596 Educators providing Code courses

Phoenix Pottery and Art Studio offer a Membership programme for experienced potters, with full use of the pottery studio. Alongside their regular pottery classes and courses. Situated in Golborne, near Warrington, St Helens, Wigan and with easy motorway access for the Northwest UK. Approx 20 miles from Manchester and Liverpool.

This advanced phlebotomy course will allow you to receive practical demonstrations and hands-on training as a part of the practical training to support your role. At the beginning of the session, you will be required to observe the experienced trainers and trained phlebotomists. You will learn how to smoothly draw blood, minimize hazards, and manage the patient’s reaction through a practical demonstration on a mannequin. Finally, under close supervision, you will get the opportunity to collect blood samples from other fellow colleagues.  Course Highlights Gain a Recommendation Letter from Your Supervisor Accredited by the CPD Certification Recognised and Valuable Certification Face-to-Face Practical Training Sessions Supervised by experienced phlebotomists Location & Class Schedule Venue Location Nr. 1: Bank Studio, 23 Park Royal Road, NW10 7JH You can select your preferred date from any of the following months: 14th, 21st, 28th May, 2025 20th, 27th May and 3rd June, 2025 22nd, 29th May, 5th June, 2025 3rd, 11th and 18th June, 2025 9th, 16th, 23rd June, 2025 15th, 22nd, 29th June, 2025 20th, 26th June and 3rd July, 2025 13th, 20th and 27th July, 2025 15th, 22nd and 29th July, 2025 23rd, 30th July and 3rd August, 2025 24th, 30th June and 4th July, 2025 Venue Location Nr. 2: 83-85 Hagley Road, Birmingham, B16 8QG You can select your preferred date from any of the following months: 15th, 22nd, 29th May, 2025 16th, 23rd, 30th May, 2025 2nd, 9th and 15th June, 2025 13th, 20th, 27th June, 2025 16th, 23rd June and 3rd July 2025 22nd, 26th June and 4th July, 2025 11th, 18th and 25th July, 2025 17th, 24th and 31st July, 2025 Venue Location Nr. 3: Pure Offices, Kembrey Park, Swindon, SN2 8BW You can select your preferred date from any of the following months: 17th, 24th, 31st May, 2025 14th, 21st, 28th June, 2025 13th, 20th and 27th July, 2025 16th, 23rd and 30th August, 2025 14th, 21st and 28th September, 2025 Venue Location Nr. 4: Filwood Community Centre, Knowle, Bristol BS4 1JP You can select your preferred date from any of the following months: 16th, 23rd, 30th May, 2025 12th, 19th and 26th June, 2025 17th, 24th July and 31st July, 2025 12th, 19th and 26th August, 2025 12th, 19th, 26th September, 2025 Venue Location Nr. 4: Glan-Yr-Ely, Ynysmaerdy, Pontyclun, Cardiff CF72 8LJ You can select your preferred date from any of the following months: 1st, 8th and 15th July, 2025 It can be tough to put your best foot forward in the job market with only online Phlebotomy training. Hence, our practical sessions will provide you with the required experience that your employers might want to see when you apply for the job. This advanced phlebotomy competency training is designed to give you an opportunity to practice, build confidence and gain valuable experience, which will help your professional career when you will apply for the job.  This extensive course covers the following credentials:  Practical demonstration Labelling tubes Blood-taking techniques Code of practice Safety protocols Needle safety techniques Processing of blood samples Prioritising patients Who is this Advanced Phlebotomy Training Course for? This advanced phlebotomy course is primarily aimed at:   Phlebotomists Health Visitors Physiotherapists Occupational Therapists Healthcare professionals Nurses, midwives, pharmacists and doctors Freshers looking to begin their career as a phlebotomist Anyone looking to enhance their blood-sampling skills Whether you are a fresher looking to kickstart your career in the field of phlebotomy or practising healthcare looking to enhance your phlebotomy skills, this course will help you achieve your professional aspirations by all means.   Aims and Learning Outcomes of this Advanced Phlebotomy Training Course  By the end of this advanced phlebotomy course, you will:  Know how to utilise proper safety precautions Assess a phlebotomist’s personal and professional attributes Accept the core roles and obligations of a phlebotomist Understand the code of conduct required to be followed by a phlebotomist Know how to draw blood using the right procedure Establish the process to handle venipuncture-related issues Understand how to handle and preserve blood samples safely Entry Requirements In order to attend the advanced phlebotomy course you need to complete our basic phlebotomy training course. However, it is open to students of all academic backgrounds. Assessment Method As part of the assessment, you will be required to execute a live blood draw and collection that will be closely supervised and marked by the experienced phlebotomist responsible for monitoring you.  Upon successful demonstration of blood sampling, you will be awarded a certificate of competency that is accepted by thousands of professional bodies and government regulators here in the UK and around the world. Recognised Accreditation This course is accredited by Continuing Professional Development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Certificate of Achievement Competency Certificate and Certificate of Achievement from Lead Academy You will receive a competency certificate after successfully completing the Part 2 of the phlebotomy course, which serves as confirmation that you are qualified to function as a phlebotomist without the need for close supervision. Also, on successful completion of the phlebotomy course, you will be eligible to obtain a CPD accredited PDF and Hardcopy certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy.

