Nottinghamshire

COURSE INFORMATIONThe novice course is split into 4 days of training and one day of testing.&nbsp;By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.Days 1-4:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">Explanation of qualifications</li><li fr-original-style="" style="box-sizing: border-box;">Legislation controlling crane operations</li><li fr-original-style="" style="box-sizing: border-box;">BS 7121 Explanation</li><li fr-original-style="" style="box-sizing: border-box;">LOLER regulations in detail</li><li fr-original-style="" style="box-sizing: border-box;">Crane appreciation</li><li fr-original-style="" style="box-sizing: border-box;">Crane stability</li><li fr-original-style="" style="box-sizing: border-box;">Accessories</li><li fr-original-style="" style="box-sizing: border-box;">Safe slinging</li><li fr-original-style="" style="box-sizing: border-box;">Mobile crane selection</li><li fr-original-style="" style="box-sizing: border-box;">Risk assessment and method statement</li><li fr-original-style="" style="box-sizing: border-box;">Supervise a lift scenario</li><li fr-original-style="" style="box-sizing: border-box;">Practical induction</li><li fr-original-style="" style="box-sizing: border-box;">Case studies lift plan exercise</li><li fr-original-style="" style="box-sizing: border-box;">Procedures for planning lifts</li></ul>Day 5:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">NPORS Theory Test</li><li fr-original-style="" style="box-sizing: border-box;">NPORS Practical Assessment</li><li fr-original-style="" style="box-sizing: border-box;">RAMS and Lift Plan Exercise</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.Good understanding of spoken and written English.

COURSE INFORMATION
The novice course is split into 4 days of training and one day of testing. 
By the end of the course delegates will have the knowledge to be able to design safe lifting plans that are compliant with the law, and take into account all health and safety requirements on site.
Days 1-4:
Introduction
Explanation of qualifications
Legislation controlling crane operations
BS 7121 Explanation
LOLER regulations in detail
Crane appreciation
Crane stability
Accessories
Safe slinging
Mobile crane selection
Risk assessment and method statement
Supervise a lift scenario
Practical induction
Case studies lift plan exercise
Procedures for planning lifts
Day 5:
NPORS Theory Test
NPORS Practical Assessment
RAMS and Lift Plan Exercise
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.
Good understanding of spoken and written English.

Dynamic Training and Assessments Ltd

Construction

NPORS

NPORS Appointed Person (N401)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operator Piling rigs to form and construct piles.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of piling rig relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for piling rig use</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the piling rig for use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 10 Days depending on experienceExperienced worker tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operator Piling rigs to form and construct piles.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Select suitable type of piling rig relative to the work being undertaken
Identify and maintain PPE appropriate for piling rig use
Prepare the piling rig for use
Conduct all necessary safety checks at the work area
Operate machinery safely and efficiently
Understand environmental considerations
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending on experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

CSCS (Construction Skills Certification Scheme)

NPORS Piling Rig (N221)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for dozer use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the dozer for use, operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Attach and set trailed, mounted attachments ready for work</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of implements and attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Location</h2></div>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Identify and maintain PPE appropriate for dozer use
Conduct all necessary safety checks at the work area
Prepare the dozer for use, operate machinery safely and efficiently
Attach and set trailed, mounted attachments ready for work
Understand environmental considerations
Storage and transport of implements and attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Dozer (N215)

