340 Construction courses in Mayfield

In-house training courses on electric and hydrogen vehicle technologies, charging infrastructure and how they work.

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems. There are two options to complete the NVQ Level 3 in Electrical Installations, these are the C&G 2346 and C&G 2357. Successful completion of the NVQ and AM2 assessment will satisfy the entry criteria for JIB accredited electricians

If you want to start installing independently or with an electrical contractor look no further as this course will give you the skills and knowledge required. This package which will allow you to become a fully qualified domestic installer and enable you to join a Competent Person Self-Certification Scheme and certify your own domestic work.

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems.

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems. The EWR is for electricians who have been working in the industry for at least 5 years but have not formally completed an industry apprenticeship or Level 3 NVQ qualification. Successful completion of the NVQ and AM2 assessment will satisfy the entry criteria for JIB accredited Gold Card status. Bear in mind that the C&G 2391-50 and 18th Edition courses are pre-requisites to the Experienced Worker route. In case you don’t hold them, we can help you with a Pre-Experienced Worker Route package.

If you have at least 5 years working experience and you would like to attain Gold Card status via the Experienced Worker route by joining the City & Guilds 2346 NVQ Level 3, you will also need to hold the below two pre-requisite qualifications: City & Guilds 2391-52 Inspection and Testing Course C&G 2382-22 BS7671 18th Edition

Craft workshop using a variety of glass elements with a focus colour to make your own set of trinket dishes. Fused Glass Workshop – Set of Trinket Dishes I want to share my 15+ years of experience with you. This fused glass workshop is held at my Derbyshire studio and gallery space in the middle of Wirksworth near Matlock. About this fused glass workshop Create a set of 3 mini dishes, a perfect size for a tealight candle or to store your earrings and rings. Make for yourself of to give as gifts. Explore two different design/construction processes and use precut tiles, rods and frit balls to create your designs. Can’t make the workshop? Still want to make your own fused glass dishes, check out my simplified (but still sparkly) make at home kit. Explore a little in this short fused glass taster workshop and learn a little about how the kiln firing to 800 degrees c changes the raw/pointy pieces of glass to a have smooth, shiny finish. Simply complete your designs during the session and leave them with me at the studio for me to fire twice, once flat and once into the bowl mould. We will make arrangements to pick up a few weeks later or I can post your finished piece at cost. I will talk through all the Health & Safety in the session but I want you to know now, you will be handling precut glass pieces, they have pointy ends but with the right handling, they won’t hurt you. Recommended for ages 10 and above, all under 16s to be accompanied by a paying adult. Please don’t hesitate to contact me to discuss any queries you may have, big or small and make sure to find me on Instagram and facebook to keep up to date with all the sparkles and to see images of previous students works. Photos shown here (and on my facebook page) are mostly student pieces, a few are my examples. Book with friends or come on your own for a supportive and fun creative fused glass workshop experience. All fused glass workshop attendees receive a 10% discount on purchases from the gallery shop on the day, just a little way I can say thank you for joining me! Things to bring with you: A bottle of water or travel cup of coffee/tea An apron or old clothes so you don’t have to worry about getting glue or little bits of glass on them An open mind and willingness to experiment Booking When booking make sure your email address is correct at checkout as I will email you any further information needed for the workshop. Please also include a contact phone number in the unlikely event that I need to cancel a workshop at short notice. Venue: Create Space Studio & Gallery, 27 Market Place, Wirksworth, Matlock DE4 4ET I feel I need to warn you to consider popping in to a nearby café to use their washroom facilities as the washroom in the studio shop isn’t the best, it’s usable but not the most comfortable or discreet. Workshop T&Cs: Please read through the Terms & Conditions for Glass Fusing Workshops and Courses that are booked here online. When you book a place you are agreeing to the following terms and conditions. Bookings and cancellations Bookings – If you can not attend a workshop, for what ever reason, please contact Stevie as soon as possible. Firstly, we will work together to transfer your place onto another day, suitable for your needs. Another option is for you to offer your place out to a friend or family member. If this is not possible and your cancellation has been more less than 21 days in advance of the event, a refund can be offered. If your cancellation has been made less than 21 days before the event and you can not transfer onto a future date, every effort will be made to fill your place, from further advertising and/or the reserves list. If your space can not be filled by another attendee and you are unable to arrange a replacement yourself unfortunately, no refund can be offered. In the unlikely event that Stevie has to cancel a class, you will be offered either a full refund or a transfer to another date. As much notice as possible will be given, however, Stevie cannot be held responsible for your travel or accommodation costs. Accessibility Accessibility – Workshops at Create Space, Wirksworth: Entrance to the Studio Gallery has 2 stone steps. The workshop table is fixed and also up one step, the main table is high, you will be stood or sat on a tall chair.  Please contact Stevie for information about the suitability of her courses for ages and abilities before booking. Health & Safety Stevie reserves the right to exclude any student we feel may be a danger to themselves or other students.

