2490 Courses in Shepton Mallet

REFERENCE CODE 601/8330/5 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at those who are involved in installing roof sheeting and cladding systems and associated tasks on site working from drawings and specifications. It is not expected that candidates working in this industry all do the same activities or use the same equipment and machinery so there is a group of optional units to cover these matters, however all candidates will need to prove competence in preparing the resources required, installation of sheeting and cladding systems and rainwater goods (gutters, pipes, downpipes and angles (swan necks, off sets), brackets and supports, sumps, overflows and outlets). All work completed must be carried out in accordance with Building Regulations and Industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the core skills above, candidates will also be able to select optional units recognising skills including, repair and/or refurbishment of roof sheeting/cladding/rainscreen systems, working with boom and/or scissor type mobile elevating platforms (MEWPs), installing solar collectors, use of ergonomic manipulating machines or slinging/signalling the movement of loads.

REFERENCE CODE 610/0054/0 COURSE LEVEL NVQ Level 3 THIS COURSE IS AVAILABLE IN Course Overview Who is this qualification for? This qualification is aimed at those who are involved in setting out and erecting masonry structures onsite working from drawings and specifications. The structures could be brick and blockwork or local materials. It is not expected that candidates working in this industry all do the same activities, so the qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the mandatory units’ candidates will also be able to select optional units recognising specific skills What is required from candidates? Qualifications are now required to indicate the total qualification time (TQT), this is to show the typical time it will take someone to attain the required skills and knowledge to meet the qualification criteria, this qualification has a TQT of 610 hours. Qualifications are also required to indicate the number of hours of teaching someone would normally need to receive in order to achieve the qualification. These are referred to as Guided Learning Hours (GLH). The GLH for this qualification is 334. Group A MANDATORY UNITS Level Credit Confirming Work Activities and Resources for an Occupational Work Area in the Workplace Developing and Maintaining Good Occupational Working Relationships in the Workplace Confirming the Occupational Method of Work in the Workplace Conforming to General Health, Safety and Welfare in the Workplace Erecting and Dismantling Access/Working Platforms in the Workplace Preparing surfaces for painting and/or decorating in the workplace Applying surface coatings by brush and roller in the workplace Optional units Group A – Minimum of 1 unit must be achieved from this group Hang wallcoverings (standard and foundation papers) in the workplace Hanging non-standard width wallcoverings in the workplace 3 20 Optional units Group B-Minimum of 1 unit must be achieved from this group Applying coatings by the airless spray method in the workplace Summary of the: LEVEL 3 NVQ DIPLOMA IN DECORATIVE FINISHING-PAINTING AND DECORATING (CONSTRUCTION) Producing and applying complex stencils in the workplace 3 21 Hanging wallcoverings to complex surfaces in the workplace 3 32 Hanging wallcoverings (specialised paper) in the workplace 4 30 Assessment Guidance: Evidence should show that you can complete all of the learning outcomes for each unit being taken. Types of evidence: Evidence of performance and knowledge is required. Evidence of performance should be demonstrated by activities and outcomes, and should be generated in the workplace only, unless indicated under potential sources of evidence (see below). Evidence of knowledge can be demonstrated though performance or by responding to questions. Quantity of evidence: Evidence should show that you can meet the requirements of the units in a way that demonstrates that the standards can be achieved consistently over an appropriate period of time. Potential sources of evidence: The main source of evidence for each unit will be observation of the candidate’s performance and knowledge demonstrated during the completion of the unit. This can be supplemented by the following types of physical or documentary evidence: Accident book/reporting systems Photo/video evidence Safety records Work diaries Training records Timesheets Audio records Telephone Logs Job specifications and documentation Meeting records Delivery Records Records of toolbox talks Witness testimonies Equipment Correspondence with customers Prepared materials and sites Notes and memos Completed work Please Note that photocopied or downloaded documents such as manufacturers or industry guidance, H&S policies, Risk Assessments etc, are not normally acceptable evidence for these qualifications unless accompanied by a record of a professional discussion or Assessor statement confirming candidate knowledge of the subject. If you are in any doubt about the validity of evidence, please contact Oscar Onsite Academy

