2797 Courses in Chesterfield

A five day Refrigeration Electrics Maintenance course aimed at anyone involved with refrigeration, air conditioning and heat pump electrical control systems. The Refrigeration Electrics Maintenance course covers the three elements which are common to most refrigeration and air conditioning systems, namely, protection, control and motors. For example, a typical air conditioning split system will have protection provided by the fuse in the fused connection unit, and further protection provided to the cable feeding the fused connection unit, probably by a circuit breaker, control provided by thermostat and time clock etc… and motor driven fans and compressor. During the Refrigeration Electrics Maintenance course emphasis is also placed upon the applicable wiring regulations to ensure the constructed system is compliant with BS7671:2018 The aim of the Refrigeration Electrics Maintenance course is to provide enough knowledge to allow maintenance and fault finding to be safely and effectively carried out. The Refrigeration Electrics Maintenance course comprises of: Essential Electrics Module City and Guilds 2382-22 Level 3 – 18th Edition Wiring Regulations Refrigeration Electrics Module The Refrigeration Electrics Maintenance course costs include examination entry fees.

SAFE ISOLATION, ELECTRICAL SAFETY & ELECTRICAL CONCEPTSThe Essential Electrics course is for engineers who need to work on electrical systems, but may not have any formal qualifications to do so. Essential Electrics is the perfect course for engineers who need to comply with the Electricity at Work Act of 1989.The Essential Electrics course covers the safe isolation of equipment, using test equipment and testing repairs prior to energising.Candidates will need to demonstrate that they can undertake simple wiring tasks such as safe isolations, basic wiring and testing repairs.

The F Gas Regulations course will suit any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas Regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulation). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

The Refrigeration Electrics 1 day course is aimed at anyone involved with refrigeration, air conditioning & heat pumps electrical control systems The course covers the three elements which are common to most refrigeration and air conditioning systems: protection, control, and motors. A typical refrigeration system will have protection provided by the fuse in the fused connection unit, further protection provided to the cable feeding the fused unit – probably by a circuit breaker, control provided by thermostat/time clock, etc, motor driven fans, pump & compressor. The aim of the course is to provide enough knowledge to allow maintenance and fault finding to be carried out safely and effectively.

QA Level 3 Award In First Aid At Work (RQF) Three-day course Gives learners the knowledge and skills to be a first aider Recommended by HSE for high risk workplaces Course Contents: The Roles and Responsibilities of an Emergency First Aider Assessing an Incident Minor Injuries Cuts, Grazes and Bruises Minor Burns and Scalds Managing an Unresponsive Casualty CPR Safe Use of an AED (Automated External Defibrillator) Choking Seizures Wounds and Bleeding Shock Eye Injuries Angina Heart Attack Stroke Asthma Diabetes Anaphylaxis Head Injuries Spinal Injuries Chest Injuries Fractures Sprains, Strains and Dislocations Poisoning Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work The estimated cost of injuries and ill health last year was £15 billion The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes carrying out a risk assessment, appointing a suitable amount of first aiders and providing adequate first aid training Typically, first aiders will hold a valid certificate in either First Aid at Work (FAW) or Emergency First Aid at Work (EFAW) Our QA Level 3 Award in First Aid at Work (RQF) - FAW - training course is the one recommended for first aiders in a high risk workplace Having the correct first aid provision in the workplace is not just a legal requirement, it is incredibly important for the safety of all members of staff! As this is a Regulated Qualification, employers can book this course for their employees in the safe knowledge that they have fulfilled their legal responsibilities for providing quality first aid training, without having to undertake any lengthy due diligence checks Accredited, Ofqual regulated qualification: Our First Aid at Work (FAW) course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards. This means that you can be rest assured that your First Aid at Work Certificate fulfills the legal requirements and is a very good way to make sure you and your employees are trained in First Aid, having the ability to save lives should the situation occur. The Ofqual Register number for this course is 603/2384/X

Highfield Level 1 Award In Health And Safety Within A Construction Environment (RQF) Highfield Level 1 Award in Health and Safety within a Construction Environment (RQF) One day course For those applying for the Green Labourer CSCS Card Includes the Health, Safety, Environment Test For Operatives and Specialists book or DVD by CITB! Face to Face: One day course + time for self-study required This course is supported by the Construction Industry Training Board (CITB) This course is designed to give learners a route to applying for the Green Labourer CSCS Card Course Contents: The purpose of a risk assessment The purpose of a method statement The legal requirements of risk assessments and method statements The common causes of work-related fatalities and injuries The implications of not preventing accidents and ill-health at work Health and safety definitions Hazards and potential risks of a a range of situations The importance of reporting accidents and near misses Accident reporting procedures Risk assessments and dynamic risk assessments The reasons for using safe manual handling in the workplace The employees' responsibilities under current legislation and official guidance in relation to manual handling in the workplace The procedures for safe manual handling Working at height Employees' legal responsibilities in relation to working at height Potential hazards when working at height Controlling risks and hazards while working at height Regulations regarding working at height COSHH: substances hazardous to health Common risks to health within a construction environment Drugs and alcohol Personal Hygiene Asbestos PPE (Personal Protective Equipment) Working around plant and equipment safely Benefits of this course: In 2018/19, 1.4 million people suffered from a work-related illness They have a much higher rate of work-related ill-health than those working in many other industries Construction workers have the highest rate of musculoskeletal disorders compared to other occupations This course develops learners’ knowledge and understanding of health and safety in a construction environment so they can work safely on a construction site Those who successfully complete this Level 1 Award in Health and Safety in a Construction Environment and have completed the CITB Health, Safety & Environment Test within the last 2 years can then apply for a Green Labourer CSCS card. Our Health And Safety In A Construction Environment Training Course is a nationally recognised, Ofqual regulated qualification accredited by Highfields Qualifications. This course leads to the obtainment of the CSCS labour card, allowing workers to work on construction sites. The Ofqual Register number for this course is 603/2442/9

