40 City & Guilds courses

Launch your Detailing Career Combining two of our syllabus levels into a 5-day period, this course has been specially created to accommodate those travelling from further afield, and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed one-week 'master detailer' courses in principle, there's just too much information in a short space of time. However, we recognise that, for some, the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification. For more information on the syllabus of both courses, please read through the full course description below. Notes: Mondays are the only start day available online as this is a 5-day course. If you need to start on another day due to travel and run over into the following week, please contact us to discuss. To book this course using Paypal Credit, please contact the office as it exceeds the advertised maximum payment limit, which we can then negotiate. Combining two of our syllabus levels into a 5-day period, this course has been specially listed to accommodate those travelling from further afield and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed 5-day 'master detailer' courses in principle. However, we recognise that for some the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification.   The aim of Level One is ideal for those just about to, or have recently entered the detailing industry, or those who wish to reset and refresh their skills. the aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. Along the way topics covered will be: Washing stages Wash media Environmental considerations Drying methods Bonded contamination and its removal Wheel care and maintenance Glass and hard surfaces Engine bay cleaning Vulnerable surfaces Efficiency and process PPE and safety Clothing and working practices Risk assessment Chemical knowledge Van set-ups Interior detailing Leather and soft surface care Fillers/glazing Dual action machine polishers intro Minor defect identification Paint types LSPs Final presentation Marketing Conflict resolution and customer care Financing Insurance Pricing and quotes Business Administration Memberships Social Media Manual handling Safe working practices Pre-work inspection Level 2 Following your introduction skills learnt in Level One you will be progressing onto more advanced machine polishing and cleaning techniques. Machines introduced at this level include forced rotation dual action polishers, every inception of Dual action polishers, both in throw and size. We'll also look at pad types, heavy cutting options and defect identification to assess what can be rectified and how. Interiors are explored in greater depth with higher yield services with dry steam cleaning, odour removal, leather protection and treatment, and stain removal with the associated chemistry. • Pad types • Compound grades • Rubber and plastic protection • Coatings after-care • Polymer and PTFE exterior LSPs • Glass sealants • Troubleshooting • Accreditations • Financial management • Insurance • Marketing • Pricing • Spot Sanding • Targeting your customer base • Safe working practice • Workshop planning • Intermediate chemical knowledge • Efficiency and time management • Matt finishes • Environmental considerations • Advanced cleaner chemistry • Bonded overspray and concrete • LSPs • Engine bay detailing • Plastic trim restoration • Odour removal • Steam cleaning • Stain removal & chemical principles • Fabric and leather protection • Paint types and their principles • Long and short throw DA machines • Forced action machines • Lighting • Defect identification All levels are accompanied by a full course booklet to revisit topics covered when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over the period of 3 months to cement the knowledge. There is then an externally assessed online exam, to ensure there are no weaker/problem areas and to assess the candidate's knowledge. After which the Level One and Two accreditations are awarded and you can either progress or choose to practice the skills gained with ongoing support. We would again stress that, if able to attend both courses separately, candidates are likely to better retain the information delivered. However, if logistics are a challenge, then this is the ideal course to get your detailing career started.   Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Choose what you want to learn in this fast-track hairdressing course. Aimed at those who’ve left college with a hairdressing qualification but don’t feel confident enough on the salon floor or those needing to brush up on a specific skill. Our training concentrates on cutting, colouring, styling and barbering.

Level Three, the final learning stage of our professional development courses, aims to bring you to the highest standard of advanced detailing skill through the spectrum of; rotary polisher techniques, wet sanding by machine and refinement, a full understanding of SMAT and DAT polishes and compounds and their role in efficiency and correction on different paint types, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined, demonstrated and explained. Level Three aims to bring you to the highest standard of advanced detailing skill, through the spectrum of rotary polisher techniques, wet sanding by machine, a full understanding of SMAT and DAT polishes and compounds, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined and explained. • DAT/SMAT technology • Pneumatic polishers and sanders • Advanced Dual Action technique • Rotary machine polishers • Glass polishing • Wheel removal • Under-arch cleaning • Cleaner chemistry • Time management and planning • Trim and seat removal • In-depth interior detailing • Cloth types • Advanced Dual Action technique • Rotary machine polishers • Mini/nano machine polishers • Wet-sanding • Advanced pad types • GRP, carbon and insulative substrates • Badge and trim removal • Texture levelling • Show preparation • Ceramic coatings • Polymer coatings • Coating troubleshooting • Coatings after-care • Fillers and glazes for show finishes • Business management • Business administration • Safe working practices • Safe vehicle lifting - ramp/jacking • Workshop planning • Advanced chemical knowledge • Risk assessments • Gloss meter usage • PPE • Employee management Following completion of training and ongoing assessment, case studies and exercises will lead to the level three exam and, upon grading, award of our advanced detailing Level 3 Detailing. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Completion of Level 2 Refreshments or Lunch Refreshments included

