40 Airport courses

International Summer School for 13-18 year olds from all over the world at St Andrews, Cambridge and Yale Universities.

Private Pilot’s Licence (PPL (H)) Imagine walking into an airport, hiring a helicopter and flying yourself and your friends to an hotel. You land in their grounds and walk into the restaurant. After a lovely meal you take off and fly home. You can turn this fantasy into reality with a Private Pilot's licence (PPL (H)). Getting a PPL for helicopter flying is a tremendous experience from your first flying lesson to getting your license at the end. The course is a combination of flying in the helicopter and learning about the theory of why helicopters fly and how to fly safely. There are nine practical subjects you need to study, each with a multiple choice exam that you have to pass to qualify. These subjects are Air law, Operational procedures, Meteorology, Human performance and limitations, Communications, Aircraft (general) and principles of flight, Navigation, Flight performance and planning. In addition you will need to pass a practical test on the correct phraseology to use when talking to Air Traffic Control (ATC) as you fly across the country. This is known as 'radiotelephony' and we have our own in-house instructor and examiner. Overall, the course is challenging and stimulating. You can study at home and make use of Heliflight’s ground school where we will teach you all you need to know and help you if you have any difficulties with particular aspects. To take your exams you will first need to set up a CAA customer portal. You will also need this for your medical,  The flying part of the course is exhilarating. Divided into 30 different exercises you will spend at least 45 hours in the air to gain your license. These excercises provide you with the skills you need to fly safely, anywhere in the world (subject to meeting any local licencing requirements). You’ll get a feel for how the helicopter handles when flying straight and level, turning, climbing and descending. And, as your training progresses, you’ll learn how to hover. It takes time. Co-ordinating all the controls to fly above the ground in one position is tricky to begin with, but, when you mastered it, you’ll just want to do it again and again. Once you are proficient in the hover you’ll also be taught to land and take off. Pretty soon you’ll be ready for a solo flight. This is one of those great experiences in life and every pilot remembers theirs. The day you pilot a helicopter with no-one else in the cockpit, perhaps flying a circuit around the airfield, be prepared to feel fantastic for a very long time: it’s that tremendous. You’ll spend at least ten hours of your course flying solo, often away from the airfield and eventually landing at others as you practice navigation. Towards the end of the course there is also a practical test on navigating cross-country. Finally you take a flight test, a day where you demonstrate all you’ve learnt to a friendly flight examiner. Heliflight has its own resident examiners. On successful completion of your flight test you apply for your licence and soon you’ll be a bone fide Helicopter pilot. You need to be 16 years old to fly solo and have to be 17 to apply for a license. You must also be reasonably healthy as you will need to pass a medical examination with a doctor recognised by the Civil Aviation Authority. There is a specialist Aviation Medical Centre at the airfield. If you would like further information about the PPL (H) course and the other training available from Heliflight We’ll be happy to help. Alternatively please call us.

SEP (Safety Equipment & Procedures) with one of our partners British Airways, Virgin Atlantic or TUI. Airline Cabin Crew need to be able to act quickly and confidently in all safety and emergency situations. SEP (Safety Equipment & Procedures) with one of our partners British Airways, Virgin Atlantic or TUI  Airline Cabin Crew also known as: Air Hostess, Flight Attendant and Stewardess need to be able to act quickly and confidently in all safety and emergency situations. SEP (Safety Equipment & Procedures) training will ensure all participants have in-depth knowledge of safety and emergency procedures. It will also fully prepare candidates to handle any unforeseen circumstances or emergencies. The professional training of aircrew is a priority for aviation safety. This course is also ideal for those who would like more indepth specific training. If you completed your Cabin Crew studies elsewhere and would like to progress, to refresh your knowledge or get more confidence, you can join our one day certified SEP (Safety Equipment & Procedures) training. Aircraft Doors Aircraft doors operations in both Armed and Disarmed modes in both theory and practical sessions. Evacuation Planned Emergency Passenger Evacuations on the aircraft from a crew seat including door operations and passenger evacuation commands. Fire & Smoke • Theory of Fire • Firefighting equipment with practical handling • Firefighting drills and implementing them • Practical exercises in smoke chambers • Practical exercise with a naked flame Slide Descents/ Slideraft • Instruction and practice of descending A320 & B747 slides • Practical exercises on B747 dry slideraft Survival • Principles of survival • Survival equipment • Option of training survival of dry B747 slideraft Date – 30 April 2024 Time – 10am to 4pm Fees – £150 including certificate Dress Code – would be the best for all female candidates to wear trousers, comfortable shoes so that they can all practice. Confirmation of the course– once registration completed, we will email you joining instructions for the day Location – Bournemouth airport training centre Certificates – provided within 5 working days Please contact info@waterlooacademy.co.uk if you have further enquiries VISIT OUR YOUTUBE CHANNEL HERE

Learners will develop knowledge from the FD&FA foundation courses (C01 modules 1 and 2) and/or industry experience with specific regard to more complex system design considerations.

