68 Crane courses

NPORS Lorry Loader (N107)

Course Aims The CPCS A61 course is suitable for supervisors and managers who have responsibility for lifting operations. It will give candidates an understanding of the Appointed Person’s responsibilities, how to fulfil them and the skills and ability to interpret and apply sections 1, 2, 3 and 4 of the BS 7121 Safe Use of Cranes guidelines. If you already hold the CPCS A40 Slinger/Signaller qualification, on completion of this course you will also achieve the CPCS A62 Crane Supervisor qualification. Course Content On completion of the course, students will understand: Roles and responsibilities of lifting operations personnel Legislation, regulations and codes of practice Duties of the Appointed Person Thorough examination and certification Selection of cranes Lifting capacity and duties charts Crane positioning and configuration Selection and use of lifting accessories Methods of communication Carrying out a risk assessment Preparing a method statement Crane plan and elevation drawings Entry Requirements Candidates should have sufficient experience of cranes to meet the requirements specified in British Standard 7121 Safe Use of Cranes. Candidates must have achieved the Managers CITB Health, Safety & Environment (HS&E) Touchscreen test no more than two (2) years before the course, or CPCS Test. Good understanding of spoken and written English. Assessment Four (4) Days Training – Classroom-based and Practical Training One (1) Day – CPCS Testing OutcomeOn successful completion, candidates will be awarded with the CPCS Red Trained Operator Card which is valid for 2 years.Next StepsTo upgrade your card to blue, you will need to complete the Level 5 NVQ Diploma in Controlling Lifting Operations - Planning Lifts and a Managers Health, Safety and Environment Test completed within the last 2 years. Please contact us for more details.

Training is on Days 1-3. Testing will be on either day 4 or day 5. Course structure: Establish the weight and dimensions of loads and communicate this information to the crane operator. Select appropriate lifting tackle and attach and detach it correctly and safely. Use clear and unambiguous signals to direct the actions of a crane moving loads of various weights and dimensions. Determine the serviceability of lifting accessories, and maintain and store them. Includes ‘Pick & Carry’ Duties training and testing. The course runs for 4 days (3 days of training and 1 days for technical tests). Instructions You must also bring your own PPE (boots, hi vis vest or jacket, hard hat and gloves). NB VERY IMPORTANT: All candidates must provide identification in the form of a current Photo ID Driver Licence or Passport. If you do not have one of these please call or email us to ask what suitable alternatives might be. If you are undertaking a CPCS course you MUST have passed an approved CITB or NOCN Health, Safety and Environment Test within the last 2 years. If you are unsure about this requirement, please contact us at cpcs@handsonskills.co.uk. If there are any queries regarding this booking, or if you would like to talk to us about further training requirements, please do not hesitate to contact us. You can contact us from Monday to Friday between 09.00 to 16.00 on: Tel: 020 7511 7881 and by email to cpcs@handsonskills.co.uk Before you attend the course, please read the joining instructions and training terms and conditions. It is very important that the course delegate understands the course objectives and complies with the centre rules before attending the course in order to gain maximum value from training. Details of the course are as follows: Registration and course timings: Courses will start at 08:00. You should aim to be at the centre a minimum of 15 minutes prior to the course start time for signing in. There is a half hour break at lunch time (approximately at 12:00) and courses generally finish between 15.30 and 16.00. Depending upon the course content, the instructor may require the course to start and finish at different times on subsequent course days (if any). 📎 SLINGER_manual_PDF_v1.pdf

This Construction Safety course is developed by industry experts and is packed with several insightful modules to give you a proper understanding of Construction Safety and allow you to accelerate your career. Rigging is the act of preparing equipment to be lifted by cranes, hoists, or other material-handling machinery. This Rigging Construction Safety and Industry course is designed to provide learners with updated knowledge of the safety practice while working with cranes and hoist systems. The loads that cranes lift come in all shapes and sizes. If mishandled, they can cause serious problems. Loads that have been improperly rigged can be dumped on the ground, start to spin, or swing out of control which can be hazardous for anyone near them. The rigging safety course reviews the hazards associated with rigging and moving loads, discusses the equipment and safe work practices that employees should use to avoid tragic consequences. Learning Outcome of Rigging Safety for Construction and Industry: By the end of the course learners will be able to demonstrate that they can: Introduce yourself with the method of Rigging Identify the hazards involved while lifting with a crane Familiarize the method of choosing the right sling for the load Explore the Types of hitches and how to use them. Learn about the Standard hand signals Expand your knowledge on Lifting, moving, and lowering loads safely Rigging Safety for Construction and Industry Course Curriculum: Module 01 - Rigging and crane safety. Module 02 - Choosing the right sling for the load. Module 03 - Types of hitches and how to use them. Module 04 - Standard hand signals. Module 05 - Lifting, moving and lowering a load safely. Rigging Safety for Construction and Industry Course Assessment & Certification: To claim your certificate from Compliance Central, you need to complete the assessment of this course successfully. After that, you will have to order the digital certificate for £3.99. And for the hard copy, the charge will be £8.99, without any shipping charge inside the UK. However, the additional shipping charge will be £9.99 for international delivery. CPD 10 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This comprehensive Construction course is ideal for individuals associated with the sectors such as: Construction workers Safety professionals Anyone who needs the relevant knowledge of crane and hoist instruments Requirements This Rigging Safety for Construction and Industry course has no requirements. Career path The Rigging Safety for Construction and Industry course will enable you to get hired in Rigging Safety for Construction and Industry-related jobs. Certificates CPD Accredited PDF Certificate Digital certificate - Included CPD Accredited PDF Certificate CPD Accredited Hard Copy Certificate Hard copy certificate - £10.79 CPD Accredited Hard Copy Certificate Delivery Charge: Inside the UK: Free Outside of the UK: £9.99 each

