550 Coach courses in London

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

12 Month complete preparatory programme for the US College experience; includes an Academic, Athletic, and Footballing syllabus.

2 day Leadership workshop * Pre workshop Leadership diagnostic analyses your current leadership behaviour and impact on business results * Workshop format includes Diagnostic report debrief & planning for change, Leadership Style, Creating and communicating Vision, Goal setting and commitment to achievement, Coaching & Developing Staff, Performance Management, Rewards and Recognition, Teamwork and Motivation, via simulations, discussion and your current real-world issues. *Leadership diagnostic re-measure after 6 months to quantify improvement, change etc.

Our team of Construction industry experts provide business management training for leaders and business owners across England and Scotland CONSTRUCTION INDUSTRY SPECIFIC Construction Business Growth Academy The Power Within Training is dedicated to helping construction-based business owners and construction management throughout England, Scotland, and Wales achieve more than they believed possible. Our construction business training is designed to develop owner-managers and help them create the future they want. To ensure business growth, we have a dedicated team of industry professionals to give unique support specific to the skills, traits, and challenges found within Construction. This programme was created to help you push and elevate your business to the next level. Contact us to register for our construction business training. Explore Our Construction Business Growth Course We created the Business Growth Academy for business owners like you to grow and develop their businesses in a more controlled and sustainable way. To ensure growth, our construction business training is a series of six training modules focused on business growth, leadership, and financial management. Most of our participants are business owners looking to get the tools needed to spend more time working on their business while generating more profitability to ensure consistent business growth. The Power Within Training uses the latest business growth strategies, which allow you to identify, modify and quickly implement our easy-to-follow business-building tools and techniques designed around the construction and property development industry. Whether you are a business owner or an aspiring construction and property development entrepreneur, our Construction Management Course will provide the tools and techniques to drive your business forward and achieve sustainable growth. Join us at the Business Growth Academy and unlock your full potential. The Goal of Our Construction Management Training Our goal with this training is to provide you with the tools you need to take control of your business. This allows you to use the latest strategies and ensure the smooth growth of your construction business. The construction management training we offer is a three-month course with new modules available twice monthly, delivered via Zoom or in person. These modules are designed to work around your schedule. After, you’ll have a 39-hour CPD certification thanks to our CITB skills & training courses. Overall, our fully funded construction management training will help you place the proper foundation, allowing you to build a more substantial and focused business that’s centred around constant growth and profits while future-proofing your business. BUSINESS GROWTH ACADEMY The Benefit of Our Business Growth Academy As you go through our training, you’ll delve into each module and the critical steps and tools. These include how to plan, organize, and control construction operations, all designed to provide you with a well-rounded view of your business. Not only will you get the tools you need to ensure your construction business growth, but you’ll also get access to benefits such as lifetime access to your online interactive training portal, entrance into a private social and professional networking group, pro bono coaching, and mentoring from industry experts and leaders. Here are some additional benefits of our construction management training: Register your interest today You’ll build a personalised 12-month business development plan that keeps you focused on high-value activities, ensuring you remain on track to grow. Tools and techniques to not only measure but also increase your profitability within your business. These tools help you ensure that you’re never leaving money on the table again. Learn, develop, and nurture self-management and leadership strategies that you can work on and in your business to help you from chasing your tail or burning out. You’ll develop unshakeable confidence in your business’s ability to grow and become the kind of entrepreneur that chooses the customers they want to work with, meaning customers who are driven by value, not by price. Gain valuable leadership and self-development skills, which encourage learning for life. Lastly, you’ll no longer wonder, “what if?” You’ll have the knowledge and understanding to keep unlocking and growing your business’s true potential. WHAT'S INCLUDED IN THE PROGRAMME Course Overview As we’ve mentioned, our business management course is designed to be completed over three months, with two courses being released monthly. These are designed to be done on Zoom or in person and are flexible around your busy schedule. Our modules were created to be easy to understand while providing the resources needed to elevate your construction business. Here is a more in-depth look at what to expect from our modules: Module 1: The C.O.D.E Breaker: The Business FundamentalsThis module will encourage you to deep dive into your why and break the business C.O.D.E. You’ll be shown the importance of knowing why you