- Professional Development
- Medicine & Nursing
- Arts & Crafts
- Health & Wellbeing
- Personal Development
LG's Therma V air-to-water heat pump product training course now available from Unitherm. On completion of the one day Therma V training course, you will gain access to LG's extended product warranty (7 years subject to the warranty terms and conditions) which is a parts and labour contribution warranty. What's covered: • The full LG Therma V range; medium temperature split and monobloc systems and the high temperature split system. • Product range and design, installation, commissioning and basic troubleshooting. • Suitable for Heating/Installation and Service Engineers only. • Refreshments and lunch will be supplied free of charge on the day. On completion of the course, you will gain access to LG's extended product warranty. (Subject to LG's warranty terms and conditions). For the extended warranty you will need to attend the training, install to LG's requirements & supply LG with the following; • LG Commissioning Form. • Hydraulic and Wiring Schematic. • Photographs of the installation. • MCS Submittal documentation (if applicable). • LATS Therma V report (if applicable). All documents need to be with LG within 30 days of the system commissioning date.
Hydronics Unlocked — 1-Day Course Design and install smarter heating systems with confidence. This full-day course is crafted for heating professionals who want to sharpen their design skills, understand system performance and build the knowledge they need for modern, efficient installs — with boilers, heat pumps or both. 💡 Who This Course Is For Whether you're: An experienced engineer looking to stay ahead of the curve, Newly qualified and craving clear, practical answers Installing gas or oil boilers and exploring the move into heat pumps, Already fitting heat pumps but missing key insights, Or designing systems on paper and want to bridge the gap to real-world installs… This course will help you take your next step to levelling up your career. 🧠 What You’ll Learn Build the confidence and skills to deliver systems that are more efficient, reliable and ready for the future. You'll learn: Our 10-Step Hydronics Process: your complete framework for design and installation Pump Setting: understand how to match pump performance to system needs Flow, Velocity, Resistance: calculations made simple and useful Pipe Sizing: learn how to size pipes correctly to minimise pressure loss Controls for Efficiency: understand how modern controls improve performance Low temperature design: build confidence and skills for heat pump work 🎁 What's Included 📍 In-person training led by Scott Sanford 📖 Take-home course book ☕ Tea, coffee, and biscuits provided throughout 🥪 Lunch included ⭐ Scott Sanford Scott is a the technical training manager with SNIPEF, supporting heating engineers across Scotland to build confidence and competence in modern low-carbon systems. With a background in installation and a strong focus on heat pump technologies, Scott combines deep technical understanding with a practical, supportive teaching style. He’s particularly passionate about raising standards and building a strong installer network across Scotland. 🗺 Where Venues across Scotland - see listings
Hydronics Unlocked — 1-Day Course Design and install smarter heating systems with confidence. This full-day course is crafted for heating professionals who want to sharpen their design skills, understand system performance and build the knowledge they need for modern, efficient installs — with boilers, heat pumps or both. 💡 Who This Course Is For Whether you're: An experienced engineer looking to stay ahead of the curve, Newly qualified and craving clear, practical answers Installing gas or oil boilers and exploring the move into heat pumps, Already fitting heat pumps but missing key insights, Or designing systems on paper and want to bridge the gap to real-world installs… This course will help you take your next step to levelling up your career. 🧠 What You’ll Learn Build the confidence and skills to deliver systems that are more efficient, reliable and ready for the future. You'll learn: Our 10-Step Hydronics Process: your complete framework for design and installation Pump Setting: understand how to match pump performance to system needs Flow, Velocity, Resistance: calculations made simple and useful Pipe Sizing: learn how to size pipes correctly to minimise pressure loss Controls for Efficiency: understand how modern controls improve performance Low temperature design: build confidence and skills for heat pump work 🎁 What's Included 📍 In-person training led by Cliff Arnold 📖 Take-home course book ☕ Tea, coffee, and biscuits provided throughout 🥪 Lunch provided ⭐ Cliff Arnold Cliff heads up heat pump and HVAC system design at Bell Plumbing Supplies working with front line installers to deliver optimised, time saving designs. With decades of experience in heating system design, installation and commissioning, he brings a deep understanding of how systems perform in the real world. Cliff has worked across product development, installer training and technical support, giving him a rare ability to bridge first principles with practical delivery. He's passionate about helping heating engineers excel in their careers. 🗺 Where Renewable Energy Warehouse, Stourbridge, West Midlands DY9 7BQ Google Maps link
