Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

47 Educators providing Courses in Birmingham

EquipmentBirmingham
West Coventry Academy

west coventry academy

Coventry

In practice, this means that we expect students, staff, parents and governors to model these core values. Student Expectations Respectful Students show respect for themselves, their peers, staff and the community. Communicate with others in a calm and respectful manner Listen and respect other people’s views Have respect for the school site and learning environment Have a healthy, active and proactive lifestyle, with self-respect and self-discipline Recognition that respect for effort brings reward Responsible Students are responsible for their own behaviour and their consequences. Students are responsible for their own learning Students are responsible for wearing the correct uniform, bringing the correct books and equipment to school. Students are responsible to complete their work (including homework) Students are responsible to attend/complete any sanctions issued due to inappropriate behaviour or missed work. Students are responsible to report any inappropriate behaviour to an appropriate adult Resilient Students become more resilient when they realise that it is important to make mistakes and learn from them When finding work difficult, students should not just give up Re-read the work, look at previous work, have another go! Only ask for help when the above has been done Have high expectations of yourself Learn from experiences, in order to become stronger and better at tackling the next challenge Ready to Learn Students attend school in correct uniform, on time and with the correct equipment books Be punctual for all lessons, enter rooms calmly, take out equipment and start the Do Now in silence Make sure all home and prior learning tasks have been completed Have the right attitude to learn and actively engage in lessons Staff Expectations Respectful Staff model respectful behaviour to promote a culture of mutual respect Communicate with others in a calm and respectful manner Feedback on work respectfully, showing students that their work and effort has been valued. Show respect through being fair and consistent when dealing with students Promote that respect for effort brings reward Responsible Staff are responsible for creating a positive and calm learning environment Teachers are responsible for delivering well planned and meaningful learning experiences Teachers understand the responsibility of their role as a tutor Staff understand the responsibility of working in a school Staff are responsible for modelling expectations Staff are responsible for challenging poor behaviour and uphold school policies consistently. Resilient Support the whole school community to build resilience Identify vulnerable students that may have barriers to learning, support them in reducing barriers and equip them with the skills to build their resilience Praise student’s efforts Teach students that we learn from make mistakes Be open and flexible to new initiatives Develop a Growth Mindset Ready to Learn Ensure lessons are well planned and have impact for all students Ensure you are punctual to lessons and greet the students in a positive way Ensure school rules are applied consistently and fairly Listen to student concerns and help students overcome barriers to learning Empower students to become independent learners Parent Expectations Respectful Promote respectful behaviour within their families Communicate with the school in a calm and respectful manner Respect that all school decisions they are made with best interests of the students Respect the school rules and explain to their child the importance of them Respect the importance of education and teach their child the value of it Promote that respect for effort brings reward Responsible Parents are responsible for their child’s attendance and behaviour Parents are responsible to ensure their child is kept safe and well. Parents are responsible to ensure their child has the correct uniform and equipment. Parents are responsible for communicating with the school to flag any issues that may affect their child’s learning. Parents are responsible challenge poor behaviour and celebrate success Resilient Build up their child’s resilience through supporting them emotionally and helping them to show determination in the face of adversity Promote the importance of “Learning from mistakes” Demonstrate a positive attitude about education and their child Praise their child’s efforts and not just their academic achievements Ready to Learn Ensure their child attends school on time, in the correct uniform and with the right books/equipment Support their child with their learning Develop a partnership with the school Keep track of their child’s homework and behaviour by accessing classcharts regularly Encourage their child to read and to become an independent learner

Message
Bonita Candles Ltd

bonita candles ltd

Wolverhampton

We offer candle making workshops aimed for the absolute beginner and anyone who is interested in learning a new skill.  Whether it be for a new hobby, to inspire a business opportunity or simply just a great way of spending a few hours learning a new craft, you will leave us feeling proud of your achievements. With the emphasis on fun and flair you'll learn to create attractive scented candles with a variety of waxes, oils and dyes and using some creative techniques.  Everything you make on the day is yours to take home and enjoy.  You don't need to bring anything with you as we provide all of your equipment and ingredients. What you get: * An opportunity to make unique, scented candle creations. *  An understanding of a variety of waxes and their different uses * Learn how to correctly measure and mix the wax ingredients. * Learn how to add dyes and fragrances. * You’ll make scented goodies of which you’ll take home to enjoy. * Handouts of the ingredients methods and tips so you can make candles at home. * We’ll have great fun! What’s included: * All tools, equipment and ingredients * Apron * Complimentary light refreshments will be provided. We also conduct candle making parties for adults and children and corporate team building session. If you would like to know more about our workshops, please contact us for more information.