started the business, how you can build a business while remaining authentic, and what needs to be done to ensure you create and support a solid foundation moving forward. During this module, you’ll discover how to successfully build a business in the construction industry, from the fundamentals and foundations to the growth. Lastly, we’ll review your vision, values, and purpose, show why these are critical areas, and allow you to establish a real business for you and your customers. Module 2: Your M.E.N.T.A.L Agility: The Entrepreneurial Mindset With this module, we’ll focus on self-leadership and how you should constantly be developing the ‘inner game’ or minder and the ‘outer game’ or action. The inner game consists of intention, self-awareness, self-confidence, and self-efficacy. These must be used to achieve personal mastery, while the outer game consists of influence and impact. M.E.N.T.A.L. agility is your key to all success and failure, meaning that without leading yourself, you’ll never find business success. For us, your M.E.N.T.A.L. agility is made of five key components that enable you to transition from owning a business to thinking and planning like an entrepreneurial business owner. Module 3: The T.I.M.E Multiple: Working ON or Working IN The point of this module is to help you understand that you can’t manage your time; you can only manage your use of time or your self-management skills. It’s vital to have strong self-management skills to be more successful at work. We’ll explore ways to help maximise your time and identify your High Payoff Activities. The T.I.M.E. multiplier is about accepting that you cannot do everything yourself. Instead, it would be best if you focused on your high-payoff activities. Our goal is to teach you to say it’s okay to say no. We’ll show you the importance of recognising the significance of all your decisions. Along with that, we focus on unique planning and defining processes to bring the future into the present. Module 4: The Business P.R.O.B.E: The Numbers Game Understanding your finances is essential as it allows you to make informed decisions that have the potential to make significant impacts on your business, growth, and even your bottom line. We want you never to leave money on the table again. When you know the difference between markup and margin, fixed and variable costs can make the difference between owning a business and the business owning you. Understanding your business numbers will increase your revenue and profitability and even grow your business. Module 5: High-Performance T.E.A.M.S: The Well-Oiled High-performing teams are more than a group that works together. A high-performing team has clear priorities and purposes and shares an understanding of how each team member or subcontractor prefers to approach work. The foundation of a high-performing team or business starts with trust. The development starts with creating an environment where leaders and team members can openly disclose which strengths they feel they bring to a team and what support they need to be their best selves. Truth is that all people’s problems directly reflect the business owner’s leadership and management. When a team doesn’t do things your way, they probably have no idea what your way is. Module 6: G.O.A.L.S: Setting & Defining the Accountability System Everyone works best with clearly defined goals, from completing a refurb on a budget or growing your construction business to over 10M annual profit. Remember the old saying, through a goal with a plan, is just a wish! We’ll teach you our tried and tested process for setting and achieving your objectives by focusing on what matters most. Reviewing your daily, weekly, and monthly goals, we can help you make high performance a habit. Best of all, you’ll create a detailed 12-month business development plan to get your personal and professional goals moving in the right direction. Meet the Construction Business Training Presenters Derrick Matheson: Training and Development Director and Trainer of Business Growth Academy A seasoned business owner, Derrick understands the challenges UK construction and property development professionals face. We have crafted a targeted program that simplifies growth, empowering entrepreneurs with easy-to-implement strategies.  Derrick’s mission is simple: to empower and equip ambitious entrepreneurs and professionals with the tools and knowledge necessary to thrive in today’s competitive market. The Business Growth Academy is a testament to his dedication, offering an innovative, step-by-step business-building process that demystifies the complexities of growth and unlocks the full potential of your enterprise. Stuart Mason: BGA’s Bold Training Manager, Lead Trainer, and Author of “How To Wreck Your Business Stuart, the fearless BGA Training Manager and Lead Trainer has turned his business failures into powerful lessons for others. As the author of “How To Wreck Your Business,” Stuart shares his hard-earned wisdom to help business owners avert the same pitfalls that led to the demise of his own company on its 20th anniversary. Stuart’s approach is refreshingly direct and unapologetically abrupt, cutting through the noise to deliver real-world insights that make a difference. Don’t expect a dry lecture on business theory from a dusty textbook; instead, Stuart offers a ‘streetwise’ perspective that is both practical and actionable, pushing you to uncover the answers that will make your business shine in a competitive market.

An instructor-led leadership learning programme based on emotional intelligence and social neuroscience, designed to boost leadership 'PowerSkills.' A practical programme that provides leaders with a learning journey that equips them with the tools and techniques to connect, empathise, communicate effectively, build employee engagement and influence.

