Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 5 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N021 Suction ExcavatorIt is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular suction excavator to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for suction excavator use ➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material ➢ Safely mount and dismount the machine ➢ Start and stop the engine, compressor and suction hoses safely and efficiently ➢ Be able to demonstrate how to safely and efficiently use the remote control ➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas ➢ Conduct all necessary safety checks at the work area ➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks ➢ Demonstrate an emergency stop explaining all relevant safety precautions ➢ Carry out excavating tasks ➢ Fit and remove different attachments ➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently ➢ Environmental considerations ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 5 days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N021 Suction Excavator
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular suction excavator to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
➢ Identify and maintain PPE appropriate for suction excavator use
➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material
➢ Safely mount and dismount the machine
➢ Start and stop the engine, compressor and suction hoses safely and efficiently
➢ Be able to demonstrate how to safely and efficiently use the remote control
➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas
➢ Conduct all necessary safety checks at the work area
➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out
excavating tasks
➢ Demonstrate an emergency stop explaining all relevant safety precautions
➢ Carry out excavating tasks
➢ Fit and remove different attachments
➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently
➢ Environmental considerations
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Suction Excavator (N021)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 180&deg; excavators to excavate and load materials.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for excavator 180&deg; use</li><li fr-original-style="" style="box-sizing: border-box;">Prepare excavator 180&deg; for use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Store and transport excavator 180&deg; attachments</li><li fr-original-style="" style="box-sizing: border-box;">Explain loading/unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests- 1 day theory and practical assessment<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Location</h2></div>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 180° excavators to excavate and load materials.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Identify and maintain PPE appropriate for excavator 180° use
Prepare excavator 180° for use
Conduct all necessary safety checks at the work area
Operate machinery safely and efficiently
Understand environmental considerations
Store and transport excavator 180° attachments
Explain loading/unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Excavator 180 (N201)

COURSE INFORMATIONThe novice course is split into 4 days of training and one day of testing.&nbsp;By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.Days 1-4:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">Explanation of qualifications</li><li fr-original-style="" style="box-sizing: border-box;">Legislation controlling crane operations</li><li fr-original-style="" style="box-sizing: border-box;">BS 7121 Explanation</li><li fr-original-style="" style="box-sizing: border-box;">LOLER regulations in detail</li><li fr-original-style="" style="box-sizing: border-box;">Crane appreciation</li><li fr-original-style="" style="box-sizing: border-box;">Crane stability</li><li fr-original-style="" style="box-sizing: border-box;">Accessories</li><li fr-original-style="" style="box-sizing: border-box;">Safe slinging</li><li fr-original-style="" style="box-sizing: border-box;">Mobile crane selection</li><li fr-original-style="" style="box-sizing: border-box;">Risk assessment and method statement</li><li fr-original-style="" style="box-sizing: border-box;">Supervise a lift scenario</li><li fr-original-style="" style="box-sizing: border-box;">Practical induction</li><li fr-original-style="" style="box-sizing: border-box;">Case studies lift plan exercise</li><li fr-original-style="" style="box-sizing: border-box;">Procedures for planning lifts</li></ul>Day 5:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">NPORS Theory Test</li><li fr-original-style="" style="box-sizing: border-box;">NPORS Practical Assessment</li><li fr-original-style="" style="box-sizing: border-box;">RAMS and Lift Plan Exercise</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.Good understanding of spoken and written English.

COURSE INFORMATION
The novice course is split into 4 days of training and one day of testing. 
By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.
Days 1-4:
Introduction
Explanation of qualifications
Legislation controlling crane operations
BS 7121 Explanation
LOLER regulations in detail
Crane appreciation
Crane stability
Accessories
Safe slinging
Mobile crane selection
Risk assessment and method statement
Supervise a lift scenario
Practical induction
Case studies lift plan exercise
Procedures for planning lifts
Day 5:
NPORS Theory Test
NPORS Practical Assessment
RAMS and Lift Plan Exercise
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.
Good understanding of spoken and written English.