Message
Orion Training & Development

orion training & development

Birmingham

The Motor Vehicle Maintenance Level 1 is ideal for students who want to try working with cars to see if they enjoy it. Training takes place at our Motor Vehicle Training Centre including Employability and Functional Skills. The vocational course consists of 50% practical work on live, working cars within the purpose-built Training Centre and 50% theory based work. Assessment is carried out via e-portfolio. COURSE CONTENT This qualification covers all aspects involved with maintenance and repair of cars including: • Health and Safety • Tools, equipment and materials • Spark Ignition Systems (Petrol) and Compression Ignition Systems (Diesel) • Engine Cooling and Lubrication • Steering and Suspension • Wheels and Tyres • Fuel, Ignition, Air and Exhaust Systems • Removing and Replacing Engine Units and Components • Braking Systems • Driveline Maintenance • Employability Skills Students can also complete Functional Skills in Math’s, English and ICT at varying levels depending on ability level. Students can be expected to be challenged to achieve as high a qualification as they can.

Tumble Tots Marlow-Maidenhead-Slough

tumble tots marlow-maidenhead-slough

Worcestershire,

Tumble Tots is a physical play programme. We offer classes where children can develop their physical skills of balance, agility, climbing and co-ordination, whilst at the same time stimulating their imagination, and developing their language and social skills. Our sessions are structured around the different ages and stages of a child's development, from 6 months to school age. Each week we combine fun, excitement and challenge in a safe and caring environment, with our unique equipment and team of specially trained coaches. Children have an enormous amount of natural energy and with proper help and guidance it can be channelled in the right direction. We believe that if we can start children on a healthy way of life early on then it will become a habit for the rest of their lives. Exercise should be about having fun and that’s exactly what Tumble Tots provides! My name is Helen Otto and I live in High Wycombe with my husband, twin 8-year-old daughters and our 4 year old son. I took over running Tumble Tots in Marlow, Maidenhead and Bourne End in June 2017. The girls had been going to Tumble Tots in Marlow for a couple of years and loved the classes. I’d been a Tumble Tot as a child, and had also been a competitive swimmer right up until my late teenage years, so doing something in sport really appealed to me. And I love working with kids. Seeing children grow in confidence and ability week after week is so rewarding. I'm lucky enough to be surrounded by a fab team of coaches who work their socks off to make our classes fun and challenging for our tots. Our Class Leaders are Jade, Jackie, Katie and myself. And our Coaches are Sarah, Lisa and Liz.

Message
Health Futures Utc

health futures utc

Wolverhampton

Our vision is to provide a broad, inclusive health and science curriculum, delivered to the highest standards in partnership with our employer partners. This will ensure that our learners receive personalised, practical experiences, offering opportunities that enrich their experience above and beyond that normally expected and enhancing their employability WE OFFER TOMORROW’S EDUCATION TODAY We’re excited and proud to be the first UTC in the UK to specialise in health care and health science, offering learning and career opportunities for young people like no other school or college in the region. By combining academic study with real-life work projects, personal development activities, and career opportunities our young people will become well-rounded work-ready individuals. They will benefit from a combination of qualified national curriculum teaching and putting their learning into practice in exciting, work-focused projects that are delivered in partnership with employer professionals. We’re able to deliver this ‘tomorrow’s education today’ concept through robust partnerships with major health, education and public sector organisations. This approach supports the development of academic, practical and life skills in our young people, equipping them to meet the demands from employers for good qualifications, transferable skills and a professional attitude to work – whatever career path they eventually choose. We believe that the UTC can provide a set of opportunities and qualifications that will provide an excellent foundation for students to enter the health and care professions. WHAT IS A UTC? University Technical Colleges (UTCs) are government-funded schools with a science, technology, engineering and maths (STEM) focus. They provide a unique and relevant approach to education, which addresses the changing needs of students and employers in the 21st century. UTCs were established by companies and universities in areas of high demand for talent. Alongside national curriculum teaching, UTCs also offer sought-after vocational and technical qualifications, and benefit from industry-standard equipment and specialist staff to provide students with skills that are valued by employers. The UTC curriculum has a strong emphasis on ‘real life’ project-based learning, which engages students and develops their personal character. Because of this unique offer, UTCs allow for a broad choice of pathways when a student reaches 18 years old: university, higher or degree apprenticeships, or directly into a career.