The RQF Level 3 Outdoor First Aid Course is designed for individuals engaging in outdoor activities, offering advanced training in managing emergencies specific to outdoor environments. Here's a concise overview: Specialised Training: Tailored for outdoor enthusiasts, professionals, and leaders involved in remote outdoor activities or expeditions. Comprehensive Skills: Covers assessing and managing injuries, trauma care, medical emergencies, and evacuation procedures relevant to outdoor settings. Scenario-Based Learning: Simulated outdoor emergencies, providing practical application of skills in realistic scenarios encountered during outdoor pursuits. Remote Environment Preparedness: Emphasis on handling emergencies where immediate medical assistance might be limited, focusing on adaptability and resource utilisation. Hands-on Training: Practical sessions demonstrating wilderness-specific first aid techniques, including the use of specialised equipment. Communication and Decision-making: Training in effective communication and teamwork during outdoor emergencies, fostering quick and coordinated responses. This course equips outdoor enthusiasts, guides, and professionals with advanced first aid skills, preparing them to manage a wide array of outdoor emergencies in remote or challenging environments. Suitability - Who should attend? The RQF Level 3 Outdoor First Aid Course is suitable for: Outdoor Enthusiasts: Hikers, climbers, campers, and adventurers seeking skills to manage emergencies during outdoor pursuits. Professional Guides: Outdoor leaders, expedition leaders, and instructors responsible for group safety during outdoor activities. Workers in Remote Environments: Forestry workers, park rangers, and those working in remote or wilderness settings where immediate medical help might be limited. Sports Coaches: Coaches involved in outdoor sports or activities requiring knowledge of first aid in outdoor environments. Volunteers and Community Members: Individuals participating in community-based outdoor programs or volunteering in remote areas. Professionals with Outdoor Responsibilities: Individuals whose roles involve outdoor responsibilities and the need for advanced first aid skills in such settings. It's ideal for anyone seeking to enhance their ability to respond to outdoor emergencies where access to immediate medical assistance is limited. Outcome / Qualification etc. The outcomes of completing the RQF Level 3 Outdoor First Aid Course include: Advanced First Aid Skills: Proficiency in managing a broad range of outdoor-specific injuries and medical emergencies encountered in remote settings. Confidence and Preparedness: Enhanced confidence to assess, manage, and provide first aid in challenging outdoor environments. Scenario Adaptability: Ability to adapt first aid skills to diverse outdoor scenarios and make informed decisions in remote or adverse conditions. Effective Communication: Improved communication and teamwork skills essential for coordinating responses to outdoor emergencies. Emergency Preparedness: Understanding evacuation procedures, resource improvisation, and utilising outdoor-specific first aid equipment. Certification: Attainment of an accredited qualification demonstrating competence in outdoor first aid management. Completing this course ensures participants are well-equipped to respond competently and effectively to a wide array of outdoor emergencies. Training Course Content UNIT 1 OUTDOOR EMERGENCY ACTION Module 1 Introduction Module 2 What is outdoor first aid? Module 3 First aid equipment Module 4 Summon assistance Module 5 Monitoring Module 6 Scene survey Module 7 Primary survey Module 8 Secondary assessment Module 9 Resuscitation and AED Module 10 Disorders of respiration Module 11 Wounds and bleeding Module 12 Hypovolaemic shock UNIT 2 OUTDOOR INCIDENT MANAGEMENT DAY 2 Module 1 Incident management Module 2 Bones, joints and muscle injuries Module 3 Head and spinal injuries Module 4 Chest and abdominal injuries Module 5 Major illnesses Module 6 Anaphylaxis Module 7 Extreme heat and cold Module 8 Burns Module 9 Eye injuries Module 10 Poisoning Module 11 Bites and stings Module 12 Written assessment and course closure Course delivery details The delivery of the RQF Level 3 Outdoor First Aid Course typically involves a combination of: Classroom Sessions: In-person training covering theoretical aspects of outdoor first aid, including lectures, discussions, and presentations. Practical Workshops: Hands-on sessions allowing participants to practice first aid skills specific to outdoor scenarios, utilising equipment and simulations. Outdoor Simulations: Realistic scenario-based training in outdoor environments, replicating emergencies encountered during outdoor activities. Interactive Learning: Engaging activities, group exercises, and case studies to reinforce learning and encourage interactive participation. Qualified Instructors: Training facilitated by experienced and certified outdoor first aid instructors knowledgeable about outdoor emergency management. Assessment and Certification: Evaluation of skills and understanding through practical assessments, quizzes, or examinations leading to certification upon successful completion. This mixed approach ensures a comprehensive understanding and practical application of first aid skills tailored for outdoor settings. Why choose Madeleys First Aid Plus Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU Won FSB Best start-up business in the West Midlands in May 2023 Now trained 100's of delegates in Physical and Mental Health First Aid Expenses Travel costs and lunch required, there are many cafes and sandwich bars here in Much Wenlock to buy your lunch, you may eat it in the training