><p>Learn how to investigate, respond to, and hunt for threats using Microsoft Sentinel, Microsoft Defender for Cloud, and Microsoft 365 Defender. In this course you will learn how to mitigate cyberthreats using these technologies. Specifically, you will configure and use Microsoft Sentinel as well as utilize Kusto Query Language (KQL) to perform detection, analysis, and reporting. The course was designed for people who work in a Security Operations job role and helps learners prepare for the exam SC-200: Microsoft Security Operations Analyst.</p><p></p>Prerequisites<p></p><li>Basic understanding of Microsoft 365</li>  <li>Fundamental understanding of Microsoft security, compliance, and identity products</li>   <li> Intermediate understanding of Windows 10</li>  <li> Familiarity with Azure services, specifically Azure SQL Database and Azure Storage</li>   <li> Familiarity with Azure virtual machines and virtual networking</li>   <li>Basic understanding of scripting concepts.</li><p></p></div><div id="course-pills-2"><h3>1 - Introduction to Microsoft 365 threat protection</h3> <ul> <li>Explore Extended Detection &amp; Response (XDR) response use cases</li> <li>Understand Microsoft Defender XDR in a Security Operations Center (SOC)</li> <li>Explore Microsoft Security Graph</li> <li>Investigate security incidents in Microsoft Defender XDR</li> </ul> <h3>2 - Mitigate incidents using Microsoft 365 Defender</h3> <ul> <li>Use the Microsoft Defender portal</li> <li>Manage incidents</li> <li>Investigate incidents</li> <li>Manage and investigate alerts</li> <li>Manage automated investigations</li> <li>Use the action center</li> <li>Explore advanced hunting</li> <li>Investigate Microsoft Entra sign-in logs</li> <li>Understand Microsoft Secure Score</li> <li>Analyze threat analytics</li> <li>Analyze reports</li> <li>Configure the Microsoft Defender portal</li> </ul> <h3>3 - Protect your identities with Microsoft Entra ID Protection</h3> <ul> <li>Microsoft Entra ID Protection overview</li> <li>Detect risks with Microsoft Entra ID Protection policies</li> <li>Investigate and remediate risks detected by Microsoft Entra ID Protection</li> </ul> <h3>4 - Remediate risks with Microsoft Defender for Office 365</h3> <ul> <li>Automate, investigate, and remediate</li> <li>Configure, protect, and detect</li> <li>Simulate attacks</li> </ul> <h3>5 - Safeguard your environment with Microsoft Defender for Identity</h3> <ul> <li>Configure Microsoft Defender for Identity sensors</li> <li>Review compromised accounts or data</li> <li>Integrate with other Microsoft tools</li> </ul> <h3>6 - Secure your cloud apps and services with Microsoft Defender for Cloud Apps</h3> <ul> <li>Understand the Defender for Cloud Apps Framework</li> <li>Explore your cloud apps with Cloud Discovery</li> <li>Protect your data and apps with Conditional Access App Control</li> <li>Walk through discovery and access control with Microsoft Defender for Cloud Apps</li> <li>Classify and protect sensitive information</li> <li>Detect Threats</li> </ul> <h3>7 - Respond to data loss prevention alerts using Microsoft 365</h3> <ul> <li>Describe data loss prevention alerts</li> <li>Investigate data loss prevention alerts in Microsoft Purview</li> <li>Investigate data loss prevention alerts in Microsoft Defender for Cloud Apps</li> </ul> <h3>8 - Manage insider risk in Microsoft Purview</h3> <ul> <li>Insider risk management overview</li> <li>Create and manage insider risk policies</li> <li>Investigate insider risk alerts</li> <li>Take action on insider risk alerts through cases</li> <li>Manage insider risk management forensic evidence</li> <li>Create insider risk management notice templates</li> </ul> <h3>9 - Investigate threats by using audit features in Microsoft Defender XDR and Microsoft Purview Standard</h3> <ul> <li>Explore Microsoft Purview Audit solutions</li> <li>Implement Microsoft Purview Audit (Standard)</li> <li>Start recording activity in the Unified Audit Log</li> <li>Search the Unified Audit Log (UAL)</li> <li>Export, configure, and view audit log records</li> <li>Use audit log searching to investigate common support issues</li> </ul> <h3>10 - Investigate threats using audit in Microsoft Defender XDR and Microsoft Purview (Premium)</h3> <ul> <li>Explore Microsoft Purview Audit (Premium)</li> <li>Implement Microsoft Purview Audit (Premium)</li> <li>Manage audit log retention policies</li> <li>Investigate compromised email accounts using Purview Audit (Premium)</li> </ul> <h3>11 - Investigate threats with Content search in Microsoft Purview</h3> <ul> <li>Explore Microsoft Purview eDiscovery solutions</li> <li>Create a content search</li> <li>View the search results and statistics</li> <li>Export the search results and search report</li> <li>Configure search permissions filtering</li> <li>Search for and delete email messages</li> </ul> <h3>12 - Protect against threats with Microsoft Defender for Endpoint</h3> <ul> <li>Practice security administration</li> <li>Hunt threats within your network</li> </ul> <h3>13 - Deploy the Microsoft Defender for Endpoint environment</h3> <ul> <li>Create your environment</li> <li>Understand operating systems compatibility and features</li> <li>Onboard devices</li> <li>Manage access</li> <li>Create and manage roles for role-based access control</li> <li>Configure device groups</li> <li>Configure environment advanced features</li> </ul> <h3>14 - Implement Windows security enhancements with Microsoft Defender for Endpoint</h3> <ul> <li>Understand attack surface reduction</li> <li>Enable attack surface reduction rules</li> </ul> <h3>15 - Perform device investigations in Microsoft Defender for Endpoint</h3> <ul> <li>Use the device inventory list</li> <li>Investigate the device</li> <li>Use behavioral blocking</li> <li>Detect devices with device discovery</li> </ul> <h3>16 - Perform actions on a device using Microsoft Defender for Endpoint</h3> <ul> <li>Explain device actions</li> <li>Run Microsoft Defender antivirus scan on devices</li> <li>Collect investigation package from devices</li> <li>Initiate live response session</li> </ul> <h3>17 - Perform evidence and entities investigations using Microsoft Defender for Endpoint</h3> <ul> <li>Investigate a file</li> <li>Investigate a user account</li> <li>Investigate an IP address</li> <li>Investigate a domain</li> </ul> <h3>18 - Configure and manage automation using Microsoft Defender for Endpoint</h3> <ul> <li>Configure advanced features</li> <li>Manage automation upload and folder settings</li> <li>Configure automated investigation and remediation capabilities</li> <li>Block at risk devices</li> </ul> <h3>19 - Configure for alerts and detections in Microsoft Defender for Endpoint</h3> <ul> <li>Configure advanced features</li> <li>Configure alert notifications</li> <li>Manage alert suppression</li> <li>Manage indicators</li> </ul> <h3>20 - Utilize Vulnerability Management in Microsoft Defender for Endpoint</h3> <ul> <li>Understand vulnerability management</li> <li>Explore vulnerabilities on your devices</li> <li>Manage remediation</li> </ul> <h3>21 - Plan for cloud workload protections using Microsoft Defender for Cloud</h3> <ul> <li>Explain Microsoft Defender for Cloud</li> <li>Describe Microsoft Defender for Cloud workload protections</li> <li>Enable Microsoft Defender for Cloud</li> </ul> <h3>22 - Connect Azure assets to Microsoft Defender for Cloud</h3> <ul> <li>Explore and manage your resources with asset inventory</li> <li>Configure auto provisioning</li> <li>Manual log analytics agent provisioning</li> </ul> <h3>23 - Connect non-Azure resources to Microsoft Defender for Cloud</h3> <ul> <li>Protect non-Azure resources</li> <li>Connect non-Azure machines</li> <li>Connect your AWS accounts</li> <li>Connect your GCP accounts</li> </ul> <h3>24 - Manage your cloud security posture management?