Nottinghamshire

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Name and explain the purpose of principle components, the basic construction, controls and terminology</li><li fr-original-style="" style="box-sizing: border-box;">Conform with manufacturers requirements as per the operators handbook, and relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks</li><li fr-original-style="" style="box-sizing: border-box;">Configure and ready for travel</li><li fr-original-style="" style="box-sizing: border-box;">Travel the crane to an area of work</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre in confined spaces</li><li fr-original-style="" style="box-sizing: border-box;">Configure the crane for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Explain rigging and de-rigging procedures when fitting a lattice-type extension</li><li fr-original-style="" style="box-sizing: border-box;">Explain actions required for hazards, underground and overhead services</li><li fr-original-style="" style="box-sizing: border-box;">Programme/set-up rated capacity indicators for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Lift various loads using the full radius and slewing capabilities of a crane</li><li fr-original-style="" style="box-sizing: border-box;">Accurately place loads, Minimise the swinging of loads</li><li fr-original-style="" style="box-sizing: border-box;">Change falls of rope on a hook block</li><li fr-original-style="" style="box-sizing: border-box;">Move loads through machine travel and comply with signals and instructions</li><li fr-original-style="" style="box-sizing: border-box;">Maintain safe working situations</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the crane in preparation of movement from lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Carry out shut down and securing procedures</li><li fr-original-style="" style="box-sizing: border-box;">Explain loading and unloading procedures for machine transporting</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Name and explain the purpose of principle components, the basic construction, controls and terminology
Conform with manufacturers requirements as per the operators handbook, and relevant regulations and legislation
Undertake all pre-use checks
Configure and ready for travel
Travel the crane to an area of work
Manoeuvre in confined spaces
Configure the crane for lifting duties
Explain rigging and de-rigging procedures when fitting a lattice-type extension
Explain actions required for hazards, underground and overhead services
Programme/set-up rated capacity indicators for lifting duties
Lift various loads using the full radius and slewing capabilities of a crane
Accurately place loads, Minimise the swinging of loads
Change falls of rope on a hook block
Move loads through machine travel and comply with signals and instructions
Maintain safe working situations
Prepare the crane in preparation of movement from lifting duties
Carry out shut down and securing procedures
Explain loading and unloading procedures for machine transporting
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

Dynamic Training and Assessments Ltd

Construction

NPORS

NPORS Crawler Crane (N103)

COURSE INFORMATIONThe novice course is split into 4 days of training and one day of testing.&nbsp;By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.Days 1-4:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">Explanation of qualifications</li><li fr-original-style="" style="box-sizing: border-box;">Legislation controlling crane operations</li><li fr-original-style="" style="box-sizing: border-box;">BS 7121 Explanation</li><li fr-original-style="" style="box-sizing: border-box;">LOLER regulations in detail</li><li fr-original-style="" style="box-sizing: border-box;">Crane appreciation</li><li fr-original-style="" style="box-sizing: border-box;">Crane stability</li><li fr-original-style="" style="box-sizing: border-box;">Accessories</li><li fr-original-style="" style="box-sizing: border-box;">Safe slinging</li><li fr-original-style="" style="box-sizing: border-box;">Mobile crane selection</li><li fr-original-style="" style="box-sizing: border-box;">Risk assessment and method statement</li><li fr-original-style="" style="box-sizing: border-box;">Supervise a lift scenario</li><li fr-original-style="" style="box-sizing: border-box;">Practical induction</li><li fr-original-style="" style="box-sizing: border-box;">Case studies lift plan exercise</li><li fr-original-style="" style="box-sizing: border-box;">Procedures for planning lifts</li></ul>Day 5:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">NPORS Theory Test</li><li fr-original-style="" style="box-sizing: border-box;">NPORS Practical Assessment</li><li fr-original-style="" style="box-sizing: border-box;">RAMS and Lift Plan Exercise</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.Good understanding of spoken and written English.