The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&FA systems.

We are partnering with Youthscape to host a workshop to present their latest research on young people, Translating God. Translating God is a new major project from The Youthscape Centre for Research exploring how young people understand and respond to the Christian story. Published in three parts, it represents more than two years of work with input from a diverse group of more than a thousand young people Everyone interested in how the church engages with young people – church leaders, youth workers, parents and perhaps young people themselves – will want to see what this ground-breaking research means for you, your ministry and the wider church. More information on the research can be found here. https://www.youthscape.co.uk/research/translating-god/home Date: 10th October 2024 Time: 10 am – 13:00 pm (Lunch 12:30pm) Doors open: 9:30 am (Coffee) Venue: Youthscape 74 Bute ST, LU1 2EY Location and Parking Town Center location. 50 meters from the main train station & coach stations and airport drop off—one mile from junction 10, M1. Parking can be located on Power Court, just a short walk from the main entrance. Useful Info -Maximum stay is 5 hours -From £0.90 for one hour to £3.80 for five hour -Sat Nav postcode is LU1 3JG – By by app, phone, cash or card – Pay by phone Location 802298

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.

Learners will develop knowledge from the FD&FA foundation module and/or industry experience and apply this to the maintenance of FD&FA systems.

Qualatex Fundamentals Course hosted by Balloon Market. About this event Qualatex Fundamentals Course hosted by Balloon Market Fundamentals – this balloon course for beginners will address all aspects of working with balloons, from basic skills to creative designs, as well as the business essentials necessary to starting a professional balloon business. The class will consist of a combination of demonstrations, presentations and hands-on work. The instructor will demonstrate different balloon types and correct use of equipment and inflation, as well as how to create profitable classic and on-trend designs. This also covers pricing and marketing your work. These are the topics covered during the class: The Qualatex Latex range, equipment overview, air-filled design ideas, pricing your work, Qualatex Microfoil & Bubble balloons, Organic Designs and Helium Inflation With members of the Qualatex team on hand to assist, there will be lots of opportunity to ask questions and network with experienced professionals and other delegates. The day schedule is as follows: • 9:30 – arrive, register & welcome tea/coffee •10:00 – Part 1 of the class •11:30 – Comfort break & Networking •11:45 – Part 2 of the class •13:00 – Lunch & Networking •13:30 – Part 3 of the class •15:00 – Comfort Break & Networking •15:15 – Part 4 of the class •16:30 – Conclusion, Questions, Feedback, Certificates and Group Photo •17:00 - Finish Includes: A comprehensive, full-colour manual that will function as a valuable reference guide, which includes information on float times, basic design principles, pricing, and more. Participants will receive a certificate upon successful completion of the course. By the end of the course you will: Have the knowledge and confidence to create basic balloon creations including bouquets and garlands Understand Health and Safety in the Balloon Business Know how to use different balloons in different situations Have the knowledge to confidently inflate different types of balloons Understand pricing and how to make money from balloons Feel confident in selling your creations with a profitable price tag Have had the opportunity to interact and connect with others in the industry, just like you! Have numerous photo opportunities to use for social media Have the opportunity to appear in a future BMTV episode (should you wish to) Benefits of this course: Comprehensive, full-colour manual which acts as a valuable reference guide for future jobs with float times, design principles and pricing Exclusive discount to use at Balloon Market on the day (Place your order before 1pm on the day and you can have your order delivered to you to take away with you before you leave) Free ‘All Day’ refreshments including light lunch Ample free parking at the venue Easy access (only a few minutes from the motorway (J.2, M27) and 15 minutes from the train station / Southampton Airport and Ferry Terminal!) COVID-19 Safety As this class is being taught in person, class numbers and layout have been adjusted to make allowances for social distancing. We will ask each delegate to comply with any reasonable health and safety guidelines that may be applicable at the time of the course, which may include taking a lateral flow test or having your temperature taken before being allowed admittance to the course. As government guidelines are subject to change, full details of Health and Safety measures in place will be supplied to delegates closer to each event delivery date. If you have any queries about booking, please message the Qualatex team directly on pelmarketing@qualatex.com or Balloon Market on info@balloonmarket.co.uk. Cancellation Policy: In the event the class needs to be cancelled, or you are unable to attend, due to Covid-19 infection or requirement to self-isolate, you will be able to transfer your booking to another date for the same course, or a different Qualatex course. In the event there is no suitable course availability, you will be offered a refund. Instructor : Julie Dunham CBA Want to find out what others think about their investment in training? Click the link below.

This is an intensive installation, commissioning, and maintenance course for emergency lighting systems. It is a follow on from our Foundation course on emergency lighting where the requirements of installation, commissioning, and maintenance are considered.