 London

<div style="color: rgb(102, 109, 112); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(102, 109, 112);"><div style="color: rgb(102, 109, 112); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(102, 109, 112);">This is the Alan d signature course. This Intermediate Hairdressing Course is aimed at hairdressers returning to the industry or experienced stylists who feel &lsquo;bogged down&rsquo; with their everyday routine. It aims to help you polish up your skills and give some much needed inspiration. It&rsquo;s also ideal for newly qualified hairdressers that don&rsquo;t feel confident on the salon floor. Choose training on cutting, styling &amp;/or colouring.Courses begin weekly throughout the year.The Alan d Hairdresser Refresher certification is awarded on completion of the course.This course can be taken at both our London and Ipswich Hairdressing Schools.</div><div style="color: var(--color-content-border); box-sizing: border-box;" fr-original-style=" color: var(--color-content-border);"> </div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"><h3 style="color: var(--color-content-heading); box-sizing: border-box;" fr-original-style=" color: var(--color-content-heading);">Course Price:</h3>&pound;990 inc VAT</div><div style="color: var(--color-content-border); box-sizing: border-box;" fr-original-style=" color: var(--color-content-border);"> </div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"><h3 style="color: var(--color-content-heading); box-sizing: border-box;" fr-original-style=" color: var(--color-content-heading);">Intermediate Hairdressing Course Dates</h3>Weekly on request</div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"> </div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"><h3 style="color: var(--color-content-heading); box-sizing: border-box;" fr-original-style=" color: var(--color-content-heading);">Our Hairdressing Academies</h3>Our Refresher/Confidence Builder Course can be taken at both our London and Ipswich Hairdressing Schools.Situated in the heart of London, our Hairdressing School in Barbican, adjacent to Farringdon Elizabeth Line, Barbican exit, is the ideal place for newly qualified Hairdressers to build their confidence on the salon floor or experienced stylists looking for inspiration. Learn in a realistic salon environment, with training from some of the best Hairdressing trainers in the industry.Our Ipswich Hairdressing School also provides a realistic working environment and is ideal for newly qualified Hairdressers &amp; experienced Stylists in East Anglia looking to improve their confidence and skillset. As Suffolk&rsquo;s leading Hairdressing and Barbering School, expect to use only salon quality products, styling and cutting tools during your training.<a href="https://aland.co.uk/london-hair-dressing-and-barbering-training-centre/" style="color: rgb(255, 255, 255) !important; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(255, 255, 255) !important;">VIEW OUR LONDON ACADEMY</a><a href="https://aland.co.uk/ipswich-hair-dressing-and-barbering-training-centre/" style="color: rgb(255, 255, 255) !important; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(255, 255, 255) !important;">VIEW OUR IPSWICH ACADEMY</a></div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"> </div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"><h3 style="color: var(--color-content-heading); box-sizing: border-box;" fr-original-style=" color: var(--color-content-heading);">FAQs</h3>How much Hairdressing experience do I need to take your Hairdressing Refresher/Confidence Builder Course? This&nbsp;<a href="https://aland.co.uk/intermediate-hairdressing-courses/" style="color: var(--color-content-link); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--color-content-link);">Intermediate Course</a>&nbsp;is ideal for hairdressers returning to the industry who would like to brush up on their skills and learn the latest techniques. It&rsquo;s also ideal for experienced hairstylists looking for inspiration or newly qualified hairdressers who want to build their confidence. Spoken English is essential.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">What type of training can I expect on the Hairdressing Refresher/Confidence Builder Course? This course is mostly practical with some relevant theory. Expect to cut, colour and style hair on both dummy heads and live models.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Is the Alan d Refresher Course certification industry recognised? Yes, all Alan d certificates are industry recognised and are a great addition to your CV.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Do you have a more bespoke Hairdressing Course? Our&nbsp;<a href="https://aland.co.uk/hairdressing-bootcamp/" style="color: var(--color-content-link); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--color-content-link);">#ONTHEFLOOR</a>&nbsp;course is our bespoke Hairdressing Bootcamp Course where you decide what you learn. Aimed at newly qualified or experienced Hairdressers, this course allows you to brush up on specific skills.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Do you have any Advanced Hairdressing Courses I could take after this? We offer our a&nbsp;<a href="https://aland.co.uk/nvq-level-3-hairdressing-course/" style="color: var(--color-content-link); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--color-content-link);">Level 3 NVQ Diploma in Hairdressing Course</a>&nbsp;which is ideal for experienced hairstylists looking to expand their skillset.</div></div><div style="color: rgb(102, 109, 112); box-sizing: border-box;" fr-original-style=" color: rgb(102, 109, 112);"> </div>