COURSE INFORMATION
The novice course is split into 4 days of training and one day of testing. 
By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.
Days 1-4:
Introduction
Explanation of qualifications
Legislation controlling crane operations
BS 7121 Explanation
LOLER regulations in detail
Crane appreciation
Crane stability
Accessories
Safe slinging
Mobile crane selection
Risk assessment and method statement
Supervise a lift scenario
Practical induction
Case studies lift plan exercise
Procedures for planning lifts
Day 5:
NPORS Theory Test
NPORS Practical Assessment
RAMS and Lift Plan Exercise
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.
Good understanding of spoken and written English.

NPORS Appointed Person (N401)

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

CSCS (Construction Skills Certification Scheme)

NPORS Rough Terrain Lift Truck (N009) 

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Side Loader (N006)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&#39;s handbook for the particular machine to be used and other relevant sources of information</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with the manufacturer&#39;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and / or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer's handbook for the particular machine to be used and other relevant sources of information
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with the manufacturer's and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and / or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

Plant Operator

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

Overhead Crane Operator

Lifting Operations

Heavy Equipment Operator

NPORS Industrial Telescopic Handler (N010A)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&#39;s handbook and other sources of information, regulations and legislation applicable to the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the vehicle and loader crane and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify all operating controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with the manufacturer&#39;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Configure the vehicle and loader crane ready for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely across varying terrain in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Correctly deploy the stabilizers according to stated manufacturer&#39;s specifications</li><li fr-original-style="" style="box-sizing: border-box;">Comply with all requirements for rated capacity indicators or load moment indicators</li><li fr-original-style="" style="box-sizing: border-box;">Identify weights and centers of gravity of loads to be used</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting operations using the full capabilities of the loader crane</li><li fr-original-style="" style="box-sizing: border-box;">Position loads accurately at designated locations including onto and from the vehicle</li><li fr-original-style="" style="box-sizing: border-box;">Identify, fit and remove various attachments and lifting accessories as appropriate</li><li fr-original-style="" style="box-sizing: border-box;">Minimize load swing and ensure load security on the vehicle</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer's handbook and other sources of information, regulations and legislation applicable to the particular machine to be used
Be able to locate and identify the major components of the vehicle and loader crane and explain their functions
Be able to locate and identify all operating controls and explain their functions
Conduct all pre-operational checks in accordance with the manufacturer's and legislative requirements
Configure the vehicle and loader crane ready for travel
Configure the machine for travel and maneuver it safely across varying terrain in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting duties
Correctly deploy the stabilizers according to stated manufacturer's specifications
Comply with all requirements for rated capacity indicators or load moment indicators
Identify weights and centers of gravity of loads to be used
Carry out lifting operations using the full capabilities of the loader crane
Position loads accurately at designated locations including onto and from the vehicle
Identify, fit and remove various attachments and lifting accessories as appropriate
Minimize load swing and ensure load security on the vehicle
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Lorry Loader (N107)

Course information&nbsp;It is envisaged that by the end of this course of training, the learner will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for plant mover use.</li><li fr-original-style="" style="box-sizing: border-box;">Prepare machinery for use and operate machinery safely and efficiently.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area.</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations.</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of machinery attachments.</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test.__________________________________________________________________________________CertificationNPORS Traditional card &ndash; With the traditional card, there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card, the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training, the learner will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used.
Be able to locate and identify the major components of the machine and explain their functions.
Be able to locate and identify key controls and explain their functions.
Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.
Identify and maintain PPE appropriate for plant mover use.
Prepare machinery for use and operate machinery safely and efficiently.
Conduct all necessary safety checks at the work area.
Environmental considerations.
Storage and transport of machinery attachments.
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test.
__________________________________________________________________________________
Certification
NPORS Traditional card – With the traditional card, there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card, the candidate will be required to complete an NVQ in the specific item of plant. 