The Temporary Works Coordinator course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site. Course Objectives: By the end of the course, the delegate will gain knowledge of: The need for a temporary works co-ordinator The day-to-day roles of others involved in the temporary works procedures Risk assessments and method statements Best procedures as stated in BS 5975:2019 Course Content: The content covered by the CITB course includes: Various groups and types of Temporary Works Case studies, procedures and policies of Temporary Works BS5975:2019 CDM Regulations Legislation and relevant Codes of Practice Register for Temporary Works, design requirements and checks Standard solutions and guidance design documents Temporary works Co-ordinator – job role and responsibilities Assessment: To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training. Certificate: The certificate for this course is valid for 5 years. Instructions Please note all Temporary Works Coordinator courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago. Aims Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards. Instructions For online courses labeled “Remote Learning,” a tutor will deliver the training via video call. All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program. Additional attendee information will be provided via email. Please ensure you check your inbox.

Understanding commodity codes is vital to internationally trading businesses. Commodity codes are used worldwide to determine the customs duty and other charges levied on the goods when importing and exporting. They also determine any preferential treatments or restrictions and prohibitions that may apply to the goods and are used for monitoring trade volumes and applying international trade measures. This virtual half-day course will provide an insight into what commodity codes are and how getting them wrong can have a big impact on your business. By attending this course, we will ensure you: Are aware of what a commodity code is and what it is used for Understand the process of how to classify goods Successfully classify a range of goods Understand the importance of getting your commodity codes correct. Please note: If you are working towards your British Chamber of Commerce (BCC) Foundation Award, this course will count towards 1 of your 6 modules. Please make sure you select the ‘Yes’ option in the dropdown option for BCC when booking.

This is an International Driver CPC - 7hours course - Rules of the Road & Customer Service and it is suitable for LGV & PCV and will cover: Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedures, Company & Driver Image, Who Customers Are and What They Want, Communication Skills, Giving Good Customer Service. All courses start at 07:45 hrs and finish at 15:45 hrs All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes. Approval: This course is registered with JAUPT as approved for Driver CPC qualification. Course Approval Number: ICRS24736/475. On completion of the course, all attendees will receive a certificate of attendance. Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.

The Temporary Works Supervisor course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site. Course Objectives: By the end of the course, the delegate will gain knowledge of: Have gained an understanding of the importance of cooperation and teamwork on a temporary works site Understand the legal duties of the role Have a stronger awareness of risk management on-site as well as the roles of a supervisor and their fellow employees on site Leave the course with an understanding of the “4C’s”, Communication, Cooperation, Coordination and Competency Course Content: Different groups and types of Temporary Works BS5975:2019 CDM Regulations Legislation and Codes of Practice Temporary Works Register, Design Brief and Design Case studies, policy and procedures, Standard solutions and permitted drawings Risk assessments, method statements Safe systems of work The roles and duties of a Temporary Works Supervisor Assessment: To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training. Certificate: The certificate for this course is valid for 5 years. Instructions Please note all Temporary Works Supervisor courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

This is an International Driver CPC - 7hours course - Vulnerable Road Users and it is suitable for LGV & PCV and will cover: Where Do We Encounter VRU’s? Who Are the VRU’s? Sharing Road Space, Route Planning, New Traffic Systems, Professional Drivers Role, Hazard Perception, Defensive Driving, Blindspots, Vehicle Safety Systems, Cyclists, Pedestrians, Motorcyclists, Horse Riders All courses start at 07:45 hrs and finish at 15:45 hrs All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes. Approval: This course is registered with JAUPT as approved for Driver CPC qualification. Course Approval Number: ICRS5814/475. On completion of the course, all attendees will receive a certificate of attendance. Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

Join us for this exciting 3 day Introduction to Market Gardening course, with a chance to see three different approaches to vegetable growing and marketing.