199 Electrotechnical courses

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.

The Gold Card Training Programme is the most comprehensive electrician course available. We offer weekday, weekend and evening delivery options. JIB ECS (Gold) Card is quickly becoming a necessity when seeking work on commercial sites, or sub-contracting to larger contractors.

Unlock the power of steam turbine technology with EnergyEdge's comprehensive classroom training. Gain expertise and optimize operations. Enroll now!

About this training course This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria. The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly. This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6. Training Objectives Steam Turbine Components and Systems: Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance: Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity. Steam Turbine Instrumentation and Control Systems: Learn about the latest instrumentation, control systems, and governing systems of steam turbines Steam Turbine Reliability and Maintainability: Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines Steam Turbine Selection and Applications: Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators: Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators Jacking Oil System and Turning Gear: Learn about the turbine jacking oil system and turning gear operation Turbine Supervisory System: Gain a thorough understanding of the turbine supervisory system Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants: Learn about steam turbine monitoring technology, validation, and verification tests for power plants Steam Turbine Codes: Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages) Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages) STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

In the dynamic realm of Electrical Engineering, a myriad of opportunities beckons. This ever-evolving field is pivotal to our modern world and the driving force behind groundbreaking innovations, offering unparalleled career prospects for aspiring engineers. With the rise of intelligent technologies and sustainable energy solutions, expertise in Electrical Engineering has become more vital than ever. For those eager to ride this wave and harness the potential within, our curated MATLAB Simulink for Electrical Engineering bundle is your gateway. It equips learners with the essential skills and knowledge, ensuring they're well-prepared to navigate and contribute to the bright future of Electrical Engineering. Dive in and embrace the exciting challenges and rewards that await. Learners can get theoretical knowledge and skills from these eight courses to succeed in this field. Embark on your Electrical Engineering journey today. Equip yourself with industry-leading knowledge and skills. Don't miss out - enrol now and power up your future The CPD Accredited Eight Courses Are: Course 1: MATLAB Simulink for Electrical Power Engineering. Course 2: Trigonometry for Electrical Engineering. Course 3: ETAP Power System Analysis For Electrical Engineers. Course 4: PLC Programming Using Logixpro Simulator. Course 5: Digital Electric Circuits & Intelligent Electrical Devices. Course 6: Power Electronics for Electrical Engineering Course 7: Electric Circuits for Electrical Engineering. Course 8: Electrical Machines for Electrical Engineering. Learning outcomes: By Completing this MATLAB Simulink for Electrical Engineering bundle, you will be able to: Gain expertise in Electrical Power Engineering simulations. Understand core maths essential for electrical systems with our Electrical Engineering bundle. Harness ETAP for efficient system analysis with our Electrical Engineering bundle. Master automation using Logixpro Simulator. Grasp digital circuits and intelligent device applications. Delve into the design and operations of core electrical machinery. MATLAB Simulink for Electrical Power Engineering: Delve into the heart of Electrical Power Engineering simulations. This course offers theoretical knowledge with MATLAB Simulink, enabling learners to model, analyse, and design electrical systems, making it an indispensable tool for every Electrical Engineer. Trigonometry for Electrical Engineering: This specialised module demystifies the crucial mathematical principles behind electrical systems. Gain an in-depth understanding of trigonometric concepts tailored to solve real-world Electrical Engineering challenges. ETAP Power System Analysis For Electrical Engineers: Equip yourself with the mastery of ETAP, the leading power system modelling and analysis software. Dive into detailed load flow studies, fault calculations, and stability analysis, ensuring efficient system design and operations. PLC Programming Using Logixpro Simulator: Step into the world of automation with a keen focus on PLC programming. Harness the Logixpro Simulator to design, test, and optimise automated systems, which is pivotal for modern Electrical Engineering projects. Digital Electric Circuits & Intelligent Electrical Devices: Navigate the digital transformation in Electrical Engineering. Understand the principles behind digital circuitry, and explore the frontier of intelligent devices shaping the future of Electrical Engineering. Power Electronics for Electrical Engineering: Delve into the dynamic realm of power electronics. Grasp the design, analysis, and application of electronic circuits used to control and convert electric power, solidifying your expertise in this vital Electrical Engineering domain. Electric Circuits for Electrical Engineering: Build a robust foundation with this comprehensive guide to electric circuits. From basic principles to advanced circuit analysis, this course ensures you're well-prepared to design and troubleshoot in any Electrical Engineering scenario. Electrical Machines for Electrical Engineering: Embark on a journey through the core of Electrical Engineering machinery. Dive deep into the design, operation, and application of transformers, motors, and generators, ensuring a well-rounded understanding of the machines that power our world. Show off your new skills with a certificate of completion. After successfully completing the course, you can order your CPD Accredited Certificates as proof of your achievement. Please Note: The delivery charge inside the U.K. is £4.99, and international students have to pay £8.99. CPD 90 CPD hours / points Accredited by CPD Quality Standards Who is this course for? The target audience for the MATLAB Simulink for Electrical Engineering course is: Aspiring Engineers: Beginners eager to dive into Electrical Engineering. Professionals: Experts aiming to update or broaden their skills. Students: Pursuing Electrical Engineering academically. Researchers: Seeking in-depth tools and methodologies. Innovators: Exploring Electrical Engineering for product development. Hobbyists: Passionate about electronics and electrical systems. After Completing this course, you can later enrol in these courses: Level 3 Award in the Initial Verification and Certification of Electrical Installations Level 3 Electrotechnical Qualification Requirements Without any formal requirements, you can delightfully enrol in this MATLAB Simulink for Electrical Power Engineering course. Just get a device with internet connectivity, and you are ready to start your learning journey. Thus, complete this Electrical Engineering course at your own pace. Career path Our MATLAB Simulink for Electrical Engineering course will prepare you for a range of careers, including: Electricians Junior Electrical Engineer Control Systems Engineer Power Systems Analyst Digital Circuit Designer Power Electronics Engineer

MJ Electrical Training offers a one-day online course for a Health & Safety Exemption, which can be used when applying for an ECS Labourers card. ECS (Electrotechnical Certification Scheme) is a card scheme for electrotechnical operatives in the UK. The ECS Labourer card is designed for those working in a supporting role within the electrotechnical industry.

MJ Electrical Training offers a one-day online course for a Health & Safety Exemption, which can be used when applying for an ECS Labourers card. ECS (Electrotechnical Certification Scheme) is a card scheme for electrotechnical operatives in the UK. The ECS Labourer card is designed for those working in a supporting role within the electrotechnical industry.

MJ Electrical Training offers a one-day online course for a Health & Safety Exemption, which can be used when applying for an ECS Labourers card. ECS (Electrotechnical Certification Scheme) is a card scheme for electrotechnical operatives in the UK. The ECS Labourer card is designed for those working in a supporting role within the electrotechnical industry.

Unlock the future of sustainable mobility with EnergyEdge. Explore EV battery design and charger technology in our comprehensive training program. Join now!

10 QLS Endorsed Courses for HVAC Technician | 10 Endorsed Certificates Included | Life Time Access