REFERENCE CODE 603/6964/4 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification enables the learner to demonstrate and recognise their skills, knowledge and understanding and to demonstrate their competence in a real workplace environment so that they can work in the Site Logistics Operations sector within the construction industry. All work must be completed following Industry recognised Safe Working Practices and in accordance with relevant legislation. This qualification is at Level 2, although some units may be at different levels and should be taken by those who are fully trained to deal with routine assignments. Candidates should require minimum supervision in undertaking the job. The qualification has been developed in a way to allow employees from companies of all sizes and specialisms equal opportunity to complete.

REFERENCE CODE 610/0075/3 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at individuals wishing to prove they have the level and range of knowledge and skills required to install Interior Systems in the Construction working environment. It is not expected that all workers will complete the same tasks, there are 3 mandatory units common to all pathways. The Pathways will allow employees with specific skills and from companies of all sizes equal opportunity to complete. All work must be completed following Industry recognised Safe Working Practices and in accordance with relevant legislation. This qualification is at Level 2, although some units may be at different levels and should be taken by those who are fully trained to deal with a range of tasks and situations. There is also a Level 2 Certificate and a Level 3 Diploma in Interior Systems available.

REFERENCE CODE 600/6511/4 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at those who are involved in plastering activities in the workplace. It is not expected that candidates working in this industry all do the same activities so the qualification has been developed to allow opportunities for those carrying out work in any one of the following broad categories: solid basic plastering, solid full plastering, basic fibrous plastering and full fibrous plastering. Those taking the qualification must also prove knowledge and competence in working at heights, calculating quantities and wastage and the use of powered and hand tools and equipment. All work completed must be done in accordance with building regulations and industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the core skills above, candidates will also be able to select optional units recognising skills including, working with direct bond dry linings, laying sand and cement screeds, installing mechanically fixed plasterboard and carrying out repair work. The standards cover the most important aspects of the job. This qualification is at Level 2, although some units may be at different levels and should be taken by those who are fully trained to deal with routine assignments. Candidates should require minimum supervision in undertaking the job

RSPH level 2 Identifying and Controlling Food Allergy Risks Training Course Do you need an allergy trainer to come to your food business and teach your staff face to face about food and drink allergens, their dangers and how to control them? Our allergy trainer can come to your business and deliver this course at your business premises. Although we are based in London, we are happy to travel and deliver this course at your business location. (Trainer travel fees may be applicable depending on your location). Staff will receive interactive training and coaching on allergens and intolerances with an experienced trainer. We can also tweak the training to include issues you would like to cover. See our website for more details. Special offer for on-site allergy training. £250 plus £20pp includes RSPH exam fees (usually £350 plus £30pp) This course is suitable for any catering business such as restaurants, pubs, hotels, cafes, catering companies, cooks, self employed, artisans, event caterers and more. This course is also important for staff who are Front of House, who take customer orders and relay the orders to cooks and chefs and other people who are preparing food for customers who have allergies and or intolerances. This is a short one day training course, typically 9am-3pm. Topics covered include- Allergens, Allergen Identification, Cross contact, Cross Contamination, Allergic Reactions, Food Intolerances, Coeliac, Anaphylaxis, Natasha's Law, UK Food Safety Regulations, Allergy Controls, Substituting ingredients, Customer Communication and what to do in an Emergency. Contact us to book training.

Dynamic Driving School offers driving lessons across Hounslow. We also give driving lessons in Isleworth, Ashford, Feltham, Heston and Osterley. At Dynamic Driving School our aim is to teach you how to drive safely in today's road conditions. Our driving instructors are fully qualified and approved by the Driving Standards Agency. We will make sure your driving lessons are comfortable and enjoyable to ensure maximum learning. You will be guided step by step giving you all the skills and knowledge to pass your practical driving test. All driving lessons are on a 1-2-1 basis in well-presented air conditioned cars. Our driving instructors are all local to Hounslow, hence know the area well. Our driving school uses both Manual and Automatic cars.