room. All training material, books, qualification certificates are included in the price Continuing Studies After completing the RQF Level 3 Outdoor First Aid Course, individuals may pursue further studies or complementary training, including: Advanced Outdoor First Aid Courses: Specialised courses focusing on specific aspects like wilderness trauma, advanced rescue techniques, or extended wilderness medical training. Wilderness Medicine Certification: Advanced programs offering in-depth knowledge in wilderness medicine, ideal for those aiming for higher expertise in outdoor medical care. Leadership and Outdoor Education Courses: Studies in leadership, outdoor education, or adventure sports coaching, complementing first aid skills for leadership roles in outdoor settings. Specialised Rescuer Certifications: Training in technical rescue skills, rope rescue, water rescue, or other specialized rescue techniques relevant to specific outdoor activities. Medical Certification Programs: Pursuing medical certifications or courses in emergency medicine, paramedicine, or healthcare, enhancing medical expertise for outdoor settings. Continued education allows individuals to deepen their understanding, broaden their skill set, and specialise further in managing emergencies in diverse outdoor environments

RSPH level 2 Identifying and Controlling Food Allergy Risks Training Course Do you need an allergy trainer to come to your food business and teach your staff face to face about food and drink allergens, their dangers and how to control them? Our allergy trainer can come to your business and deliver this course at your business premises. Although we are based in London, we are happy to travel and deliver this course at your business location. (Trainer travel fees may be applicable depending on your location). Staff will receive interactive training and coaching on allergens and intolerances with an experienced trainer. We can also tweak the training to include issues you would like to cover. See our website for more details. Special offer for on-site allergy training. £250 plus £20pp includes RSPH exam fees (usually £350 plus £30pp) This course is suitable for any catering business such as restaurants, pubs, hotels, cafes, catering companies, cooks, self employed, artisans, event caterers and more. This course is also important for staff who are Front of House, who take customer orders and relay the orders to cooks and chefs and other people who are preparing food for customers who have allergies and or intolerances. This is a short one day training course, typically 9am-3pm. Topics covered include- Allergens, Allergen Identification, Cross contact, Cross Contamination, Allergic Reactions, Food Intolerances, Coeliac, Anaphylaxis, Natasha's Law, UK Food Safety Regulations, Allergy Controls, Substituting ingredients, Customer Communication and what to do in an Emergency. Contact us to book training.

RQF Level 2 First Aid for Youth Mental Health course The RQF Level 2 First Aid for Youth Mental Health course is designed to provide participants with a deeper understanding of youth mental health issues and equip them with the knowledge and skills to provide effective support to young people experiencing mental health challenges. The course covers a range of topics related to youth mental health, including common mental health conditions, risk factors, early intervention strategies, and support resources. Here are some key components typically covered in the RQF Level 2 First Aid for Youth Mental Health course: Understanding Youth Mental Health: Participants will gain an understanding of the unique mental health challenges faced by young people, including the impact of developmental stages, societal influences, and peer pressure. They will learn about common mental health conditions that affect youth, such as anxiety, depression, self-harm, eating disorders, and substance abuse. Recognizing Signs and Symptoms: Participants will learn to recognize signs and symptoms of mental health issues in young people. They will explore the behavioural, emotional, and physical indicators that may suggest a young person is experiencing distress or mental health difficulties. Providing Initial Support: The course will cover strategies for providing initial support to young people in crisis or distress. Participants will learn how to approach and engage with young people, offer active listening, and provide appropriate reassurance and guidance. They will also explore strategies for managing challenging or sensitive conversations related to mental health. Promoting Positive Mental Health: Participants will gain insights into promoting positive mental health and well-being in young people. This includes exploring protective factors, resilience-building techniques, and strategies for fostering a supportive and inclusive environment. Referral and Signposting: The course will emphasize the importance of early intervention and appropriate referral pathways. Participants will learn how to signpost young people to relevant support services, resources, and professionals who can provide further assistance. Self-Care and Boundaries: Participants will be encouraged to prioritise their own well-being while supporting young people with mental health challenges. They will learn about self-care strategies, setting boundaries, and seeking support for themselves as they engage in helping others. Interactive Activities and Case Studies: The course often includes interactive activities, discussions, and case studies to facilitate practical learning and application of knowledge. These exercises enable participants to develop their skills in a supportive learning environment. Successful completion of the RQF Level 2 First Aid