NPORS Plant Mover - Non Operational Duties (N132)

<h3 style="color: rgb(68, 68, 68); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(68, 68, 68);">Overview</h3>This course is designed to provide delegates with awareness in the Control of Substances Hazardous to Health (COSHH) and how it may affect them, their colleagues, and their employer.Under the COSHH Regulations, employers must provide sufficient information, instruction, and training so that employees are fully aware of the risks to health from exposure and the precautions they need to take.If you are an employer, self-employed or in control of work premises you will have duties under RIDDOR.Reporting accidents at work and ill health at work is a legal requirement.This course includes the Health and Safety Legislation and associated guidance from the Health and Safety Executive (HSE).<h2 style="color: rgb(68, 68, 68); box-sizing: border-box;" fr-original-style=" color: rgb(68, 68, 68);">Details</h2><h3 style="color: rgb(68, 68, 68); box-sizing: border-box;" fr-original-style=" color: rgb(68, 68, 68);">What will I learn on this course?</h3><ul style="color: rgb(68, 68, 68); box-sizing: border-box;" fr-original-style=" color: rgb(68, 68, 68);"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of the regulations and an understanding of duties and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Understand their roles under the legislation</li><li fr-original-style="" style="box-sizing: border-box;">Have increased awareness of the health and safety issues associated with using and handling hazardous substances and their effects on health</li><li fr-original-style="" style="box-sizing: border-box;">Possess skills on safe handling of substances</li><li fr-original-style="" style="box-sizing: border-box;">Have an understanding of suitable control measures to reduce the risks</li><li fr-original-style="" style="box-sizing: border-box;">Be knowledgeable of how to manage an incident</li><li fr-original-style="" style="box-sizing: border-box;">Understand a step-by-step approach to be used for a COSHH assessment</li></ul><h3 style="color: rgb(68, 68, 68); box-sizing: border-box;" fr-original-style=" color: rgb(68, 68, 68);">Certification</h3>Successful candidates will receive certification of achievement.

Overview
This course is designed to provide delegates with awareness in the Control of Substances Hazardous to Health (COSHH) and how it may affect them, their colleagues, and their employer.
Under the COSHH Regulations, employers must provide sufficient information, instruction, and training so that employees are fully aware of the risks to health from exposure and the precautions they need to take.
If you are an employer, self-employed or in control of work premises you will have duties under RIDDOR.
Reporting accidents at work and ill health at work is a legal requirement.
This course includes the Health and Safety Legislation and associated guidance from the Health and Safety Executive (HSE).
Details
What will I learn on this course?
Have an awareness of the regulations and an understanding of duties and legislation
Understand their roles under the legislation
Have increased awareness of the health and safety issues associated with using and handling hazardous substances and their effects on health
Possess skills on safe handling of substances
Have an understanding of suitable control measures to reduce the risks
Be knowledgeable of how to manage an incident
Understand a step-by-step approach to be used for a COSHH assessment
Certification
Successful candidates will receive certification of achievement.

Prima Cura Training

Health & Safety

Health & Safety At Work

COSHH (Control of Substances Hazardous to Health)

This course is designed to provide delegates with awareness in the Control of Substances Hazardous to Health (COSHH) and how it may affect them, their colleagues, and their employer.

COSHH & RIDDOR

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N204 Forward Tipping DumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping dumper use ➢ Prepare the forward tipping dumper for use and operate safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Attach and set trailers, ready for operation ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N204 Forward Tipping Dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping dumper use
➢ Prepare the forward tipping dumper for use and operate safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Attach and set trailers, ready for operation
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Dumper (N204)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N139 Forward tipping mini dumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping mini dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently ➢ Attachments set correctly ready for operation ➢ Environmental considerations ➢ Storage and transport of forward tipping mini dumper / implements / attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N139 Forward tipping mini dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping mini dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently
➢ Attachments set correctly ready for operation
➢ Environmental considerations
➢ Storage and transport of forward tipping mini dumper / implements / attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Mini Dumper (N139)

Chelmsford

Stratford

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site.
Aims
To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety.
Course Content
• Accident prevention
• Health & Safety law
• Control and management of the site and your how your role fits in with this
• Risk assessments and method statements
• Performing safely on site
• Reporting unsafe acts to prevent an accident
• Individual & employee responsibilities
• What to do if you think anyone’s Health and Safety is being put at risk
Assessment
At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them.
Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements.
To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set.
Instructions
Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Health & Safety Awareness (for Green CSCS)

General Admission

At HFX Training, we are passionate about business simulations because they bring learning to life through hands-on experience. This Level 1 Certification Program is the first step in our Instructor Training Certification Pathway, equipping you to confidently use the Healthcare Hero simulation in your teaching environment.

