61 Divi courses in Bedworth

If you have at least 5 years working experience and you would like to attain Gold Card status via the Experienced Worker route by joining the City & Guilds 2346 NVQ Level 3, you will also need to hold the below two pre-requisite qualifications: City & Guilds 2391-52 Inspection and Testing Course C&G 2382-22 BS7671 18th Edition

The course is designed to help improve your understanding of the legal requirements, the theoretical and practical principles for both the initial verification and certification of an electrical installation, further your knowledge and practical skills in the testing and inspection of a range of existing electrical installations, and help improve your understanding of the legal requirements, the theoretical and practical principles for the periodic inspect and testing and certification of an electrical installation.

This qualification is suitable for those aged 16 and above who work with, or care for, children.

This Level 4 City and Guilds 2396-01 Design and Verification of Electrical Installations course has been designed to help develop the skills and up date the knowledge of the requirements to enable you to professionally design, erect and then verify an electrical installation. This course is aimed at those who will have responsibility for designing, supervising, installing and testing electrical installations. Further information can be found here: C&G 2396 Electrical Design Course — Optima Electrical Training (optima-ect.com)

The IMI Level 2 Award in MOT Testing is the second stage in becoming a qualified MOT tester. It was developed alongside the Driver and Vehicle Standards Agency (DVSA) and is designed to equip learners with the qualification, knowledge and skills necessary to carry out and accurate and repeatable MOT Test Routine. Once you have successfully completed and passed this award, the final stage (stage 3) will be to complete a VT8 demonstration MOT test with a DVSA assessor to receive your certificate of competence. This will normally be conducted in your own Vehicle Testing Station (VTS) and successful completion will allow you to commence testing with immediate effect. What you will achieve Successful completion of the IMI Level 2 Award in MOT Testing (Classes 4 and 7), will give you a valuable academic qualification recognised by the DVSA that demonstrates your skills and knowledge in conducting MOT testing. Cost of Course The cost of this course is £795 + VAT per candidate. Course Overview The main topics covered during the course are: Working Safely within a Vehicle Test Centre Working Relationships Professional Development Pre-Test Checks Conducting the The MOT Test routine. Our courses are ran using a blend of practical and theory based study in small groups of 4 candidates in order to maximise on tutor contact time. Upon application, we will send you some pre-course learning materials and videos to study that will fully prepare you for what is a very demanding course and assessment. Completion of this work forms part of the guided learning hours for this course and is therefore mandatory. Candidates failing to complete this work may be refused entry onto the course. Entry Requirements To be eligible to undertake the The IMI Level 2 Award in MOT Testing (Classes 4 and 7), you must: have a current and full UK driving licence for the classes of vehicle you wish to test be a skilled mechanic, with at least 4 years full-time employment in the service and repair of cars and vans. have a suitable level 3 qualification (please see list below) have no unspent convictions for criminal offences connected with the MOT testing scheme or the motor trade, or involving acts of violence or intimidation and be of good repute. Click here for acceptable entry qualifications. Who Should Attend The IMI Level 2 Award in MOT Testing (Classes 4 and 7), has been developed for individuals who would like to improve their career by becoming qualified MOT Testers. The course is run over four days with the final assessments being conducted on day 4. Pre-course training material will be sent through 2 weeks before start date to complete prior attendance. The assessments consists of an online test of 40 questions and a demonstration MOT where you will be observed carrying out a full MOT demo test. The theory part of the test is ‘open book’ which means you will be able to use reference materials such as the MOT Testers Manual during the test. The pass mark for this test is 80%. Learners wishing to undertake this course MUST poses a good standard of written and spoken English as all MOT training and testing is conducted in English.

This is suitable for anyone managing teams or looking to manage teams in the future. Using the participants own experiences we will look at what drives team effectiveness and the traits of High Performing Teams.

The IMI Award in MOT Test Centre Management, has been developed with the Driver and Vehicle Standards Agency (DVSA) to provide learners with the qualification, knowledge and skills necessary to manage MOT Vehicle Test Centres. What you will achieve Successful completion will give you a valuable academic qualification recognised by the DVSA that demonstrates your skill and knowledge necessary to successfully run and manage an MOT station on a day to day basis as well as fully understanding the DVSA’s legislative and compliance requirements. Cost of Course The cost of this course is £575.00 + VAT per candidate. Please contact us for further information. Course Overview The MOT Test Centre Manager Training course and assessment is normally ran over 2 1/2 days in total with the 1/2 day revision and online test often ran a few days after the initial training to allow candidates time to absorb the information. The main focus of the courses will teach you how to: manage the legislative and compliance knowledge required to manage an MOT test centre effectively encourage improvements in customer service develop and supervise staff with an MOT centre understand the MOT test centre quality systems and audits Assessment is by an open book online IMI test. Who Should Attend The MOT Test Centre Manager Training qualification is primarily developed for learners who wish to run an MOT Vehicle Test Station (VTS), or who will have direct responsibility for MOT operations at the VTS in the future. There are no formal entry qualifications for this course but learners MUST possess a good standard of written and spoken English as all MOT manuals, training and testing is conducted in English.