This is the Alan d signature course. This Intermediate Hairdressing Course is aimed at hairdressers returning to the industry or experienced stylists who feel ‘bogged down’ with their everyday routine. It aims to help you polish up your skills and give some much needed inspiration. It’s also ideal for newly qualified hairdressers that don’t feel confident on the salon floor. Choose training on cutting, styling &/or colouring.
Courses begin weekly throughout the year.
The Alan d Hairdresser Refresher certification is awarded on completion of the course.
This course can be taken at both our London and Ipswich Hairdressing Schools.
Course Price:
£990 inc VAT
Intermediate Hairdressing Course Dates
Weekly on request
Our Hairdressing Academies
Our Refresher/Confidence Builder Course can be taken at both our London and Ipswich Hairdressing Schools.
Situated in the heart of London, our Hairdressing School in Barbican, adjacent to Farringdon Elizabeth Line, Barbican exit, is the ideal place for newly qualified Hairdressers to build their confidence on the salon floor or experienced stylists looking for inspiration. Learn in a realistic salon environment, with training from some of the best Hairdressing trainers in the industry.
Our Ipswich Hairdressing School also provides a realistic working environment and is ideal for newly qualified Hairdressers & experienced Stylists in East Anglia looking to improve their confidence and skillset. As Suffolk’s leading Hairdressing and Barbering School, expect to use only salon quality products, styling and cutting tools during your training.
VIEW OUR LONDON ACADEMYVIEW OUR IPSWICH ACADEMY
FAQs
How much Hairdressing experience do I need to take your Hairdressing Refresher/Confidence Builder Course?
This Intermediate Course is ideal for hairdressers returning to the industry who would like to brush up on their skills and learn the latest techniques. It’s also ideal for experienced hairstylists looking for inspiration or newly qualified hairdressers who want to build their confidence. Spoken English is essential.



What type of training can I expect on the Hairdressing Refresher/Confidence Builder Course?
This course is mostly practical with some relevant theory. Expect to cut, colour and style hair on both dummy heads and live models.



Is the Alan d Refresher Course certification industry recognised?
Yes, all Alan d certificates are industry recognised and are a great addition to your CV.



Do you have a more bespoke Hairdressing Course?
Our #ONTHEFLOOR course is our bespoke Hairdressing Bootcamp Course where you decide what you learn. Aimed at newly qualified or experienced Hairdressers, this course allows you to brush up on specific skills.



Do you have any Advanced Hairdressing Courses I could take after this?
We offer our a Level 3 NVQ Diploma in Hairdressing Course which is ideal for experienced hairstylists looking to expand their skillset.

Alan d Hairdressing Education

Beauty Therapist

Hairdressing

Trainers Course

Hair Stylist

Choose what you want to learn in this fast-track hairdressing course. Aimed at those who’ve left college with a hairdressing qualification but don’t feel confident enough on the salon floor or those needing to brush up on a specific skill. Our training concentrates on cutting, colouring, styling and barbering.

The Refresher/Confidence Builder

1 Day

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">The NPORS&nbsp;Shunter Vehicle&nbsp;course is for drivers who do not hold an HGV licence but are required to &#39;shunt&#39; vehicles etc. around on company premises. Shunter training allows these drivers to drive maximum weight articulated and rigged vehicles on-site only around the business premises.We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).<h2 fr-original-style="" style="box-sizing: border-box;">NPORS Shunter Vehicle (N243) Course Content</h2>To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for Shunter Vehicle use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the Shunter Vehicle for use and operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Attach and set trailers ready for operation</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Transport and uncouple Shunter Vehicle attachments</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.&nbsp;Good understanding of spoken and written English.</div>

COURSE INFORMATION
The NPORS Shunter Vehicle course is for drivers who do not hold an HGV licence but are required to 'shunt' vehicles etc. around on company premises. Shunter training allows these drivers to drive maximum weight articulated and rigged vehicles on-site only around the business premises.
We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
NPORS Shunter Vehicle (N243) Course Content
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Identify and maintain PPE appropriate for Shunter Vehicle use
Conduct all necessary safety checks at the work area
Prepare the Shunter Vehicle for use and operate machinery safely and efficiently
Attach and set trailers ready for operation
Environmental considerations
Transport and uncouple Shunter Vehicle attachments
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application. 
Good understanding of spoken and written English.