In this program, you will experience the simulation as a student, navigating its complexities and dynamics. Upon successfully completing Level 1, you’ll be ready to advance to Level 2 Training, where you will deepen your expertise in simulation facilitation and administration.

The program is cohort-based, and the timetable is coordinated in advance through discussions with the HFX team to ensure maximum participation. For more information on the program structure, instructional materials, and certification requirements, please read on.

What to Expect:
The Healthcare Hero simulation places you in charge of a fictional hospital. Over eight simulation rounds - each representing one quarter of business operations - you will make strategic decisions to optimize patient care while managing staffing, capacity, quality, and finances.
Throughout the simulation, you’ll navigate challenges like healthcare and economic crises, all while balancing the needs of multiple stakeholders. Your ultimate goal is to outperform competing hospitals managed by other participants in the program.

Program and Certification Requirements

This program equips you to confidently lead the simulation by requiring more than attendance or participation. To earn certification, you must:

Thoroughly Prepare: Review all instructional materials and the scenario manual before the course begins.
Fully Participate: Attend all Zoom sessions and complete each simulation round with focus and effort.
Demonstrate Mastery: Show a comprehensive understanding of the simulation’s dynamics, decision-making processes, and strategies during practice and live rounds.
Engage in Reflection: Actively participate in debrief sessions, assess your performance, and identify strategies for improvement.

This certification ensures you are equipped to facilitate this complex simulation with confidence. Auditing the course is an option, but participants who choose to audit will not receive certification.


Program Format

The program is delivered intensively over one or more Zoom sessions, totaling six hours. This compressed format demands your full attention and focus to successfully navigate the simulation’s complexities.

Eligibility Requirements:
By registering for this training program, you acknowledge the following:

You have discussed your needs with the HFX team and confirmed that the simulation aligns with your class or program objectives.
You are an instructor at an academic institution.
You agree to the confidentiality terms and commit not to distribute, disclose, or replicate any program content for purposes outside of this training.

This program is offered in goodwill to academic instructors as a resource to enhance their teaching. As part of this agreement, you understand that all materials, including the simulation itself, are proprietary to HFX and its partners. Any use of these materials for purposes beyond this program, such as developing similar tools or simulations, is strictly prohibited.


Course Structure:

After registering, you will gain immediate access to the simulation’s instructional materials. This includes:
The Scenario Manual: Your guide to understanding the game.
The Capacity Planner Worksheet and Financial Planning Worksheet: Tools to help you strategize.
The Strategy Planning Exercise: Designed to align your decisions with overall objectives.
The Portal Guide: A walkthrough of the simulation platform.
The program unfolds in four key phases:


Phase 1: Pre Zoom Call / Study / Set Up

Register using the button at the bottom of this page.
Review the instructional materials thoroughly.
Once the cohort is finalized, you will be sent your login credentials for the simulation itself.
Try to submit decisions for the first practice round using the simulation portal at www.simulationportal.com.


Phase 2: Play

We run two practice rounds over the first 2 hours of the zoom call. This allows you to familiarize yourself with the platform and decision-making process, and think through what your strategy might be in the live game.
The simulation resets ("zeroed") after the practice rounds.
A brief session will clarify lessons learned and expectations for the live rounds.
Over eight rounds, you’ll compete against other participants while refining your strategic decisions.


Phase 3: Feedback

Reflect on your performance during a structured debrief, including:
Strengths and areas for improvement.
Insights into competitors’ strategies.
Strategic lessons learned, and applicability to local healthcare organizations.


Phase 4: Implementation Planning

Work with the HFX team to plan your first application of the simulation in a teaching environment.






Certification Outcome

Upon completing this program, you will earn the HFX Instructor Training Certification: Level One, signifying your expertise in conducting impactful simulation-based training using Healthcare Hero.


HFX Training

Healthcare Hero Instructor Training Certification: Level 1

Bournemouth

Our Virtual (via Zoom) course provide the same high-quality tuition as our classroom-based sessions. Quarterly meetings will take place at the Academy



Dental Nursing Diploma with National Examining Board for Dental Nurses (NEBDN) is an internationally recognised qualification that will allow you to work as a Dental Nurse in hospitals, NHS and private dental practices.