The IMI Four Wheel Alignment course is 2 1/2 days in duration and is aimed at Technicians involved with carrying out light vehicle wheel alignment. It is advised that candidates should have a minimum of 3 months practical wheel alignment experience but courses of longer duration can be arranged for those people requiring it. Successful candidates will receive an IMI Quality Approved Award in Steering & Wheel alignment. As well as being recognised throughout the Motor Industry, this qualification will also count towards the NTDA tyre Technician Professional Development Scheme’s Licenced Retail Tyre Technician licence. PLEASE NOTE THIS COURSE FOCUSES ON THE FUNDAMENTALS OF WHEEL ALIGNMENT AND NOT ON ANY PARTICULAR TYPE OF WHEEL ALIGNMENT EQUIPMENT. Course Details: Classroom based theory session Workshop practice session Examination and assessment Course Fees £545 + VAT Per Candidate *Please contact us for group rates and onsite training Course Content Theoretical Health & Safety Components, functions & Layout of vehicle steering systems Steering angles and how they work together Common faults associated with steering systems 4 wheel alignment Practical Pre-alignment vehicle inspection. Carry out 4 wheel alignment. Carry ou a thrust angle alignment IMI assessment and test A multi-choice theory question paper Two practical assessments, observed by an IMI approved assessor.   What’s included Fully qualified and experienced trainer Course booklet Examinations Fees and Certification One year IMI membership To find out more, please use the live chat function, visit our contact page or call us on 024 76325880

The IMI PAC course in Light Vehicle Brake Fitting is 3 days in duration and is aimed at fitters who want to improve their knowledge and skills A minimum of 3 months practical experience is required as this is not an introductory course. An alternative course is available for those with no previous experience, contact us for more details Successful candidates will receive an IMI Professional Achievement Certificate in Light Vehicle Brake Fitting.  Course Details: Classroom based theory session Workshop practice session Examination and assessment Course Fees £499.00 + VAT per candidate *Please contact us for group rates  Course Content Theoretical Health & Safety Brake types (disc brake & drum brakes) Hydraulic operating systems Brake arrangements Brake valves Brake fluid Servo assistance Introduction to ABS and EPB Practical Brake pad and disc removal and re-fitting Brake drum and shoe removal and re-fitting Manufacturing a brake pipe Bleeding a hydraulic system IMI assessment and test A multi-choice theory question paper Five practical assessments, observed by an IMI approved assessor. What’s included Fully qualified and experienced trainers Course booklet Examinations Fees and Certification One year IMI membership To find out more, please use the live chat function, visit our contact page or call us on 024 76325880

The IMI Motorcycle Tyre Fitting course is 3 days in duration for and is aimed at Fast Fit Technicians and Specialist Tyre Fitters involved with working on Motorcycle Tyres. Candidates must have a minimum of 3 months practical motorcycle tyre fitting experience.  Successful candidates will receive an IMI Quality Approved Award in Motorcycle Tyre Fitting recognised throughout the industry. A basic tyre fitting course can be provided for those with little or no experience. Course Details: One day classroom based theory session One day workshop practice session One day examination and assessment Course Fees £475.00 + VAT per candidate Please contact us for group rates Course Content Theoretical Health & Safety Motorcycle Tyre construction identification Motorcycle Wheel rim identification MotorcycleTyre sidewall markings Construction & Use regulations Limits of wear and serviceability Fault identification methods Tyre and inner tube repairs Practical Tyre fault identification and reporting Safe wheel removal and replacement Safe wheel balancing Safe removal and replacement of tyres Safe tyre and inner tube repairs to BSAU159g IMI assessment and test A multi-choice theory question paper Four practical assessments, observed by an IMI approved assessor. What’s included Fully qualified and experienced trainers Course booklet Examinations Fees and Certification One year IMI membership To find out more, please use the live chat function, visit our contact page or call us on 024 76325880