for Youth Mental Health course typically leads to the awarding of the Level 2 qualification. It is important to note that this course does not provide participants with the qualifications to diagnose or treat mental health conditions, but it equips them with the knowledge and skills to offer initial support and signposting to young people in need. Suitability - Who should attend? The RQF Level 2 First Aid for Youth Mental Health course is primarily aimed at individuals who work or have regular contact with young people aged 8 to 18 years old. This can include professionals, volunteers, or anyone else who has a role in supporting young people's mental health and well-being. The course is relevant for a wide range of individuals and professions, including but not limited to: Teachers and educators Youth workers Social workers School counsellors Sports coaches Healthcare professionals (such as nurses, paramedics, and allied health professionals) Community workers Volunteers in youth organizations Parents or caregivers Those with a general interest in youth mental health and well-being The Level 2 First Aid for Youth Mental Health course aims to equip participants with the skills and knowledge to provide initial support to young people experiencing mental health difficulties. It focuses on developing an understanding of youth mental health, recognizing signs and symptoms, offering appropriate support, and guiding young people toward further professional help. Ultimately, the course aims to empower individuals to be better equipped in providing immediate assistance and promoting positive mental health outcomes for young people. Outcome / Qualification etc. Upon completing the RQF Level 2 First Aid for Youth Mental Health course, participants can expect to achieve several learning outcomes. Understanding Youth Mental Health: Participants will gain knowledge about common mental health issues affecting young people, including anxiety, depression, self-harm, eating disorders, and substance misuse. They will develop an understanding of risk factors, protective factors, and the impact of mental health on young people's overall well-being. Recognizing Signs and Symptoms: Participants will learn to identify early signs and symptoms of mental health problems in young people. They will understand how mental health difficulties can manifest and affect different aspects of a young person's life, such as behaviour, emotions, and social interactions. Providing Initial Support: Participants will acquire skills to provide initial support to young people experiencing mental health issues. They will learn active listening techniques, non-judgmental communication, and how to create a safe and supportive environment for young people to share their concerns. Promoting Positive Mental Health: Participants will understand the importance of promoting positive mental health and well-being in young people. They will learn strategies to enhance resilience, self-esteem, and coping skills among young people, as well as ways to create supportive environments that contribute to positive mental health outcomes. Signposting to Professional Help: Participants will gain knowledge about appropriate professional resources and services available to support young people's mental health. They will learn how to effectively signpost young people to appropriate help, such as mental health professionals, helplines, or support organizations. Self-Care and Boundaries: Participants will understand the importance of self-care and maintaining boundaries when supporting young people's mental health. They will learn techniques to manage their own emotional well-being and seek appropriate support for themselves when needed. The course aims to equip participants with the skills, knowledge, and confidence to provide immediate support and signpost young people to appropriate help. While it does not qualify participants as mental health professionals, it enhances their capacity to play a supportive role in promoting positive mental health outcomes for young people. Training Course Content Module 1 Introduction Module 2 What is first aid for youth mental health? Module 3 Identifying mental health conditions Module 4 Stress Module 5 Mental health conditions Module 6 First Aid Action Plan for Mental Health Module 7 Assessment and course closure MODULE 1 INTRODUCTION Session content Trainer/assessor introduction Learner introductions Course information • Administration • Learning outcomes and assessment criteria • Reasonable adjustment • Certification • Complaints and appeals • Assessment information Session duration 15 minutes MODULE 2 WHAT IS FIRST AID FOR YOUTH MENTAL HEALTH? Session content Definitions Role and responsibilities of a first aider The impact of mental health issues Mental health stigma Statistics Session duration 30 minutes MODULE 3 IDENTIFYING MENTAL HEALTH CONDITIONS Session content Mental health continuum Mental health risk factors Early warning signs Session duration 30 minutes MODULE 4 STRESS Session content What is stress? Causes of stress Effects of stress Coping strategies Session duration 30 minutes MODULE 5 MENTAL HEALTH CONDITIONS Session content Depression Anxiety Psychosis Eating disorders Suicide Self-harm Post-traumatic stress disorder Conduct disorders - Bullying Drugs and alcohol Session duration 125 minutes MODULE 6 FIRST AID ACTION PLAN FOR MENTAL HEALTH Session content Check for significant risk of suicide or harm Apply non-judgemental communication skills Reassure and provide information Encourage professional support and self-help strategies Consent and safeguarding The first aider’s own health and emotions Assessment Scenario – Application of the first aid action plan for mental health Session