Nottinghamshire

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Name and explain the purpose of principle components, the basic construction, controls and terminology</li><li fr-original-style="" style="box-sizing: border-box;">Conform with manufacturers requirements as per the operators handbook, and relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks</li><li fr-original-style="" style="box-sizing: border-box;">Configure and ready for travel</li><li fr-original-style="" style="box-sizing: border-box;">Travel the crane to an area of work</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre in confined spaces</li><li fr-original-style="" style="box-sizing: border-box;">Configure the crane for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Explain rigging and de-rigging procedures when fitting a lattice-type extension</li><li fr-original-style="" style="box-sizing: border-box;">Explain actions required for hazards, underground and overhead services</li><li fr-original-style="" style="box-sizing: border-box;">Programme/set-up rated capacity indicators for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Lift various loads using the full radius and slewing capabilities of a crane</li><li fr-original-style="" style="box-sizing: border-box;">Accurately place loads, Minimise the swinging of loads</li><li fr-original-style="" style="box-sizing: border-box;">Change falls of rope on a hook block</li><li fr-original-style="" style="box-sizing: border-box;">Move loads through machine travel and comply with signals and instructions</li><li fr-original-style="" style="box-sizing: border-box;">Maintain safe working situations</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the crane in preparation of movement from lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Carry out shut down and securing procedures</li><li fr-original-style="" style="box-sizing: border-box;">Explain loading and unloading procedures for machine transporting</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Name and explain the purpose of principle components, the basic construction, controls and terminology
Conform with manufacturers requirements as per the operators handbook, and relevant regulations and legislation
Undertake all pre-use checks
Configure and ready for travel
Travel the crane to an area of work
Manoeuvre in confined spaces
Configure the crane for lifting duties
Explain rigging and de-rigging procedures when fitting a lattice-type extension
Explain actions required for hazards, underground and overhead services
Programme/set-up rated capacity indicators for lifting duties
Lift various loads using the full radius and slewing capabilities of a crane
Accurately place loads, Minimise the swinging of loads
Change falls of rope on a hook block
Move loads through machine travel and comply with signals and instructions
Maintain safe working situations
Prepare the crane in preparation of movement from lifting duties
Carry out shut down and securing procedures
Explain loading and unloading procedures for machine transporting
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

Dynamic Training and Assessments Ltd

Construction

NPORS

NPORS Crawler Crane (N103)

Course Overview&nbsp;This Level 2 NVQ Diploma in Directional Drilling Operations -Fluid Operative qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Fluid Operating within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Contributing to the specified drilling programme in the workplace -Operating drilling rigs to construct and form in the workplace -Carrying out mud, slurry or fluid plant operations in the workplace<h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview 
This Level 2 NVQ Diploma in Directional Drilling Operations -Fluid Operative qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Fluid Operating within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Contributing to the specified drilling programme in the workplace
-Operating drilling rigs to construct and form in the workplace
-Carrying out mud, slurry or fluid plant operations in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Fluid Operator 

General admission

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operative in the industry</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Be able to identify different types of transport, explain their purpose, the major components, basic construction, controls and terminology</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the loading / unloading area</li><li fr-original-style="" style="box-sizing: border-box;">Ensure that the transporter is correctly configured in readiness for loading and unloading</li><li fr-original-style="" style="box-sizing: border-box;">Explain hazards that may exist in the work area and how to avoid them, e.g. underground services, overhead power lines etc</li><li fr-original-style="" style="box-sizing: border-box;">Agree a method of communication and use it</li><li fr-original-style="" style="box-sizing: border-box;">Load or direct items of plant onto and off transporting vehicle</li><li fr-original-style="" style="box-sizing: border-box;">Arrange and secure items of plant on transport vehicle ready for transport on the public highway</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operative in the industry
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used and relevant legislation
Be able to identify different types of transport, explain their purpose, the major components, basic construction, controls and terminology
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Conduct all necessary safety checks at the loading / unloading area
Ensure that the transporter is correctly configured in readiness for loading and unloading
Explain hazards that may exist in the work area and how to avoid them, e.g. underground services, overhead power lines etc
Agree a method of communication and use it
Load or direct items of plant onto and off transporting vehicle
Arrange and secure items of plant on transport vehicle ready for transport on the public highway
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

