1858 Courses

Aim To equip care staff with the knowledge, confidence, and practical skills to respond effectively and safely when a resident experiences a cardiac arrest, ensuring best practice in emergency resuscitation procedures. Learning Objectives By the end of the session, staff will be able to: Recognise the signs of cardiac arrest in a care home setting. Initiate a safe and effective emergency response, including correct positioning of the resident. Perform high-quality CPR on an adult using correct technique and rhythm. Use a defibrillator (AED) confidently and correctly. Identify environmental risks and adapt the environment to enable effective resuscitation. Demonstrate teamwork and role allocation in an emergency. Reflect on the importance of debriefing and support following a resuscitation incident. Location for delegates attending in person Foresters Nursing Home, Walton Pool, Stourbridge DY9 9RP Timings of the course 9.30am to 11.30am 12.00pm to 2.00pm 2.30pm to 4.30pm Before you book: Please do not send along staff who have just worked a nightshift. People arriving tired, stressed or late cannot gain the most benefit from a training course. We reserve the right to turn away individuals too exhausted to focus on the training or staff who turn up late for a course and disturb the flow of the proceedings. All CH Care Training courses are fully inclusive, but if you have any concerns about a member of staff's ability to participate because of physical, sensory or learning differences then please let us know in confidence in advance, so that we may make the appropriate adjustments. Cancellations CH Care Training operates a sliding scale of cancellation; If you cancel more than two weeks before the start date of a course, you can ask for a full refund, to change the names of the delegates being sent along, or to transfer a delegate to another training date. If you give less than two weeks but more than one week's notice of cancellation, 50 percent of the booking can be refunded. If you cancel less than a week from the training delivery date we wont be able to refund. There are no refunds for staff who do not turn up on the day of the training course. If CH Care Training needs to change the date or cancel a course for any reason we will give you the maximum notice we can. In exceptional circumstances we may cancel a course due to extreme weather or circumstances at the training venue. You will be offered a full refund or the opportunity to transfer your booking to an alternative date. Please ask your staff to read the following guidance before they attend the course: Arriving at the Venue The course will start promptly so please arrive at least 15 minutes before the start time of the training to allow plenty of time to use the toilet, and be seated ready for the start of the course. You can call Training direct on 0798 999 5180 if you are struggling to arrive on time. Please note that the meeting will be locked to late arrivals 10 minutes after the actual course starts. During the course As this is a working environment please ensure you allow the necessary time and focus to get the best from the material being presented. Please bring pen and paper to make notes during the course. Our training sessions are fun and very interactive. We will encourage plenty of comments, points of view and the sharing of lived experiences. Delegates should not share any sensitive information about a client or organisation. Our session agreement asks delegates to maintain confidentiality about individuals and organisations and to respect the views of others on the course. All CH Care Training courses are inclusive, but if you have any concerns about your ability to participate, such as sensory or learning differences then please let the Trainer know in confidence before the start of a course, so that they may make the appropriate adjustments. If the course contains practical elements such as Moving & Handling or First Aid, then please wear appropriate clothing to take part in these activities. You will be asked confidentially if you have any health concerns that could prevent you from taking part in the practical activities. Please let a Trainer know if you have any concerns about taking part in the practical courses. Refreshments are provided for free. Please bring a packed lunch for any full-day courses. After the course We will email you a pdf of the course once the training has finished and we have checked that everyone was able to join. If your Manager booked you onto the course using your work or personal email, or if you book yourself onto a course, you will receive the pdf directly. If your Manager booked you onto the course using your organisation’s email address a copy of the course will be available on request from your Manager. We will also email a link to an online evaluation and we ask that you please fill this in and return it to us so that we can continue to improve our services. All of our evaluations are gathered anonymously. If you have any questions, please contact Training on 0798 999 5180 or email sales@chcaretraining.co.uk.

ITIL® 4 Specialist: Create, Deliver and Support: In-House Training The ITIL® 4 Specialist: Create, Deliver, and Support module is part of the Managing Professional stream for ITIL® 4. Candidates need to pass the related certification exam for working towards the Managing Professional (MP) designation. This course is based on the ITIL® 4 Specialist: Create, Deliver, and Support exam specifications from AXELOS. With the help of ITIL® 4 concepts and terminology, exercises, and examples included in the course, candidates acquire the relevant knowledge required to pass the certification exam. What You Will Learn The learning objectives of the course are based on the following learning outcomes of the ITIL® 4 Specialist: Create, Deliver, and Support exam specification: Understand how to plan and build a service value stream to create, deliver, and support services Know how relevant ITIL® practices contribute to the creation, delivery, and support across the SVS and value streams Know how to create, deliver, and support services Organization and Culture Organizational Structures Team Culture Continuous Improvement Collaborative Culture Customer-Oriented Mindset Positive Communication Effective Teams Capabilities, Roles, and Competencies Workforce Planning Employee Satisfaction Management Results-Based Measuring and Reporting Information Technology to Create, Deliver, and Support Service Integration and Data Sharing Reporting and Advanced Analytics Collaboration and Workflow Robotic Process Automation Artificial Intelligence and Machine Learning CI / CD Information Model Value Stream Anatomy of a Value Stream Designing a Value Stream Value Stream Mapping Value Stream to Create, Deliver, and Support Services Value Stream for Creation of a New Service Value Stream for User Support Value Stream Model for Restoration of a Live Service Prioritize and Manage Work Managing Queues and Backlogs Shift-Left Approach Prioritizing Work Commercial and Sourcing Considerations Build or Buy Sourcing Models Service Integration and Management

