3885 Evaluation courses

ILM Level 5 Certificate in Leadership & Management – 9 day Accredited training course delivered in Nottingham A 7 day course delivered over 5 months – one day each 3 weeks or thereabouts. Combination of fully interactive, tutor led online training and traditional face to face at our purpose designed training centre in Nottinghamshire. The Level 5 is the industry standard which most corporate organisations, or professional associations would look for to establish credibility as a “qualified” coach. Participants on the programme, and those who attain the qualification will be entitled to a 25% off membership of the EMCC “European Coaching and Mentoring Council” Membership, the leading association in the field of Coaching and Mentoring. More information can be found here It provides a prestigious qualification for individuals who wish to become more effective at coaching and mentoring practice. Suitable for line managers who are required to enable and develop others; those with coaching or mentoring within the wider scope of their role; and those who have an active interest in coaching or mentoring and may wish to undertake freelance work. Participants must have access to a minimum of two coachees during the course to undertake at least eighteen hours of coaching outside of the course days*

About this Virtual instructor Led Training (VILT)  The Subsea Production Engineering Virtual instructor Led Training (VILT) course provides an overview of all of the functionalities and key interfaces of subsea equipment. The VILT course will refer to relevant industry engineering standards for subsea equipment, subsea tie-backs and critical operational requirements. The sessions will cover challenges associated with equipment design and installability, as well as a new module on subsea tie-backs. The primary learning objectives for this VILT course are met through a combination of interactive presentations, discussion and exercises. Training Objectives By the end of this VILT course, participants will be able to: Apply the requirements of related industry standards (API 6A/ 17D, API 17A etc.) engineering standards Understand the barrier and qualification requirements Identify the barriers in place given a specific mode of operation Evaluate and select which tree alternatives are valid based on the key design drivers Identify and describe the key design drivers Explain the importance of well kill rate Describe which tree alternatives are valid for certain scenarios based on an evaluation of the key tree design requirements Examine what effects subsurface requirements may have on tree design Understand the challenges associated with designing equipment for manufacturability and installability Recognise the implications of design changes to specific components and the effects on transportation and installation (such as what type of vessels, lifting equipment, and tools to use and the logistical requirements) Recognise the implication of design changes on manufacturability of subsea equipment Target Audience This VILT course provides a comprehensive understanding of the equipment used in subsea production systems. It is designed for petroleum engineers, production engineers, subsea project engineers and is also highly suitable for cost, planning, offshore installation and offshore operations engineers. Anyone directly or indirectly involved with subsea equipment will benefit from attending this VILT course - from engineers installing the equipment to procurement staff looking to understand more. Training Methods The VILT course will be delivered online in 4 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day. Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total). Trainer Most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil & Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training & Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training & Development consultant. Building a reputation for delivering training and development to the Oil & Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching & mentoring to achieve high levels of competence for the client's staff and customers. He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic & Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel & Development and Society of Underwater Technologies. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Project Management Fundamentals - Japanese: On-Demand Many projects are run by highly qualified, talented people with little or no training in project management. They carry out projects such as process improvement, marketing campaign development, new product development, event planning and production, as if they were "work". Project Management Fundamentals (PMF) was created to help those who need a solid foundation in project management to learn on the job without undue burden. is. This course provides practical skills, concepts and principles that you can take back to the workplace, and the insight you need to adapt them to your specific project environment. PMF's course goal is to achieve quality performance by learning effective planning and control, so it emphasizes process-oriented and analytical, systems-oriented approaches. These frameworks promote the project-related problem-solving and decision-making skills needed in real-world projects. We also focus on the collaboration, clear person-to-person communication, interpersonal and interpersonal skills required for the project. These needs are recognized throughout PMF, but are highlighted in two areas: Module 2 - People and Projects Module 8 - Execution, Communication and Team Development What You Will Learn By the end of this course, you should be able to: Explain the value of strong project management Identify the characteristics of successful projects and project managers Recognize how current agile/adaptive practices fit into project management Learn project management processes such as initiation, planning, execution, monitoring and control, and closing Leverage project management processes and tools based on case studies and real-world situations Create initial project plan Using standard project management terminology Basic Concepts Project management and its definition PM value and key points Competing Constraints and Project Success Project life cycle People and Projects Overview of people and projects Project manager Project team people and projects in the organization Module 3 - Initiation and Requirements Definition Project launch Formulation of project charter Conducting stakeholder evaluations Requirements definition Using the Work Breakdown Structure Define Work Breakdown Structure (WBS) Development of usable WBS Utilization of WBS Project Risk Management Need for risk management Overview of risk-aware planning Identification of risks Risk analysis Risk response plan Implementing countermeasures and monitoring risks Environmental considerations that require adaptability Quotation Quote definition Quotation approach How to estimate cost estimate Quotation Validation Scheduling Definition of the scheduling process and related terms Defining sequences and dependencies Determining the critical path Examination of schedule risk and optimization of schedule Execution, Communication and Team Development From baseline to execution Project communication and stakeholder relationships high performance team Monitoring and Control Definition of monitoring and control See control through the lens of competing demands Variance analysis and corrective action (earned value) Adaptive environment considerations Project Closure Closing the project Focus on project migration Focus on post-project evaluation