NPORS Shunter Vehicle (N243)

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Rough Terrain Lift Truck (N009) 

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Side Loader (N006)

Course information Overview&nbsp;To provide knowledge and understanding in the following areas:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"> Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;"> Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Be able to identify the different types of pallet / stacker trucks</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Be able to locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Start and stop the machine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Configure the machine for travel and maneuver it safely laden and unladen, in open and &nbsp;confined areas</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Conduct all necessary safety checks at the work area&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Load and unload external transport safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Demonstrate knowledge and understanding of loading and unloading procedures for machine &nbsp;transportation&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Carry out all end of shift and shut down procedures</li></ul>&nbsp;Entry Requirements&nbsp;For learners that require the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English

Course information Overview
 To provide knowledge and understanding in the following areas: 
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to identify the different types of pallet / stacker trucks
Locate and identify the major components of the machine and explain their functions
Be able to locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the machine and safely move the machine off and stop it safely
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
 Entry Requirements 
For learners that require the 'HS&E TESTED Logo' displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English

NPORS Pallet - Stacker Truck (N008)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.&nbsp;This course can be completed by both novice and experienced candidates.Novice course- 1/2 DayExperienced worker tests- 1/2 day theory assessment.COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&#39;s handbook for the particular harness / fall arrest to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify major components of the harness / fall arrest and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all safety checks in accordance with the manufacturer&#39;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of harness / fall arrest relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use</li><li fr-original-style="" style="box-sizing: border-box;">Correctly fit and remove the safety harness / fall arrest</li><li fr-original-style="" style="box-sizing: border-box;">Carry out end of work inspections</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage of harness / fall arrest</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

Who Should Attend
This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.
 This course can be completed by both novice and experienced candidates.
Novice course- 1/2 Day
Experienced worker tests- 1/2 day theory assessment.
COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities
Have a working knowledge of the manufacturer's handbook for the particular harness / fall arrest to be used
Be able to locate and identify major components of the harness / fall arrest and explain their functions
Conduct all safety checks in accordance with the manufacturer's and legislative requirements
Select suitable type of harness / fall arrest relative to the work being undertaken
Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use
Correctly fit and remove the safety harness / fall arrest
Carry out end of work inspections
Environmental considerations
Storage of harness / fall arrest
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Harness and Fall Arrest (N723)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate horizontal directional drilling rigs in the workplace safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of horizontal directional drilling rig relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for horizontal directional drilling rig use</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the horizontal directional drilling rig for use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 5 DaysExperienced Worker Tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate horizontal directional drilling rigs in the workplace safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Select suitable type of horizontal directional drilling rig relative to the work being undertaken
Identify and maintain PPE appropriate for horizontal directional drilling rig use
Prepare the horizontal directional drilling rig for use
Conduct all necessary safety checks at the work area
Operate machinery safely and efficiently
Understand environmental considerations
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 5 Days
Experienced Worker Tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Horizontal Directional Drilling Rig (N130)