NPORS Appointed Person (N401)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills operate to operate a Concrete Pump safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for concrete pump use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the concrete pump for use and operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Complete safe un-blocking and re-connecting procedures</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the concrete pump for cleaning and carry out cleaning tasks safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Store and transport implements and attachments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills operate to operate a Concrete Pump safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer and legislative requirements
Identify and maintain PPE appropriate for concrete pump use
Conduct all necessary safety checks at the work area
Prepare the concrete pump for use and operate machinery safely and efficiently
Complete safe un-blocking and re-connecting procedures
Prepare the concrete pump for cleaning and carry out cleaning tasks safely and efficiently
Understand environmental considerations
Store and transport implements and attachments
Carry out end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Concrete Pump (N211)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an Excavation Marshall - Banksperson</li><li fr-original-style="" style="box-sizing: border-box;">Have knowledge of the equipment to be used and be conversant with Method Statements, Risk Assessments and Permits to Work</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-excavating checks</li><li fr-original-style="" style="box-sizing: border-box;">Agree communication signals and emergency procedures</li><li fr-original-style="" style="box-sizing: border-box;">Safe positioning of Excavation Marshall - Banksperson</li><li fr-original-style="" style="box-sizing: border-box;">Define and identify the different types of underground services</li><li fr-original-style="" style="box-sizing: border-box;">Identify risks that excavations can present and how people may be affected</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Carry out exploratory tasks</li><li fr-original-style="" style="box-sizing: border-box;">Identify the risks of excavating near to underground services, and the safe digging practices that should be adopted</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and safe storage procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an Excavation Marshall - Banksperson
Have knowledge of the equipment to be used and be conversant with Method Statements, Risk Assessments and Permits to Work
Identify and maintain PPE appropriate for use
Conduct all pre-excavating checks
Agree communication signals and emergency procedures
Safe positioning of Excavation Marshall - Banksperson
Define and identify the different types of underground services
Identify risks that excavations can present and how people may be affected
Conduct all necessary safety checks at the work area
Carry out exploratory tasks
Identify the risks of excavating near to underground services, and the safe digging practices that should be adopted
Carry out all end of shift and safe storage procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Excavation Marshall - Banksperson (N027)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 360&deg; excavators to excavate and load materials.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for excavator use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Load material onto transporting vehicles or into containers</li><li fr-original-style="" style="box-sizing: border-box;">Reinstate excavation, grade and level ground</li><li fr-original-style="" style="box-sizing: border-box;">Fit and remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 360° excavators to excavate and load materials.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Identify and maintain PPE appropriate for excavator use
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks
Carry out excavating tasks
Load material onto transporting vehicles or into containers
Reinstate excavation, grade and level ground
Fit and remove attachments
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Excavator 360 (N202)

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">This course teaches you how to operate a mini / compact crane safely and productively.We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for mini compact crane use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational and running checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the mini compact crane for use and operate machine safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of work and shut down procedures</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
This course teaches you how to operate a mini / compact crane safely and productively.
We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify key controls and explain their functions
Set up exclusion zone
Identify and maintain PPE appropriate for mini compact crane use
Conduct all pre-operational and running checks in accordance with manufacturer’s and legislative requirements
Prepare the mini compact crane for use and operate machine safely and efficiently
Environmental considerations
Carry out all end of work and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Compact Crane (N140)

ObjectivesBy the end of the course, delegates should be able to:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a basic understanding of the industry and their roles and responsibilities&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate an understanding of the relevant regulations, standards and legislation</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Identify services on plans for water, gas, electricity and telecommunications&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Survey a site for visual indications of services being present&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Point out on the ground where services are, in relation to the plans</li><li fr-original-style="" style="box-sizing: border-box;"> Identify damage to samples of different types of underground apparatus&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate an understanding of the risks and implications of damaged underground apparatus  Conduct all pre-operation checks&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Correctly use the equipment to scan an area for underground apparatus and record the findings  Mark the site clearly to show the location of underground apparatus</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Correctly clean equipment, remove the battery pack and stow away.</li></ul><div fr-original-style="" style="box-sizing: border-box;"> </div>

