• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

341 Educators providing Installation courses

Cabe

cabe

Northampton

The role of CABE’s Presidential Team and Board is to set out the strategic objectives and aims of the Association and to ensure their delivery. All representatives on the board are members of CABE are nominated to the position by Chartered Members. They represent a mixture of views from different specialities and areas across the industry making sure there is a variety of perspectives to help shape CABE’s unifying voice. CABE Patron Lord John Lytton BSc FCABE (Hon) IRRV FRICS In his role as patron of CABE, Lord Lytton acts as an influential figurehead, creating valuable partnerships with organisations across the globe through his extensive network of industry and Governmental contacts and assisting the Association in raising its profile and influence within the building and construction industry. Lord Lytton is a leading chartered surveyor and an active contributor to the House of Lords. He is chairman of the boundaries and party walls professional panel of the Royal Institution of Chartered Surveyors and a Vice Chairman of the All Party Parliamentary Group for Excellence in the Built Environment as well as being newly appointed to the House of Lords Information Committee. He has been an Honorary Fellow of ABE since 1997, and CABE since its formation in 2014. Presidential Team Joseph Birt PCABE FCABE – President Joseph Birt worked for 22 years within Local Authority Building Control in various posts; the latter 12 years as Specialist Support Officer for a Cluster of Councils, which included responsibility for advising on fire safety aspects of the Building Regulations. He was, for ten years, a Director of the William Keown Charitable Trust, which champions equality in the built environment and celebrates the achievements of people with disabilities. He has been elected twice as Chairman of the Northern Ireland Fire Safety Panel. By Ministerial Appointment he served two terms on the Northern Ireland’s Building Regulations Advisory Committee (BRAC) where he contributed to the development of the current Northern Ireland Building Regulations. He has also served two terms on the Department of Communities, Historic Buildings Council. Joseph is a Chartered Building Engineer, who continues to be active within his local CABE Region; currently Treasurer and past Chairman of the CABE Northern Ireland Region’. He is now the Technical Director of FRSNI Ltd. Richard Smith VPCABE FCABE – Vice-President Richard Smith commenced his employment as a YTS Trainee in Building Control back in 1989 and has progressed his career to become the Head of Standards and Innovation and Research at NHBC where he oversees the delivery and implementation of NHBC's Technical Standards, Technical policy, Acceptance of innovative and non-traditional construction methods and leads the NHBC Foundation. Richard is also a member of The Building Regulations Advisory Committee and support a number of Sub Committees including new building broadband connectivity, Part M Working Group and Building Act 1984 working group. Richard Flynn CEng CEnv CWEM VPCABE FCABE – Vice-President Richard is an independent private practitioner trading as Flynn & Shaw, Chartered Building Engineers. As well as being a Chartered Building Engineer, he is a Chartered Engineer, Chartered Environmentalist, Chartered Water and Environment Manager, Registered Building Surveyor and Certified Site Assessor. Richard is a recognised expert in the area of onsite wastewater treatment and provides a complete site suitability assessment, treatment system design, and certification of installation for onsite wastewater treatment systems throughout Ireland. Richard has been Chair of the CABE Membership and Professional Standards Committee (MPSC) since its inception in 2019 as well as member of the Southern Ireland Region committee of CABE. Stewart C McArthur BSc (Hons) PPCABE FCABE RICS Dip BC – Past President Stewart has 30 years’ experience in the house building industry. He has a degree in Fire Risk Engineering from Glasgow Caledonian University. During his studies he also attended seminars at Maryland University and had the privilege of being tutored by some of the most widely respected experts in the fire engineering sector. Stewart began his career in building standards before moving into the warranty sector. He also has recent experience as a site manager. This broad experience has given him a greater understanding of the house building industry from all perspectives. He has been a member of CABE since 2001 and has played an active part in the regional committee for the past ten years. CABE Board Daniel Fordham FCABERussell Urwin FCABETony Harvey-Soanes FCABEPaul Grinyer FCABEDavid Courtney CEnv FCABE Lindsay Richards BSc MBA MCABE Chartered Building EngineerZoe Cox FCABEMishka Scott MCABE Chartered Building EngineerDavid Kitcatt FCABEIsacc Sunder Packianathan FCABE Executive Team Dr Gavin Dunn BSc (Hons) MSc PhD FCABE – Chief Executive Originally trained as an architect, Gavin initially practised in North America with a large construction engineering firm before returning to the UK to specialise in the energy and environmental performance of buildings in 1998. Gavin advanced this specialism through positions at the Welsh School of Architecture, and Elmhurst Energy, where he helped develop some of Europe’s leading building energy certification and labelling systems. In 2013 Gavin was appointed Director of Building Performance at the Building Research Establishment (BRE) where he was responsible for a portfolio of BRE's globally leading services including BREEAM and CEEQUAL the world’s foremost environmental assessment methods for the built environment. In 2018, Gavin was appointed as Chief Executive of CABE where he works to help enable a more professional construction sector that works to create better, safer and more sustainable buildings that enhance people’s lives. Gavin was a member of the Building Regulations Advisory Committee (BRAC) of the UK Government from 2015 to 2022 where he served as Chairman of the Future Homes Standard Working Group. Jackie Macaulay – Chief Operating Officer Jackie is responsible for all aspects of the organisations operations and internal processing. Her remit includes compliance, legal services, HR, OD & change management, IT, facilities, PR & communications, membership processing and deputising for the CEO in his absence. Her experience spans a range of manufacturing, construction and not-for-profit organisations with her first Director position as HR Director for Electrolux in 2004. Jackie has worked across the UK, Ireland and internationally across Europe and Asia managing diverse and multi-disciplined teams. She brings to CABE the senior expertise that will develop the organisation as it moves forward with its modernisation and development strategy. Richard Harral BA BArch FCABE RIBA – Technical Director Richard Harral is the Technical Director for CABE. He has previously worked as an architect in both public and private sector practice, and as a policy official in the Building Regulations Division of MHCLG between 2007 and 2014 where he oversaw introduction of policies on accessible housing, security standards, broadband and the national space standard for