CSCS (Construction Skills Certification Scheme)

NPORS Plant Loader and Securer (N120)

OverviewThe Level 3 NVQ Diploma in Supervising Licensed Asbestos Removal is a qualification that covers the practical skills and underpinning knowledge required by a supervisor in order to oversee the safe removal of licensed asbestos from a workplace.&nbsp;The objective of this qualification is to provide learners with the knowledge and skills to ensure that the plan of work for removal of licensed asbestos is followed safely with the resources provided and completed to the work schedule and budget.&nbsp;Learners will be able to supervise the setting up and removal of enclosures, removal and safe disposal of licensed asbestos and co-ordinate and organise all of the activities on site required for licensed asbestos removal.&nbsp;The qualification consists of seven mandatory units and three option units. Learners are required to take two of the option units together with all of the mandatory units in order to achieve the qualification.&nbsp;The units are:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Installing and Removing Licensed Asbestos Enclosure or Containment Areas in the Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Removing Licensed Asbestos in the Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Repairing or Encapsulating Asbestos-Containing Materials in the Workplace (Optional)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Confirming the Occupational Method of Work in the Workplace (Mandatory)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Confirming work activities and resources for an occupational work area in the workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Confirming Work Meets Contractual, Industry and Manufacturer&rsquo;s Standards in the Workplace (Optional)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&copy; RSPH 2019 2 Co-ordinating and Organising Work Operations in the Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Developing and maintaining professional working relationships in the workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Implementing and Maintaining Health, Safety, Environmental and Welfare Practices in the Workplace (Mandatory)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Monitoring Progress of Work Against Schedules in the Workplace (Optional)</li></ul>

Overview
The Level 3 NVQ Diploma in Supervising Licensed Asbestos Removal is a qualification that covers the practical skills and underpinning knowledge required by a supervisor in order to oversee the safe removal of licensed asbestos from a workplace. 
The objective of this qualification is to provide learners with the knowledge and skills to ensure that the plan of work for removal of licensed asbestos is followed safely with the resources provided and completed to the work schedule and budget.
 Learners will be able to supervise the setting up and removal of enclosures, removal and safe disposal of licensed asbestos and co-ordinate and organise all of the activities on site required for licensed asbestos removal. 
The qualification consists of seven mandatory units and three option units. Learners are required to take two of the option units together with all of the mandatory units in order to achieve the qualification. 
The units are: 
Installing and Removing Licensed Asbestos Enclosure or Containment Areas in the Workplace (Mandatory)
Removing Licensed Asbestos in the Workplace (Mandatory)
Repairing or Encapsulating Asbestos-Containing Materials in the Workplace (Optional)
Confirming the Occupational Method of Work in the Workplace (Mandatory)
Confirming work activities and resources for an occupational work area in the workplace (Mandatory)
Confirming Work Meets Contractual, Industry and Manufacturer’s Standards in the Workplace (Optional)
© RSPH 2019 2 Co-ordinating and Organising Work Operations in the Workplace (Mandatory)
Developing and maintaining professional working relationships in the workplace (Mandatory)
Implementing and Maintaining Health, Safety, Environmental and Welfare Practices in the Workplace (Mandatory)
Monitoring Progress of Work Against Schedules in the Workplace (Optional)



Asbestos

Level 3 Diploma in Supervising Licensed Asbestos Removal

Course OverviewThe Level 2 NVQ Certificate in Plant Operations &ndash; Movement Guide qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Movement Guide within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace<h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview
The Level 2 NVQ Certificate in Plant Operations – Movement Guide qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Movement Guide within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:

-Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.