Objectives
By the end of the course, delegates should be able to: 
Demonstrate a basic understanding of the industry and their roles and responsibilities
Demonstrate an understanding of the relevant regulations, standards and legislation
Identify services on plans for water, gas, electricity and telecommunications
Survey a site for visual indications of services being present
Point out on the ground where services are, in relation to the plans
Identify damage to samples of different types of underground apparatus
Demonstrate an understanding of the risks and implications of damaged underground apparatus  Conduct all pre-operation checks
Conduct all necessary safety checks at the work area
Correctly use the equipment to scan an area for underground apparatus and record the findings  Mark the site clearly to show the location of underground apparatus
Correctly clean equipment, remove the battery pack and stow away.

NPORS Cable Avoidance Tools (N304)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 4 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N205It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for rear tipping dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the rear tipping dumper for use &amp; operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 4 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N205

It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for rear tipping dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the rear tipping dumper for use & operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Rear Tipping Dumper (N205)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for dozer use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the dozer for use, operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Attach and set trailed, mounted attachments ready for work</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of implements and attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Location</h2></div>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Identify and maintain PPE appropriate for dozer use
Conduct all necessary safety checks at the work area
Prepare the dozer for use, operate machinery safely and efficiently
Attach and set trailed, mounted attachments ready for work
Understand environmental considerations
Storage and transport of implements and attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Dozer (N215)

The Real Estate Investor course primarily focuses on financial modelling and commercial considerations in the real estate industry across various sectors, geographies, and project types. This course is designed to provide participants with an in-depth understanding of development cash flow modelling, including the representation of risks associated with costs, methods of development financing, and considerations of investment assets.Apart from modelling office sectors, the course includes modelling of commercial residential development and retail investment assets. The course also expands the geographical investment universe to include modelling of real estate cash flows in a pan-European context, accounting for different indexation rules and methods.Overall, the Real Estate Investor course provides participants with advanced skills and knowledge required to successfully undertake real estate investment projects in a global context. Pre-requisite:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Completion of the Real Estate Analyst Course</li></ul> On this course you will&hellip;<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Revise operational models of real estate assets and stress for core income</li><li value="2" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Apply modelling techniques to an expanded range of real estate sectors and geographies</li><li value="3" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Consider both investment and development cash flows</li><li value="4" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand the sources and use of funds</li><li value="5" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Learn about typical debt covenants and how to incorporate them</li><li value="6" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Learn how to optimise debt structures</li></ul> Who will benefit from this course?<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Real Estate professionals at any level with exposure to real estate financial models</li><li value="2" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, debt structures and return metrics</li><li value="3" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Analysts and Modellers who are making the transition from corporate finance to real estate investment and development</li><li value="4" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Real Estate Analysts and Investors</li></ul> Course OutlineDay One<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Modelling international variations in real estate income streams i.e. Includes indexation patterns, rent caps, discounts/premiums to indexation, rent free periods, as well as how to deal with costs during vacancy</li><li value="2" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Modelling sector variations in real estate income streams i.e. Office versus industrial, retail &amp; leisure</li><li value="3" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Further senior debt covenants</li><li value="4" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Advance Rent Function techniques to manage feature rich lease structures</li></ul> Day Two<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Introduction to development appraisals</li><li value="2" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Residual models, site and profit calculations</li><li value="3" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Development cash flows versus Investment cash flows</li><li value="4" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Introduction to straight line versus S-curve costing</li><li value="5" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Phased asset sales in development appraisals</li><li value="6" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Discounting development cash flows</li><li value="7" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Complimentary return metrics for development appraisals</li><li value="8" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Introduction to development finance</li></ul> Included in the Course<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">CPD Accredited Certificate &amp; LinkedIn Proficiency Badge</li><li value="2" id="isPasted" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee</li><li value="3" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Course Files</li><li value="4" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)</li><li value="5" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Post Course Support - Two Months of Questions &amp; Answers, and One year of support is available for an additional fee</li></ul> For more information about the Real Estate Investor such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:E - s.musgrave@bayfieldtraining.comT - 01223 517851W - <a href="https://www.bayfieldtraining.com/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.bayfieldtraining.com/" data-airgap-id="125" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.bayfieldtraining.com</a>