MTS Glow Course- you must be qualified in micro-needling already. If not, we combine our MTS Glow course with micro-needling as well Please note: BB Glow wording has been trademarked and it's illegal to use unless permission has been granted from the owner. This means all accreditors have revoked the courses being accredited under this name. Therefore, we have trademarked our course to MTS Glow and our students are free to use this for advertising purposes. What is MTS Glow? BB Shine is a unique Korean produced serum with the addition of a foundation. Using Micro Needle Therapy System the goal of the treatment is to lighten and smooth the face skin tone. Course Content -Anatomy of the face and skin - Skin physiology - The choice of colour for the type of skin - Use of ampoules - Purpose of the treatment and the obtained effect - Contraindications for MTS Glow treatments - Possible complications after treatments - Types of pigments - Consultation/consent form - Step by step on how to offer MTS glow treatment Course Content for microneedling: https://www.kbhtrainingacademy.com/product-page/microneedling-course Training Kit for MTS Glow only(you must supply your microneedling pen and nano needles) 5x BB ampules Cleanser Neutralising foam Face Mask Repair Cream Training Kit for MTS Glow & Microneedling 5x BB ampules 5x Microneedling serums Cleanser Neutralising foam Face Mask Repair Cream DR Pen 5x nano needle 5x 12pin needle How does the course work? The course is divided into 2 parts, the first part is theoretical which you have to complete before you come for your practical training, and the second one is a practical assignment. The practical assignment is done on the day which will be agreed upon course purchase. You will spend around 3 hours practising on a model in our venue in London E106RA. Will I require a model? Yes, usually 1 model is required Do I Need Experience Before Booking a Course? You must be qualified in micro-needling already. If not, we combine our MTS Glow course with micro-needling as well Certificate You will receive an end of course certificate which is accredited by the cpd group and allows you to work on public PAYMENT Payments are non refundable. By paying for the course you agree to our terms and conditions.

Wood Therapy and BBL Vaccum Training- option without kit doesn't include wood therapy tools nor bbl machine. Wood Therapy aka Maderoterapia What is wood therapy? Wood therapy is a technique in which a rigorous and complete massage is performed with the help of various utensils made of wood. Each of these instruments has a specific shape and size since they adapt to different areas of the body to fulfil a function. Benefits: Redaction of cellulite Body contouring Bum Lift Helps to reduce stress and muscle tension Increases blood circulation Lymphatic drainage support Course Content: What is wood therapy History of wood therapy Benefits of wood therapy Contraindications Tools and their usage Anatomy Lymphatic system Health and Safety Consultation Step by step process Aftercare Brazilian BBL Non-Surgical Buttock Enhancement What is Non-Surgical BBl? A non-surgical Brazilian Bum Lift is a safe and non-invasive way to lift the sculpt the shape of your bum. Using our specialist equipment, focused heating causes the contraction of the fibres in your bum, resulting in an immediate tightening of your skin in this area. This Lipofirm technology used in our treatments brings increased smoothness and softness to the skin, in addition to the tightening and lifting that will help you to feel so much better about an area you may not be comfortable with. Course content: Health and safety Sterilisation and disinfecting The appearance of the therapist Ergonomics About Brazilian bum lift enhancement Electricity Skin laxity Epidermis & dermis Hypodermis Weight gain Subcutaneous fat White and brown adipocytes Cellulite Mechanical lymphatic drainage Electrical muscle stimulation Skin tightening - radiofrequency Fat reduction - radiofrequency Contra-actions Contra-indications Aftercare Treatment protocol for bum lift How does the course work? The course is divided into 2 parts, the first part is theoretical which you have to complete before you come for your practical training, and the second one is a practical assignment. The practical assignment is done on the day which will be agreed upon course purchase. You will spend around 3-4 hours practising on a model in our venue in London E106RA. Will I require a model? Yes, usually 1 model is required. You need to supply your own model. Do I Need Experience Before Booking a Course? We’re pleased to offer courses to people with lots of different experiences. However, previous experience nor qualifications are not necessary if you would like to enrol on our Course. Certificate You will receive an end of course certificates which is accredited by the cpd group and allows you to work on public Machine(if purchased) You will have 6 months warranty from the date of purchase on the machine and 3 months on the handles. Please check our terms and conditions for further information. Payment By paying for the course you agree to our Terms and Conditions