Successful completion of Dental Nursing Diploma course will enable you to register as a Dental Care Professional with the General Dental Council (GDC) and practice as a qualified Dental Nurse.


Discover the exciting world of dental nursing and be a part of a growing field that offers endless opportunities for growth and development.
How will you learn?
In addition to our traditional class-based tuition, we also offer Virtual (via Zoom) Learning courses to cater to different learning preferences. Our Virtual Learning courses provide the same high-quality tuition as our classroom-based sessions. To participate, you will need a laptop, PC, smart phone or tablet with a built-in or external camera and microphone. From the comfort of your own home, you will have the opportunity to communicate with your tutor and classmates through video chat, using your phone or computer camera. This allows for seamless interaction, discussions, and collaborative learning.

Quarterly meetings at the Academy
To ensure a well-rounded learning experience, you will be required to attend face-to-face lessons at the Academy on a quarterly basis, which means every three months. These sessions serve several important purposes:

Practical Units: Some aspects of the course require hands-on practical training. The face-to-face lessons will cover these practical units, allowing you to gain valuable experience and apply the knowledge you have acquired during the virtual learning sessions.

Tests and Mock Exams: These assessments are important for evaluating your progress, identifying areas for improvement, and preparing you for the final exams. The Academy will provide a controlled and supervised environment to ensure the integrity and fairness of these assessments.
Attending quarterly face-to-face lessons provides a balanced approach to your learning journey. It combines the convenience and flexibility of virtual learning with the benefits of in-person interactions, practical training, and assessments. By participating in these sessions, you will have the opportunity to reinforce your knowledge, receive personalized feedback, and build a stronger connection with your tutor and classmates.
The Academy is dedicated to supporting your growth and success in dental nursing field, and the face-to-face lessons are an integral part of that commitment.



Being a Dental Nurse can be an exciting and fulfilling career that allows you to make a positive impact on people’s lives while enjoying a variety of work and opportunities to learn and grow. You’ll get to work with an amazing dental team and get to know patients, helping them to feel at ease and comfortable during their visit. You’ll be the one behind the scene making sure everything runs smoothly, and you’ll be the one that patients will turn to for assistance. You’ll also get to be a part of the latest advancements in dental technology and treatment. And on top of all that, you get to have a flexible schedule and a good earning potential, with the potential to advance in your career. All in all, being a dental nurse is one of the most exciting and fulfilling career that you can have, and you’ll get to leave work every day knowing you’ve made a real difference in the lives of others.


The course is delivered by Team of Dental Professionals who are examiners, dentists and experienced Dental tutors with years of experience in teaching Dentistry.
Dental Nurses are involved in a wide range of procedures, from routine check-ups to complex surgeries, which can make the job interesting and varied.

Patient-centered care: Dental Nurses have a direct impact on the patient’s experience and can make a positive difference in people’s lives by providing them with quality care.

Professional development: Dental Nurses have the opportunity to continue their education and expand their skills, leading to advancement and new opportunities in the field.
No previous experience required – we will teach you from A to Z.
Do you need a job?
Yes, you will have 3 months’ time from the start of your course to find a placement.
The Academy provides a list of Private and NHS Dental Surgeries, who are regularly contacting us when looking for more Trainee Dental Nurses, so you can contact them directly as a registered student at the Academy. This is a paid job, unless you would like to work voluntary for personal reasons. We also provide a reference letter to the employee in case you need it.
The course is ideal for you if:
You are looking for a qualification that leads to employment
You intend to participate within dentistry and make a positive contribution to the dental health
You wish to learn how to maintain high standards of hygiene, cleanliness, health & safety
You enjoy interacting with multidisciplinary team and different people


The curriculum is based on the GDC (General Dental Council) registration requirements for dental nurses. It sets out the knowledge, skills and behavioural requirements that should be developed and demonstrated. These are set out in terms of professional competencies, with the assessment method clearly outlined (e.g. how the skills and knowledge will be assessed in the final examinations – via written questions such as multiple choice (MCQ) or extended matching questions (EMQ) or via Objective Structured Clinical Examinations – OSCEs). We are proud to announce that our Dental Nursing students has the highest examination pass rate in OSCE examinations!
Free services– workshops, mock exams, eRoE marking and internal moderation.