Chelmsford

Stratford

The Temporary Works Coordinator course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site.
Course Objectives:
By the end of the course, the delegate will gain knowledge of:
The need for a temporary works co-ordinator
The day-to-day roles of others involved in the temporary works procedures
Risk assessments and method statements
Best procedures as stated in BS 5975:2019
Course Content:
The content covered by the CITB course includes:
Various groups and types of Temporary Works
Case studies, procedures and policies of Temporary Works
BS5975:2019
CDM Regulations
Legislation and relevant Codes of Practice
Register for Temporary Works, design requirements and checks
Standard solutions and guidance design documents
Temporary works Co-ordinator – job role and responsibilities
Assessment:
To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training.
Certificate:
The certificate for this course is valid for 5 years.
Instructions
Please note all Temporary Works Coordinator courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Temporary Works Coordinator (TWC) - 2 Day Course

General Admission

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

The Temporary Works Supervisor course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site.
Course Objectives:
By the end of the course, the delegate will gain knowledge of:
Have gained an understanding of the importance of cooperation and teamwork on a temporary works site
Understand the legal duties of the role
Have a stronger awareness of risk management on-site as well as the roles of a supervisor and their fellow employees on site
Leave the course with an understanding of the “4C’s”, Communication, Cooperation, Coordination and Competency
Course Content:
Different groups and types of Temporary Works
BS5975:2019
CDM Regulations
Legislation and Codes of Practice
Temporary Works Register, Design Brief and Design
Case studies, policy and procedures, Standard solutions and permitted drawings
Risk assessments, method statements
Safe systems of work
The roles and duties of a Temporary Works Supervisor
Assessment:
To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training.
Certificate:
The certificate for this course is valid for 5 years.
Instructions
Please note all Temporary Works Supervisor courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Temporary Works Supervisor (TWS)

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site.
Aims
To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety.
Course Content
• Accident prevention
• Health & Safety law
• Control and management of the site and your how your role fits in with this
• Risk assessments and method statements
• Performing safely on site
• Reporting unsafe acts to prevent an accident
• Individual & employee responsibilities
• What to do if you think anyone’s Health and Safety is being put at risk
Assessment
At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them.
Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements.
To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set.
Instructions
Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Health & Safety Awareness (for Green CSCS)

We will review some familiar functions of the Old Testament in Spiritual Direction, and then move on to explore some different ways to make use of less familiar OT stories and poems. Our investigation will be a mix of input, conversation, and prayer … and have a Bible at hand!

Karen Eliasen was born in London of Danish parents who later emigrated to
Canada. After finishing Biblical studies in Canada, she taught English in Arctic
Greenland for several years. She has been on the Team at St Beuno’s Jesuit
Spirituality Centre since 2013.

Spiritual Direction Forum UK

Spiritual Direction

We will review some familiar functions of the Old Testament in Spiritual Direction, and then move on to explore some different ways to make use of less familiar OT stories and poems. Our investigation will be a mix of input, conversation, and prayer … and have a Bible at hand!

New Takes from the Old Testament for Spiritual Direction with Karen Eliason

Southampton

Portsmouth

Rotherham

Manchester

Leeds

Bingley

Kingston upon Hull

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Luton

Hull

Northampton

Berkshire

Bedford

Liverpool 

Swansea

Essex

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations.
The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme.
Prerequisites
SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Supervisor Training Scheme (SSSTS) Refresher

Droitwich Spa

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


246 English courses in Swanley

NPORS Appointed Person (N401)

By Dynamic Training and Assessments Ltd

NPORS Piling Rig (N221)

By Dynamic Training and Assessments Ltd

NPORS Dozer (N215)

By Dynamic Training and Assessments Ltd

The Refresher/Confidence Builder

By Alan d Hairdressing Education

NPORS Shunter Vehicle (N243)

By Dynamic Training and Assessments Ltd

NPORS Rough Terrain Lift Truck (N009)

By Dynamic Training and Assessments Ltd

NPORS Side Loader (N006)

By Dynamic Training and Assessments Ltd

NPORS Pallet - Stacker Truck (N008)

By Dynamic Training and Assessments Ltd

NPORS Harness and Fall Arrest (N723)

By Dynamic Training and Assessments Ltd

NPORS Horizontal Directional Drilling Rig (N130)

By Dynamic Training and Assessments Ltd

Search By Location