Level 2 NVQ Certificate in Plant Operations - Movement Guide

COURSE INFORMATIONThe novice course is split into 4 days of training and one day of testing.&nbsp;By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.Days 1-4:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">Explanation of qualifications</li><li fr-original-style="" style="box-sizing: border-box;">Legislation controlling crane operations</li><li fr-original-style="" style="box-sizing: border-box;">BS 7121 Explanation</li><li fr-original-style="" style="box-sizing: border-box;">LOLER regulations in detail</li><li fr-original-style="" style="box-sizing: border-box;">Crane appreciation</li><li fr-original-style="" style="box-sizing: border-box;">Crane stability</li><li fr-original-style="" style="box-sizing: border-box;">Accessories</li><li fr-original-style="" style="box-sizing: border-box;">Safe slinging</li><li fr-original-style="" style="box-sizing: border-box;">Mobile crane selection</li><li fr-original-style="" style="box-sizing: border-box;">Risk assessment and method statement</li><li fr-original-style="" style="box-sizing: border-box;">Supervise a lift scenario</li><li fr-original-style="" style="box-sizing: border-box;">Practical induction</li><li fr-original-style="" style="box-sizing: border-box;">Case studies lift plan exercise</li><li fr-original-style="" style="box-sizing: border-box;">Procedures for planning lifts</li></ul>Day 5:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">NPORS Theory Test</li><li fr-original-style="" style="box-sizing: border-box;">NPORS Practical Assessment</li><li fr-original-style="" style="box-sizing: border-box;">RAMS and Lift Plan Exercise</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.Good understanding of spoken and written English.

COURSE INFORMATION
The novice course is split into 4 days of training and one day of testing. 
By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.
Days 1-4:
Introduction
Explanation of qualifications
Legislation controlling crane operations
BS 7121 Explanation
LOLER regulations in detail
Crane appreciation
Crane stability
Accessories
Safe slinging
Mobile crane selection
Risk assessment and method statement
Supervise a lift scenario
Practical induction
Case studies lift plan exercise
Procedures for planning lifts
Day 5:
NPORS Theory Test
NPORS Practical Assessment
RAMS and Lift Plan Exercise
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.
Good understanding of spoken and written English.

NPORS Appointed Person (N401)

Course OverviewThis Level 2 NVQ Diploma in Directional Drilling Operations -Driller qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Directional drilling within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units -Carrying out checks and/or basic maintenance on plant or machinery in the workplace -Drilling and completing holes to the drilling specification programme in the workplace -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Contributing to the specified drilling programme in the workplace<h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview
This Level 2 NVQ Diploma in Directional Drilling Operations -Driller qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Directional drilling within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units
-Carrying out checks and/or basic maintenance on plant or machinery in the workplace
-Drilling and completing holes to the drilling specification programme in the workplace
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Contributing to the specified drilling programme in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Rig Operator

OverviewThe Level 4 NVQ Diploma in Controlling Lifting Operations -Supervising Lifts (Construction) qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.&nbsp;This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Controlling Lifting Operations -Supervising Lifts within the construction industry.&nbsp;You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.&nbsp;This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.&nbsp;The learner will learn key practical skills and knowledge in these mandatory units:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">-Supervising Lifting Operations Using Lifting Equipment in the Workplace&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">-Maintaining the Dimensional Accuracy of the Work in the Workplace&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">-Co-ordinating Preparation Work for Site or Lifting Operations in the Workplace&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">-Allocating Work and Checking People&rsquo;s Performance in the Workplace</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Developing and Maintaining Good Occupational Working Relationships in the Workplace</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Maintaining Systems for Health, Safety, Welfare and Environmental Protection in the Workplace</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Coordinating and Organising the Control of Work in the Workplace&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">-Allocating and Monitoring the Use of Plant, Equipment or Machinery in the Workplace</li></ul><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Overview
The Level 4 NVQ Diploma in Controlling Lifting Operations -Supervising Lifts (Construction) qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. 
This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Controlling Lifting Operations -Supervising Lifts within the construction industry. 
You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. 
This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. 
The learner will learn key practical skills and knowledge in these mandatory units: 
-Supervising Lifting Operations Using Lifting Equipment in the Workplace
-Maintaining the Dimensional Accuracy of the Work in the Workplace
-Co-ordinating Preparation Work for Site or Lifting Operations in the Workplace
-Allocating Work and Checking People’s Performance in the Workplace
-Developing and Maintaining Good Occupational Working Relationships in the Workplace
-Maintaining Systems for Health, Safety, Welfare and Environmental Protection in the Workplace
-Coordinating and Organising the Control of Work in the Workplace
-Allocating and Monitoring the Use of Plant, Equipment or Machinery in the Workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Crane Supervisor