Message
Ncati

ncati

Birmingham

We are dedicated to creating the skilled engineering workforce of tomorrow. Operating from our campuses in Doncaster and Birmingham, NCATI is part of the University of Birmingham Group, and is led by a team with strong links with both industry and education. This ensures that the skills we teach are ones that employers in the transport and infrastructure sectors need. To deliver the major infrastructure programmes and rail modernisation initiatives planned across the UK, the engineering workforce needs a greater number of talented people, with a different blend of skills, and from more diverse backgrounds. Our mission as an organisation is to produce a new generation of highly skilled professionals from a range of communities, changing what the rail industry looks like with new segments of the UK joining Britain’s rail, transport, and infrastructure workforce. Accessible from levels 3 to 6, our curriculum offer is for ages 16 and above, and includes part-time and full-time courses, as well as apprenticeships. One of our values at the college is pioneering excellence, and we strive to achieve this by utilising the best technology and facilities available – with over £9 million of specialist kit and equipment donated to us by our employer partners. Industry collaboration is integral to our success, and NCATI has benefitted significantly from engaging with leading sector employers like HS2, Honeywell, and Alstom. Our network supports us by offering apprenticeships, work placements, mentoring and site visits. We also have guest lecturers that come into the college and teach learners about the latest innovations in the industry. Our learners are at the heart of everything we do. That is why we have created a supportive learning environment with smaller class sizes and personalised one-to-one mentoring, allowing every individual to thrive and achieve their personal and professional goals.