THE NVQ HAS NO SET DATES. ONCE REGISTERED YOU WILL BE ENROLLED ON THE SYSTEM WITH COMPLETION TIMES BELOW What is an NVQ? An NVQ is a competence-based qualification. The qualification is an International recognised work-based qualification. Once qualified, it will demonstrate to employers that you are skilled and able to perform well in your role at work. This is where you will be able to demonstrate your ability at work and complete a list of job knowledge questions regarding the units in your qualification. It is the candidate’s responsibility to engage with the Assessor and gather the evidence that will match the assessment criteria in your NVQ.   How can the candidate gather the onsite/work evidence and job knowledge questions? Risk Assessment Method Statement Drawings Materials Measuring, Cutting, Positioning, and securing in place what you are installing.   Methods of ways of gathering evidence - Videos – this will be the candidate setting up their video and then demonstrating their skills and ability on site and then upload to the candidate’s portfolio. On site assessment - where your assessor will come out to you and observe you demonstrating your skills. This will depend on the site location and assessors’ location. If the site location is too far for the assessment to take place, it will be solely video evidence. Your Assessor will instruct you on how to complete your videos. Witness testimony - your Assessor will hold a recorded discussion with your manager/supervisor to confirm where, when and how you have completed the work to the specifications. Photos – They can be used as part of an assessment. They will not be accepted if the candidate isn’t in the photo. Photos cannot be used to build up a portfolio but can be used as part of the videos showing the full completed job and also in the Assessors on site assessment observation report.   Job Knowledge Questions account for 65% of the NVQ qualification. These can be saved to your computer and typed as this will be the quickest and easiest route or you can print them out and hand write them. They are very important, and they are written to see if you have the knowledge behind what you are doing on site or at work. The questions are all relevant to the work that you do.   What is the process? Speak to sales - billy@citytraining.com or 0300 373 3337 Complete the City Training Group Registration Form A copy of your photographic ID (Passport or Driving Licence) Once enrolled on the NVQ, your Online portfolio (Quals Direct) and certificate of registration will be set up. You will receive an email from the online platform with your username (your email address) and password. Arrange with your Assessor to complete your Induction. Complete your knowledge questions. Arrange with your Assessor your site assessment. Assessor will contact your Manager/Supervisor for a testimony. Recorded Professional Discussion with you to confirm your ability and authenticate your portfolio. Cost – Level 2 - £750 + Vat. If you would like to add an additional pathway, they would be £300 each added pathway. Level 3 - £950 + Vat. If you would like to add an additional pathway, they would be £300 each added pathway. Time Scale of the NVQ? The NVQ is candidate led. This will depend on how committed the candidate is and how much work the candidate has lined up. Your Assessor cannot complete you without the evidence. For a level 2, we aim to have the candidate completed in 4 – 8 weeks, Level 3 from 4 – 12/16 weeks