The Real Estate Investor course primarily focuses on financial modelling and commercial considerations in the real estate industry across various sectors, geographies, and project types. This course is designed to provide participants with an in-depth understanding of development cash flow modelling, including the representation of risks associated with costs, methods of development financing, and considerations of investment assets.
Apart from modelling office sectors, the course includes modelling of commercial residential development and retail investment assets. The course also expands the geographical investment universe to include modelling of real estate cash flows in a pan-European context, accounting for different indexation rules and methods.
Overall, the Real Estate Investor course provides participants with advanced skills and knowledge required to successfully undertake real estate investment projects in a global context.


Pre-requisite:
Completion of the Real Estate Analyst Course


On this course you will…
Revise operational models of real estate assets and stress for core income
Apply modelling techniques to an expanded range of real estate sectors and geographies
Consider both investment and development cash flows
Understand the sources and use of funds
Learn about typical debt covenants and how to incorporate them
Learn how to optimise debt structures


Who will benefit from this course?
Real Estate professionals at any level with exposure to real estate financial models
Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, debt structures and return metrics
Analysts and Modellers who are making the transition from corporate finance to real estate investment and development
Real Estate Analysts and Investors


Course Outline
Day One
Modelling international variations in real estate income streams i.e. Includes indexation patterns, rent caps, discounts/premiums to indexation, rent free periods, as well as how to deal with costs during vacancy
Modelling sector variations in real estate income streams i.e. Office versus industrial, retail & leisure
Further senior debt covenants
Advance Rent Function techniques to manage feature rich lease structures


Day Two
Introduction to development appraisals
Residual models, site and profit calculations
Development cash flows versus Investment cash flows
Introduction to straight line versus S-curve costing
Phased asset sales in development appraisals
Discounting development cash flows
Complimentary return metrics for development appraisals
Introduction to development finance


Included in the Course
CPD Accredited Certificate & LinkedIn Proficiency Badge
Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee
Course Files
Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers, and One year of support is available for an additional fee


For more information about the Real Estate Investor such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Bayfield Training

Real Estate Finance

Financial Modelling

Financial Analysis

Microsoft Excel

Financial Risk Management

Professional Development

Continuous Professional Development (CPD)

The Real Estate Investor course primarily focuses on financial modelling and commercial considerations in the real estate industry across various sectors, geographies, and project types.

Real Estate Investor (Advanced Development Cash Flow Modelling in Excel)