Earn while you learn could be another benefit for doing this course. We provide a list of Private Surgeries who have been working with us for the last 14 years and looking to recruit more Trainee Dental Nurses.
Working together – At our Dental Department, we prioritise working together with our learners every step of the way. We firmly believe in providing unwavering support, equipping you with the necessary tools, skills, and assistance to ensure your success. We take immense pride in the achievements of our students, with a long list of graduates boasting remarkable success stories. Our commitment to your success serves as the foundation for our own accomplishments
What Can You Expect to Earn as a Dental Nurse? Compared to other caring professions, Dental Nursing is well paid and offers plenty of opportunity for continued training and development. This is great for those looking on a the long-term plan for their career and those who wish to work their way up the ladder through continued learning, experience & hard work. Trainee Dental Nurse salary for standard working week will be around £23,000 per annum. Average wage for a qualified Dental Nurses between £40,417 to £42,350 p.a.
When are the exams?
There are two exams:
1. Multiple choice theory exam. November and March.
2. Practical exam. January and June. 
Record of Experience (eROE)
To be eligible to sit your first exam, you have to complete your electronic Record of Experience (eROE). The eROE has to be submitted to your tutor by 31st Jan for March exam, and 31st August for November exam. 
London Waterloo Academy supports Mouth Cancer Research Foundation and encouraging learners to raise the awareness and participate in annual 10k walk.



Study mode – virtual (via Zoom) live stream lessons combined with a quarterly meetings Saturday/Sunday at the Academy
Duration – 1 year (part time)
Virtual (via Zoom) classes – once a week
Quarterly meetings at the Academy – date are discussed with the group in advance
Next Intake/start dates (please choose one for your course to start):
21 September 2024, Saturday classes from 9am to 11am
Registration fee – £300 (includes: administration, workshops, mock exams, RoE marking, internal moderation of RoE)
Tuition Fees – £1,400 (we offer payment plan, and accept instalments)
Exam fee – £510 will be charged at the point of candidate registration with NEBDN
One day introduction course – for those who are considering/not sure whether to step up into the Dental Industry £50.00
Call us +44 (0) 7484 014980 or email to info@waterlooacademy.co.uk or Facebook – London Waterloo Academy
Office location: The Foundry, 156 Blackfriars Rd, London SE1 8EN (Southwark Station (2-3 min walk) and Waterloo/Blackfriars Station (10 min walk))

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Southampton

Portsmouth

Rotherham

Manchester

Leeds

Bingley

Kingston upon Hull

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Luton

Hull

Northampton

Berkshire

Bedford

Liverpool 

Swansea

Essex

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

Droitwich Spa

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course

Broxburn

C20M01 - Intruder &amp; Hold up Alarm Systems Foundation EN50131Course contentLearners will be introduced to the design, installation, commissioning, and maintenance of intruder and hold-up alarm systems. This CPD provides a foundation knowledge of I&amp;HAS in relation to the requirements of EN 50131, PD 6662, BS 8243, BS 9623, associated standards, and the various legal frameworks within the UK.Who should attend?All those involved in the specifying, design, installation, commissioning, and maintenance of I&amp;HAS including specifiers, property managers, consultants, FM providers, security consultants, and security installers.Content<ul style="color: rgb(63, 77, 90); box-sizing: border-box;" fr-original-style=" color: rgb(63, 77, 90);"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Applicable standards<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Security risk assessment</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Grading</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Level of supervision</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Notification options</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Environmental classification</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Police response</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Design</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Installation &amp; commissioning</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Maintenance</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Standby battery calculation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Documentation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Assessment<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/5293624b-3258-4be0-b61f-1d0469f76c49/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"></li></ul>