duration 90 minutes MODULE 7 ASSESSMENT AND COURSE CLOSURE Session content Written assessment paper Course administration Course closure Session duration 40 minute Course delivery details The delivery of the RQF Level 2 First Aid for Youth Mental Health course may vary depending on the training provider. However, here are some common methods and approaches used in the course delivery: Classroom-Based, or virtual Instruction: The course often involves attending face-to-face training sessions in a classroom setting. An experienced instructor or facilitator will lead the sessions, providing lectures, presentations, and discussions on the relevant topics. Participants will have the opportunity to interact with the instructor and fellow learners, ask questions, and engage in group activities. Interactive Learning: To enhance understanding and engagement, the course may incorporate interactive learning methods. This can include group discussions, case studies, role-plays, and simulations. These activities allow participants to apply their knowledge and skills in practical scenarios related to youth mental health. Multimedia Resources: Training providers may utilize multimedia resources to enhance the learning experience. This can include videos, audio recordings, and online resources that provide additional information, real-life examples, and testimonials related to youth mental health. Practical Skills Training: The course may include hands-on training in practical skills related to supporting young people with mental health challenges. Participants may learn and practice active listening techniques, crisis de-escalation strategies, and effective communication skills. Practical exercises and simulations can help participants develop confidence in applying these skills. Case Studies and Scenarios: The course may incorporate real-life case studies or scenarios to illustrate the application of knowledge and skills. Participants may analyze and discuss these cases, identify appropriate intervention strategies, and explore different approaches to supporting young people in various mental health situations. Assessments: To demonstrate understanding and competence, participants may be required to complete assessments or evaluations. These can include quizzes, written assignments, or practical assessments where participants demonstrate their skills in responding to youth mental health scenarios. Duration and Schedule: The duration of the course can vary, ranging from a few hours to multiple days, depending on the training provider. It may be offered as a full-time or part-time program, and the sessions may be conducted during weekdays or weekends to accommodate different schedules. Why choose Madeleys First Aid Plus Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU Won FSB Best start-up business in the West Midlands in May 2023 Now trained 100's of delegates in Physical and Mental Health First Aid Expenses Travel costs and lunch required, there are many cafes and sandwich bars here in Much Wenlock to buy your lunch, you may eat it in the training room. All training material, books, qualification certificates are included in the price. Continuing Studies After completing the RQF Level 2 First Aid for Youth Mental Health course, you may consider several options for continuing studies or professional development in the field of youth mental health. Here are a few potential avenues to explore: Advanced First Aid Courses: If you wish to further enhance your first aid skills, you can explore advanced first aid courses that specialize in mental health. These courses may provide more in-depth knowledge and practical skills in supporting individuals with specific mental health conditions. Mental Health Awareness Courses: To broaden your understanding of mental health across different age groups or specific mental health conditions, you can consider enrolling in mental health awareness courses. These courses provide comprehensive knowledge about mental health, its impact, and strategies for support. Youth Work and Counselling Courses: If you are interested in pursuing a career in youth work or counselling, you might consider enrolling in relevant courses or qualifications. These can provide a deeper understanding of therapeutic approaches, counselling techniques, and effective interventions for working with young people facing mental health challenges. Higher Education Degrees or Certifications: If you're looking for more extensive education and professional credentials, you can explore pursuing higher education degrees or certifications in fields related to mental health, psychology, counseling, or youth work. These programs often offer specialized tracks or modules focused on youth mental health. Continuous Professional Development (CPD): Engaging in ongoing professional development opportunities is essential for staying up to date with the latest research, practices, and approaches in youth mental health. You can attend workshops, conferences, webinars, and seminars that specifically focus on youth mental health and related topics. Volunteer and Practical Experience: Actively volunteering with organizations or programs that support youth mental health can provide valuable hands-on experience and further develop your skills. Volunteering opportunities allow you to work directly with young people and gain a deeper understanding of their mental health needs. Remember to research and choose reputable and recognized training providers or institutions when considering any further education or professional development opportunities. It's important to align your studies with your career goals and interests while ensuring the courses or programs meet industry standards and requirements.