Learn a new service for your business Colourlock is one of the world's largest leather care and repair manufacturers, supplying OEM end leather solutions from the factory to the end user and repair solutions for professionals. Renowned the world over for the quality and expertise of their leather training program their knowledge and support are unrivalled and Colourlock currently has a presence on every continent. UK Detailing Academy is proud to be the exclusive training provider for Colourlock's Accredited Leather Technician course in the UK for both leather repair and the Top Life 2-year leather protection coating.   This three-day training event will take you through all steps of leather repair, from cleaning and assessment, to repair of scuffs and tears and in-house colour matching. This course will give you the skills and confidence to complete leather repairs and recolouring on all types of vehicles, with ongoing technical support for as long as you need it. Once complete your business can then become part of the Colourlock Accredited leather repair network and have the confidence to complete live leather repairs on customer vehicles. Optionally available as part of the course is the Colourlock master kit, to give you the tools and materials to complete repairs and the colour system to custom blend paints. This can be purchased below at the time of booking at a discounted rate to take with you on the last day of your training. If no dates are showing as available in the calendar, you can sign up for updates to find out when new dates are released and new course developments.   Colourlock is one of the world's largest leather care and repair manufacturers, supplying OEM end leather solutions from the factory to the end user and repair solutions for professionals. Renowned the world over for their quality and the expertise of their training program their knowledge and support are unrivalled and Colourlock currently has a presence on every continent. UK Detailing Academy is proud to be the exclusive training provider for Colourlock's Accredited Leather Technician course in the UK for both leather repair and the Top Life 2-year leather protection coating. This three-day training event will take you through all steps of leather repair, from cleaning and assessment, to repair of scuffs and tears and in-house colour matching. This course will give you the skills and confidence to complete leather repairs and recolouring on all types of vehicles, with ongoing technical support for as long as you need it. Once complete your business can then become part of the Colourlock Accredited leather repair network and have the confidence to complete live leather repairs on customer vehicles. Leather repair should be your first choice as an additional new income stream for your detailing business. With more vehicles than ever being fitted with leather interiors as standard, leather repair is in high demand, and can add a valuable secondary workflow. It's simple to learn, easy to practice, requires low start-up costs, helps you stay ahead of the competition, and adds an upsell option to existing clients to complete every job under one roof. Optionally available as part of the course is the Colourlock master kit, to give you the tools and materials to complete repairs and the colour system to custom blend paints. This can be purchased in advance at the time of booking at a discounted rate to take with you on the last day of your training.     Course Length 3 Days (0930 - 1600) Group Size Up to 5 people Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Enhance your valeting team's skills for high-quality results. Valeting for Business Stage 2 follows on from Stage 1 by going into deeper levels of preparation and decontamination and introducing machine polisher enhancement and minor correction to their skillset. perfect for attending to used and re-sale vehicles, maintenance of higher use fleets, and new cars which arrive in need of a little extra work prior to handover. Get your valeting team to a standard to deal with minor paint defects, interior issues, and machine polishing work in-house - both hyper-efficiently and safely. Enhance your team's skills for high-quality results your customers will love. Valeting for Employees Stage 2 follows on from Stage 1 by going into deeper levels of preparation and decontamination and introduces machine polisher enhancement and minor correction to their skillset. Perfect for those attending to used and re-sale vehicles, maintenance of higher use fleets, and dealerships delivering new cars which can arrive in need of a little extra work prior to handover. Get your valeting team to a professional standard to deal with minor paint defects, interior issues, and machine polishing work in-house - both hyper-efficiently and safely. The course day includes; Health and safety discussion and a run-through of vital inspections and checks prior to work. Advanced chemical and decontamination skills and knowledge. Pre-polishing preparation - clay bars, solvent cleaners and mechanical decontamination. Machine polishing skills, and the health and safety requirements for their usage. Interior odour removal and deep cleaning techniques. Stone chip and small area scratch removal and refinement. Please note: Stage 1 must be completed before Stage 2, though they can be booked on consecutive days. With the combined Stage 1 and 2 certification, attendees will be able to address various valeting requirements and can complete quite complex jobs efficiently, and satisfactorily in-house. This will reduce the need to call in specialists, and enhance vehicle turnaround times through greater workflow and competence. Claim back your costs! Students will hold a UKDA accredited certificate in Stage 2 Valeting for Business, and as we are a Government Registered Learning Provider, you can be assured of the highest quality of training. As, in most cases, HMRC considers vocational training to be for the benefit of the business and a legitimate business expense, course costs can usually be recouped against company taxes, and a full VAT invoice is provided for reclamation.   Course Length 1 Day (0930-1600) Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Completion of Level 1 Certification UKDA Certified

This course involves hands-on use of the actual locators to detect and trace the route of buried...

QNUK Level 1 Award in Health and Safety in a Construction Environment (RQF)

This course is a beginners programmers course, to intermediate level, starting from basics through to creating methods, classes and objects. At the end of this course, one would be conversant with all the necessary basics of Java. This is a one day course in classroom, in Manchester.

This accredited qualification has been designed for delivery to all learners working or preparing to work in a customer service role or where using the telephone is a part of their role. This qualification covers the principles of customer service, including how to meet customer expectations, the importance of appropriate behaviour and communication techniques, as well as ways to deal with problem customers. How long will it take me to achieve this qualification? This qualification is classroom-based and usually achieved by taking a one-day course. However, it can also be achieved through a variety of other methods including blended and distance learning, as long as the recommended learning hours are completed. How is the qualification assessed? Through a 1-hour 30-question multiple-choice examination. Learners must achieve a score of at least 20 out of 30 in order to pass.