Message
Tumble Tots Nottingham

tumble tots nottingham

Worcestershire,

Tumble Tots is Nottingham's premium children's physical activity programme, from Walking (around 1 year old) to school age (4 years). Designed to develop children’s physical skills of agility, balance, co-ordination and climbing, through the use of brightly coloured Tumble Tots equipment, especially designed for little people. According to the physical activity guidelines issued by the four Chief Medical Officers (CMOs) of England, Scotland, Wales and Northern Ireland regular physical activity in children and young people is associated with improved learning and attainment, better mental health and cardiovascular fitness, also contributing to healthy weight status. Toddlers and preschoolers should spend at least 180 minutes (3 hours) per day in a variety of physical activities. The Tumble Tots programme has been carefully designed to promote physical activity, sport and exercise in children for physical and mental health benefits. We currently run the following "age and stage" classes in Nottingham: ★ Walking to 2 years ★ 2 to 3 years ★ 3 years to school age To learn more about our programme and each of our "age and stage" development classes click on "About > Our Programme". You can also click here to watch a short YouTube video about our programme. Our centres in Nottingham: MONDAYS Gamston Community Hall (Gamston) - NG2 6PS TUESDAYS David Ross Sports Village (University of Nottingham) – NG7 2RJ WEDNESDAYS David Ross Sports Village (University of Nottingham) – NG7 2RJ THURSDAYS Grange Hall (Radcliffe On Trent) - NG12 2FB FRIDAYS Sir Julien Cahn Pavilion (West Bridgford) - NG2 7JE Pricing and term information There are three elements to booking regular classes with Tumble Tots Nottingham 1) Annual Membership 2) Regular monthly class fees 3) Class fees covering payment: 1) Annual Membership The first element requires your child to become a member of the Tumble Tots National Club to participate in classes. Your membership is paid at the same time as confirming your regular booking, so that we can set-up your child's personal accident insurance policy to cover your LO to attend classes straight away. The annual membership fee is £26 per child. In addition, your child will receive a welcome pack posted directly to them including their iconic Tumble Tots T-Shirt, Back Pack, Sticker Book, Membership Card and Handbook. We also offer a reduced rate for Renewals and members can take advantage of our exclusive offers, discounts, competitions and many more member benefits! Please encourage your LO to wear their t-shirt to help them feel a sense of unity and pride with their fellow Tumble Tots, as well as the practical aspect of wearing comfortable loose clothing for climbing!! NB - our annual membership is mandatory, non-transferable, non-refundable and valid for one year. To view the full details of our membership programme please visit: https://www.tumbletots.com/nottingham/membership You can also checkout the toys and gifts that we sell in our online shop by visiting: http://www.tumbletots.co.uk/ 2) Regular monthly class fees At the same time as confirming your booking, you will pre-enter your credit or debit card details to authorise us to take a recurring payment on the 1st of a month for your child's class fees. A recurring payment is similar to a direct debit but taken from a valid debit or credit card and not directly from your bank account. The monthly fee is £28 and will be automatically processed on the 1st of the month for classes in the same month, i.e. September class fees will be paid on 1st September. We operate classes during school term time only and your monthly subscription plan covers class fees for a full school calendar year (36 weeks per annum), which have then been divided into 11 convenient and affordable recurring monthly payments. Your subscription will be paused in August, when no classes are running, or during periods of national lockdown. You may cancel your child's classes at anytime, giving a minimum 4 weeks notice. Younger siblings receive a 20% discount off their class fees. On average, there are 2-4 classes per month, dependent on how school term dates fall. 3) Class fees covering payment Please note that if you join part way through a month, a covering payment will be added to your first monthly instalment, so that you can start classes straight away. This amount will be calculated based on how many remaining classes there are. An example payment schedule is given below, where the new member joined on 21st September: Date of joining - £26 Annual Membership fee 1 Oct - £45 (£28 monthly fee October classes + £17 covering payment for 2 classes attended in September) 1 Nov - £28 monthly fee November classes 1 Dec - £28 monthly fee December classes (1 Jan - 1 Jul) - £28 monthly fee 1 Aug - £0 payment paused 1 Sep - £28 monthly fee September classes 1 Oct - £28 monthly fee October classes …and so on and so forth. Siblings discount Younger siblings receive a 20% discount off their class fees. Notice period You may cancel your child's place anytime, giving 4 weeks notice. Holidays, sickness and anytime / anywhere make-up classes We are unable to refund or credit missed classes, but do offer an anytime, anywhere makeup scheme. Term time only Classes do not operate during school holidays and dates will be indicated on our Facebook and Instagram pages, on our noticeboard and website, plus we also send end and beginning of term emails. Can younger siblings come along to their brother or sister’s class? Younger siblings in a car seat, pushchair or baby carrier are welcome to attend their older siblings class, so that your hands are free to support your child at all times. Cancellation • We reserve the right to cancel or postpone classes at any stage in the event of equipment failure, theft, insufficient participants or trainers, business closure or otherwise. • Any class fees refunds will be at the discretion of Tumble Tots Nottingham. The annual membership fee is non-refundable in full or in part. • Should a member, through illness or otherwise, miss their class, Tumble Tots Nottingham are under no obligation to offer a refund. Members are offered to make up the class on an alternative day. • Tumble Tots Nottingham reserves the right to vary course details in line with current guidance and best practise and to amend dates and prices without prior notice. Health & safety Your child’s safety is of utmost importance to us and we offer complete peace of mind and confidence that our programme is of the highest quality as a Fully Accredited Member of the Children’s Activity Association (CAA). 4 trained team members run our classes. All staff are responsible for maintaining safety and guiding both you and your Tumble Tot throughout the class. We operate on a strict 6:1 child/adult ratio, similar to nursery and preschool groups. Our team are DBS checked. There is a paediatric first aider and fire warden on site at all times. Parents are actively involved in the sessions for under 3’s. In the 3+ sessions, Tumble Tots participate without their grown up. By taking part you agree and acknowledge: • That it is an indoor activity with an element of risk. Members should be prepared to be knocked or bruised whilst learning new skills. In booking this activity, the participant acknowledges that it may be physically and emotionally challenging and that there are inherent risks associated with this activity. • At all times, to comply with the instructions given by staff members, particularly regarding supporting techniques and wearing suitable clothing for the activity. Misconduct You understand that Tumble Tots Nottingham may exclude anyone from a particular session and ask anyone who refuses to comply with these course booking terms or who conducts themselves in any way or who causes damage or annoyance to other persons to leave. Covid-Secure During the Covid-19 pandemic we have implemented additional health and safety measures, that can be read via the link below, to protect our members, team and the wider Nottinghamshire community. We entrust our members to adhere to the measures that we and the UK Government have put in place, to prevent any transmission whilst attending classes, and keep classes running. COVID-19 Secure Measures Complaints Should you have a complaint or issue you wish to raise, please let Fiona know, or another member of staff who you feel comfortable raising the issue with.