new homes. He was subsequently Head of Technical Policy in the period 2014-2017. He currently sits on the CIC Competence Steering Group, and chairs a number of competence working groups including on Designer and Architect Competence. He was Technical author for Flex 8670, the recently published British Standard on Competence for building safety in Built environment industries. Alison Duckles CBE – Professional Development Director Alison has worked in the Construction sector for over 24 years, predominantly with Laing O’Rourke. She previously held roles with the Chartered Institution of Waste Management and Eastern Group plc in the power sector. Predominantly focused on learning and development while driving competence, professional standards, and futures skills requirement; Alison worked extensively on the creation of new construction apprenticeships, engaging employers, providers, sector bodies and Government. In her role with CABE Alison is responsible for continuing to strengthen partnerships with academic institutions, provide members with quality training and CPD opportunities and Support the Association’s ambition to drive competency and professional responsibility in the construction sector. CABE Staff Membership Services Team – membership@cbuilde.com Our friendly, experienced membership team is always on hand to offer the best possible advice on becoming a member of CABE, advising you on the best route to membership and helping you to progress through our grades as your career develops. Amy Chatfield – Membership Services Manager Amy leads the Membership Team, which is responsible for all membership processing, professional interviews for CABE Chartered Membership and registrations for both the Engineering Council and Society for the Environment. With a strong background in customer service, Amy joined CABE in 2015. She has held a variety of positions, including roles in the Publications Team – working on the building engineer journal – and the Events & Marketing Team. After building extensive knowledge of the membership journey, she moved into the Membership Team in 2018; since then, she has worked continuously to improve processes, ensuring that the Association provides excellent customer service to all new and existing members. Alongside her role as Membership Services Manager, Amy is a trained Mental Health First Aider (MHFA), providing wellbeing support for her colleagues. Sabrina Miah Professional Review Co-ordinator Tara Talley Membership Services Co-ordinatorJoshua Law Membership Services Administrator Communications Team – info@cbuilde.com The Communications team deliver vital resources, news, and information to our membership, keeping them up-to-date with industry changes, standards, and opinions. This is done through direct contact with our membership, delivering our monthly journal, BuildingEngineer . Laura Richardson - Head of Communications Laura has been with CABE since 2018 when she joined as PR and Communication manager. She is responsible for implementing the communications strategy across the Association’s communication streams including PR, Marketing, and Digital Infrastructure functions. She joined CABE from Booker, where she gained experience in website marketing and design. Along with her previous experience working in publications and marketing roles in the construction industry she brings a lot of skills and strengths to the team. Maya Bullock Communications & Digital Designer Abigail Crook Communications Administrator Professional Development Team – training@cbuilde.com CABE provides a range of services to our members and the wider industry to assist in the expansion of knowledge in respect of the built environment. Our Professional Development Team facilitate this by ensuring opportunities such as our suite of regional conferences, annual conference & exhibition, training courses, local/regional CPD and our 12 UK & ROI regions run smoothly and offer the highest possible quality in their delivery. Kirri Porter-White - Competency & Learning Lead Kirri has been with the association since 2015, working initially within the Regional Services and Events team to provide support for the regional committees over CABE’s 12 regions in the UK and Ireland, as well as our international Chapters. Kirri is responsible for the development and deployment of CABE’s training and learning infrastructure, focusing on both technical competency and wellbeing within the construction industry. Kirri’s team also work with the Professional Development Director on academic accreditation and relationships with universities. Rosemary Brewill Regional Services Co-ordinatorShaneka Foster Professional Development Administrator Operations Team – info@cbuilde.com The Operations Team are involved in the day-to-day activities of the Association, to ensure the smooth running of all CABE’s activities, including Finance, IT, Legal and Facilities. Carl Pearson - Head of Legal and Governance Services Carl has worked both private practice and in-house roles, within the sectors of welfare law, housing law, debt law, consumer law, compliance law, and commercial law. Joining CABE in 2018 from Dixons Carphone, Carl is responsible for providing the Association with internal legal advice on its business practices, activities and contractual relationships, development and review of various internal policies and procedures and day-to-day management of disciplinary and complaints investigations. Jacky Lonsdale - Head of Finance Jacky joined CABE in November 2021 and brings a wealth of experience having worked for a number of both large corporate companies and smaller businesses including JVC, Total Oil Marine, Bosch Security Systems and Vinci Construction. Before joining CABE she worked for the Auto-Cycle Union, a motorcycle membership organisation. As Head of Finance Jacky is responsible for the delivery of financial information to the management team. Finance encompasses all areas of accounting processes, monthly management accounts, forecasts, annual budgets and financial statements. It also covers all aspects of audit liaison and statutory return requirements. Jacky’s mission is to ensure financial reporting is accurate, concise and on time. Helena Wootton Reception and Office ManagerAlison Lodge Executive AssistantCharlotte Taylor Finance Assistant Hong Kong Office – info@cbuilde.com Vivian Sie BA (Hons) MA MSc - General Manager Vivian is the General Manager of CABE Hong Kong Chapter responsible for daily operation, enhancing communication with members and working partners, upholding the reputation of one of the international recognised associations in Hong Kong and beyond.Before joining CABE, Vivian had experience in the areas of corporate governance and public sector management where she was instrumental in providing efficient secretarial support to a local leading professional institute and a regulatory body. Her remit included membership processing and benefits, media relations, disciplinary proceedings, set-up of Biennale Foundation and Beijing Representative Office, key event planning and execution. After graduating with BA honours in translation, Vivian obtained a distinction in the Master of Arts in International Communication from the Macquarie University, Australia. She has a Master of Science in Public Sector Management. Mable Hung Administrator