Level 4 NVQ in Controlling Lifting Operations - Supervising Lifts Lift Supervisor The Lift Supervisor Level 4 NVQ is accessible to those that undertake the duties of a Lift Supervisor / Crane Supervisor. They will work as part of a team to ensure the lifting operations comply with the law and secure the health and safety of employees and of all those affected by the operations. Induction - As soon as you register you will be given a dedicated assessor. They will arrange an induction and together with your assessor you'll get to decide on the pathway which best proves your competency. The induction is used to plan out how you will gather the relevant evidence to complete the course. During the course - The assessor will work with you to build a portfolio of evidence that allows you to showcase your knowledge, skills and experience. The assessor will also regularly review and provide you with feedback. This will allow you to keep on track to progress quickly. You will be assessed through various methods such as observations, written questions, evidence generated from the workplace, professional discussion and witness testimonials. On completion - Once all feedback has been agreed, the Internal Quality Assurer will review your portfolio and in agreement with your assessor the certificate will be applied for. To download our PDF for this course then please click here.

Using an excavator as a crane is a common practice in certain construction and lifting operations. Using the digger as a crane requires appropriate training and skills However, it’s important to note that excavators are primarily designed for digging and earthmoving, not lifting. Using an Excavator as a Crane involves some inherent risks, and it’s crucial to follow safety guidelines and manufacturer recommendations. To book the NPORS Excavator as a Crane training or test please contact us to schedule your Training Here are some general considerations and steps you might take when using an excavator as a crane: 1. Check Manufacturer Guidelines: Always consult the manufacturer’s guidelines and specifications for the specific excavator model you are using. Manufacturers provide load charts and other essential information to ensure safe operation. 2. Understand Load Capacities: Know the lifting capacities of your excavator at various boom lengths and angles. Exceeding these capacities can lead to instability and accidents. 3. Use Proper Attachments: If your excavator is equipped with a lifting attachment, make sure it is designed and rated for lifting operations. Using inappropriate attachments can compromise safety. 4. Stabilise the Excavator: Ensure that the excavator is on stable ground. Extend the outriggers or stabilisers to provide additional support and prevent tipping. 5. Inspect the Excavator: Regularly inspect the excavator for any signs of wear, damage, or malfunction. Pay particular attention to the boom, hydraulics, and other critical components. 6. Position the Excavator: Position the excavator in a way that allows for a stable lifting operation. Avoid working on slopes or uneven surfaces. 7. Rigging and Lifting Techniques: Use proper rigging techniques, and ensure that the load is properly secured. Lift the load smoothly and avoid sudden movements. 8. Maintain Clear Communication: Establish clear communication between the operator and any ground personnel involved in the lifting operation. Use hand signals or radios to coordinate movements. 9. Avoid Exceeding Reach Limits: Do not exceed the excavator’s reach limits. Lifting loads beyond the recommended reach can lead to instability. 10. Training and Certification: Ensure that operators are properly trained and certified for lifting operations. Holding the NPORS Excavator As A Crane bolt on is essential for lifting operations Operating an excavator as a crane requires specific skills and knowledge. 11. Weather Conditions: Consider weather conditions, especially wind speeds, as they can affect the stability of the excavator during lifting operations. Always prioritise safety when using equipment for tasks it wasn’t originally designed for. If the lifting requirements are frequent or extensive, it may be more appropriate to use a dedicated crane with the necessary capacity and features. Remember, safety is paramount in any construction or lifting operation. Frequently Asked Questions 1. What is Excavator As A Crane Training, and why is it necessary? Excavator As A Crane Training provides individuals with the skills and knowledge required to safely and effectively use excavators for lifting operations. Although excavators are primarily designed for digging and earthmoving, this training ensures operators can perform lifting tasks safely, minimizing risks and accidents on job sites. 2. Who should undergo Excavator As A Crane Training? This training is essential for anyone involved in using excavators for lifting operations, including machine operators, construction workers, and site supervisors. Proper training ensures that individuals understand equipment operation procedures, load capacities, and safety protocols. 3. What topics are covered in Excavator As A Crane Training programs? Training programs cover a range of topics, including: Manufacturer guidelines and load charts Understanding load capacities at various boom lengths and angles Proper use of lifting attachments Excavator stabilization techniques Rigging and lifting techniques Positioning and communication strategies Safety procedures and weather considerations Regular inspection and maintenance of equipment 4. Is Excavator As A Crane Training mandatory in certain industries? While not legally mandated in all areas, many employers in the construction and lifting industries require operators to undergo training as part of their occupational health and safety policies. Compliance with excavator as a crane training requirements helps prevent accidents and ensures regulatory compliance. 5. Where can I find reputable Excavator As A Crane Training courses? Reputable Excavator As A Crane Training Courses are offered by various institutions, including industry associations, equipment manufacturers, and specialized training providers like Vally Plant Training. It is important to choose a program that offers accredited certification and covers relevant industry standards and best practices.