Project Management Fundamentals - Japanese: On-Demand Many projects are run by highly qualified, talented people with little or no training in project management. They carry out projects such as process improvement, marketing campaign development, new product development, event planning and production, as if they were "work". Project Management Fundamentals (PMF) was created to help those who need a solid foundation in project management to learn on the job without undue burden. is. This course provides practical skills, concepts and principles that you can take back to the workplace, and the insight you need to adapt them to your specific project environment. PMF's course goal is to achieve quality performance by learning effective planning and control, so it emphasizes process-oriented and analytical, systems-oriented approaches. These frameworks promote the project-related problem-solving and decision-making skills needed in real-world projects. We also focus on the collaboration, clear person-to-person communication, interpersonal and interpersonal skills required for the project. These needs are recognized throughout PMF, but are highlighted in two areas: Module 2 - People and Projects Module 8 - Execution, Communication and Team Development What You Will Learn By the end of this course, you should be able to: Explain the value of strong project management Identify the characteristics of successful projects and project managers Recognize how current agile/adaptive practices fit into project management Learn project management processes such as initiation, planning, execution, monitoring and control, and closing Leverage project management processes and tools based on case studies and real-world situations Create initial project plan Using standard project management terminology Basic Concepts Project management and its definition PM value and key points Competing Constraints and Project Success Project life cycle People and Projects Overview of people and projects Project manager Project team people and projects in the organization Module 3 - Initiation and Requirements Definition Project launch Formulation of project charter Conducting stakeholder evaluations Requirements definition Using the Work Breakdown Structure Define Work Breakdown Structure (WBS) Development of usable WBS Utilization of WBS Project Risk Management Need for risk management Overview of risk-aware planning Identification of risks Risk analysis Risk response plan Implementing countermeasures and monitoring risks Environmental considerations that require adaptability Quotation Quote definition Quotation approach How to estimate cost estimate Quotation Validation Scheduling Definition of the scheduling process and related terms Defining sequences and dependencies Determining the critical path Examination of schedule risk and optimization of schedule Execution, Communication and Team Development From baseline to execution Project communication and stakeholder relationships high performance team Monitoring and Control Definition of monitoring and control See control through the lens of competing demands Variance analysis and corrective action (earned value) Adaptive environment considerations Project Closure Closing the project Focus on project migration Focus on post-project evaluation