Explore ways of creating simple, striking images to print onto an array of papers on this monoprinting workshop with Edinburgh artist Suzanne Kemplay at The Arienas Collective in Edinburgh City Centre

At Black & Gold Audio we offer beginner, intermediate, advanced and expert sessions for anyone aged 14 and over. The sessions are carried out either within our studios in Truro, Cornwall or remotely using ZOOM. They are designed around you the learner and your own specific wants and needs. Our tutor is an expert in the fields of acoustics, recording, traditional and electronic music composition, music production, sequencing, sound design, mixing and mastering, film, TV and game audio. Who is this course for?  Candidates who are interested in a more one to one based learning program remotely or within a professional industry standard environment, tuition is flexible regarding days, hours and regularity. Most importantly the tutor can design a program that it suited to you and your requirements, a meeting with the tutor can be arranged beforehand to discuss a learning plan for you. Flexible 1 to 1 tutoring is a great way to learn at your own pace with no pressures and with the support of an industry expert. You may also be interested in the RSL Music Production Grades 1-8 which we deliver on a 1 to 1 basis too, see HERE. What will I learn?  This is a very open ended question for these types of sessions, its about what you want to learn and our tutor will talk with you to figure out the a suitable program for your needs. We cater for beginners, intermediates, advanced and expert students. How will I learn? The aim of these courses is to build a basic to advanced knowledge and understanding in various specialist areas of the industry, each tailor made course will support your learning through progress tracking and access to some amazing learning resources provided by our tutor. Each session will focus and build upon the last so that you are eventually able to meet your desired end goal. What equipment do I use on the course? The Black & Gold Studio is equipped with a huge range of both industry standard recording equipment, hardware synthesizers, drum machines, fx processing and control surfaces, and that’s before we even get inside the computer!! You can be taught to use DAW’s such as Logic Pro X, Cubase, Pro Tools & Ableton Live as well as explore other 3rd party softwares such as NI Komplete, Izotope, Fabfilter, Waves and so many more.

Run from our indoor workshop in Tenterden, Kent, we’ve put this one-day leather working course together for anyone with an interest in leather, craft, or who simply wants to explore another avenue of bushcraft. You don’t need any previous experience with leather working as you will learn the core skills and techniques on the course. It’s a perfect introduction to making traditional leather items. So if you’re looking for an unforgettable day, join our experienced craftsman, Paul Bradley, in a leather working day that focuses on leather work tools, design and construction. We have designed this course around the making of a simple notebook holder. We have chosen this as a project as it covers all the basic skills required to produce almost any small leather goods. There is also large scope for customisation of your project. Along the way you will learn about different leathers, techniques and tools. Typically, you will, under the expert guidance and instruction of Paul Bradley: - Use the provided pattern to produce a leather cover for a standard 5.5 x 3.5 notebook - Be guided on how to design and draw out and customise a pattern - Learn all about the different tools used in leather working and how to use them - Learn how to cut out, assemble and mark for stitching - Learn and practice the techniques of the traditional saddle stitch to complete the assembly of your notebook - Learn how to finish your project with edge burnishing techniques and other small but important details that add to the overall professional look. A really great chance to begin a lifetime of making beautiful things! About us and the venue: Jack Raven Bushcraft was founded in 2011 and we've been delivering bushcraft, craft and foraging courses since then from our 30 acre private ancient woodland on the Kent Downs in an area of outstanding natural beauty. This course is held in a purpose built indoor workshop. What's included in the price? All tools, equipment and materials are provided, as well as a free notebook to take away with you. Tea and coffee provided. Cancellation policy Strict - Cancellation and a full refund can be obtained up to 8 weeks before the course starts

In this one-day introduction to grain setting techniques, you will learn how to set small stones in a selection of styles. We will begin with a simple single stone grain setting before moving onto a traditional star setting and finally a row of five stones in a thread and grain style setting. During the day we will also look at considerations for grain setting as well as the preparation of tools and possible applications. WHEN: Saturday 14th September 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Stephen Barnett WHAT DOES THE DAY INVOLVE? In this one-day introduction to grain setting techniques, you will learn how to set small stones in a selection of styles. We will begin with a simple single stone grain setting before moving on to a traditional star setting and finally a row of five stones in a thread and gain style setting. During the day, we will also look at considerations for grain setting as well as the preparation of tools and possible applications. As always with advance stone setting, we strongly recommend you set aside some time after your course to practice the skills you learn to develop your technique. We will be in touch the week of your course with full details and directions and any other helpful information we think will be of use for the day. EXPERIENCE REQUIRED: Students should have some stone setting experience and be confident using normal jewellery tools and equipment. If you are unsure, please email us at hello@workshop925.com to discuss any queries, we are always here to help. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied including your stones and silver. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any lunch, snacks and drinks which you may want to your session. We have tea and coffee for you to help yourselves to. For stone setting courses, it is also recommended to bring Optivisors if you have any or glasses which allow you to see smaller stones. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Resin agate and geode course based in Bracknell

This 2-day workshop will help participants develop the skills and confidence to advance their screen-printing experience.