Lifting Operations

Level 4 NVQ Diploma in Controlling Lifting Operations - Supervising Lifts

Aberdeen

Castleford

Exeter

Glasgow

Heathrow

Manchester

Middlesbrough

Rainham

Southampton

Wellingborough

The aim of this course is to give delegates who have to use full working breathing apparatus during their working activities a greater understanding of correct operational procedures.Book via our website @ <a href="https://www.vp-ess.com/training/workplace-safety/breathing-apparatus-awareness-training/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ESS | Training Courses | Vp ESS (vp-ess.com)</a>

The aim of this course is to give delegates who have to use full working breathing apparatus during their working activities a greater understanding of correct operational procedures.
Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346


Vp ESS Training

Gas Safety

Construction Safety

Confined Space

Hazardous Areas

Health & Safety

Health & Safety At Work

COSHH (Control of Substances Hazardous to Health)

Safety Awareness

The aim of this course is to give delegates who have to use full working breathing apparatus during their working activities a greater understanding of correct operational procedures.

Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346


Breathing Apparatus Awareness Training

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.&nbsp;This course can be completed by both novice and experienced candidates.Novice course- 1/2 DayExperienced worker tests- 1/2 day theory assessment.COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&#39;s handbook for the particular harness / fall arrest to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify major components of the harness / fall arrest and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all safety checks in accordance with the manufacturer&#39;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of harness / fall arrest relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use</li><li fr-original-style="" style="box-sizing: border-box;">Correctly fit and remove the safety harness / fall arrest</li><li fr-original-style="" style="box-sizing: border-box;">Carry out end of work inspections</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage of harness / fall arrest</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

Who Should Attend
This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.
 This course can be completed by both novice and experienced candidates.
Novice course- 1/2 Day
Experienced worker tests- 1/2 day theory assessment.
COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities
Have a working knowledge of the manufacturer's handbook for the particular harness / fall arrest to be used
Be able to locate and identify major components of the harness / fall arrest and explain their functions
Conduct all safety checks in accordance with the manufacturer's and legislative requirements
Select suitable type of harness / fall arrest relative to the work being undertaken
Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use
Correctly fit and remove the safety harness / fall arrest
Carry out end of work inspections
Environmental considerations
Storage of harness / fall arrest
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Harness and Fall Arrest (N723)

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"> </div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will: <ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.
Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

General Admission

Slough

Newport

Milton Keynes 

Birmingham

Bedford

Liverpool 

NATIONALLY RECOGNISED AND ACCREDITED
LEVEL FOUR CERTIFICATE



This course comprises two parts:
 
Part 1 - online (eLearning)

AND

Part 2 - classroom

Part 2 consolidates on Parts 1 and delivers one full day of practical sessions (skill-set development) - PRP Harvesting and Treatment


Award:
Open College Network (OCN Credit4Learning) - Collegen Induction Therapy - PRP Treatment
LEVEL 4 (FDSc)



A modular "hybrid" course - eLearning (online) theory and one full day classroom based course.
 
