• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

43657 Courses

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 10
Delivered in Clay Cross + 1 more or Online + more
£500

PLC 5 Day

4.7(1243)

By Technique Learning Solutions

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3 & 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 5 Day
Delivered in Clay Cross + 1 more or Online + more
£500

C01M03 - FD&FA Installation principles - BS 5839-1 (classroom)

5.0(2)

By Ember Compliance

Learners will develop knowledge from the FD&FA foundation BS 5839-1 module and/or industry experience and apply this to the installation of FD&FA systems.

C01M03 - FD&FA Installation principles - BS 5839-1 (classroom)
Delivered In-Person in Broxburn + more
£230

Master Business Networking in Just 1 Day - Join our Workshop in Buxton

By Mangates

Business Networking 1 Day Training in Buxton

Master Business Networking in Just 1 Day - Join our Workshop in Buxton
Delivered In-Person + more
£595 to £795

ISO 30401 Knowledge Management Lead Auditor Course

5.0(1)

By Cognicert Limited

ISO 30401 sets requirements and provides guidelines for establishing, implementing, maintaining, reviewing and improving an effective management system for knowledge management in organizations. All the requirements of this standard are applicable to any organization, regardless of its type or size, or the products and services it provides. Knowledge management is the intentional process of defining, structuring, retaining, and sharing an organization’s employees’ knowledge and experience.

ISO 30401 Knowledge Management Lead Auditor Course
Delivered Online & In-Person in London
£1,200

Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

4.6(39)

By Geopace Training

Learn how to take blood ... train as a Phlebotomist Nationally Recognised Qualification No previous experience or qualifications needed OCN Accredited - Level 3 (advanced) CPD Accredited (The CPD Certification Service) Covers all steps up to live blood draw Practise on artificial arm and fake blood! Basic understanding of English language required OPEN TO ALL APPLICANTS

Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom
Delivered Online + more
£285

Level 3 Award in First Aid at Work

By Medical Education Group LTD

Our first aid at work training courses are in accordance with guidance provided by the Health & Safety executive (HSE) and are both fun and informative. This qualification should enable Learners to attain the knowledge and practical competencies needed to deal with a range of first aid situations. Learners should be able to demonstrate the practical administration of safe, prompt, effective first aid in emergency situations with an understanding of the role of first aider and include dynamic and realistic casualty simulation which puts the candidates through their paces. We hold the First Aid at Work course at our Education Centre in Ellesmere Port. We are also able to teach this course 'in-house' at our clients preferred site. Learners must be at least 14 years old on the first day of training and be able to perform tasks at floor level. There are no other formal entry requirements but we strongly recommend that Learners have a minimum of Level 1 in literacy and numeracy or equivalent.

Level 3 Award in First Aid at Work
Delivered In-Person in Ellesmere Port + more
£250

Food Safety Course: Understanding and Preventing Foodborne Viruses

5.0(43)

By ASK SONIA LTD

This course provides a comprehensive introduction to foodborne viruses, focusing on their properties, transmission, and impact on food safety. Designed for professionals at all levels, it covers detection methods, contamination risks, and prevention strategies to help businesses mitigate viral threats in food supply chains. Delivered by an industry expert, the course includes an interactive Q&A session for deeper insights. No prior knowledge is required.

Food Safety Course: Understanding and Preventing Foodborne Viruses
Delivered Online + more
£300

C01M04 - FD&FA Commissioning principles - BS 5839-1 (classroom)

5.0(1)

By Ember Compliance

Learners will develop knowledge from the FD&FA foundation module and/or industry experience and apply this to the commissioning, handover, and acceptance of FD&FA systems.

C01M04 - FD&FA Commissioning principles - BS 5839-1 (classroom)
Delivered In-Person in Broxburn + more
£230

Boost Customer Satisfaction: Join us 1 Day Training in Bromley

By Mangates

Customer Service Essentials 1 Day Training in Bromley

Boost Customer Satisfaction: Join us 1 Day Training in Bromley
Delivered In-Person + more
£595 to £795