The course is designed to help improve your understanding of the legal requirements, the theoretical and practical principles for both the initial verification and certification of an electrical installation, further your knowledge and practical skills in the testing and inspection of a range of existing electrical installations, and help improve your understanding of the legal requirements, the theoretical and practical principles for the periodic inspect and testing and certification of an electrical installation.

NPORS Plant Loader Securer Training The NPORS plant loader securer training course is intended for delivery drivers who operate plant equipment to load on to delivery vehicles, additionally for workers who are responsible for securing the plant using various securing equipment. Unsafe loads on vehicles injure more than 1,200 people a year and cost UK businesses millions of pounds in damaged goods. There has been an increasing number of accidents involving mobile plant during loading/unloading or during transportation resulting in fatalities. In line with recommendations from the Safety of Loads on Vehicles from the Department Of Transport, the course will provide both theoretical and practical training to ensure candidates are able to carry out the duties of Plant Loader Securer. NPORS is an approved CSCS Partner Card Scheme, providing evidence that individuals working on construction sites have the appropriate training and qualifications for the plant loader securer duties. Furthermore, training criteria is based on the approved standards of the Construction Leadership Council. Visit our page; The Art Of Securing Loads Experienced operator – NPORS Plant Loader Securer Test Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Plant Loader Securer Experienced Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Plant Loader Securer Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS Plant Loader Securer Test is for operators who have received some form of training in the past or alternatively has been operating the Plant Loader Securer for several years. If you are unsure if you qualify to go down the test route please contact us to discuss this in more detail. Discounts are available for multiple bookings There are two parts to the plant loader securer test, a theory section comprised of 25 questions and a practical session. Plant Loader And Securer Course Objectives Plant Loader and Securer Training covers: Legislation: All relevant health and safety and current legislation and British Standards Loading: Load or guide items of plant onto a transporter. Position items of plant on the transporter to ensure no overloading of transporter axles. Ensure integrity and security of items of plant plus attachments using a range of restraining equipment Preparations: Prepare an area for the purposes of loading and unloading construction plant. Prepare a transporter for receiving different items of construction plant, which must include tracked, wheeled and roller types. Agree and give appropriate signals to the plant operator. Check equipment prior to operations Travel: Prepare a transporter for road travel. Ensure intended route of travel is compatible with load weight, width and height. Explain the specific requirements of current legislation for equipment designed for transporting construction plant. State the requirements to be undertaken when loading and unloading plant on the public highway. Plant Loader Securer Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of the loading and securing and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury, however this course must be on your site. With its own purpose-built practical training area to simulate an actual working environment. Our Loader Securer training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Plant Loader Securer Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. Who should take the Plant Loader Securer Training? This training is intended for delivery drivers operating plant equipment to load onto delivery vehicles and workers responsible for securing the plant using various securing equipment. 2. What does the Plant Loader Securer Training cover? The course covers legislation, load and guide items of plant, preparing areas for loading/unloading, securing equipment, preparing transporters for road travel, and ensuring compliance with safety requirements. 3. How long is the Plant Loader Securer Training? For novice operators, the training lasts 2 days. Experienced operators can take a 1-day test. 4. What certification do I receive upon completion? Participants receive an NPORS card, either the traditional card valid for 5 years or the NPORS card with CSCS logo, valid initially for 2 years. 5. Are there any prerequisites for the Plant Loader Securer Training? Candidates must have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. More courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today. For those looking for a “NPORS Plant Loader Securer Training near me,” our widespread operations make it convenient for you to access Vally Plant Trainings top-quality training no matter where you are in the UK

Level 3 Diploma in Supervising Licensed Asbestos Removal