C20M01 - Intruder & Hold up Alarm Systems Foundation EN50131
Course content
Learners will be introduced to the design, installation, commissioning, and maintenance of intruder and hold-up alarm systems. This CPD provides a foundation knowledge of I&HAS in relation to the requirements of EN 50131, PD 6662, BS 8243, BS 9623, associated standards, and the various legal frameworks within the UK.
Who should attend?
All those involved in the specifying, design, installation, commissioning, and maintenance of I&HAS including specifiers, property managers, consultants, FM providers, security consultants, and security installers.
Content
Applicable standards
Security risk assessment
Grading
Level of supervision
Notification options
Environmental classification
Police response
Design
Installation & commissioning
Maintenance
Standby battery calculation
Documentation



Ember Compliance

Professional Development

Engineer

Continuous Professional Development (CPD)

Learners will be introduced to the design, installation, commissioning, and maintenance of intruder and hold-up alarm systems. 

C20M01 - Intruder & Hold up alarm foundation EN50131 (online)

<p id="isPasted" style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">LOOKING FOR: MG, YA, ADULT FICTION, NON-FICTIONTh&eacute;r&egrave;se is a Literary and Rights Agent at Susanna Lea Associates, @SLALondon. Born and raised in Belgium, on a diet of frites and Tintin she moved to England in her late teens with her family, then stayed in London to do a History degree and Masters at University College London. Having been brought up bilingual, translation rights seemed like her logical next step. She started off in the rights department at Bloomsbury Publishing, before hopping across the square to Ed Victor&rsquo;s agency, and found experiencing both the publishing and agency side of publishing incredibly valuable.She has been building her own list of authors alongside selling translation rights since early 2016, which she has hugely enjoyed; working with authors right from the book&rsquo;s conception, while also experiencing the thrill of selling her own authors&rsquo; works in the UK and US as well as in translation to publishers across the globe.In terms of adult fiction, Th&eacute;r&egrave;se has a huge soft spot for historical fiction, having read Early Modern History at university, but is also very much on the hunt for crime/thrillers, bookclub, high-concept love stories and literary fiction. She loves strong female characters, in particular when they go through an evolution or journey as the story progresses and gradually find that inner strength.On the children&rsquo;s fiction front, Th&eacute;r&egrave;se is all about finding a fresh, new voice. She loves all things funny, fantasy and adventure &ndash; across lands, time and space, and involving strong friendships and strong lead characters - and wants to be transported straight away when reading a manuscript. She likes very vivid, well-crafted and imaginative worlds, such as stories set in a toy factory or in an underwater world. Th&eacute;r&egrave;se would love some more adventures set in space, mysteries, quirky characters, explorers and imaginary friends.And last, but not least, in non-fiction, history features heavily in her interests, but Th&eacute;r&egrave;se would also love to see books about big ideas, culture, sociology, science, anthropology and memoir. Anything that helps expand the mind and questions or informs the way in which we view ourselves, the world and how we fit into it, all written in an engaging and accessible manner.Th&eacute;r&egrave;se would like you to submit a covering letter, 1 page synopsis and the first three chapters or 5,000 words of your manuscript in a single word document.<p style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" id="isPasted" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">(In addition to the paid sessions, Th&eacute;r&egrave;se is kindly offering one free session for low income/under-represented writers. Please email <a href="mailto:agent121@iaminprint.co.uk" style="box-sizing: border-box; text-decoration: inherit; cursor: pointer; user-select: auto; font-size: var(--font-size);" fr-original-style="box-sizing: border-box; text-decoration: inherit; cursor: pointer; user-select: auto;">agent121@iaminprint.co.uk</a> to apply, outlining your case for this option which is offered at the&nbsp;discretion of&nbsp;I Am In Print).&nbsp;By booking you understand you need to conduct an internet connection test with&nbsp;I Am In Print prior to the event. You also agree to email your material in one document to reach I Am In Print by the stated submission deadline and note that I Am In Print take no responsibility for the advice received during your agent meeting.<p style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">The submission deadline is: Tuesday 27 August 2024

LOOKING FOR: MG, YA, ADULT FICTION, NON-FICTION

Una is a Rights Agent at Susanna Lea Associates and am starting to build a client list. 