PART 1 - THEORY ONLINE

Complete this part of your course online (eLearning Course) in the comfort of your own home or workplace.
Please allow 1-2 full days (approx. 12-16 hours in total) to complete this part of your course.
You do not need to complete this part of the course in one "sitting". Do as little or as much as you wish. Each time you log again exactly where you can start where you left off!
 
You must complete Part 1 before attending Part 2 below.
 
PART 2 - CLASSROOM
Attend in the classroom at the training location that you have selected.
Your classroom tutor will recap on the essential parts of your online course after which you will begin your practical sessions learning and developing the skills required to harvest and use Platelet-Rich Plasma in your treatment plan.
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary


A hybrid modular course awarding:
OCN Accredited Level Three Certificate (Advanced Level) 3 credits AND

GEOPACE Certificate (Collagen Induction Therapy - PRP Treatment)



Parts 1 (A & B) - online (eLearning) +

Part 2 - PRP Harvesting, Preparation & Treatment (one day)


Theory Sessions:


M01 – Course Overview
Learning outcomes, Understanding recommended guidelines (CPSA, HEE, NICE & WHO), Core Competencies (Domains 1, 2 & 3). National Occupational Standards


M02 – Qualifications – Levels & Thresholds
Understanding the range and applications of treatments at Levels 1 to 8. Equivalencies. Looking at each level and specific treatment types. Competencies at Level 4.


M03 – Culture & Diversity
Understanding culture and diversity within the context of a salon, including opportunities and challenges for aesthetic therapists. Diversity and inclusion. Principles of diversity.


M04 – History, Definitions and Roles
The origins of microneedling and development of PRP, evolution of treatments, types of equipment and range of applications. Historical perspective and modern day examples of PRP therapies.


M05 – Health & Safety & IPC
H&S legislation, Standard Precautions (for blood borne pathogens), Pathogen types, Personal Protective Equipment (PPE), Handwashing and Hygiene, Hazardous Waste Disposal (non-specific), Preventing Needlestick Injuries. A detailed look at viruses, bacteria and fungi. Handling clients with infectious conditions and infestations. Transmission modes. Sterilisation processes in the workplace, including autoclaves.


M06 – Regulatory Obligations
Pathways – employed, contracted and self-employed, Management of H&S at work, Local and national government laws and bylaws, DBS types, Record Keeping, Hazardous Waste Disposal (specific), Insurance and insurance types, Accident reporting, The Keogh Review, HEE guidelines, Professional bodies.


M07 – Professionalism & Effective Communication
Presenting a professional image, guidelines and recommendations. How to effectively communicate with your clients and colleagues, communication methods, communicating efficiently in consultation.


M08 – Consent
Understanding consent types and your client’s capacity to consent. The importance of valid consent. Consent frequency. Risk assessment. Storing consent documentation – looking at paper and digital/cloud. Consent and the law. Determining if consent is robust.


M09 – Environmental and Sustainable Work Practices
Sustainability in the workplace. Running an efficient salon (water efficiency, waste reduction, interior fittings). Advancements including digital options (clients and suppliers).


M10 – Anatomy & Physiology
A&P for collagen induction therapy. Veins, arteries and capillaries (phlebotomy overview). The integumentary system – structure and function. Microneedling – depths and penetration. The lymphatic system. The circulatory system. Skin as a defence barrier. Skin – functions and layers. Merkel cells, Langerhans Cells, Keratinocytes and Melanocytes. The epidermal-melanin unit. Fibroblasts and connective tissue. The effects of ageing. Skin changes over time. Skin rejuvenation including optimising cell function and increasing natural collagen. Inducing regenerative healing. The Fitzpatrick Scale. A detailed look at cell function, specifically melanocytes, keratinocytes and fibroblasts. Microneedling the skin, effects and collagen response. Wound healing – stages (haemostasis, inflammatory, proliferative and maturation). Collagen Induction Therapy (CIT). Topical applications to improve keratinocyte function. Topical applications to improve collagen synthesis.