Courses matching "Installation"

Show all 1449

AM2/AM2E/AM2S Assessment

4.7(1243)

By Technique Learning Solutions

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

AM2/AM2E/AM2S Assessment
Delivered in Clay Cross or Online + more
£500

C10M09 - Gas Extinguishing Detection & Electrical Actuation BS 6266 & BS 7273-1 (Online)

5.0(2)

By Ember Compliance

Learners will develop knowledge of FD&FA systems and apply this to the provision of detection and electrical actuation for gas extinguishing systems.

C10M09 - Gas Extinguishing Detection & Electrical Actuation BS 6266 & BS 7273-1 (Online)
Delivered Online
£420

C&G 2391-50, Initial Verification of Electrical Installations

4.7(1243)

By Technique Learning Solutions

The City and Guilds 2391-50 electrical course has been designed to meet the needs of the electrical installation industry, and is aimed at practising electricians who have not carried out inspection and testing since qualifying or who require some update of training before going on to other City and Guilds qualifications. Candidates who achieve the City and Guilds 2391-50 qualification could progress on to the City and Guilds 2391-51: the Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. The City and Guilds 2391-50 course will focus on the teaching and learning of initial verification and certification of electrical installations. In order to claim the full City and Guilds 2391-50 qualification, students must successfully complete: One 1 hour 30 minute online multiple choice test to be completed during the courseOne 3 hour 30 minute practical test to be completed after the course, broken into two sections as follows:Task A – Initial Verification and Certification of the Complete Installation – 2hrs and 30minsTask B – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-50 course costs include examination entry fees.

C&G 2391-50, Initial Verification of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations

4.7(1243)

By Technique Learning Solutions

City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

Hydronics Unlocked 1-day Course

5.0(435)

By Warmur Academy

Hydronics Unlocked — 1-Day Course Design and install smarter heating systems with confidence. This full-day course is crafted for heating professionals who want to sharpen their design skills, understand system performance and build the knowledge they need for modern, efficient installs — with boilers, heat pumps or both. 💡 Who This Course Is For Whether you're: An experienced engineer looking to stay ahead of the curve, Newly qualified and craving clear, practical answers Installing gas or oil boilers and exploring the move into heat pumps, Already fitting heat pumps but missing key insights, Or designing systems on paper and want to bridge the gap to real-world installs… This course will help you take your next step to levelling up your career. 🧠 What You’ll Learn Build the confidence and skills to deliver systems that are more efficient, reliable and ready for the future. You'll learn: Our 10-Step Hydronics Process: your complete framework for design and installation Pump Setting: understand how to match pump performance to system needs Flow, Velocity, Resistance: calculations made simple and useful Pipe Sizing: learn how to size pipes correctly to minimise pressure loss Controls for Efficiency: understand how modern controls improve performance Low temperature design: build confidence and skills for heat pump work 🎁 What's Included 📍 In-person training led by Kimbo 📖 Take-home course book ☕ Tea, coffee, and biscuits provided throughout 🥪 Lunch provided ⭐ Kimbo Betty Kimbo is a pioneer in hands-on heating system training and the founder of Heating Academy Northampton. With a background as an installer, he became one of the UK’s best-known trainers, famous for his no-nonsense, practical approach and deep understanding of hydronics. His focus on flow, resistance and system behaviour helped thousands of engineers see heating systems in a new light. While he’ll now be delivering exclusively from his base in Northampton. 🗺 Where Lumbertubs Inn, Boothville, Northampton NN3 6HA Google Maps Link

