- Professional Development
- Medicine & Nursing
- Arts & Crafts
- Health & Wellbeing
- Personal Development
504 Courses in Birmingham
Infection Control
By Prima Cura Training
Infection prevention and control is essential for all businesses, particularly where the working environment or work activities could put employees and those around them at risk of infection. This includes those working in healthcare, in close contact with people or animals, and those involved in the cleaning of human and animal waste. Infections can be easily spread, but by understanding the correct steps to take, the risk of their occurrence can be both prevented and controlled.
DIPLOMA IN FLOORCOVERING OCCUPATIONS (CONSTRUCTION)
By Oscar Onsite
REFERENCE CODE 603/5285/1 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview Who is this qualification for? This is a work-based learning qualification for those involved in laying floorcoverings in a Construction related working environment. Although many of the skills and knowledge across floorcovering occupations are generic, not all those employed to fit floorcoverings will be fitting the same product. The group of optional units will allow specialisms of timber based, textile and resilient floorcoverings. What is required from candidates? To achieve this pathway unit the survey work must be carried out in ways that will minimise the risk of damage to the work and surrounding area and using and maintaining equipment effectively. This qualification is made up of 9 mandatory units and a group of optional units. The minimum credit value of this qualification is 127 credits. Qualifications are now required to indicate the total qualification time (TQT), this is to show the typical time it will take someone to attain the required skills and knowledge to meet the qualification criteria, this qualification has a TQT of 1,270 hours. Qualifications are also required to indicate the number of hours of teaching someone would normally need to gain the skills and knowledge to achieve the qualification. These are referred to as Guided Learning Hours (GLH). The GLH for this qualification is 543 Mandatory units Level Credit Conforming to General Health, Safety and Welfare in the Workplace Conforming to Productive Working Practices in the Workplace Moving, Handling and Storing Resources in the Workplace Surface preparation to receive floorcoverings in the workplace Setting out for laying floorcoverings in the workplace Preparing and fitting underlays for floorcoverings in the workplace Develop customer relationships Assessing and preparing background surfaces for floor-covering in the workplace Assessing and evaluating conditions for floorcoverings in the workplace Optional Units (Minimum of 18 credits) Installing timber–based floorcoverings in the workplace Summary of the: GQA NVQ LEVEL 2 DIPLOMA IN FLOORCOVERING OCCUPATIONS (CONSTRUCTION) Installing textile floorcoverings in the workplace Installing resilient floorcoverings in the workplace Types of evidence: Evidence of knowledge is required. Evidence of knowledge through performance can contribute and if applicable should be demonstrated by completing projects and reports, by responding to questions or through Professional/Guided Discussions. Quantity of evidence: Evidence should show that you can meet the requirements of the units consistently over an appropriate period of time. Potential sources of evidence: Suggested sources of evidence are shown above, these can be supplemented by physical or documentary evidence, e.g.: Accident book/reporting system Notes and memos Safety record Telephone/e-mail records Training record Customer and colleague feedback Audio evidence Records of equipment and materials Witness testimonies Work records Photographic/ video evidence Please Note that photocopied or downloaded documents such as manufacturers or industry guidance, H&S policies, Risk Assessments etc, are not normally acceptable evidence for GQA qualifications unless accompanied by a record of a professional discussion or assessor statement confirming candidate knowledge of the subject. If you are in any doubt about the validity of evidence, please contact Oscar Onsite Academy
Coaching Leaders for High-Impact Performance
By Elite Forums UK
Course Duration: Half-day or full-day program (with virtual delivery options) Target Audience: Mid-to-senior level leaders, executives, managers, HR professionals, and leadership development coaches looking to enhance their leadership capabilities and create high-performing teams. Course Objectives By the end of this course, participants will be able to: Understand the role of coaching in leadership development and high-impact performance. Learn effective coaching strategies to inspire and elevate team performance. Develop skills in active listening, providing feedback, and fostering accountability. Enhance their ability to set clear goals, motivate teams, and create a culture of continuous improvement. Build an action plan for coaching their teams towards high-impact performance. Course Outline Module 1: The Role of Leadership in High-Impact Performance What defines high-impact leadership and performance? The difference between managing and coaching: leadership approaches that drive results The impact of leadership on organisational culture, productivity, and morale Essential leadership competencies for driving high performance Module 2: The Coaching Mindset Understanding the coaching mindset: shifting from directive leadership to empowering leadership Coaching as a tool for leadership development and team performance The benefits of a growth mindset in leadership and performance Key attributes of an effective coach: empathy, active listening, emotional intelligence Module 3: Key Coaching Skills for Leaders Active listening: asking the right questions, listening beyond the words Giving and receiving feedback: providing constructive feedback to motivate and improve performance Building rapport and trust with team members Coaching for growth: helping individuals unlock their potential and build confidence Challenging and supporting: knowing when to push for growth and when to provide support Module 4: Setting Clear, Achievable Goals The importance of goal-setting in coaching for high-performance Setting SMART goals (Specific, Measurable, Achievable, Relevant, Time-bound) Aligning team goals with organisational objectives and strategy Techniques for holding team members accountable to their goals Creating a culture of continuous feedback and improvement Module 5: Motivating and Inspiring Teams The psychology of motivation: intrinsic vs extrinsic motivation Leveraging strengths: identifying and utilising team members’ core strengths for high impact Building team ownership: fostering a sense of responsibility and autonomy Using recognition and reward systems to motivate performance Building resilience: coaching through setbacks and challenges Module 6: Coaching for Performance and Development Balancing short-term performance goals with long-term development needs Identifying potential and