Message
1...345

Courses matching "Equipment"

Show all 256

Introduction to Phlebotomy Course (GPT003) - 2 Day Classroom

4.6(39)

By Geopace Training

Learn how to take blood ... train as a Phlebotomist Nationally Recognised Qualification No previous experience or qualifications needed OCN Accredited - Level 3 (advanced) CPD Accredited (The CPD Certification Service) Covers all steps up to live blood draw Practise on artificial arm and fake blood! Basic understanding of English language required OPEN TO ALL APPLICANTS

Introduction to Phlebotomy Course (GPT003) - 2 Day Classroom
Delivered In-Person in Yorkshire + 17 more + more
£285

Phlebotomy Training - Beginner to Advanced PACKAGE

4.6(39)

By Geopace Training

THIS COURSE PACKAGE INCLUDES: 1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5) 2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6) 3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom) Learn how to take blood ... train as a Phlebotomist FAST-TRACK YOUR PHLEBOTOMY TRAINING WITH OUR COMPLETE TRAINING PACKAGE 20% off - Multi-Course Discount Cover all stages from beginner through to Level 4 Available as Classroom or Virtual Classroom Complete your beginner to advanced training in 2 days Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications Both courses are dually accredited (OCN & CPD) Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom Covers all steps up to live blood draw Learn advanced skills and techniques Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep) Basic understanding of English language required OPEN TO ALL APPLICANTS

Phlebotomy Training - Beginner to Advanced PACKAGE
Delivered in Rotherham + 19 more or Online + more
£495

Advanced Phlebotomy - Skills & Techniques (GPT005)

4.6(39)

By Geopace Training

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6) FDSc (Foundation Degree Level) qualification Nationally Recognised certificate Dually accredited: Open College Network and CPD Covers both aspirated and evacuated systems Covers specialised blood collection systems & methods Classroom or Virtual Classroom learning options Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep) Complete your training from beginner to advanced level This course either follows on from our Introduction to Phlebotomy Course or can be combined with our introductory course as part of a course package (see below) Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.

Advanced Phlebotomy - Skills & Techniques (GPT005)
Delivered in Rotherham + 20 more or Online + more
£195