Hydronics Unlocked 1-day Course
Delivered In-Person in Northampton + more
£295

C&G 2392-10 – Level 2 Certificate in Fundamental Inspection, Testing & Initial Verification

4.7(1243)

By Technique Learning Solutions

City & Guilds 2392 10 level 2 is a short course aimed at newcomers to inspection and testing of electrical installations, and also the logical route towards 2391-50, 2391-51, or 2391-52. City & Guilds 2392 10 level 2 Certification is achieved on successful completion of both the practical assessment and PC based examination. A four day course for a student possessing a working knowledge of the wiring regulations, to the level of City and Guilds 2382. We strongly recommend City and Guilds 2382 is achieved prior to sitting this City & Guilds 2392 10 level 2 course, though this is NOT an entry requirement. The City & Guilds 2392 10 level 2 exam is a PC based multiple choice examination has 50 questions, is 1 hour 40 mins long and is closed book, with instant result. To further support this City & Guilds 2392 10 level 2 course, we offer a 1 day practical workshop available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical examination. Most students who take this option, elect to complete this the day before their practical assessment. The practical assessment takes approximately 2 hours, this can, if available, be taken on the day following the on-line examination or at a later date at a time which is mutually convenient to both student and centre. The City & Guilds 2392 10 level 2 course costs include examination entry fees, a buffet lunch and refreshments throughout the day. The course costs include examination entry fees.

C&G 2392-10 – Level 2 Certificate in Fundamental Inspection, Testing & Initial Verification
Delivered in Clay Cross + 1 more or Online + more
£500

Sparky Facts 18th edition course

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

Sparky Facts 18th edition course
Delivered Online & In-Person + more
£264

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations

4.7(1243)

By Technique Learning Solutions

City & Guilds 2391-52 Combined Course: Course Description The new Testing and Inspection City & Guilds 2391-52 Combined Course qualification replaces and is improved on the former 2394/2395 that was previously available to electricians but has since been withdrawn. City & Guilds 2391-52 course runs over five consecutive days, the first three days covering fundamental theory. The fourth day covering Initial Verification practical and revision. The fifth day of the City & Guilds 2391-52 course covering Periodic Inspection practical and revision with an open book 2 hours Multiple choice exam. A 5 day City & Guilds 2391-52 course for a student possessing knowledge of the wiring regulations and with minimal knowledge of inspection and testing, We strongly recommend City and Guilds 2382 is achieved prior to sitting this course, though this is NOT an entry requirement. In order to claim the full City & Guilds 2391-52 qualification, students must successfully complete the following: Completed during the course each student will sit a 2 hours online Multiple choice exam (open book) Then will have to reattend and complete a Practical Assessment which is 4hrs. Assessment – 2391-52 Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs and 30mins Task C – Short Answer Questions – 1hr and 20mins To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City & Guilds 2391-52 course costs include examination entry fees. The Tutors: Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment. On-site Available Group Rate: (up to 8 people): £895.00 + VAT Per Day* plus £50.00 + VAT Exam Entry Fee per Student *(over 8 people, please call on 0800 112 3310 to discuss Group Rate) This course replaces City & Guilds 2394/2395 combined – Level 3. Essential Book supplied *throughout* course!First exam fee included!

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

C02M01 - FD&FA Domestic - BS 5839-6 (Classroom)

5.0(1)

By Ember Compliance

Delegates will develop knowledge of the requirements for the design, installation and commissioning of Fire Detection and Fire Alarm systems within domestic properties in compliance with the requirements of BS 5839-6 and other codes of practice.

C02M01 - FD&FA Domestic - BS 5839-6 (Classroom)
Delivered In-Person in Broxburn
£230

C20M02 - Closed circuit television systems (CCTV) - Foundation (classroom)

5.0(1)

By Ember Compliance

Learners will be introduced to the design, installation, commissioning, and maintenance of CCTV systems.

C20M02 - Closed circuit television systems (CCTV) - Foundation (classroom)
Delivered In-Person in Broxburn
£230