She grew up in London and graduated from the University of Cambridge with a BA in English in 2021. At university, Una was particularly interested in contemporary West African and South Asian literature. She started as an agent's assistant at SLA London in 2022 and now handles some translation rights and provides support with editorial work and submissions.

Una's favourite reads always set her at ease right away and draws her in with impressive and accessible storytelling, memorable characters or an original hook. Una enjoys writing which expands her worldview, makes her laugh out loud or keeps her on her toes with its twists and turns. She welcomes submissions from debut authors and would be keen to read across a wide range of genres and styles.

She is looking for literary, upmarket and book club fiction, and is always drawn to stories that explores the challenges and complexities of love and relationships in all its forms —within families, between friends or in romantic relationships. Una loves the way in which familial relationships are dissected in The Wren, The Wren by Anne Enright and the impact of the local community in Small Worlds by Caleb Azumah Nelson. She is always drawn to novels with a strong sense of community, whether they are unified by geography, culture, or in other unexpected ways.

Una has always loved reading international and translated fiction and welcomes submissions from authors writing contemporary fiction that engages with cultures and traditions from around the world, such as in voices of the deities in Freshwater by Akwaeke Emezi or the subversive tales of Sayaka Murata. 

She is not looking for children’s or YA titles, science fiction or high-concept fantasy, but is open to submissions from authors writing in the speculative fiction space, and books with fantastical or otherworldly elements, be that magical realism or supernatural horror, such as Mona Awad's campus novel with a twist, Bunny. Una would also love to read more writing that engages with the natural world and reminds us of the limitations of human understanding.

In non-fiction, Una enjoys books that furthers her understanding of wider societal issues — nature and the environment, culture, and little-known history. Her recent non-fiction favourites are Eve by Cat Bohannon, Doppelgänger by Naomi Klein and Unearthed by Claire Ratinon.

Una would like you to submit a covering letter, 1 page synopsis and the first three chapters or 5,000 words of your manuscript in a single word document.

(In addition to the paid sessions, Una is kindly offering one free session for low income/under-represented writers. Please email agent121@iaminprint.co.uk to apply, outlining your case for this option which is offered at the discretion of I Am In Print). 

By booking you understand you need to conduct an internet connection test with I Am In Print prior to the event. You also agree to email your material in one document to reach I Am In Print by the stated submission deadline and note that I Am In Print take no responsibility for the advice received during your agent meeting.

The submission deadline is: Monday 7th April 2025

I Am In Print

Fiction Writing

BOOKINGS CLOSED! 14th April Una McKeown #Agent121. Looking for: ADULT FICTION, NON-FICTION

If you assess students in the workplace against industry or occupational standards, this is the industry standard qualification that you must hold. You must be able to work with 2 learners in the workplaces to demonstrate your assessing skills.
Further Information
The course is delivered split into 3 parts:
4 half day workshops delivered via Zoom
The completion of 3 assignments.
Carrying out assessment activity in the workplace
Benefits
By attending this course, you will be able to:
Understand the role of an assessor and the principles and practices of assessment
Plan assessments in the workplace with at least two learners
Use different assessment methods, make assessment decisions and give feedback to learners
Involve learners and others in the assessment process – ensuring decisions are countersigned, quality assured and that assessment practice is standardised
Apply legal and regulatory requirements to your assessment


651 Environment courses in Macclesfield

NPORS Crawler Crane (N103)

By Dynamic Training and Assessments Ltd

NPORS Appointed Person (N401)

By Dynamic Training and Assessments Ltd

NPORS Rough Terrain Lift Truck (N009)

By Dynamic Training and Assessments Ltd

NPORS Side Loader (N006)

By Dynamic Training and Assessments Ltd

NPORS Industrial Telescopic Handler (N010A)

By Dynamic Training and Assessments Ltd

NPORS Lorry Loader (N107)

By Dynamic Training and Assessments Ltd

NPORS Plant Mover - Non Operational Duties (N132)

By Dynamic Training and Assessments Ltd

COSHH & RIDDOR

By Prima Cura Training

NPORS Forward Tipping Dumper (N204)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Mini Dumper (N139)

By Dynamic Training and Assessments Ltd

Search By Location