</h3> <ul> <li>Explore Secure Score</li> <li>Explore Recommendations</li> <li>Measure and enforce regulatory compliance</li> <li>Understand Workbooks</li> </ul> <h3>25 - Explain cloud workload protections in Microsoft Defender for Cloud</h3> <ul> <li>Understand Microsoft Defender for servers</li> <li>Understand Microsoft Defender for App Service</li> <li>Understand Microsoft Defender for Storage</li> <li>Understand Microsoft Defender for SQL</li> <li>Understand Microsoft Defender for open-source databases</li> <li>Understand Microsoft Defender for Key Vault</li> <li>Understand Microsoft Defender for Resource Manager</li> <li>Understand Microsoft Defender for DNS</li> <li>Understand Microsoft Defender for Containers</li> <li>Understand Microsoft Defender additional protections</li> </ul> <h3>26 - Remediate security alerts using Microsoft Defender for Cloud</h3> <ul> <li>Understand security alerts</li> <li>Remediate alerts and automate responses</li> <li>Suppress alerts from Defender for Cloud</li> <li>Generate threat intelligence reports</li> <li>Respond to alerts from Azure resources</li> </ul> <h3>27 - Construct KQL statements for Microsoft Sentinel</h3> <ul> <li>Understand the Kusto Query Language statement structure</li> <li>Use the search operator</li> <li>Use the where operator</li> <li>Use the let statement</li> <li>Use the extend operator</li> <li>Use the order by operator</li> <li>Use the project operators</li> </ul> <h3>28 - Analyze query results using KQL</h3> <ul> <li>Use the summarize operator</li> <li>Use the summarize operator to filter results</li> <li>Use the summarize operator to prepare data</li> <li>Use the render operator to create visualizations</li> </ul> <h3>29 - Build multi-table statements using KQL</h3> <ul> <li>Use the union operator</li> <li>Use the join operator</li> </ul> <h3>30 - Work with data in Microsoft Sentinel using Kusto Query Language</h3> <ul> <li>Extract data from unstructured string fields</li> <li>Extract data from structured string data</li> <li>Integrate external data</li> <li>Create parsers with functions</li> </ul> <h3>31 - Introduction to Microsoft Sentinel</h3> <ul> <li>What is Microsoft Sentinel?</li> <li>How Microsoft Sentinel works</li> <li>When to use Microsoft Sentinel</li> </ul> <h3>32 - Create and manage Microsoft Sentinel workspaces</h3> <ul> <li>Plan for the Microsoft Sentinel workspace</li> <li>Create a Microsoft Sentinel workspace</li> <li>Manage workspaces across tenants using Azure Lighthouse</li> <li>Understand Microsoft Sentinel permissions and roles</li> <li>Manage Microsoft Sentinel settings</li> <li>Configure logs</li> </ul> <h3>33 - Query logs in Microsoft Sentinel</h3> <ul> <li>Query logs in the logs page</li> <li>Understand Microsoft Sentinel tables</li> <li>Understand common tables</li> <li>Understand Microsoft Defender XDR tables</li> </ul> <h3>34 - Use watchlists in Microsoft Sentinel</h3> <ul> <li>Plan for watchlists</li> <li>Create a watchlist</li> <li>Manage watchlists</li> </ul> <h3>35 - Utilize threat intelligence in Microsoft Sentinel</h3> <ul> <li>Define threat intelligence</li> <li>Manage your threat indicators</li> <li>View your threat indicators with KQL</li> </ul> <h3>36 - Connect data to Microsoft Sentinel using data connectors</h3> <ul> <li>Ingest log data with data connectors</li> <li>Understand data connector providers</li> <li>View connected hosts</li> </ul> <h3>37 - Connect Microsoft services to Microsoft Sentinel</h3> <ul> <li>Plan for Microsoft services connectors</li> <li>Connect the Microsoft Office 365 connector</li> <li>Connect the Microsoft Entra connector</li> <li>Connect the Microsoft Entra ID Protection connector</li> <li>Connect the Azure Activity connector</li> </ul> <h3>38 - Connect Microsoft Defender XDR to Microsoft Sentinel</h3> <ul> <li>Plan for Microsoft Defender XDR connectors</li> <li>Connect the Microsoft Defender XDR connector</li> <li>Connect Microsoft Defender for Cloud connector</li> <li>Connect Microsoft Defender for IoT</li> <li>Connect Microsoft Defender legacy connectors</li> </ul> <h3>39 - Connect Windows hosts to Microsoft Sentinel</h3> <ul> <li>Plan for Windows hosts security events connector</li> <li>Connect using the Windows Security Events via AMA Connector</li> <li>Connect using the Security Events via Legacy Agent Connector</li> <li>Collect Sysmon event logs</li> </ul> <h3>40 - Connect Common Event Format logs to Microsoft Sentinel</h3> <ul> <li>Plan for Common Event Format connector</li> <li>Connect your external solution using the Common Event Format connector</li> </ul> <h3>41 - Connect syslog data sources to Microsoft Sentinel</h3> <ul> <li>Plan for syslog data collection</li> <li>Collect data from Linux-based sources using syslog</li> <li>Configure the Data Collection Rule for Syslog Data Sources</li> <li>Parse syslog data with KQL</li> </ul> <h3>42 - Connect threat indicators to Microsoft Sentinel</h3> <ul> <li>Plan for threat intelligence connectors</li> <li>Connect the threat intelligence TAXII connector</li> <li>Connect the threat intelligence platforms connector</li> <li>View your threat indicators with KQL</li> </ul> <h3>43 - Threat detection with Microsoft Sentinel analytics</h3> <ul> <li>What is Microsoft Sentinel Analytics?</li> <li>Types of analytics rules</li> <li>Create an analytics rule from templates</li> <li>Create an analytics rule from wizard</li> <li>Manage analytics rules</li> </ul> <h3>44 - Automation in Microsoft Sentinel</h3> <ul> <li>Understand automation options</li> <li>Create automation rules</li> </ul> <h3>45 - Threat response with Microsoft Sentinel playbooks</h3> <ul> <li>What are Microsoft Sentinel playbooks?</li> <li>Trigger a playbook in real-time</li> <li>Run playbooks on demand</li> </ul> <h3>46 - Security incident management in Microsoft Sentinel</h3> <ul> <li>Understand incidents</li> <li>Incident evidence and entities</li> <li>Incident management</li> </ul> <h3>47 - Identify threats with Behavioral Analytics</h3> <ul> <li>Understand behavioral analytics</li> <li>Explore entities</li> <li>Display entity behavior information</li> <li>Use Anomaly detection analytical rule templates</li> </ul> <h3>48 - Data normalization in Microsoft Sentinel</h3> <ul> <li>Understand data normalization</li> <li>Use ASIM Parsers</li> <li>Understand parameterized KQL functions</li> <li>Create an ASIM Parser</li> <li>Configure Azure Monitor Data Collection Rules</li> </ul> <h3>49 - Query, visualize, and monitor data in Microsoft Sentinel</h3> <ul> <li>Monitor and visualize data</li> <li>Query data using Kusto Query Language</li> <li>Use default Microsoft Sentinel Workbooks</li> <li>Create a new Microsoft Sentinel Workbook</li> </ul> <h3>50 - Manage content in Microsoft Sentinel</h3> <ul> <li>Use solutions from the content hub</li> <li>Use repositories for deployment</li> </ul> <h3>51 - Explain threat hunting concepts in Microsoft Sentinel</h3> <ul> <li>Understand cybersecurity threat hunts</li> <li>Develop a hypothesis</li> <li>Explore MITRE ATT&amp;CK</li> </ul> <h3>52 - Threat hunting with Microsoft Sentinel</h3> <ul> <li>Explore creation and management of threat-hunting queries</li> <li>Save key findings with bookmarks</li> <li>Observe threats over time with livestream</li> </ul> <h3>53 - Use Search jobs in Microsoft Sentinel</h3> <ul> <li>Hunt with a Search Job</li> <li>Restore historical data</li> </ul> <h3>54 - Hunt for threats using notebooks in Microsoft Sentinel</h3> <ul> <li>Access Azure Sentinel data with external tools</li> <li>Hunt with notebooks</li> <li>Create a notebook</li> <li>Explore notebook code</li> </ul></div>