Cannulation Training – CPD Approved

By Lead Academy

Do you want to boost your medical career by learning about the cannulation process? This comprehensive cannulation course is ideal for you!  You can learn about the whole venepuncture and cannulation procedure in this Venepuncture and Cannulation Training Course, as well as the safest methods for handling, flushing, and removing a cannula. This course will provide you with the necessary training to flourish in your profession, whether you are a novice or an experienced individual wishing to enhance your career in the healthcare industry.  Course Highlights Designed by healthcare professionals Accredited by the CPD Certification Recognised and Valuable Certification Self-Paced Online Theoretical Learning High-Quality Study Materials Interactive practical training Practical Day Class Schedule – 1 Day Face-to-Face Training  Venue Location London: Bank Studio, 23 Park Royal Road, NW10 7JH Date: 2nd August, 2024 Date: 25th August, 2024 Date: 29th September, 2024 Date: 29th October, 2024 Date: 29th November, 2024 Time: 10:00 am – 05:00 pm Venue Location Birmingham:  44 Blucher Street, Birmingham, B1 1QJ Date: 21st August, 2024 Date: 24th October, 2024 Date: 12th December, 2024 Time: 10:00 am – 05:00 pm This extensive IV Cannulation Course covers the following credentials:  Selection of veins for cannulation Arm and hand physiology and anatomy Types of cannula Process of cannulation Safety measures Proper insertion of the cannula Classroom-Based Cannulation Course Practical learning We offer comprehensive theoretical study materials and practical sessions for our cannulation training. As part of the practical training, you will receive practical dry lab demonstrations and hands-on experience to justify your role.  Who is this Venepuncture and Cannulation Course for?  This Venepuncture and Cannulation course is primarily aimed at:  Health Visitors Healthcare professionals Nurses, midwives, pharmacists and doctors Freshers looking to begin their career in the healthcare sector Anyone looking to enhance their cannulation skills Aims and Learning Outcomes of this Venepuncture and Cannulation Training Course  Know how to select the appropriate veins for cannulation Understand the anatomy and physiology of hands and arms Recognise the various sizes of a cannula Identify the risks concerning cannulation Know how to insert the cannula properly Recognise the safety precautions that should be maintained Gain knowledge about the dressing procedure Know how to safely flush and remove a cannula Learn how to securely dispose of all the sharps Learning how to perform Phlebotomy Trainingand Catheterisation Training can help you to provide better care to your patients. By being able to insert a catheter quickly and effectively, you can administer necessary treatments more efficiently, which can improve patient outcomes and reduce discomfort. Entry Requirements There are no academic entry requirements for this cannulation course, and it is open to students of all educational backgrounds. You need to join the Phlebotomy Training before attending the Cannulation Training. Assessment Method In this Venepuncture and Cannulation training, learners will be assessed via observation. That means during the practical training, you will be observed by the supervisor/trainer. Upon successful demonstration of blood sampling and blood draw, you will be awarded a CPD-accredited certificate accepted by thousands of professional bodies and government regulators in the UK and worldwide. Whether you are a fresher looking to kickstart your career in healthcare or practising healthcare looking to enhance your cannulation skills, this course will help you achieve your professional aspirations by all means. Course Curriculum 1. Cannulation Training - Course Introduction 2. What are Venepuncture and Cannulation 3. Anatomy and Physiology of the Circulatory System 4. Legal Aspects of Venepuncture (Phlebotomy) and Cannulation 5. Practitioner Requirements 6. Professional Competence and Accountability 7. Documentation and Record Keeping 8. Vicarious Liability 9. Consent 10. Influencing Factors during Venepuncture 11. Infection Prevention and Management 12. Haemolysis 13. Selecting Correct Equipment 14. Procedure of Venepuncture and Cannulation 15. Order of Draw 16. Peripheral Cannula and Venepuncture 17. Procedure Prior to Cannulation 18. During Cannulation 19. Cannula Size and Cannulation Aftercare 20. Removal of Cannulation 21. Complications 22. Cannulation Training - Conclusion Recognised Accreditation This course is accredited by Continuing Professional Development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Certificate of Achievement On successful completion of the cannulation course, you will be eligible to obtain a CPD-accredited certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy. 

Cannulation Training – CPD Approved
Delivered In-Person in London + 1 more + more
£160

Vaccination / Injection Course (GPT601)

4.6(39)

By Geopace Training

Learn how to administer vaccines or injections ... Nationally Recognised Qualification Includes IM, ID and Sub-Cut Injection methods OCN Accredited - Level 4 (Foundation Degree - FDSc) Covers all steps to safely perform a vaccination Use same techniques and skills for aesthetic therapies Includes B12, Vitamin C and other treatments Essential qualification for all injections Basic understanding of English language required OPEN TO ALL APPLICANTS

Vaccination / Injection Course (GPT601)
Delivered in Milton Keynes + 2 more or Online + more
£195

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

About this training course This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports. Training Objectives Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment Commissioning Procedures, Documents, and Certification of Electrical Equipment: Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report Commissioning Procedures for Transformers: Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records. Commissioning Procedures for Switchgear Assemblies: Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms Commissioning Procedures for Generator and Auxiliaries: Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator Commissioning Procedures and Instructions for Generator Electrical Equipment: Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors Code Requirements for Commissioning Electrical Equipment and Systems: Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Commissioning of Electrical Equipment
Delivered in Internationally or OnlineFlexible Dates
£3,009 to £3,499

ProQual NVQ Level 3 Diploma - Testing, Inspecting and Thorough Examination of Plant, Machinery, Equipment or Accessories

By Learning for Hire Limited

ProQual NVQ Level 3 Diploma - Testing, Inspecting and Thorough Examination of Plant, Machinery, Equipment or Accessories - on-site assessment - we come to you

ProQual NVQ Level 3 Diploma - Testing, Inspecting and Thorough Examination of Plant, Machinery, Equipment or Accessories
Delivered In-Person in Oswestry or UK WideFlexible Dates
£1,200