General Admission

Course price is £395.00 + Vat @20% (£474 total) 
(We raise a seperate VAT invoice following payment)
This Renewables Technical Surveying training, short two day course, is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Renewables Technical Site Surveying prior to any renewables installation measures, this includes for heating systems, solar systems and EV Charge point installations. 
The course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewables Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable individuals with a basic level of knowledge in varying building structures, heating systems and varying renewable technologies.
Note: A minimum number of 5 deligates is required. If the course is under subscribed you will be asked to re-arrange your course date.
  During this technical training course we will provide the following:
Day 1 - (Morning) Build Surveying Knowledge
Procuring the correct technical surveying equipment
Procuring and downloading technical surveying software packages
Identifying the differences in Home Heating products and their various characteristics
The basics of Heat pumps & low temperature hydronics
Identifying typical heating pipework and heating system elements
Identifying suitable locations for the Installation of Heat Pumps & Hot Water Cylinders
Carrying out MCS020 compliant Noise Level Assessments
Local Planning restrictions in England & Wales, Scotland & Northern Ireland
Preparing for typical homeowner questions around low temperature heating, solar systems and battery storage
Day 1 - (Afternoon) Solar Surveying & Regulatory Renewable Standards
Gathering reliable site data for Solar System design
Identification of typical Rooflines & Tile configurations for Solar Panel Installations
Identification of possible shading to proposed roofline areas
Gathering details of rafter dimensions and roof pitch angles
Identification of Meters and Earth Bonding Arrangement
Identifying safe and compliant locations for battery storage facilities
Day 2 - (Morning) Carrying out effective site surveying techniques
Completing fully detailed digital building floor plans & renewable energy reports
How to provide relevant and useful site video evidence
360 Images - how to take them & their benefits
Completing detailed form information for basic health & safety purposes
Completing detailed form information for current Building Construction Elements
Completing detailed form information for current Heating System Elements
Correct trade insurance levels for Renewables Surveyors
Day 2 - (Afternoon) Using Technology to enhance survey data
Task 1 - Group activity using 360 walkthrough - Carry out detailed Surveying for producing heat loss calculations using digital floor plan software and digital form data we take you through the process
Task 2 - Individual activity - Carry out a detailed Survey for producing heat loss calculations & Solar survey from data provided
Multiple Choice Learning Check
Set out home task (Optional) - complete a survey on your own home using the provided software, which the learner will then receive feedback on.
The course will provide learners with intuitive guidance on how to set up surveying software and fully complete renewables technical site surveys using digital floor planning software, efficient use of digital survey forms, as well as having access to our full range of really helpful surveyor resources.



Building Metrix

Solar Installation

Surveying

Renewable Energy

Heat Pump

Building Surveying

Heat Pump Installation

Heating Engineer

This Renewables Technical Surveying training short two day course is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Renewables Technical Site Surveying prior to any renewables installation measures, this includes for heating systems, solar systems and EV Charge point installations. 
The course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewable Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable individuals with a basic level of knowledge in varying building structures, heating systems and varying renewable technologies.   


28/29 November '24 - Renewables Technical Surveying Course (Two Days - £395+Vat)

Course Fee inclusive of VAT

Maximise your returns in property by building a smarter property business.


Think commercially to increase your returns, decrease your capital investment and maximise your upside potential.
Portfolio Acquisition
Company Take Over
Planning Gain
Free Land
Title Splitting
Conversion & Development






Build a property business
Take an entrepreneurial approach to the property business by learning a low-capital, income-maximising approach. 
 Build your recurring rental income without requiring ownership.
How the right management solution can create an irresistible offer to your clients, that supercharges your returns.



Property SQ2

Property Management

Property Investment

Portfolio Management

Property Development

Build a smarter property business.  Entrepreneurial Property Strategies.  Treat property like a business and supercharge your investment returns.

Smart Property Business Builder

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Dover.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Liverpool

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Bromley

ECS Card Health & Safety Course Dover

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Kent.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Kent