Microsoft Certification

Microsoft AZ-900

Microsoft AZ-104

Microsoft SC-200

Microsoft AZ-303

Microsoft AZ-700

SC-200T00 Microsoft Security Operations Analyst

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks. The job roles best suited to the material in this course are:<br />Entry-level network engineer<br />Network administrator<br />Network support technician<br />Help desk technician</p>Overview<p>This course will help you:<br />Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network<br />Gain a foundation in the essentials of networking, security, and automation<br />Earn 30 CE credits toward recertification</p><p>The Implementing and Administering Cisco Solutions (CCNA) v2.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. This course helps you prepare to take the 200-301 CiscoÂ© Certified Network Associate (CCNAÂ©) exam. By passing this one exam, you earn the CCNA certification. This course also earns you 30 Continuing Education (CE) credits towards recertification.</p></div><div id="course-pills-2"><h4>Course Outline </h4><ul><li>Exploring the Functions of Networking ? Lecture</li><li>Introducing the Host-to-Host Communications Model ? Lecture</li><li>Operating Cisco IOS Software ? Lecture</li><li>Introducing LANs ? Lecture</li><li>Exploring the TCP/IP Link Layer ? Lecture</li><li>Starting a Switch ? Lecture</li><li>Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets ? Lecture</li><li>Explaining the TCP/IP Transport Layer and Application Layer ? Lecture</li><li>Exploring the Functions of Routing ? Lecture</li><li>Configuring a Cisco Router ? Lecture</li><li>Exploring the Packet Delivery Process ? Lecture</li><li>Troubleshooting a Simple Network ? Lecture</li><li>Introducing Basic IPv6 ? Lecture</li><li>Configuring Static Routing ? Lecture</li><li>Implementing VLANs and Trunks ? Lecture</li><li>Routing Between VLANs ? Lecture</li><li>Introducing OSPF ? Lecture</li><li>Building Redundant Switched Topologies ? Self-study</li><li>Improving Redundant Switched Topologies with EtherChannel ? Lecture</li><li>Exploring Layer 3 Redundancy ? Self-study</li><li>Introducing WAN Technologies ? Self-study</li><li>Explaining Basics of ACL ? Lecture</li><li>Enabling Internet Connectivity ? Lecture</li><li>Introducing QoS ? Self-study</li><li>Explaining Wireless Fundamentals ? Self-study</li><li>Introducing Architectures and Virtualization ? Self-study</li><li>Explaining the Evolution of Intelligent Networks ? Lecture</li><li>Introducing System Monitoring ? Lecture</li><li>Managing Cisco Devices ? Lecture</li><li>Examining the Security Threat Landscape ? Self-study</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Cisco Certified Network Associate (CCNA)

Cisco Certified Network Professional certification (CCNP)

CompTIA Network+

Cisco Certified Entry Networking Technician (CCENT)

Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The Certified Ethical Hacking v12 course will significantly benefit security officers, auditors, security professionals, site administrators, and anyone who is concerned about the integrity of the network infrastructure.</p>Overview<p>Information security controls, laws, and standards. Various types of footprinting, footprinting tools, and countermeasures. Network scanning techniques and scanning countermeasures Enumeration techniques and enumeration countermeasures Vulnerability analysis to identify security loopholes in the target organization?s network, communication infrastructure, and end systems. System hacking methodology, steganography, steganalysis attacks, and covering tracks to discover system and network vulnerabilities. Different types of malware (Trojan, Virus, worms, etc.), system auditing for malware attacks, malware analysis, and countermeasures. Packet sniffing techniques to discover network vulnerabilities and countermeasures to defend against sniffing. Social engineering techniques and how to identify theft attacks to audit human-level vulnerabilities and social engineering countermeasures. DoS/DDoS attack techniques and tools to audit a target and DoS/DDoS countermeasures. Session hijacking techniques to discover network-level session management, authentication/authorization, and cryptographic weaknesses and countermeasures. Webserver attacks and a comprehensive attack methodology to audit vulnerabilities in webserver infrastructure, and countermeasures. Web application attacks, comprehensive web application hacking methodology to audit vulnerabilities in web applications, and countermeasures. SQL injection attack techniques, injection detection tools to detect SQL injection attempts, and countermeasures. Wireless encryption, wireless hacking methodology, wireless hacking tools, and Wi-Fi security tools. Mobile platform attack vector, android vulnerability exploitations, and mobile security guidelines and tools. Firewall, IDS and honeypot evasion techniques, evasion tools and techniques to audit a network perimeter for weaknesses, and countermeasures. Cloud computing concepts (Container technology, serverless computing), the working of various threats and attacks, and security techniques and tools. Penetration testing, security audit, vulnerability assessment, and penetration testing roadmap. Threats to IoT and OT platforms and defending IoT and OT devices. Cryptography ciphers, Public Key Infrastructure (PKI), cryptography attacks, and cryptanalysis tools.</p><p>CEH provides an in-depth understanding of ethical hacking phases, various attack vectors, and preventative countermeasures. It will teach you how hackers think and act maliciously so you will be better positioned to setup your security infrastructure and defend against future attacks. An understanding of system weaknesses and vulnerabilities helps organizations strengthen their system security controls to minimize the risk of an incident. CEH was built to incorporate a hands-on environment and systematic process across each ethical hacking domain and methodology, giving you the opportunity to work towards proving the required knowledge and skills needed to achieve the CEH credential. You will be exposed to an entirely different posture toward the responsibilities and measures required to be secure. Now in its 12th version, CEH continues to evolve with the latest operating systems, tools, tactics, exploits, and technologies.</p></div><div id="course-pills-2"><h3>1 - Introduction to Ethical Hacking</h3> <ul> <li>Information Security Overview</li> <li>Cyber Kill Chain Concepts</li> <li>Hacking Concepts</li> <li>Ethical Hacking Concepts</li> <li>Information Security Controls</li> <li>Information Security Laws and Standards</li> </ul> <h3>2 - 2 - Foot-printing and Reconnaissance</h3> <ul> <li>Footprinting Concepts</li> <li>Footprinting through Search Engines</li> <li>Footprinting through Web Services</li> <li>Footprinting through Social Networking Sites</li> <li>Website Footprinting</li> <li>Email Footprinting</li> <li>Who is Footprinting</li> <li>DNS Footprinting</li> <li>Network Footprinting</li> <li>Footprinting through Social Engineering</li> <li>Footprinting Tools</li> <li>Footprinting Countermeasures</li> </ul> <h3>3 - Scanning Networks</h3> <ul> <li>Network Scanning Concepts</li> <li>Scanning Tools</li> <li>Host Discovery</li> <li>Port and Service Discovery</li> <li>OS Discovery (Banner Grabbing/OS Fingerprinting) </li><li>Scanning Beyond IDS and Firewall</li> <li>Draw Network Diagrams</li> </ul> <h3>4 - Enumeration</h3> <ul> <li>Enumeration Concepts</li> <li>NetBIOS Enumeration</li> <li>SNMP Enumeration</li> <li>LDAP Enumeration</li> <li>NTP and NFS Enumeration</li> <li>SMTP and DNS Enumeration</li> <li>Other Enumeration Techniques</li> <li>Enumeration Countermeasures</li> </ul> <h3>5 - Vulnerability Analysis</h3> <ul> <li>Vulnerability Assessment Concepts</li> <li>Vulnerability Classification and Assessment Types</li> <li>Vulnerability Assessment Solutions and Tools</li> <li>Vulnerability Assessment Reports</li> </ul> <h3>6 - System Hacking</h3> <ul> <li>System Hacking Concepts</li> <li>Gaining Access</li> <li>Escalating Privileges</li> <li>Maintaining Access</li> <li>Clearing Logs</li> </ul> <h3>7 - Malware Threats</h3> <ul> <li>Malware Concepts</li> <li>APT Concepts</li> <li>Trojan Concepts</li> <li>Virus and Worm Concepts</li> <li>Fileless Malware Concepts</li> <li>Malware Analysis</li> <li>Countermeasures</li> <li>Anti-Malware Software</li> </ul> <h3>8 - Sniffing</h3> <ul> <li>Sniffing Concepts</li> <li>Sniffing Technique: MAC Attacks</li> <li>Sniffing Technique: DHCP Attacks</li> <li>Sniffing Technique: ARP Poisoning</li> <li>Sniffing Technique: Spoofing Attacks</li> <li>Sniffing Technique: DNS Poisoning</li> <li>Sniffing Tools</li> <li>Countermeasures</li> <li>Sniffing Detection Techniques</li> </ul> <h3>9 - Social Engineering</h3> <ul> <li>Social Engineering Concepts</li> <li>Social Engineering Techniques</li> <li>Insider Threats</li> <li>Impersonation on Social Networking Sites</li> <li>Identity Theft</li> <li>Countermeasures</li> </ul> <h3>10 - Denial-of-Service</h3> <ul> <li>DoS/DDoS Concepts</li> <li>DoS/DDoS Attack Techniques</li> <li>BotnetsDDoS Case Study</li> <li>DoS/DDoS Attack Tools</li> <li>Countermeasures</li> <li>DoS/DDoS Protection Tools</li> </ul> <h3>11 - Session Hijacking</h3> <ul> <li>Session Hijacking Concepts</li> <li>Application Level Session Hijacking</li> <li>Network Level Session Hijacking</li> <li>Session Hijacking Tools</li> <li>Countermeasures</li> </ul> <h3>12 - Evading IDS, Firewalls, and Honeypots</h3> <ul> <li>IDS, IPS, Firewall, and Honeypot Concepts</li> <li>IDS, IPS, Firewall, and Honeypot Solutions</li> <li>Evading IDS</li> <li>Evading Firewalls</li> <li>IDS/Firewall Evading Tools</li> <li>Detecting Honeypots</li> <li>IDS/Firewall Evasion Countermeasures</li> </ul> <h3>13 - Hacking Web Servers</h3> <ul> <li>Web Server Concepts</li> <li>Web Server Attacks</li> <li>Web Server Attack Methodology</li> <li>Web Server Attack Tools</li> <li>Countermeasures</li> <li>Patch Management</li> <li>Web Server Security Tools</li> </ul> <h3>14 - Hacking Web Applications</h3> <ul> <li>Web Application Concepts</li> <li>Web Application Threats</li> <li>Web Application Hacking Methodology</li> <li>Web API, Webhooks, and Web Shell</li> <li>Web Application Security</li> </ul> <h3>15 - SQL Injection</h3> <ul> <li>SQL Injection Concepts</li> <li>Types of SQL Injection</li> <li>SQL Injection Methodology</li> <li>SQL Injection Tools</li> <li>Evasion Techniques</li> <li>Countermeasures</li> </ul> <h3>16 - Hacking Wireless Networks</h3> <ul> <li>Wireless Concepts</li> <li>Wireless Encryption</li> <li>Wireless Threats</li> <li>Wireless Hacking Methodology</li> <li>Wireless Hacking Tools</li> <li>Bluetooth Hacking</li> <li>Countermeasures</li> <li>Wireless Security Tools</li> </ul> <h3>17 - Hacking Mobile Platforms</h3> <ul> <li>Mobile Platform Attack Vectors</li> <li>Hacking Android OS</li> <li>Hacking iOS</li> <li>Mobile Device Management</li> <li>Mobile Security Guidelines and Tools</li> </ul> <h3>18 - IoT and OT Hacking</h3> <ul> <li>IoT Hacking</li> <li>IoT Concepts</li> <li>IoT Attacks</li> <li>IoT Hacking Methodology</li> <li>IoT Hacking Tools</li> <li>Countermeasures</li> <li>OT Hacking</li> <li>OT Concepts</li> <li>OT Attacks</li> <li>OT Hacking Methodology</li> <li>OT Hacking Tools</li> <li>Countermeasures</li> </ul> <h3>19 - Cloud Computing</h3> <ul> <li>Cloud Computing Concepts</li> <li>Container Technology</li> <li>Serverless Computing</li> <li>Cloud Computing Threats</li> <li>Cloud Hacking</li> <li>Cloud Security</li> </ul> <h3>20 - Cryptography</h3> <ul> <li>Cryptography Concepts</li> <li>Encryption Algorithms</li> <li>Cryptography Tools</li> <li>Public Key Infrastructure (PKI) </li><li>Email Encryption</li> <li>Disk Encryption</li> <li>Cryptanalysis</li> <li>Countermeasures</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans EC-Council Certified Ethical Hacker (CEH) v.12 training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the EC-Council Certified Ethical Hacker (CEH) v.12 course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Cyber Security