M11 – Patient Management – Consultation & Examination
Pre-treatment and treatment consultations. Client Motives. Educating your client. Developing a consultation plan. Medical Records. Contraindications & Precautions – Relative and Absolute Contraindications in microneedling. Microneedling and anticoagulants. Side effects and treatment failure. Photo-documentation. Looking at and recording a detailed medical history. Client reviews. Health risks. Legalities.


M12 – Record Keeping
Key points and importance. Understanding how to retain records. Claims - Date of Discovery and Date of Knowledge.


M13 – Platelet Rich Plasma (PRP) – Understanding the basics
Whole blood – composition. Platelets and growth factors (types and functions). What are platelets? Understanding platelet modes of action. Platelet Rich Plasma – preparation. PPP and PRP. PRP Activation and collagen response in vivo. Fibrin network formation. Dermal needle puncture - repair pathway. Examples of microneedling applications. Needle depths and facial skin thickness. Types of treatments – a case by case examination.


M14 – Platelet Rich Plasma (PRP) – Harvesting and Preparation
Phlebotomy. Using correct needle size and anticoagulant. Understanding autologous treatment types with PRP. The treatment agent pathway. Whole blood processing. Harvesting good quality PRP - step by step procedure. Using a centrifuge. Centrifuge operation and management. Steps to minimise platelet trauma. First and second centrifuge processes. Understanding how a centrifuge works? Managing breakage and spillage.


M15 – PRP Treatment – putting it all together!
Client arrival, management, documentation, photography, examination, consultation, consent, treatment plan. Patient ID, where necessary. Referrals and when to refer. Seeking expert advice. Employment types – employed (PAYE), contracted, self-employed (freelance) - detailed look at each. Managing equipment and consumables. Compliancy. Pre-treatment guidance. Medications and drug conflicts. Preparing a treatment area. Preparing your client. Disinfecting the face. Applying numbing cream. Phlebotomy procedures.
Blood handling. Dermapen types and accessories. Treatment modes and actions. Selecting the correct needle depth. Applying PRP and microneedling. Managing pen depth and skin areas. Working within facial zones. Post treatment management. Waste management and correct waste disposal. Post treatment client management. Aftercare. Managing adverse effects. Managing post treatment client expectations. Treatment intervals. Post treatment checklists and patient aftercare guidelines.


Classroom Practical Sessions:
Practical Session 1: Equipment familiarisation - hands-on approach
Practical Session 2: Completing medical forms and consent forms
Practical Session 3: Preparing a treatment area
Practical Session 4: Using a centrifuge
Practical Session 5: Performing a microneedling facial treatment with PRP - model 1
Practical Session 6: Performing a microneedling facial treatment with PRP - model 2


Classroom Support Material:
Support material to complement Modules 1 – 15


Online Support Material:
Downloadable pdf files - support material to complement Modules 1 - 15
Demonstration Video



Geopace Training

Medical Aesthetics

Allied Health

Platelet-rich plasma (PRP)

Aesthetics

Aesthetic Practitioner

Facial Aesthetics

Platelet-rich Plasma (PRP) treatments

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    Open College Network Accreditation

    Level 4 (as required for minimally invasive procedures)

    Covers standards set by HEE

    Employed (salon) or Self-Employed opportunities

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


PRP - Collagen Induction Therapy Course (GPT701)

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Dover.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Dover

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Kent.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Kent

ECS Card Health & Safety Course Newcastle

This 1-day Driver CPC Periodic Training course focuses on critical areas of Emergency Aid and Security for professional drivers. Designed to meet Driver CPC requirements, this course equips drivers with essential skills for handling emergency situations and enhancing security awareness on the road.
Who Should Attend:
This course is ideal for all professional drivers required to complete Driver CPC Periodic Training to maintain their Driver CPC Licence. It’s tailored to both experienced drivers and those new to the field, providing relevant, up-to-date skills and knowledge.
Learning Objectives:
The aim of this course is to confirm and expand on each driver’s current knowledge and skills, ensuring they are informed about the latest legislation, best practices, and critical safety procedures. This training is designed to enhance drivers’ confidence and preparedness in managing emergencies and maintaining security awareness, helping them navigate the responsibilities of their role effectively.