Hydronics Unlocked — 1-Day Course Design and install smarter heating systems with confidence. This full-day course is crafted for heating professionals who want to sharpen their design skills, understand system performance and build the knowledge they need for modern, efficient installs — with boilers, heat pumps or both. 💡 Who This Course Is For Whether you're: An experienced engineer looking to stay ahead of the curve, Newly qualified and craving clear, practical answers Installing gas or oil boilers and exploring the move into heat pumps, Already fitting heat pumps but missing key insights, Or designing systems on paper and want to bridge the gap to real-world installs… This course will help you take your next step to levelling up your career. 🧠 What You’ll Learn Build the confidence and skills to deliver systems that are more efficient, reliable and ready for the future. You'll learn: Our 10-Step Hydronics Process: your complete framework for design and installation Pump Setting: understand how to match pump performance to system needs Flow, Velocity, Resistance: calculations made simple and useful Pipe Sizing: learn how to size pipes correctly to minimise pressure loss Controls for Efficiency: understand how modern controls improve performance Low temperature design: build confidence and skills for heat pump work 🎁 What's Included 📍 In-person training led by Paul Leedham 📖 Take-home course book ☕ Tea, coffee, and biscuits provided throughout 🥪 Lunch provided ⭐ Paul Leedham Paul is an award-winning heat pump designer and one of the most respected voices in the low carbon heating space. A qualified electrician and heating engineer, he brings a rare depth of technical understanding, built on years of hands-on installation and high-end design work. He’s also actively involved in industry standards and policy discussions, keeping his training rooted in what’s coming next. 🗺 Where Matrix Energy Systems, Unit 5 Bradmarsh Way, Rotherham, Sheffield S60 1BW Google Maps link
Hydronics Unlocked — 1-Day Course Design and install smarter heating systems with confidence. This full-day course is crafted for heating professionals who want to sharpen their design skills, understand system performance and build the knowledge they need for modern, efficient installs — with boilers, heat pumps or both. 💡 Who This Course Is For Whether you're: An experienced engineer looking to stay ahead of the curve, Newly qualified and craving clear, practical answers Installing gas or oil boilers and exploring the move into heat pumps, Already fitting heat pumps but missing key insights, Or designing systems on paper and want to bridge the gap to real-world installs… This course will help you take your next step to levelling up your career. 🧠 What You’ll Learn Build the confidence and skills to deliver systems that are more efficient, reliable and ready for the future. You'll learn: Our 10-Step Hydronics Process: your complete framework for design and installation Pump Setting: understand how to match pump performance to system needs Flow, Velocity, Resistance: calculations made simple and useful Pipe Sizing: learn how to size pipes correctly to minimise pressure loss Controls for Efficiency: understand how modern controls improve performance Low temperature design: build confidence and skills for heat pump work 🎁 What's Included 📍 In-person training led by Dan Booker 📖 Take-home course book ☕ Tea, coffee and biscuits provided throughout 🥪 Lunch provided ⭐ Dan Booker Dan has over 20 years in electrical and renewable installations and now heads up H2-Eco’s design arm where he supports local installers in fitting high-performing heat pumps. He has delivered projects from small domestic upgrades to large commercial systems and trained installers nationwide in low temperature hydronics and heat pump technology. Dan is driven by a passion for solving complex technical challenges and advancing sustainable heating. 🗺 Where H2-Eco 3B, Glenmore Business Park, Holton Heath, Poole BH16 6NL Google Maps link
The Refrigeration Electrics 1 day course is aimed at anyone involved with refrigeration, air conditioning & heat pumps electrical control systems The course covers the three elements which are common to most refrigeration and air conditioning systems: protection, control, and motors. A typical refrigeration system will have protection provided by the fuse in the fused connection unit, further protection provided to the cable feeding the fused unit – probably by a circuit breaker, control provided by thermostat/time clock, etc, motor driven fans, pump & compressor. The aim of the course is to provide enough knowledge to allow maintenance and fault finding to be carried out safely and effectively.
Who is the course aimed at? This course is designed for both engineers with experience, and also for new entrants from a non-engineering background who want to pursue a new career as a Service Engineer. For those without an engineering background, it is recommended that you have a minimum grade C at GSCE Maths. Click here for more information