Certified Ethical Hacker (CEH)

Ethical Hacking

EC-Council Certified Ethical Hacker (CEH) v12

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is for experienced information technology (IT) professionals, typically described as Enterprise Desktop Administrators (EDAs). These EDAs deploy, manage, and maintain PCs, devices, and applications across medium, large, and enterprise organizations. A significant portion of this audience uses, or intends to use, the latest release of Configuration Manager to manage and deploy PCs, devices, and applications.</p>Overview<p>Describe the features Configuration Manager and Intune include, and explain how you can use these features to manage PCs and mobile devices in an enterprise environment. Analyze data by using queries and reports. Prepare a management infrastructure, including configuring boundaries, boundary groups, and resource discovery, and integrating mobile-device management with Intune. Deploy and manage the Configuration Manager client. Configure, manage, and monitor hardware and software inventory, and use Asset Intelligence and software metering. Identify and configure the most appropriate method to distribute and manage content used for deployments. Distribute, deploy, and monitor applications for managed users and systems. Maintain software updates for PCs that Configuration Manager manages. Implement Endpoint Protection for managed PCs. Configure an operating-system deployment strategy by using Configuration Manager. Manage and maintain a Configuration Manager site.</p><p>This five-day course describes how to use Configuration Manager and its associated site systems to efficiently manage network resources. In this five-day course, you will learn day-to-day management tasks, including how to manage applications, client health, hardware and software inventory, operating system deployment, and software updates by using Configuration Manager. You also will learn how to optimize Endpoint Protection, manage compliance, and create management queries and reports.  Although this course and the associated labs are written for Microsoft Endpoint Configuration Manager and Windows 11, the skills taught will also be backwards compatible with previous editions of System Center Configuration Manager and Windows 10.</p>Prerequisites<p></p><li>Networking fundamentals, including common networking protocols, topologies, hardware, media, routing, switching, and addressing.</li>  <li>Active Directory Domain Services (AD DS) principles and fundamentals of AD DS management.</li>  <li>Installation, configuration, and troubleshooting for Windows-based personal computers.</li>  <li>Basic concepts of public key infrastructure (PKI) security.</li>  <li>Basic understanding of scripting and Windows PowerShell syntax.</li>  <li>Basic understanding of Windows Server roles and services.</li>  <li>Basic understanding of the configuration options for iOS and Android Mobile device platforms.</li><p></p></div><div id="course-pills-2"><h3>1 - Managing computers and mobile devices in the enterprise</h3> <ul> <li>Overview of systems management by using enterprise management solutions</li> <li>Overview of the Configuration Manager architecture</li> <li>Overview of the Configuration Manager administrative tools</li> <li>Tools for monitoring and troubleshooting a Configuration Manager site</li> </ul> <h3>2 - Analyzing data using queries, reports, and CMPivot</h3> <ul> <li>Introduction to queries</li> <li>Configuring SQL Server Reporting Services</li> <li>Analyzing the real-time state of a device by using CMPivot</li> </ul> <h3>3 - Preparing the Configuration Manager management infrastructure</h3> <ul> <li>Configuring site boundaries and boundary groups</li> <li>Configuring resource discovery</li> <li>Organizing resources using device and user collections</li> </ul> <h3>4 - Deploying and managing the Configuration Manager client</h3> <ul> <li>Overview of the Configuration Manager client</li> <li>Deploying the Configuration Manager client</li> <li>Configuring and monitoring client status</li> <li>Managing client settings and performing management operations</li> </ul> <h3>5 - Managing inventory for PCs and applications</h3> <ul> <li>Overview of inventory collection</li> <li>Configuring hardware and software inventory</li> <li>Managing inventory collection</li> <li>Configuring software metering</li> <li>Configuring and managing Asset Intelligence</li> </ul> <h3>6 - Distributing and managing content used for deployments</h3> <ul> <li>Preparing the infrastructure for content management</li> <li>Distributing and managing content on distribution points</li> </ul> <h3>7 - Deploying and managing applications</h3> <ul> <li>Overview of application management</li> <li>Creating applications</li> <li>Deploying applications</li> <li>Managing applications</li> <li>Deploying and managing Windows apps</li> </ul> <h3>8 - Maintaining software updates for managed PCs</h3> <ul> <li>The software updates process</li> <li>Preparing a Configuration Manager site for software updates</li> <li>Managing software updates</li> <li>Configuring automatic deployment rules</li> <li>Monitoring and troubleshooting software updates</li> <li>Enabling third-party updates</li> </ul> <h3>9 - Implementing Defender Protection for managed PCs</h3> <ul> <li>Overview of Endpoint Protection in Configuration Manager</li> <li>Configuring, deploying, and monitoring Endpoint Protection policies</li> <li>Configuring and deploying advanced threat policies</li> <h3>10 - Managing compliance and secure data access</h3> <ul> <li>Overview of Compliance Settings</li> <li>Configuring compliance settings</li> <li>Viewing compliance results</li> <li>Managing resource and data access</li> <h3>11 - Managing operating system deployment</h3> <ul> <li>An overview of operating system deployment</li> <li>Preparing a site for operating system deployment</li> <li>Deploying an operating system</li> <li>Managing Windows as a service</li> <h3>12 - Managing and maintaining a Configuration Manager site</h3> <ul> <li>Configuring role-based administration</li> <li>Configuring Remote Tools</li> <li>Overview of Configuration Manager site maintenance and Management Insights</li> <li>Backing up and recovering a Configuration Manager site</li> <li>Updating the Configuration Manager infrastructure</li> <h3>13 - What?s new in Microsoft Endpoint Configuration Manager</h3> <ul> <li>Whats new in Microsoft Endpoint Manager covering each semi annual release</li> </ul></ul></ul></ul></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans 55348: Administering Microsoft Endpoint Configuration Manager training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the 55348: Administering Microsoft Endpoint Configuration Manager course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Sccm

Microsoft Certified Technology Specialist (MCTS)

Commercial & Contract Management Certification Program (CCM)

IT Manager

Microsoft Certified Trainer (MCT)