Duration 3 Days 18 CPD hours This course is intended for The primary audience for this course is anyone who works in and around IT, facilities or data centre operations and needs to understand and improve the daily operations including important processes such as lock-out/tag-out, the right process for installing/de-installing equipment, safety procedures, capacity management and much more. Overview The old believe that a fully redundant data centre facility will save the day is no longer true as many research outcomes have revealed that the majority of downtime is caused by the human factor. Policies, processes, procedures and work instructions should be carefully developed, ideally following relevant standards, to ensure an effcient and effective data centre operations which are also compliant to the required regulations. The CDFOS© (Certified Data Centre Facilities Operations Specialist) course is a three-day course which will enable participants to fully understand the requirements of running the day-to-day operations of a mission critical data centre. Participants will gain all the required competences for running the daily operations, understand which processes should be in place, and the critical elements of those processes and how to execute them. The course is fully aligned with the DCOS© (Data Centre Operations Standard). Data centre facilities operations management have proven to be the key differentiator between a data centre that is performing well or badly. Service Level Management Service Level Management Needs analysis Capability assessment Service portfolio and catalogue Service Level Agreements Reporting - Complaint procedure Customer satisfaction Service Improvement Process (SIP) Safety and Crisis Management Most common type of accidents and why they often happen The roles and responsibilities of appointed safety staff The importance of the OH&S or WHS manual Calibration of measurement and test equipment Proper lock-out/tag-out procedures Emergency response plan requirement for various potential emergencies The importance of Permit To Work Physical Security Standard Operating Procedures (SOP) for security Security risk assessment Security zones Physical inspections / security patrols Delivery of goods / holding area Entry control of individuals Badges and key management Security monitoring Security incident reporting Facilities Maintenance The importance of maintenance Maintenance definitions Maintenance operations procedures (MOP) Service reports Spare management Tools Housekeeping Data Centre Operations Shift handover Walk around duties Service management Release management Configuration management Floor management Equipment life cycle management Monitoring/Reporting/Control Monitoring requirements Facilities monitoring matrix Sensor / alarm point testing and calibration Notification matrix Escalation requirements Reporting Project Management Project management Project organization Project manager Initiation Planning Execution Monitor and control Closing Evaluation / lessons learnt Environmental Sustainability The importance of sustainability Environmental standards Power efficiency indicators Energy saving best practises Water management Sustainable energy usage Governance and Compliance The importance of document management The siz sub-processes of document management Asset management Requirements or asset recording Exam: Certified Data Centre Facilities Operations Specialist (CDFOS©) Certification exams are administered at the end of the course. The exam is a 90-minute closed book exam, with 60 multiple-choice questions. The candidate requires a minimum of 42 correct answers to pass the exam. Online exam results are known immediately and paper-based exam results will be known within one week. Additional course details: Nexus Humans Certified Data Centre Facilities Operations Specialist (CDFOS) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Facilities Operations Specialist (CDFOS) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

About this Training Course There are various kinds of geophysical data available. They are separated into seismic and non-seismic (multi-physics) data. Non-seismic or multi-physics data (which includes gravity, magnetics, electrical, electromagnetics, spectral etc - apart from providing complimentary information to seismic) is the main source of information for very shallow subsurface applications such as engineering, mapping pollution, archaeology, geothermal energy, and related areas. This 5 full-day blended course will focus specifically on seismic data which is the main method used in the Oil & Gas industry. In this blended course, participants will be equipped to understand that seismic data represents the movement of the surface, resulting from waves generated by a source, dynamite or vibrator which are reflected by changes in the subsurface rocks. The basic principles of acquisition and processing will be explained and insights into advanced methods, allowing a much more accurate interpretation of seismic data than previously considered possible, will also be provided. This blended course contains an introduction to Machine Learning and its important role in all aspects of seismic acquisition, processing, and interpretation. There is no need to know in detail how the algorithms work internally but it is necessary to know how to use them correctly to achieve optimum results. Training Objectives By attending this course, participants will be able to acquire the following: Obtain an understanding of the strengths and limitations of geophysical methods, specifically seismic, and the costs and risks involved, and how to reduce these. Be able to communicate more effectively with staff in other disciplines. Understand the potential applications of seismic data and know how to formulate the requirements needed for prospect and field evaluation. Gain an awareness of modern seismic technology. Apply the learning in a series of practical, illustrative exercises. Know what types of questions to ask to assess the necessary quality of a seismic project in its role in a sequence of E&P activities Target Audience The blended course is intended for non-geophysicists who have intensive interaction with geophysicists. But it may be of interest to those who want to know about the recent progress made in geophysics, leading to amazing imaging results, which could not be imagined a decade ago. The blended course will bring to the attention of the geologists, petrophysicists and reservoir/petroleum engineers an awareness of how the data they will work with is acquired and processed by the geophysicist. It will introduce the concepts that are of importance in geophysics and thus relevant for non-geophysicists to know and be able to communicate with geophysicists as well as formulate their requests. Course Level Intermediate Trainer Your expert course leader has degree in Geology (University of Leiden), a Master's degree in Theoretical Geophysics (University of Utrecht) and a PhD in Utrecht on 'Full wave theory and the structure of the lower mantle'. This involved forward modelling of P- and S-waves diffracted around the core-mantle boundary and comparison of the frequency-dependent attenuation of the signal with those obtained from major earthquakes observed at long offsets in the 'shadow zone' of the core. These observations were then translated into rock properties of the D' transition zone. After his PhD, he joined Shell Research in The Netherlands to develop methods to predict lithology and pore-fluid based on seismic, petrophysical and geological data. He subsequently worked for Shell in London to interpret seismic data from the Central North Sea Graben. As part of the Quantitative Interpretation assignment, he was also actively involved in managing, processing and interpreting Offshore Seismic Profiling experiments. After his return to The Netherlands, he headed a team for the development of 3D interpretation methods using multi-attribute statistical and pattern recognition analysis on workstations. After a period of Quality Assurance of 'Contractor' software for seismic processing, he became responsible for Geophysics in the Shell Learning Centre. During that period, he was also a part-time professor in Applied Geophysics at the University of Utrecht. From 2001 to 2005, he worked on the development of Potential Field Methods (Gravity, Magnetics) for detecting oil and gas. Finally, he became a champion on the use of EM methods and became involved in designing acquisition, processing and interpretation methods for Marine Controlled Source EM (CSEM) methods. After his retirement from Shell, he founded his own company, specialising in courses on acquisition, processing and interpretation of geophysical data (seismic, gravity, magnetic and electromagnetic data), providing courses to International and National energy companies. In the last couple of years, he became keenly interested in the use of Machine Learning in Geophysics. Apart from incorporating 'Artificial Intelligence' in his courses, he also developed a dedicated Machine Learning course for geophysics. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Strategies for Differentiation and Effective Classroom Management (30 Hours)