growth opportunities in your team Conducting effective one-on-one coaching sessions: structure and frameworks Using assessments and data to drive coaching decisions (e.g., 360-degree feedback, performance metrics) Encouraging self-reflection and self-coaching in team members Module 7: Leading through Change and Uncertainty Coaching leaders to navigate change: resilience in times of uncertainty The role of leadership in creating clarity and stability during change Helping teams embrace change and uncertainty with a growth mindset Leading with emotional intelligence during periods of transition Module 8: Action Planning for High-Impact Leadership Coaching Reflecting on your coaching style and leadership strengths Developing an action plan for coaching individual team members and leading high-performing teams Defining key coaching strategies and techniques for ongoing leadership development Creating a culture of feedback and continuous growth within your team Setting up regular check-ins and performance reviews to monitor progress Delivery Style Highly interactive with coaching demonstrations, role-playing, and peer-to-peer coaching exercises Real-world case studies and leadership scenarios to apply key concepts Practical tools, templates, and frameworks for implementing coaching in the workplace Personal action planning for leadership development and team performance Group discussions and reflection activities Course Materials Provided Leadership Coaching Framework and Templates SMART Goals Worksheet and Coaching Conversation Guide Feedback and Accountability Tools Leadership Development Action Plan Resource list: Books, podcasts, and articles on leadership coaching Optional Add-ons One-on-one leadership coaching sessions for personalised development Post-course check-ins and follow-up coaching to track progress Group coaching sessions for team leaders to share best practices and support one another Tailored modules focused on specific leadership challenges (e.g., change management, team dynamics)
Coaching Leaders for High-Impact Performance
By Elite Forums Events
Course Duration: Half-day or full-day program (with virtual delivery options) Target Audience: Mid-to-senior level leaders, executives, managers, HR professionals, and leadership development coaches looking to enhance their leadership capabilities and create high-performing teams. Course Objectives By the end of this course, participants will be able to: Understand the role of coaching in leadership development and high-impact performance. Learn effective coaching strategies to inspire and elevate team performance. Develop skills in active listening, providing feedback, and fostering accountability. Enhance their ability to set clear goals, motivate teams, and create a culture of continuous improvement. Build an action plan for coaching their teams towards high-impact performance. Course Outline Module 1: The Role of Leadership in High-Impact Performance What defines high-impact leadership and performance? The difference between managing and coaching: leadership approaches that drive results The impact of leadership on organisational culture, productivity, and morale Essential leadership competencies for driving high performance Module 2: The Coaching Mindset Understanding the coaching mindset: shifting from directive leadership to empowering leadership Coaching as a tool for leadership development and team performance The benefits of a growth mindset in leadership and performance Key attributes of an effective coach: empathy, active listening, emotional intelligence Module 3: Key Coaching Skills for Leaders Active listening: asking the right questions, listening beyond the words Giving and receiving feedback: providing constructive feedback to motivate and improve performance Building rapport and trust with team members Coaching for growth: helping individuals unlock their potential and build confidence Challenging and supporting: knowing when to push for growth and when to provide support Module 4: Setting Clear, Achievable Goals The importance of goal-setting in coaching for high-performance Setting SMART goals (Specific, Measurable, Achievable, Relevant, Time-bound) Aligning team goals with organisational objectives and strategy Techniques for holding team members accountable to their goals Creating a culture of continuous feedback and improvement Module 5: Motivating and Inspiring Teams The psychology of motivation: intrinsic vs extrinsic motivation Leveraging strengths: identifying and utilising team members’ core strengths for high impact Building team ownership: fostering a sense of responsibility and autonomy Using recognition and reward systems to motivate performance Building resilience: coaching through setbacks and challenges Module 6: Coaching for Performance and Development Balancing short-term performance goals with long-term development needs Identifying potential and growth opportunities in your team Conducting effective one-on-one coaching sessions: structure and frameworks Using assessments and data to drive coaching decisions (e.g., 360-degree feedback, performance metrics) Encouraging self-reflection and self-coaching in team members Module 7: Leading through Change and Uncertainty Coaching leaders to navigate change: resilience in times of uncertainty The role of leadership in creating clarity and stability during change Helping teams embrace change and uncertainty with a growth mindset Leading with emotional intelligence during periods of transition Module 8: Action Planning for High-Impact Leadership Coaching Reflecting on your coaching style and leadership strengths Developing an action plan for coaching individual team members and leading high-performing teams Defining key coaching strategies and techniques for ongoing leadership development Creating a culture of feedback and continuous growth within your team Setting up regular check-ins and performance reviews to monitor progress Delivery Style Highly interactive with coaching demonstrations, role-playing, and peer-to-peer coaching exercises Real-world case studies and leadership scenarios to apply key concepts Practical tools, templates, and frameworks for implementing coaching in the workplace Personal action planning for leadership development and team performance Group discussions and reflection activities Course Materials Provided Leadership Coaching Framework and Templates SMART Goals Worksheet and Coaching Conversation Guide Feedback and Accountability Tools Leadership Development Action Plan Resource list: Books, podcasts, and articles on leadership coaching Optional Add-ons One-on-one leadership coaching sessions for personalised development Post-course check-ins and follow-up coaching to track progress Group coaching sessions for team leaders to share best practices and support one another Tailored modules focused on specific leadership challenges (e.g., change management, team dynamics)
Online Options
Show all 23131AM2/AM2E/AM2S Assessment
By Technique Learning Solutions
What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.