55348 Administering Microsoft Endpoint Configuration Manager

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>Candidates for this course design, develop, secure, and troubleshoot Power Platform solutions. Candidates implement components of a solution that include application enhancements, custom user experience, system integrations, data conversions, custom process automation, and custom visualizations. Candidates will gain applied knowledge of Power Platform services, including in-depth understanding of capabilities, boundaries, and constraints.</p>Overview<p>After completing this course, students will be able to:<br />Create a technical design<br />Configure Common Data Service<br />Create and configure Power Apps<br />Configure business process automation<br />Extend the user experience<br />Extend the platform<br />Develop Integrations</p><p>The Microsoft Power Platform helps organizations optimize their operations by simplifying, automating and transforming business tasks and processes. In this course, students will learn how to build Power Apps, Automate Flows and extend the platform to complete business requirements and solve complex business problems.</p></div><div id="course-pills-2"><h4>Create a model-driven application in Power Apps</h4><ul><li>This module introduces you to creating a model-driven app in Power Apps that uses Common Data Service.</li></ul><h4>Get started using Common Data Service</h4><ul><li>This module will explain the concepts behind and benefits of Common Data Service. Creating an environment, entities, fields and options sets are also discussed.</li></ul><h4>Create a canvas app in Power Apps</h4><ul><li>This module introduces you to Power Apps, helps you create and customize an app, and then manage and distribute it. It will also show you how to provide the best app navigation, and build the best UI using themes, icons, images, personalization, different form factors, and controls.</li></ul><h4>Automate a business process using Power Automate</h4><ul><li>This module introduces you to Power Automate, teaches you how to build workflows, and how to administer flows.</li></ul><h4>Create a business process flow in Power Automate</h4><ul><li>This module introduces you to creating business process flows in Power Automate</li></ul><h4>Introduction to developing with Power Platform</h4><ul><li>This module is the first step in learning about platform, tools, and the ecosystem of the Power Platform</li></ul><h4>Extending the Power Platform user experience Model Driven apps</h4><ul><li>This module describes how to create client scripting, perform common actions with client script, and automate business process flow with client scrip. Learn about what client script can do, rules, and maintaining scripts. Discover when to use client script as well as when not to use client script.</li></ul><h4>Create components with Power Apps Component Framework</h4><ul><li>This module describes how to get started with Power Apps Component Framework with an introductory module on the core concepts and components. Then it shows you how to build a component and work with advanced Power Apps Component Framework features.</li></ul><h4>Extending the Power Platform Common Data Service</h4><ul><li>This module looks at the tools and resources needed for extending the Power Platform. We'll start with looking at the SDKs, the extensibility model, and event framework. This learning path also covers when to use plug-ins. Configuration of plug-ins as well as registering and deploying plug-ins.</li></ul><h4>Integrate with Power Platform and Common Data Service</h4><ul><li>This module describes how to integrate with Common Data Service using code by learning about Common Data Service API. Get an in-depth overview of options available with Common Data Service to integrate data and events to Azure.</li></ul><h4>Extend Power Apps portals</h4><ul><li>This module describes how to transform a content portal into a full web app interacting with Common Data Service. We will also cover the options available to customizers and developers to extend the portal functionality and integrate with Office 365, Power Platform, and Azure components.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans PL-400T00 Microsoft Power Platform Developer training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the PL-400T00 Microsoft Power Platform Developer course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Microsoft PL-900