ECS Card Health & Safety Course Newcastle

<h2 id="isPasted" fr-original-style="" style="box-sizing: border-box;"> </h2>This advanced financial modelling course will benefit Real Estate Professionals looking to develop their financial modelling skills to the next level. This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models. On this course you will...<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Understand how the application and use of Structured Finance products in Real Estate</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Learn how to introduce several tranches of debt in a development project</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Understand how to model different parties to a project</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Create Joint Venture structures between Developers, Lenders and Equity Partners</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Learn advanced modelling techniques to analyse underlying asset risk</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Understand how underlying asset risk impacts return to all parties to a project</li></ul> Who will benefit from this course?<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Real Estate professionals from a mid to senior level with exposure to Real Estate financial models</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, portfolio analysis, and risk analysis</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Real Estate Investors who would like to expand their knowledge and understanding of Real Estate cash flow models to an advanced level</li></ul> Course Outline:<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Mezzanine debt modelling</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Joint Venture structures between developers and lender/equity partners</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Promote and profit share structure calculations</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Advanced project cash flows with mezzanine debts</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Key Real Estate and investment risks, risk adjustment of exit yields</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Sensitivity and Scenario Analysis</li><li value="7" fr-original-style="" style="box-sizing: border-box;">Monte Carlo Analysis</li></ul> Included in the Course<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">CPD Accredited Certificate &amp; LinkedIn Proficiency Badge</li><li value="2" id="isPasted" fr-original-style="" style="box-sizing: border-box;">Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Course Files</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Post Course Support - Two Months of Questions &amp; Answers, and One year of support is available for an additional fee</li></ul> For more information about the Real Estate Modelling Masterclass such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:E - s.musgrave@bayfieldtraining.comT - 01223 517851W - <a href="https://www.bayfieldtraining.com/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.bayfieldtraining.com/" data-airgap-id="125" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.bayfieldtraining.com</a>



This advanced financial modelling course will benefit Real Estate Professionals looking to develop their financial modelling skills to the next level. This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models.


On this course you will...
Understand how the application and use of Structured Finance products in Real Estate
Learn how to introduce several tranches of debt in a development project
Understand how to model different parties to a project
Create Joint Venture structures between Developers, Lenders and Equity Partners
Learn advanced modelling techniques to analyse underlying asset risk
Understand how underlying asset risk impacts return to all parties to a project


Who will benefit from this course?
Real Estate professionals from a mid to senior level with exposure to Real Estate financial models
Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, portfolio analysis, and risk analysis
Real Estate Investors who would like to expand their knowledge and understanding of Real Estate cash flow models to an advanced level


Course Outline:
Mezzanine debt modelling
Joint Venture structures between developers and lender/equity partners
Promote and profit share structure calculations
Advanced project cash flows with mezzanine debts
Key Real Estate and investment risks, risk adjustment of exit yields
Sensitivity and Scenario Analysis
Monte Carlo Analysis


Included in the Course
CPD Accredited Certificate & LinkedIn Proficiency Badge
Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee
Course Files
Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers, and One year of support is available for an additional fee


For more information about the Real Estate Modelling Masterclass such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Financial Modelling & Analysis

Investment Management

This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models.

Real Estate Modelling Masterclass (Advanced Cash Flow Modelling)