QA Level 2 Award In Activity First Aid (RQF) Two-day course Especially suited to those working in sports or outdoor activities Have the skills to save lives and help injured heal faster Course Contents: The Roles and Responsibilities of an Emergency First Aider Assessing an Incident Minor Injuries Cuts, Grazes and Bruises Minor Burns and Scalds Managing an Unresponsive Casualty CPR Safe Use of an AED (Automated External Defibrillator) Choking Seizures Wounds and Bleeding Shock Eye Injuries Angina Heart Attack Stroke Asthma Diabetes Anaphylaxis Head Injuries Spinal Injuries Chest Injuries Fractures Sprains, Strains and Dislocations Poisoning Treatment for hot and cold temperatures Benefits of this course: Both Outdoor and Indoor Sports activities run a great risk of injury Would you know what to do if someone in your charge got injured or taken ill? The QA Level 2 Award in Activity First Aid (RQF) is a regulated and nationally recognised qualification designed for those who have a responsibility to provide first aid in outdoor and activity based environments As with all our courses, this course is run in a fun and engaging, interactive and hands-on way Accredited, Ofqual regulated qualification: Our Activity First Aid course leads to a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards. This means that you can be rest assured that your Activity First Aid fulfils the legal requirements and is a very good way to make sure you and your employees are trained in First Aid, having the ability to save lives and speed healing should the situation occur. The Ofqual Register number for this course is 603/2652/9

The Central Heating Controls Wiring and Fault Finding course is a two day-day short course aimed at anyone involved in the construction, commissioning, inspection & testing or maintenance of central heating electrical control systems. The Central Heating Controls Wiring and Fault Finding course covers all the commonly used control systems in use today and is focused on the ‘practical’ construction and commissioning along with the relevant fault finding techniques. The Central Heating Controls Wiring and Fault Finding course requires an understanding of electrical principles and cable termination skills. A requirement of this course is the successful completion of their Essential Electrics examination prior to sitting the central heating controls wiring & fault finding examinations. Please ring if clarification is needed on this point. There are two 20 minute open book examinations and the associated practical assessments. A third examination and associated assessment will be required for candidates not holding the Essential Electrics unit. The Central Heating Controls Wiring and Fault Finding course comprises of: Short theory sessions introducing the conventional wiring systems, ‘Y’ Plan, ‘S’ Plan, ‘C’ Plan, Etc. Detailed practical workshop sessions, undertaking the construction, testing and commissioning of systems Fault finding and maintenance tasks performed on working systems Examination and practical assessment preparation ready for the assessments Evaluation of the system control function (why and how it works) Each student will work on their own system, and will have plenty of time to absorb and understand how each systemworks. Advise will be given on suitable ‘tooling’ and test equipment. These are nationally recognizable qualifications which are fast becoming an essential requirement for this type of work. The course costs include comprehensive course notes and examination entry fees.

QA Level 2 Award In Basic Life Support And Safe Use Of An Automated External Defibrillator (RQF) Half day course This course provides candidates with the skills needed to administer safe, prompt and effective basic life support and use an AED Also available as a bolt-on to other courses Course Contents: The Chain of Survival Primary Survey Managing an Unresponsive Casualty Recovery Position CPR Safety Barriers CPR Safe Use of an AED (Automated External Defibrillator) AED Practical Benefits of this course: Sudden cardiac arrest is one of the UK’s biggest killers With an estimated 60,000 out of hospital cardiac arrests occurring every year in the UK alone, make sure you are prepared! Following a cardiac arrest, every minute without CPR and defibrillation reduces a casualty’s chance of survival by 10% Most of the British public are unaware of the life-saving difference they can make by performing CPR and defibrillation AEDs are easy to use and save lives This Basic Life Support and Safe Use of an Automated External Defibrillator qualification has been designed to provide candidates with the skills needed to administer safe, prompt and effective basic life support and use an AED safely in emergency situations Accredited, Ofqual regulated qualification: Our Basic Life Support and Safe Use of an Automated External Defibrillator training course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Basic Life Support and Safe Use of anAED Certificate fulfils the legal requirements. It is a very good way to make sure you and your employees are trained in how to use an AED safely.The Ofqual Register number for this course is 603/2402/8

This qualification is ideal for anyone who prepares and serves food, as it provides learners with a basic understanding of nutrition and the requirements of special diets to enable the planning and provision of well-balanced meals that will have a positive impact on health.