Microsoft Power Apps

Power Apps

Microsoft Power Platform

Microsoft Power Automate

PL-400T00 Microsoft Power Platform Developer

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p></p><p>This course is intended for IT Professionals who are already experienced in general Windows Server, Windows client, Azure, and Microsoft 365 administration, and who want to learn more about using Windows PowerShell for administration. No prior experience with any version of PowerShell or any scripting language is assumed. This course is also suitable for IT Professionals already experienced in server administration, including Microsoft Exchange Server, Microsoft SharePoint Server, and Microsoft SQL Server.</p><p></p><p></p><p>This course provides students with the fundamental knowledge and skills to use PowerShell for administering and automating administration of Windows servers. This course provides students the skills to identify and build the command they require to perform a specific task. In addition, students learn how to build scripts to accomplish advanced tasks such as automating repetitive tasks and generating reports. This course provides prerequisite skills supporting a broad range of Microsoft products, including Windows Server, Windows Client, Microsoft Azure, and Microsoft 365. In keeping with that goal, this course will not focus on any one of those products, although Windows Server, which is the common platform for all of those products, will serve as the example for the techniques this course teaches.</p><p></p>Prerequisites<p>Before attending this course, students must have: </p><ul><li>-Experience with Windows networking technologies and implementation.</li> <li>- Experience with Windows Server administration, maintenance, and troubleshooting.</li></ul><p></p></div><div id="course-pills-2"><h3>1 - Review Windows PowerShell</h3> <ul> <li>Learn about Windows PowerShell</li> <li>Get familiar with Windows PowerShell applications</li> <li>Identify factors to install and use Windows PowerShell</li> <li>Configure the Windows PowerShell console</li> <li>Configure the Windows PowerShell Integrated Scripting Environment (ISE)</li> <li>Use Visual Studio Code with PowerShell</li> </ul> <h3>2 - Understand the command syntax in Windows PowerShell</h3> <ul> <li>Discover the structure of PowerShell cmdlets</li> <li>Discover the parameters for using PowerShell cmdlets</li> <li>Review the tab completion feature in PowerShell</li> <li>Display the About files content in PowerShell</li> </ul> <h3>3 - Find commands and Get-Help in Windows PowerShell</h3> <ul> <li>Define modules in PowerShell</li> <li>Find cmdlets in PowerShell</li> <li>Use command aliases in PowerShell</li> <li>Use Show-Command and Get-Help in PowerShell</li> <li>Interpret the help file contents and update the local help content in PowerShell</li> </ul> <h3>4 - Manage Active Directory Domain Services using PowerShell cmdlets</h3> <ul> <li>Manage user accounts in PowerShell</li> <li>Manage groups and group memberships in PowerShell</li> <li>Manage computer accounts in PowerShell</li> <li>Manage organizational units and Active Directory objects in PowerShell</li> </ul> <h3>5 - Manage network service settings for Windows devices using PowerShell cmdlets</h3> <ul> <li>Manage IP addresses in PowerShell</li> <li>Manage IP routing in PowerShell</li> <li>Manage DNS clients in PowerShell</li> <li>Manage Windows Firewall settings in PowerShell</li> </ul> <h3>6 - Manage Windows Server settings using PowerShell cmdlets</h3> <ul> <li>Automate management tasks using the Group Policy management cmdlets</li> <li>Manage server roles and services using PowerShell cmdlets</li> <li>Manage Hyper-V Virtual Machines using PowerShell cmdlets</li> <li>Manage Internet Information Services using PowerShell cmdlets</li> </ul> <h3>7 - Manage settings for a local Windows machine using PowerShell cmdlets</h3> <ul> <li>Manage Windows 10 using PowerShell</li> <li>Manage permissions with PowerShell</li> </ul> <h3>8 - Understand the Windows PowerShell pipeline</h3> <ul> <li>Review Windows PowerShell pipeline and its output</li> <li>Discover object members in PowerShell</li> <li>Control the formatting of pipeline output</li> </ul> <h3>9 - Select, sort, and measure objects using the pipeline</h3> <ul> <li>Sort and group objects by property in the pipeline</li> <li>Measure objects in the pipeline</li> <li>Select a set of objects in the pipeline</li> <li>Select object properties in the pipeline</li> <li>Create and format calculated properties in the pipeline</li> </ul> <h3>10 - Filter objects out of the pipeline</h3> <ul> <li>Learn about the comparison operators in PowerShell</li> <li>Review basic filter syntax in the pipeline</li> <li>Review advanced filter syntax in the pipeline</li> <li>Optimize the filter performance in the pipeline</li> </ul> <h3>11 - Enumerate objects in the pipeline</h3> <ul> <li>Learn about enumerations in the pipeline</li> <li>Review basic syntax to enumerate objects in the pipeline</li> <li>Review advanced syntax to enumerate objects in the pipeline</li> </ul> <h3>12 - Send and pass data as output from the pipeline</h3> <ul> <li>Write pipeline data to a file</li> <li>Convert pipeline objects to other forms of data representation in PowerShell</li> <li>Control additional output options in PowerShell</li> </ul> <h3>13 - Pass pipeline objects</h3> <ul> <li>Pipeline parameter binding</li> <li>Identify ByValue parameters</li> <li>Pass data by using ByValue</li> <li>Pass data by using ByPropertyName</li> <li>Identify ByPropertyName parameters</li> <li>Use manual parameters to override the pipeline</li> <li>Use parenthetical commands</li> <li>Expand property values</li> </ul> <h3>14 - Connect with data stores using PowerShell providers</h3> <ul> <li>Define Windows PowerShell providers</li> <li>Review the built-in providers in PowerShell</li> <li>Access provider help in PowerShell</li> </ul> <h3>15 - Use PowerShell drives in PowerShell</h3> <ul> <li>Explain PowerShell drives in PowerShell</li> <li>Use PowerShell drive cmdlets in PowerShell</li> <li>Manage the file system in PowerShell</li> <li>Manage the registry in PowerShell</li> <li>Work with certificates in PowerShell</li> <li>Work with other PowerShell drives in PowerShell</li> </ul> <h3>16 - Review CIM and WMI</h3> <ul> <li>Review architecture of CIM and WMI</li> <li>Review repositories in CIM and WMI</li> <li>Locate online class documentation by using CIM and WMI cmdlets</li> </ul> <h3>17 - Query configuration information by using CIM and WMI</h3> <ul> <li>List local repository namespaces and classes by using CIM and WMI</li> <li>Query instances by using commands and WMI Query Language</li> <li>Connect to remote computers by using CIM and WMI cmdlets</li> <li>Query repository classes from remote computers by using CIMSession objects</li> </ul> <h3>18 - Query and manipulate repository objects by using CIM and WMI methods</h3> <ul> <li>Discover methods of repository objects by using CIM and WMI</li> <li>Locate class methods and documentation by using CIM and WMI</li> <li>Invoke methods of repository objects by using CIM and WMI</li> </ul> <h3>19 - Manage variables in Windows PowerShell scripts</h3> <ul> <li>Define variables in Windows PowerShell scripts</li> <li>Create variable names in Windows PowerShell scripts</li> <li>Assign values and types to variables in Windows PowerShell scripts</li> <li>Identify the methods and properties of variables in Windows PowerShell scripts</li> <li>Use string variables and methods in Windows PowerShell scripts</li> <li>Use date variables and methods in Windows PowerShell scripts</li> </ul> <h3>20 - Work with arrays and hash tables in Windows PowerShell scripts</h3> <ul> <li>Define an array in Windows PowerShell scripts</li> <li>Work with array lists in Windows PowerShell scripts</li> <li>Define hash tables in Windows PowerShell Scripts</li> <li>Work with hash tables in Windows PowerShell scripts</li> </ul> <h3>21 - Create and run scripts by using Windows PowerShell</h3> <ul> <li>Review Windows PowerShell scripts</li> <li>Modify scripts in the PowerShell Gallery</li> <li>Create scripts using Windows PowerShell</li> <li>Review the PowerShellGet module in Windows PowerShell</li> <li>Run scripts and set the execution policy in Windows PowerShell</li> <li>Review Windows PowerShell and AppLocker</li> <li>Sign the scripts digitally in Windows PowerShell</li> </ul> <h3>22 - Work with scripting constructs in Windows PowerShell</h3> <ul> <li>Review and use the ForEach loop in Windows PowerShell scripts</li> <li>Review and use the If construct in Windows PowerShell scripts</li> <li>Review and use the Switch construct in Windows PowerShell scripts</li> <li>Review the For construct in Windows PowerShell scripts</li> <li>Review other loop constructs in Windows PowerShell scripts</li> <li>Review Break and Continue in Windows PowerShell scripts</li> </ul> <h3>23 - Import data in different formats for use in scripts by using Windows PowerShell cmdlets</h3> <ul> <li>Use the Get-Content command in Windows PowerShell scripts</li> <li>Use the Import-Csv cmdlet in Windows PowerShell scripts</li> <li>Use the Import-Clixml cmdlet in Windows PowerShell scripts</li> <li>Use the ConvertFrom-Json cmdlet in Windows PowerShell scripts</li> </ul> <h3>24 - Use methods to accept user inputs in Windows PowerShell scripts</h3> <ul> <li>Identify values that might change in Windows PowerShell scripts</li> <li>Use the Read-Host cmdlet in Windows PowerShell scripts</li> <li>Use the Get-Credential cmdlet in Windows PowerShell scripts</li> <li>Use the Out-GridView cmdlet in Windows PowerShell scripts</li> <li>Pass parameters to a Windows PowerShell script</li> </ul> <h3>25 - Troubleshoot scripts and handle errors in Windows PowerShell</h3> <ul> <li>Interpret error messages generated for Windows PowerShell commands</li> <li>Add output to Windows PowerShell scripts</li> <li>Use breakpoints in Windows PowerShell scripts</li> <li>Interpret error actions for Windows PowerShell commands</li> </ul> <h3>26 - Use functions and modules in Windows PowerShell scripts</h3> <ul> <li>Review functions in Windows PowerShell scripts</li> <li>Use variable scope in Windows PowerShell scripts</li> <li>Create modules in Windows PowerShell scripts</li> <li>Use the dot sourcing feature in Windows PowerShell</li> </ul> <h3>27 - Manage single and multiple computers by using Windows PowerShell remoting</h3> <ul> <li>Review the remoting feature of Windows PowerShell</li> <li>Compare remoting with remote connectivity</li> <li>Review the remoting security feature of Windows PowerShell</li> <li>Enable remoting by using Windows PowerShell</li> <li>Use one-to-one remoting by using Windows PowerShell</li> <li>Use one-to-many remoting by using Windows PowerShell</li> <li>Compare remoting output with local output</li> </ul> <h3>28 - Use advanced Windows PowerShell remoting techniques</h3> <ul> <li>Review common remoting techniques of Windows PowerShell</li> <li>Send parameters to remote computers in Windows PowerShell</li> <li>Set access protection to variables, aliases, and functions by using the scope modifier</li> <li>Enable multi-hop remoting in Windows PowerShell</li> </ul> <h3>29 - Manage persistent connections to remote computers by using Windows PowerShell sessions</h3> <ul> <li>Review persistent connections in Windows PowerShell</li> <li>Create and manage persistent PSSessions by using Windows PowerShell</li> <li>Disconnect PSSessions by using Windows PowerShell</li> <li>Review the feature of implicit remoting in Windows PowerShell</li> </ul> <h3>30 - Review Azure PowerShell module</h3> <ul> <li>Review Azure PowerShell</li> <li>Review the benefits of the Azure PowerShell module</li> <li>Install the Azure PowerShell module</li> <li>Migrate Azure PowerShell from AzureRM to Azure</li> <li>Review Microsoft Azure Active Directory module for Windows PowerShell and Azure Active Directory PowerShell for Graph modules</li> </ul> <h3>31 - Review the features and tools for Azure Cloud Shell</h3> <ul> <li>Review the characteristics of Azure Cloud Shell</li> <li>Review the features and tools of Azure Cloud Shell</li> <li>Configure and experiment with Azure Cloud Shell</li> </ul> <h3>32 - Manage Azure resources with Windows PowerShell</h3> <ul> <li>Create a new Azure virtual machine by using Windows PowerShell commands</li> <li>Manage Azure virtual machines by using Windows PowerShell commands</li> <li>Manage Azure related storage by using Azure PowerShell</li> <li>Manage Azure subscriptions by using Azure PowerShell</li> </ul> <h3>33 - Manage users, groups, and licenses in Microsoft Entra ID by using Windows PowerShell</h3> <ul> <li>Review benefits to manage Microsoft 365 services by using Windows PowerShell</li> <li>Connect to the Microsoft 365 tenant by using Windows PowerShell</li> <li>Manage users in Microsoft 365 by using Windows PowerShell</li> <li>Manage groups in Microsoft 365 by using Windows PowerShell</li> <li>Manage roles in Microsoft 365 by using Windows PowerShell</li> <li>Manage licenses in Microsoft 365 by using Windows PowerShell</li> </ul> <h3>34 - Manage Exchange Online by using Windows PowerShell</h3> <ul> <li>Connect to Exchange Online by using Windows PowerShell</li> <li>Manage mailboxes in Exchange Online by using Windows PowerShell</li> <li>Manage resources in Exchange Online by using Windows PowerShell</li> <li>Manage admin roles in Exchange Online by using Windows PowerShell</li> </ul> <h3>35 - Manage SharePoint Online by using Windows PowerShell</h3> <ul> <li>Install and connect to SharePoint Online Management Shell by using Windows PowerShell</li> <li>Manage SharePoint Online users and groups by using Windows PowerShell</li> <li>Manage SharePoint sites by using Windows PowerShell</li> <li>Manage SharePoint Online external user sharing by using Windows PowerShell</li> </ul> <h3>36 - Manage Microsoft Teams by using Windows PowerShell</h3> <ul> <li>Review Microsoft Teams PowerShell module</li> <li>Install the Microsoft Teams PowerShell module</li> <li>Manage teams with Microsoft Teams PowerShell module</li> </ul> <h3>37 - Create and manage background jobs using Windows PowerShell</h3> <ul> <li>Define the types of background jobs in Windows PowerShell</li> <li>Start remote jobs and CIM/WMI jobs in Windows PowerShell</li> <li>Monitor jobs in Windows PowerShell</li> <li>Retrieve results for running jobs in Windows PowerShell</li> </ul> <h3>38 - Create and manage scheduled jobs using Windows PowerShell</h3> <ul> <li>Create and run Windows PowerShell scripts as scheduled tasks</li> <li>Define scheduled jobs in Windows PowerShell</li> <li>Create job option and job trigger objects in Windows PowerShell</li> <li>Create and register a scheduled job in Windows PowerShell</li> <li>Retrieve the results from a scheduled job in Windows PowerShell</li> </ul></div>