Self-understanding is a prerequisite for leading and managing others responsibly and honourably. The field of Neuro Linguistic Programming has helped us to gain a better insight into how we all think and behave. Upon completion of this course participants will be able to: Gain an insight into the purpose and functions of the unconscious mind Develop flexibility to increase their for behaviours in different circumstances Appreciate how different people experience the world Create and set effective goals and direction Understand the NLP Model of Communication Adapt their communication style to maximise effectiveness Influence and persuade others by connecting with people Understand how empowerment can make life easier Appreciate how creativity works Learn creativity techniques to tap into the power of the team 1 Self-awareness Autopilot - your unconscious mind Developing flexibility How identify, values & beliefs shape our behaviour Models of the world 2 Creating direction Describing present and desired state Designing your direction Making it happen Self-mastery 3 Communication The NLP Model of Communication Insights to the way people think Understanding representation systems Reframing the way people think about negative experiences Using metaphor 4 Influence and persuasion Building trust Connecting with people Purpose intention and outcomes The difference empowerment makes 5 Creativity and innovation Hindrances to creativity and innovation Your natural state of creativity Getting unblocked Creativity techniques 6 Action plan Course summary and presentation of action plans

At some point in your life you will have attended a training course or workshop, but what happens when you are asked to deliver one? Some people relish the opportunity while others are challenged by it. Whatever you feel about training others, it is a skill that is admired and can be studied and learned. With the trainer you will be learning the techniques, skills and understanding you need and you will have the chance to deliver a short training session to others, receive feedback and having the confidence to deliver it for real in your job. The training will comprise one day followed by a half day when all those able to attend will deliver and have feedback on a 20 minute training activity. To be able to create and maintain an environment conducive to learning and engagement To understand basic learning theory and practice and the difference between training, facilitating and learning To understand how adults learn and how to apply it as a trainer To be able to plan and deliver a training activity using the appropriate set of skills and behaviours To be able to review and evaluate learning and identify how outcomes are met To manage the learning process and the participant engagement in the training environment To be able to present effectively and appropriately to a variety of audiences To deliver and receive feedback on a short delivered training activity with peers To review and evaluate learning and have an action plan to take back and put into practice DAY ONE (full-day) 1 Welcome, housekeeping, how the day will be run Introductions (and making the most of them) Warm up - breaking the ice followed by review and feedback Creating an environment conducive to learning and engagement; managing expectations well as a trainer Group task with feedback and review in plenary 2 What is training and how do adults learn? Trainer input: David Kolb's Learning Cycle Group tasks 3 How to plan a session and what to include - trainer input Starting at the end and working backwards Linking outcomes to purposeful activities Practice task and planning time for day two using a template 4 The skills and behaviours of a brilliant trainer Modelling skills and behaviours Creative task and discussion 5 Mini reviewing task De-brief - using reviewing in training 6 How to manage the process Trainer input followed by practice Paying conscious attention to language (verbal and non verbal), feelings and responses in the room and managing yourself as a trainer 7 The trainer's toolkit #1 Key tools, materials and templates Choosing different tools and approaches with different audiences Know your audience 8 The trainer's toolkit #2 Key tools, materials and templates continued Addressing trainer good practice 9 Review, evaluation and action planning activities Why and what should we be evaluating and why it's important Action planning task Group review task DAY TWO (half-day) The day will comprise a series of 30 minute timed sessions where each delegate will present and deliver a training activity with the group. The training activity will be prepared and planned in advance and will take 20 minutes (+ or - 2 minutes) to deliver in real time. This will be followed by review and feedback from the trainer and peers to complete the total of 30 minutes as a time slot. Reiteration of the task and discussion can take place with the trainer if needed, and there is time included in Day One to support the training planning.