Course Format: Online 

Join us to reinforce your skills, stay compliant, and improve your on-road safety practices!

Total Compliance 

Driver CPC - 1 Day Periodic 7 Hour Course - Security Training & Emergency Aid

Mental Health First Aid Refresher 4-hour training sessionsCan you remember ALGEE?&nbsp;Mental Health Action Plan.Empower Mental Health First Aiders and Champions to maintain their skills with regular Refresher training. Just like physical first aid, we recommend that you refresh your skills every two to three years. (Certificate expires after 3 years). &nbsp;If it&#39;s time to update your skills, book onto an MHFA Refresher course now and feel confident that you are performing your vital role safely.Revisit the key areas from the full course. Keep up to date with the latest statistics and information.If you are a Mental Health First Aider or MHFA Champion you have skills for life that support you and the people around you. &nbsp;Mental Health First Aid training can be kept up to date through this four hour MHFA Refresher course, which will empower you to: &nbsp;Update your knowledge of mental health and what influences it Update your awareness of current mental health supports available Practise applying the Mental Health First Aid Action Plan. Learning takes place through a mix of presentations, group discussions and workshop activities. We limit numbers to 20 people per course so that the instructor can keep people safe and supported, to get the most from their learning experience with us.This course is for those that have completed the MHFA England Mental Health First Aid or Champion course.&nbsp;<a href="https://www.mindmapswellbeing.com/faq-s/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">FAQs</a>

Mental Health First Aid Refresher 
4-hour training 
Can you remember ALGEE? Mental Health Action Plan.
Empower Mental Health First Aiders and Champions to maintain their skills with regular Refresher training. Just like physical first aid, we recommend that you refresh your skills every two to three years. (Certificate expires after 3 years). If it's time to update your skills, book onto an MHFA Refresher course now and feel confident that you are performing your vital role safely.
 The MHFA Refresher course takes four hours to complete and will enable learners to: 
Keep their knowledge, awareness, and skills of mental health support current
Update their knowledge of mental health and what influences it
Practice applying the Mental Health First Aid action plan
Once you have completed your MHFA Refresher course, you will be certified for three years. You will also be invited to become or stay a member of MHFA England's Association of Mental Health First Aiders, making sure you have everything you need to feel confident when supporting others. 
I have an existing Level 3 mental health qualification; can I refresh with you? 
As part of the MHFA vision to improve the mental health of the nation, we are now able to accept other Level 3 qualifications from other providers as entry points for this course.

This includes:
FutureQuals Level 3 Award in Mental Health: Workplace First Aider
FAA Level 3 Award in Supervising First Aid for Mental Health (RQF)
For more information on the qualifications, we accept, please contact t info@mindmapswellbeing.com 

FAQs

Mindmaps Wellbeing

Mental Health Awareness

Mental Health First Aid

Approved Training Organisation (ATO)

Health & Wellbeing

Occupational Health & Wellbeing

Mental Health

Accredited Mental Health First Aid

Wellbeing

Mental Resilience

Mental Health At Work

Mental Health Nurse

Empower Mental Health First Aiders and Champions to maintain their skills with regular Refresher training. Just like physical first aid, we recommend that you refresh your skills every two to three years. (Certificate expires after 3 years).  If it's time to update your skills, book onto an MHFA Refresher course now and feel confident that you are performing your vital role safely.