Are you looking to enter the dynamic world of real estate?Our course is designed to equip you with the knowledge and tools you need to communicate effectively with real estate professionals and develop key skills in real estate investment strategy and analytics.At the end of the course, you&#39;ll be able to read and interpret real estate market reports, and have a firm grasp of how iconic buildings, cities, and companies fit into the overall picture of the real estate sector. On this course, you will&hellip;<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Become familiar with the players, structure, general terminology and overall needs of Real Estate.</li><li fr-original-style="" style="box-sizing: border-box;">Learn what is Real Estate and why it is different from other asset classes</li><li fr-original-style="" style="box-sizing: border-box;">Get to grips with the overall size and structure of the UK Real Estate Market</li><li fr-original-style="" style="box-sizing: border-box;">Learn and analyse the links between the different parts of the property market</li><li fr-original-style="" style="box-sizing: border-box;">Understand who works in the Real Estate Market, their qualifications and their job descriptions</li><li fr-original-style="" style="box-sizing: border-box;">Recognise how and when to use basic real estate concepts: Rent, Value, Yield, Risk and Return, etc&hellip;</li><li fr-original-style="" style="box-sizing: border-box;">Learn how to read a real estate market report</li><li fr-original-style="" style="box-sizing: border-box;">Understand how current affairs, politics and economics affects Real Estate Investment</li><li fr-original-style="" style="box-sizing: border-box;">Use household names and iconic companies, cities and buildings to help consolidate your appreciation of this exciting sector</li></ul> Who will benefit from this course:<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Graduates or undergraduates studying economics, finance.</li><li fr-original-style="" style="box-sizing: border-box;">Professionals working in Marketing or Accounting teams within Real Estate firms.</li><li fr-original-style="" style="box-sizing: border-box;">APC students.</li><li fr-original-style="" style="box-sizing: border-box;">Anyone interested in Real Estate.</li><li fr-original-style="" style="box-sizing: border-box;">School leavers/A-Level Students looking to gain an understanding of Real Estate.</li><li fr-original-style="" style="box-sizing: border-box;">Non cognate students who wish to transfer into Real Estate/Finance careers.</li></ul> Course OutlineModule 1: What is and why buy Real Estate?<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">The property Market</li><li fr-original-style="" style="box-sizing: border-box;">The Size and Structure of the UK property market</li><li fr-original-style="" style="box-sizing: border-box;">The impact of Real Estate in the Economy</li></ul> Module 2: The Real Estate Market System<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">The Space Market</li><li fr-original-style="" style="box-sizing: border-box;">The Asset Market</li><li fr-original-style="" style="box-sizing: border-box;">The Development Market</li></ul> Module 3: How to value Real Estate<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">An Introduction to Financial Mathematics</li><li fr-original-style="" style="box-sizing: border-box;">The difference between Price, Value and Worth</li><li fr-original-style="" style="box-sizing: border-box;">Property Yield</li><li fr-original-style="" style="box-sizing: border-box;">Conventional Valuation Methods</li></ul> Module 4: How to read a Real Estate Market Report<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Property Market Indicators: Stock Indicators</li><li fr-original-style="" style="box-sizing: border-box;">Property Market Indicators: Investment Indicators</li></ul> Module 5: Who works in Real Estate?<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">The build Environment by Cobalt Recruitment</li><li fr-original-style="" style="box-sizing: border-box;">Rea; Estate Agents</li><li fr-original-style="" style="box-sizing: border-box;">Examples of Real Estate Market Agents CVs</li><li fr-original-style="" style="box-sizing: border-box;">Real Estate Network</li></ul> Included in the Course<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">CPD Accredited Certificate</li><li fr-original-style="" style="box-sizing: border-box;">12 Months Access to the Course</li><li fr-original-style="" style="box-sizing: border-box;">Course Files</li><li fr-original-style="" style="box-sizing: border-box;">Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)</li><li fr-original-style="" style="box-sizing: border-box;">Post Course Support - Two Months of Questions &amp; Answers, and One year of support is available for an additional fee</li></ul> For more information about the Introduction to Real Estate, please contact Sam on the Bayfield Training Sales team:E - s.musgrave@bayfieldtraining.comT - 01223 517851W - <a href="https://www.bayfieldtraining.com/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.bayfieldtraining.com/" data-airgap-id="125" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.bayfieldtraining.com</a>

Are you looking to enter the dynamic world of real estate?
Our course is designed to equip you with the knowledge and tools you need to communicate effectively with real estate professionals and develop key skills in real estate investment strategy and analytics.
At the end of the course, you'll be able to read and interpret real estate market reports, and have a firm grasp of how iconic buildings, cities, and companies fit into the overall picture of the real estate sector.


On this course, you will…
Become familiar with the players, structure, general terminology and overall needs of Real Estate.
Learn what is Real Estate and why it is different from other asset classes
Get to grips with the overall size and structure of the UK Real Estate Market
Learn and analyse the links between the different parts of the property market
Understand who works in the Real Estate Market, their qualifications and their job descriptions
Recognise how and when to use basic real estate concepts: Rent, Value, Yield, Risk and Return, etc…
Learn how to read a real estate market report
Understand how current affairs, politics and economics affects Real Estate Investment
Use household names and iconic companies, cities and buildings to help consolidate your appreciation of this exciting sector


Who will benefit from this course:
Graduates or undergraduates studying economics, finance.
Professionals working in Marketing or Accounting teams within Real Estate firms.
APC students.
Anyone interested in Real Estate.
School leavers/A-Level Students looking to gain an understanding of Real Estate.
Non cognate students who wish to transfer into Real Estate/Finance careers.