Site Management Safety Training Scheme (SMSTS) 5 day course
By SMC Safety Solutions
This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.
Site Supervisor Training Scheme (SSSTS) - 2 Day Course
By SMC Safety Solutions
This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively. It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes. Course Content • Health and safety law and how it will apply to supervisors. • Your supervisory responsibilities in controlling site safety. • Risk assessments and the need for method statements. • Effective site inductions, toolbox talks and method statement briefings. • Monitoring site activities effectively. • Timely intervention when bad practice is identified. Prerequisites This course is for you if you are considering, or already have, supervisory responsibilities. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox
Site Management Safety Training Scheme (SMSTS) Refresher
By SMC Safety Solutions
Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago. Aims Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards. Instructions For online courses labeled “Remote Learning,” a tutor will deliver the training via video call. All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program. Additional attendee information will be provided via email. Please ensure you check your inbox.
C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations
By Technique Learning Solutions
City & Guilds 2391-52 Combined Course: Course Description The new Testing and Inspection City & Guilds 2391-52 Combined Course qualification replaces and is improved on the former 2394/2395 that was previously available to electricians but has since been withdrawn. City & Guilds 2391-52 course runs over five consecutive days, the first three days covering fundamental theory. The fourth day covering Initial Verification practical and revision. The fifth day of the City & Guilds 2391-52 course covering Periodic Inspection practical and revision with an open book 2 hours Multiple choice exam. A 5 day City & Guilds 2391-52 course for a student possessing knowledge of the wiring regulations and with minimal knowledge of inspection and testing, We strongly recommend City and Guilds 2382 is achieved prior to sitting this course, though this is NOT an entry requirement. In order to claim the full City & Guilds 2391-52 qualification, students must successfully complete the following: Completed during the course each student will sit a 2 hours online Multiple choice exam (open book) Then will have to reattend and complete a Practical Assessment which is 4hrs. Assessment – 2391-52 Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs and 30mins Task C – Short Answer Questions – 1hr and 20mins To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City & Guilds 2391-52 course costs include examination entry fees. The Tutors: Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment. On-site Available Group Rate: (up to 8 people): £895.00 + VAT Per Day* plus £50.00 + VAT Exam Entry Fee per Student *(over 8 people, please call on 0800 112 3310 to discuss Group Rate) This course replaces City & Guilds 2394/2395 combined – Level 3. Essential Book supplied *throughout* course!First exam fee included!
C&G 2391-50, Initial Verification of Electrical Installations
By Technique Learning Solutions
The City and Guilds 2391-50 electrical course has been designed to meet the needs of the electrical installation industry, and is aimed at practising electricians who have not carried out inspection and testing since qualifying or who require some update of training before going on to other City and Guilds qualifications. Candidates who achieve the City and Guilds 2391-50 qualification could progress on to the City and Guilds 2391-51: the Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. The City and Guilds 2391-50 course will focus on the teaching and learning of initial verification and certification of electrical installations. In order to claim the full City and Guilds 2391-50 qualification, students must successfully complete: One 1 hour 30 minute online multiple choice test to be completed during the courseOne 3 hour 30 minute practical test to be completed after the course, broken into two sections as follows:Task A – Initial Verification and Certification of the Complete Installation – 2hrs and 30minsTask B – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-50 course costs include examination entry fees.
C&G 2391-51, Periodic Inspection and Testing of Electrical Installations
By Technique Learning Solutions
City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.
This workshop offers new assessors skills and strategies to conduct effective professional discussions with learners. These discussions are not only essential for accurate assessment but also contribute to a more engaging and enriching learning experience for the students. This 2.5 hour workshop is aimed at those new to assessment, or who want to improve their skills in having professional discussions with their learners. This workshop will enable you to: Know when to use professional discussions with learners Plan for professional discussions with learners Prepare learners for taking part in professional discussions Use appropriate questioning techniques to use in professional discussions Record and reference professional discussions