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods. The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment. The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance. Training Objectives Electrical Equipment Testing and Maintenance: Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Inspection and Diagnostics: Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Troubleshooting: Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Online Condition Monitoring: Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Repair and Refurbishment: Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Rotating Equipment Vibration Analysis and Balancing Methods: Learn about vibration analysis and balancing methods of motors and generators. Electrical Equipment Codes and Standards: Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Equipment Causes and Modes of Failure: Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Generator Upgrades and Rewinds: Learn the various methods used to upgrade and rewind a generator Protective Systems: Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals (this course is suitable for individuals who do not have an electrical background) Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment
Delivered in Internationally or OnlineFlexible Dates
£3,009 to £3,499

FORS Safe Urban Driving - Periodic 7 Hour CPC Course -Birmingham

By Total Compliance

#SafeUrbanDriving #Birmingham #driver #driver_safety #driver_training #fors #nottingham #sud

FORS Safe Urban Driving - Periodic 7 Hour CPC Course -Birmingham
Delivered In-Person in Birmingham + more
£122.75

Coiled Tubing Operations - Equipment, Applications, Well Control, Safety & Emerging Technologies

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course On a day-to-day basis, one of the most common technologies utilised in well intervention is Coiled Tubing. This is prevalent in the oil industry and the technology is used during drilling, completion and production phases of Oil & Gas wells worldwide. This 5 full-day course will look at the following areas: Equipment for surface and pressure control Assembly components for bottom-hole Details of the different types of interventions performed with Coiled Tubing, and How to deal with fatigue and corrosion. The aim of this course is to enable the participants to gain key knowledge that they will require to actively and efficiently participate in the planning, design, and / or execution of a Coiled Tubing intervention. With this, the participants will learn how to calculate the string operating limits and the volumes and rates during nitrogen interventions. The course will walk the participants through the emergency responses and contingencies to deal with in various scenarios. Time will be allocated for the participants to work on the practical exercises as well as real field cases and problems. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives By the end of the course, the participants will be able to: Plan, design, manage and execute interventions for Coiled Tubing Enhance operational performance during interventions for Coiled Tubing Explain the recommended equipment for various Coiled Tubing field conditions and applications Discuss the proper pressure control equipment for any particular well condition Learn about the most commonly used downhole tools and explain their function Understand how to calculate and define string limits for Coiled Tubing Learn how to work safely with liquid nitrogen Target Audience This course is aimed at Drilling and completion engineers Production engineers Surface/subsurface engineers Operations engineers Service company managers Field engineers This course will also benefit professionals who would like to increase their knowledge in the planning, design and/or execution of Coiled Tubing and Liquid Nitrogen interventions. Course Level Basic or Foundation Training Methods Other than the daily quizzes to reinforce the materials presented in the session, the participants will work through exercises such as: Selecting suitable BHAs for various operations Rigging up equipment in the correct order and preparing an outline testing programme Carrying out suitable calculations to perform an N2 lift Preparing an outline programme for a balanced cement plug Identifying issues in various videos & photos and suggesting mitigations Basic N2 safety quiz Final exercise will be preparing an outline programme for a Proppant Clean out, including a detailed Risk Register and Mitigation options Trainer Your expert course instructor has over 40 years of experience in the Oil & Gas industry. During that time, he has worked exclusively in well intervention and completions. After a number of years working for intervention service companies (completions, slickline & workovers), he joined Shell as a well service supervisor. He was responsible for the day-to-day supervision of all well intervention work on Shell's Persian/Arabian Gulf platforms. This included completion running, coil tubing, e-line, slickline, hydraulic workovers, well testing and stimulation operations. An office-based role as a senior well engineer followed. He was responsible for planning, programming and organising of all the well engineering and intervention work on a number of fields in the Middle East. He had a brief spell as a Site Representative for Santos in Australia before joining Petro-Canada as Completions Superintendent in Syria, then moved to Australia as Completions Operations Superintendent for Santos, before returning to Shell as Field Supervisor Completions and Well Interventions in Iraq where he carried out the first ever formal abandonment of a well in the Majnoon Field. While working on rotation, he regularly taught Completion Practices, Well Intervention, Well Integrity and Reporting & Planning courses all over the world. In 2014, he started to focus 100% on training and became the Technical Director for PetroEDGE. Since commencing delivering training courses in 2008, he has taught over 300 courses in 31 cities in 16 countries to in excess of 3,500 participants. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Coiled Tubing Operations - Equipment, Applications, Well Control, Safety & Emerging Technologies
Delivered in Internationally or OnlineFlexible Dates
£3,095 to £3,599
Show all 256

Search By Location