Explore the complexities of seismic interpretation in carbonates through our dynamic classroom training course. Energyedge delivers cutting-edge instruction and valuable insights.

Overview The Corporate Social Responsibility (CSR) Diploma course provides an introduction to CSR, exploring topics such as stakeholders and the social contract, a sustainable perspective, implementing CSR initiatives, and performance evaluation and reporting. Learning Outcomes of Corporate Social Responsibility Diploma: Develop a comprehensive understanding of corporate social responsibility and its significance in modern business. Gain knowledge about the importance of stakeholders and the social contract in CSR. Understand the concept of sustainability and its role in shaping CSR practices. Learn how to effectively implement CSR initiatives within organizations. Acquire skills in performance evaluation and reporting to measure the impact of CSR efforts. Why buy this Corporate Social Responsibility Diploma? Unlimited access to the course for a lifetime. Opportunity to earn a certificate accredited by the CPD Quality Standards and CIQ after completing this course. Structured lesson planning in line with industry standards. Immerse yourself in innovative and captivating course materials and activities. Assessments designed to evaluate advanced cognitive abilities and skill proficiency. Flexibility to complete the Course at your own pace, on your own schedule. Receive full tutor support throughout the week, from Monday to Friday, to enhance your learning experience. Unlock career resources for CV improvement, interview readiness, and job success. Certification After studying the course materials of the Corporate Social Responsibility Diploma there will be a written assignment test which you can take either during or at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this Corporate Social Responsibility Diploma course for? Individuals aspiring to lead in corporate environments with a focus on ethical and responsible practices. Entrepreneurs seeking to integrate social responsibility into their business models. Non-profit professionals aiming to collaborate effectively with corporates on social initiatives. Academic researchers and students interested in the evolving field of CSR. Policy makers and government officials looking to understand corporate impacts on society and the environment. Prerequisites This Corporate Social Responsibility Diploma does not require you to have any prior qualifications or experience. You can just enrol and start learning.This Corporate Social Responsibility Diploma was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path As this course comes with multiple courses included as bonus, you will be able to pursue multiple occupations. This Corporate Social Responsibility Diploma is a great way for you to gain multiple skills from the comfort of your home. Course Curriculum CSR Module 01: Introduction to Corporate Social Responsibility Introduction to Corporate Social Responsibility 00:24:00 CSR Module 02: Stakeholders & the Social Contract Stakeholders & the Social Contract 00:15:00 CSR Module 03: A Sustainable Perspective A Sustainable Perspective 00:15:00 CSR Module 04: Implementing CSR Implementing CSR 00:20:00 CSR Module 05: Performance Evaluation and Performance Reporting Performance Evaluation and Performance Reporting 00:17:00 Assignment Assignment - Corporate Social Responsibility Diploma 00:00:00

Listening is challenged by attention and inference-making problems. Critical listening demands concentration, curiosity, and clarity with organization and evaluation. Discover how to increase understanding and what is the difference between people-orientated, action-orientated, content-orientated and time-orientated. Learning Objectives Demonstrate concentration, curiosity, and clarity as a critical listener, Explain how to give appropriate feedback, Identify five listening styles to meet different needs Target Audience Managers, Team Leaders, Young Professionals, Sales Professionals, Customer Service Teams