Azure PowerShell

Powershell

Power Automate

AZ-040T00 Automating Administration with Powershell

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course will prepare participants to take the FC0-U61 exam to obtain the IT Fundamentals+ certification and help participants learn some of the basic principles and techniques of providing PC, mobile, applications, and network support.</p>Overview<p>On course completion, participants will be able to: - Set up a computer workstation and use basic software applications. - Explain the functions and types of devices used within a computer system. - Apply basic computer maintenance and support principles. - Describe some principles of software and database development. - Configure computers and mobile devices to connect to home networks and to the Internet. - Identify security issues affecting the use of computers and networks.</p><p>This course will prepare participants to take the FC0-U61 exam to obtain the IT Fundamentals+ certification and help participants learn some of the basic principles and techniques of providing PC, mobile, applications, and network support.</p></div><div id="course-pills-2"><h3>1 - Identifying Computer Hardware</h3> <ul> <li>Identify Types of Computing Devices</li> <li>Identify Internal Computer Components</li> <li>Common Computer Connector Types</li> <li>Identify Common Peripheral Devices</li> </ul> <h3>2 - Identifying Computer Software</h3> <ul> <li>Compare Functions and Features of Common Operating Systems</li> <li>Identify Application Software</li> </ul> <h3>3 - Setting Up a Basic Workstation</h3> <ul> <li>Connect Hardware</li> <li>Install and Configure Operating Systems</li> <li>Install and Configure Applications</li> <li>Configure Accessibility Options</li> </ul> <h3>4 - Configuring Network Access</h3> <ul> <li>Network Connection Types</li> <li>Install and Configure a SOHO Router</li> <li>Network and Alternative Technologies</li> <li>Sharing and Storage Methods</li> </ul> <h3>5 - Working with Files, Folders, and Applications</h3> <ul> <li>Create Files</li> <li>Navigate a File Structure</li> <li>Manage Files and Folders</li> <li>Compress and Extract Files</li> <li>Create Screen Captures</li> </ul> <h3>6 - Configuring and Using Wireless Devices</h3> <ul> <li>Configuring Wireless Devices</li> <li>Use Wireless Devices</li> </ul> <h3>7 - Securing Computing Devices</h3> <ul> <li>Identify Security Threats</li> <li>Apply Security Best Practices</li> <li>Perform Secure Web Browsing</li> </ul> <h3>8 - Supporting Computers and Users</h3> <ul> <li>Environmental and Safety Concepts</li> <li>Back Up and Restore Data</li> <li>Manage Software</li> <li>Implement Basic Support Measures</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans CompTIA IT Fundamentals Plus Certification (ITF Plus) (Exam FCO-U61) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the CompTIA IT Fundamentals Plus Certification (ITF Plus) (Exam FCO-U61) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

8252 Opera courses delivered Online

Geomechanics at Well and Field Scale

By EnergyEdge - Training for a Sustainable Energy Future

Certified Wireless Analysis Professional

By Systems & Network Training

Optimizing Gas Well Performance & Deliquification

By EnergyEdge - Training for a Sustainable Energy Future

Reservoir Engineering for Geosciences Professionals and Other Disciplines

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Load Forecasting & Methodology

By EnergyEdge - Training for a Sustainable Energy Future

CND - EC Council Official Certified Network Defender

By Nemstar Ltd

Automate Application with Specflow and Selenium WebDriver C#

By Packt

Certified Data Centre Expert (CDCE)

By Nexus Human

EC-Council Certified Chief Information Security Officer (C|CISO)

By Nexus Human