2797 Courses in Chesterfield

Our training programme will provide those involved at any stage of the process for procuring goods and/or services within their organisations with the knowledge and skillset to identify and mitigate the threat posed by the breadth and multi-layered complexity of procurement fraud, corruption and associated financial crime and money laundering.

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

QA Level 2 Award In Working At Height (RQF) Face to Face: Half-day course Virtual Classroom: Spread over 2 sessions of 2½ hr duration Raises awareness of safety considerations whilst working at height Teaches how to ensure a safe working environment Course Contents: Legislation, regulations, roles and responsibilities when working at height The consequences of non-compliance Safe working practices when working at height How to reduce the risks from:Weather conditionsWorking environmentsOthers working at heightFalling objectsFragile surfaces Importance of risk assessments Rescue plan requirements Selecting appropriate equipment Identifying safety precautions when using equipment Importance of Personal hygiene Reporting procedures when equipment is faulty Benefits of this course: 35 People died in 2017/18 due to falls from height There were also 43,000 non-fatal accidents due to falls from height These resulted in 80 major injuries And 230 over-3-day absences, costing employees and employers money Even just a height of less than 2 meters can result in serious, or even fatal, injuries The Work at Height Regulations 2005 require employers, and those in charge of any type of work at height activity to ensure that the work is properly planned, well supervised and carried out by competent people Employees who do this course will learn to have a greater awareness of the risks involved in working at height, and on how to best manage those risks, ensuring the safety of all concerned Accredited, Ofqual regulated qualification: This Health and Safety Training Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Health and Safety Certificate fulfils the legal requirements and is an excellent way to make sure you and your employees are trained in Health and Safety.The Ofqual Register number for this course is 603/2687/6

These comprehensive Total Electrical 20 training courses fully meet the qualification certification requirements of Part P schemes and are aimed at non-electrical and electrical persons wishing to up-skill or re-train. The aim of the Total Electrical 20 training courses is to provide a level of competence, which will allow work to be safely and efficiently carried out on Electrical Equipment and Systems all within a 4 or 6 week period. A 4 week Total Electrical 20 training course which gives you the foundation knowledge you need to commence working as a domestic electrician. The Total Electrical 20 training courses are a mixture of both practical work and theoretical study, with the emphasis being put on as much practical as possible. This Total Electrical 20 training course can be supplemented to a 6 week course with additional modules to enhance your existing skills and therefore widen your market. The Total Electrical 20 training courses are designed to be as PRACTICAL as they possibly can be, with over 50% of the course time being practical, because we believe that the best way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there… There are NO hidden costs on our courses, everything is included. The above Total Electrical 20 training courses are inclusive of examination registration entry fees, stationary, and a FREE tool kit*. All test instrumentation required for the course will be available for use during the course, should you require to purchase you own, advice will be readily available to assist you with your selection. These items can either be pre-ordered or purchased during the course.

The main objective of the Basic Electrical Generic Module is to give you the foundation knowledge and electrical ‘vision’ to fundamentally understand how and why an electrical system works and allow you to develop with confidence and competence.

These comprehensive Total Electrical 20 training courses fully meet the qualification certification requirements of Part P schemes and are aimed at non-electrical and electrical persons wishing to up-skill or re-train. The aim of the Total Electrical 20 training courses is to provide a level of competence, which will allow work to be safely and efficiently carried out on Electrical Equipment and Systems all within a 4 or 6 week period. A 4 week Total Electrical 20 training course which gives you the foundation knowledge you need to commence working as a domestic electrician. The Total Electrical 20 training courses are a mixture of both practical work and theoretical study, with the emphasis being put on as much practical as possible. This Total Electrical 20 training course can be supplemented to a 6 week course with additional modules to enhance your existing skills and therefore widen your market. The Total Electrical 20 training courses are designed to be as PRACTICAL as they possibly can be, with over 50% of the course time being practical, because we believe that the best way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there… There are NO hidden costs on our courses, everything is included. The above Total Electrical 20 training courses are inclusive of examination registration entry fees, stationary, and a FREE tool kit*. All test instrumentation required for the course will be available for use during the course, should you require to purchase you own, advice will be readily available to assist you with your selection. These items can either be pre-ordered or purchased during the course.

The Gold Card Training Programme is the most comprehensive electrician course available. We offer weekday, weekend and evening delivery options. JIB ECS (Gold) Card is quickly becoming a necessity when seeking work on commercial sites, or sub-contracting to larger contractors.

The shortage of electricians has lead to an increased demand nationwide and in turn a sharp rise in salary. Our training solutions can help you gain nationally recognised qualifications such as City & Guilds and NVQ. Not only you will train in state-of-the-art training centres, but you can also have the opportunity to attain the Work Based Performance Units and complete a portfolio of diverse evidence of onsite work.

FAA Level 1 Award In Awareness Of First Aid For Mental Health (RQF) Classroom (4.5 hour course), Virtual (2 x 2 ½ hour sessions) Gives learners a good awareness of Mental Health First Aid Gives learners the skills to start that difficult conversation Course Contents: What is Mental Health? Why people develop mental health conditions What the role of a mental health first aider is Knowing how to provide advice and practical support Knowing how to recognise and manage stress Recognising a range of mental health conditions: Depression Anxiety Psychosis Eating disorders Suicide Self-harm Benefits of this course: 37% of all work-related ill-health is due to mental health problems Problems with mental health cover 45% of all working days lost A whopping 12.8 million working days, or 49, 042 years, were lost due to mental health problems in 2018/19 602,000 workers suffered from work-related stress, depression or anxiety in 2018/19 One in four people will have a mental health problem at some point during their lives Whether work is causing or aggravating mental health problems, employers have a legal responsibility towards their employees Work-related mental health issues must to be assessed to measure the levels of risk to staff Where a risk is identified, steps must be taken to remove it or reduce it as far as reasonably practicable This half day course gives people a good awareness of mental health in the workplace For a more complete introduction, see our full day First Aid for Mental Health or two day Supervising First Aid for Mental Health courses Accredited, Ofqual regulated qualification This Awareness of Mental Health First Aid Course is a nationally recognised, Ofqual regulated qualification accredited by First Aid Awards. This means that you can be rest assured that your Mental Health First Aid Certificates fulfil the upcoming legal requirements and are a very good way to make sure you and your employees have a supporting workplace to deal with staff's mental health conditions. The Ofqual Register number for this course is 603/3768/0

The qualification consists of a written examination and an assignment, before attempting this qualification, candidates should seriously consider completing 2391-52 and have achieved 2382-18 or similar qualifications where knowledge and understanding of BS7671 18th edition