MHFA England Refresher 

Course price is £395.00 + Vat @20% (£474 total) 
(We raise a seperate VAT invoice following payment)
This Renewables Technical Surveying training, short two day course, is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Renewables Technical Site Surveying prior to any renewables installation measures, this includes for heating systems, solar systems and EV Charge point installations. 
The course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewables Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable individuals with a basic level of knowledge in varying building structures, heating systems and varying renewable technologies.
Note: A minimum number of 5 deligates is required. If the course is under subscribed you will be asked to re-arrange your course date.
  During this technical training course we will provide the following:
Day 1 - (Morning) Build Surveying Knowledge
Procuring the correct technical surveying equipment
Procuring and downloading technical surveying software packages
Identifying the differences in Home Heating products and their various characteristics
The basics of Heat pumps & low temperature hydronics
Identifying typical heating pipework and heating system elements
Identifying suitable locations for the Installation of Heat Pumps & Hot Water Cylinders
Carrying out MCS020 compliant Noise Level Assessments
Local Planning restrictions in England & Wales, Scotland & Northern Ireland
Preparing for typical homeowner questions around low temperature heating, solar systems and battery storage
Day 1 - (Afternoon) Solar Surveying & Regulatory Renewable Standards
Gathering reliable site data for Solar System design
Identification of typical Rooflines & Tile configurations for Solar Panel Installations
Identification of possible shading to proposed roofline areas
Gathering details of rafter dimensions and roof pitch angles
Identification of Meters and Earth Bonding Arrangement
Identifying safe and compliant locations for battery storage facilities
Day 2 - (Morning) Carrying out effective site surveying techniques
Completing fully detailed digital building floor plans & renewable energy reports
How to provide relevant and useful site video evidence
360 Images - how to take them & their benefits
Completing detailed form information for basic health & safety purposes
Completing detailed form information for current Building Construction Elements
Completing detailed form information for current Heating System Elements
Correct trade insurance levels for Renewables Surveyors
Day 2 - (Afternoon) Using Technology to enhance survey data
Task 1 - Group activity using 360 walkthrough - Carry out detailed Surveying for producing heat loss calculations using digital floor plan software and digital form data we take you through the process
Task 2 - Individual activity - Carry out a detailed Survey for producing heat loss calculations & Solar survey from data provided
Multiple Choice Learning Check
Set out home task (Optional) - complete a survey on your own home using the provided software, which the learner will then receive feedback on.
The course will provide learners with intuitive guidance on how to set up surveying software and fully complete renewables technical site surveys using digital floor planning software, efficient use of digital survey forms, as well as having access to our full range of really helpful surveyor resources.



Building Metrix

Solar Installation

Surveying

Renewable Energy

Heat Pump

Building Surveying

Heat Pump Installation

Heating Engineer

This Renewables Technical Surveying training short two day course is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Renewables Technical Site Surveying prior to any renewables installation measures, this includes for heating systems, solar systems and EV Charge point installations. 
The course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewable Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable individuals with a basic level of knowledge in varying building structures, heating systems and varying renewable technologies.   


276 Health & Safety courses in London

NPORS Crawler Crane (N103)

By Dynamic Training and Assessments Ltd

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Fluid Operator

By Dynamic Training and Assessments Ltd

NPORS Plant Loader and Securer (N120)

By Dynamic Training and Assessments Ltd

Level 3 Diploma in Supervising Licensed Asbestos Removal

By Dynamic Training and Assessments Ltd

Level 2 NVQ Certificate in Plant Operations - Movement Guide

By Dynamic Training and Assessments Ltd

NPORS Appointed Person (N401)

By Dynamic Training and Assessments Ltd

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Rig Operator

By Dynamic Training and Assessments Ltd

Level 4 NVQ Diploma in Controlling Lifting Operations - Supervising Lifts

By Dynamic Training and Assessments Ltd

Breathing Apparatus Awareness Training

By Vp ESS Training

NPORS Harness and Fall Arrest (N723)

By Dynamic Training and Assessments Ltd

Search By Location