Course Outline
Module 1: What is and why buy Real Estate?
The property Market
The Size and Structure of the UK property market
The impact of Real Estate in the Economy


Module 2: The Real Estate Market System
The Space Market
The Asset Market
The Development Market


Module 3: How to value Real Estate
An Introduction to Financial Mathematics
The difference between Price, Value and Worth
Property Yield
Conventional Valuation Methods


Module 4: How to read a Real Estate Market Report
Property Market Indicators: Stock Indicators
Property Market Indicators: Investment Indicators


Module 5: Who works in Real Estate?
The build Environment by Cobalt Recruitment
Rea; Estate Agents
Examples of Real Estate Market Agents CVs
Real Estate Network


Included in the Course
CPD Accredited Certificate
12 Months Access to the Course
Course Files
Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers, and One year of support is available for an additional fee


For more information about the Introduction to Real Estate, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Are you looking to enter the dynamic world of real estate?

Our course is designed to equip you with the knowledge and tools you need to communicate effectively with real estate professionals and develop key skills in real estate investment strategy and analytics.

At the end of the course, you'll be able to read and interpret real estate market reports, and have a firm grasp of how iconic buildings, cities, and companies fit into the overall picture of the real estate sector.



On this course, you will…

Become familiar with the players, structure, general terminology and overall needs of Real Estate.
Learn what is Real Estate and why it is different from other asset classes
Get to grips with the overall size and structure of the UK Real Estate Market
Learn and analyse the links between the different parts of the property market
Understand who works in the Real Estate Market, their qualifications and their job descriptions
Recognise how and when to use basic real estate concepts: Rent, Value, Yield, Risk and Return, etc…
Learn how to read a real estate market report
Understand how current affairs, politics and economics affects Real Estate Investment
Use household names and iconic companies, cities and buildings to help consolidate your appreciation of this exciting sector


Who will benefit from this course:

Graduates or undergraduates studying economics, finance.
Professionals working in Marketing or Accounting teams within Real Estate firms.
APC students.
Anyone interested in Real Estate.
School leavers/A-Level Students looking to gain an understanding of Real Estate.
Non cognate students who wish to transfer into Real Estate/Finance careers.


Course Outline

Module 1: What is and why buy Real Estate?

The property Market
The Size and Structure of the UK property market
The impact of Real Estate in the Economy


Module 2: The Real Estate Market System

The Space Market
The Asset Market
The Development Market


Module 3: How to value Real Estate

An Introduction to Financial Mathematics
The difference between Price, Value and Worth
Property Yield
Conventional Valuation Methods


Module 4: How to read a Real Estate Market Report

Property Market Indicators: Stock Indicators
Property Market Indicators: Investment Indicators


Module 5: Who works in Real Estate?

The build Environment by Cobalt Recruitment
Rea; Estate Agents
Examples of Real Estate Market Agents CVs
Real Estate Network


333 Courses in Coventry

NPORS Suction Excavator (N021)

By Dynamic Training and Assessments Ltd

NPORS Excavator 180 (N201)

By Dynamic Training and Assessments Ltd

NPORS Appointed Person (N401)

By Dynamic Training and Assessments Ltd

NPORS Concrete Pump (N211)

By Dynamic Training and Assessments Ltd

NPORS Excavation Marshall - Banksperson (N027)

By Dynamic Training and Assessments Ltd

NPORS Excavator 360 (N202)

By Dynamic Training and Assessments Ltd

NPORS Compact Crane (N140)

By Dynamic Training and Assessments Ltd

NPORS Cable Avoidance Tools (N304)

By Dynamic Training and Assessments Ltd

NPORS Rear Tipping Dumper (N205)

By Dynamic Training and Assessments Ltd

NPORS Dozer (N215)

By Dynamic Training and Assessments Ltd

Search By Location