Course Objectives By the end of this course, participants will be able to: Differentiate between coaching and mentoring and understand their unique purposes. Apply effective communication and active listening skills in developmental conversations. Use coaching models to guide structured conversations. Build trust and psychological safety in coaching and mentoring relationships. Create actionable development plans and track progress. Understand ethical boundaries and confidentiality. Course Outline Day 1: Foundations of Coaching and Mentoring Session 1: Introduction and Context What is coaching? What is mentoring? Key differences and when to use each Benefits to individuals and organisations Session 2: Core Skills for Effective Coaching and Mentoring Active listening Powerful questioning Giving and receiving feedback Empathy and emotional intelligence Session 3: Building Trust and Creating Psychological Safety Establishing rapport Confidentiality and ethical guidelines Setting boundaries and expectations Session 4: Coaching Models and Frameworks GROW Model (Goal, Reality, Options, Will) OSKAR and CLEAR frameworks Practical application and role play Day 2: Practising and Embedding Coaching and Mentoring Session 5: The Coaching and Mentoring Conversation Structuring conversations Using real-life workplace examples Practice with feedback Session 6: Setting Goals and Development Plans SMART and CLEAR goal setting Creating growth-focused action plans Monitoring progress and accountability Session 7: Mentoring for Career and Leadership Development Mentor roles and responsibilities Supporting long-term growth and resilience Reverse mentoring and cross-generational partnerships Session 8: Embedding a Coaching and Mentoring Culture How to support coaching within your team or organisation Integrating into performance conversations Sustaining development through peer coaching and communities of practice Assessment and Evaluation Participation in discussions and practical activities Feedback on peer coaching/mentoring exercises Optional personal development plan submission Course Materials Provided Participant workbook Coaching and mentoring toolkit (templates, models, guides) Suggested reading and resource list

It’s Not a Bad Technique to Use Per Se, but It’s a Bit “old School” and, Frankly, a Bit Overused. Do Something Else. Instead of Focusing on Your Needs as a Brand, Focus on the Needs of the Customer as a Person. Recognize Their Needs as a Customer and How You Respond to Them Specifically. To Do This, Get to Know Your Customer’s Mindset and Analyse Why They Have Churned (Remember Point 1 Again With Data, Data, Data…). Then, Consider How Your Product or Service Helps Them and What Benefit They Can Get From You That They May Have Forgotten or Lost Focus on. Then, Reframe What You, as a Brand, Need to Do to . Win Them Back. Essentially, You Need to Make an Effort to Understand Your Customer’s Journey and Why and How They Make Decisions, E.g. Whether to Buy From You Again. Once This is Done, It Gives You B2C Lead the Opportunity to Replicate the Value or Exclusivity of the Information, Services or Offers You Provide, as the Following Examples From Dollar Shave Club and Boden Elegantly Demonstrate: Figure 3: Dollar Shave Club Recovery Email American Lowe's Chooses to Approach It in a Slightly Different Way by Informing Customers of What They May Have Missed Without Engaging With the Brand: the Icing on the Cake Here is That They Do It in a Slightly . Humorous Way That Reflects the Core Value of Offering Home Products. However, One Should Be a Little Cautious With This Example: Although the Email Design May Look Very Appealing, It is Worth Making Sure That Your Design Does Not Degrade the Cta Button. As You Can See, the “learn More” Button is Not What You Put Most Noticeable in the Email. As With Everything Else, It's About Finding Balance and a Willingness to Test and Experiment to End Up in the Best Shape for the Optimal Recovery Campaign. 5: Reward Their Loyalty Your Data Shows You Exactly How Engaged a Lost Customer Has Been in the Past. Even Though They May Have Been Less .

Level 2 Food Safety and Hygiene in Catering Course