The aims and objectives of this Initial Training Programme are to provide personnel, who have little experience of the Banksman and Slinger role, with the basic knowledge of activities associated with the combined roles, and the safety and regulatory requirements of those activities.The Banksman role is primarily to replay instructions to the crane operator during lifting activities, and the Slinger role is to prepare and sling loads for lifting, and release the loads at their destination. Certificate Validity: 1 Year Upon successful completion of this online course, a certificate of completion will be available for download and printing. COURSE ASSESSMENT: Online quiz A mark of 70% must be achieved in order to receive a certificate of completion. Language of Training: English

Course ContentThe ALLMI Slinger / Signaller course content is extremely comprehensive and so cardholders are able to use their skills when performing Slinger / Signaller duties with other types of lifting equipment, not just lorry loaders. The Slinger / Signaller course consists of 13 modules (please click here for a list of course modules). The course duration is one day for experienced candidates and a minimum of two days for novice candidates. A maximum of four candidates can attend a course. Both courses culminate in a written and practical examination.AssessmentThe assessment process is set by ALLMI and administered by the Instructor. It consists of two theoretical assessments and one practical. The theoretical assessments consist of a set of multiple choice and ‘open’ questions. The practical assessment is designed to identify whether the candidate has the appropriate practical skills to perform their duties as a Slinger / Signaller safely and efficiently.Card, Certificate & ManualUpon successful completion of the course every candidate will receive an identity card and certificate, and will be registered on the ALLMI database. The identity card and certificate are valid for five years, after which time refresher training and assessments will need to be undertaken. Candidates also receive the ALLMI Slinger / Signaller manual, which is used as a reference guide throughout their career. Industry ExpertiseThe strength of ALLMI training comes from the technical and training knowledge of its Training Standards Committee. The Committee is made up of training and technical professionals from all the major loader crane manufacturers and importers within the UK. In addition, the Health and Safety Executive is represented. The Committee develops, consults upon and maintains all the training standards set by ALLMI.

Equipment used - Lorry mounted cranes and Hook attachments. Who Would Do This Training? Anyone who operates or intends to be operating lorry mounted cranes (sometimes referred to as HIAB’s) should undertake training as is required by the Lifting Operations and Lifting Equipment Regulations 1998. This course is made to suit novice operators, and are designed to ensure the efficient and safe operation of equipment. HIAB is really a brand name and the correct term for the equipment is ‘lorry mounted crane’ or ‘lorry loader crane’ (when mounted to a commercial vehicle). Other manufacturers of these types of cranes include Atlas, Cormach, Fassi, HMF, Hyva, Palfinger, Penny Hydraulics and PM. Which Industries Train with ALLMI? The ALLMI Lorry Loader Course is recognised by CSCS. The Lorry Loader Crane courses and Slinger Signaller courses, certificated by ALLMI, cover a wide variety of hydraulic cranes, both manually and electronically operated. Manuals and Postage of ALLMI Certificate and Card are included in your Ticket Price

Overview This comprehensive course on Make Cinematics Using Unreal Engine 5 will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This Make Cinematics Using Unreal Engine 5  comes with accredited certification from CPD, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast-track your career ladder. How will I get my certificate? You may have to take a quiz or a written test online during or after the course. After successfully completing the course, you will be eligible for the certificate. Who is This course for? There is no experience or previous qualifications required for enrolment on this Make Cinematics Using Unreal Engine 5. It is available to all students, of all academic backgrounds. Requirements Our Make Cinematics Using Unreal Engine 5 is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course, it can be studied in your own time at your own pace. Career Path Learning this new skill will help you to advance in your career. It will diversify your job options and help you develop new techniques to keep up with the fast-changing world. This skillset will help you to- Open doors of opportunities Increase your adaptability Keep you relevant Boost confidence And much more! Course Curriculum 2 sections • 15 lectures • 02:08:00 total length •Introduction: 00:02:00 •Download Unreal Engine 5: 00:02:00 •How To Create New Project: 00:03:00 •Unreal Engine Shortcuts: 00:14:00 •How To Import Assets: 00:11:00 •How To Use Sequencer: 00:11:00 •How To Use The Camera: 00:08:00 •How To Use Camera Rail: 00:07:00 •How To Use Camera Crane: 00:03:00 •Let's Animate The Scene: 00:28:00 •Animating The Characters: 00:06:00 •Combining The Sequencers: 00:04:00 •Adding Effects: 00:17:00 •Activate Sequence: 00:08:00 •Blueprints Features: 00:04:00