593 Courses

Duration 1 Day Working in partnership with The ATACC Group, we are now authorised trainers for Penthrox® the newly introduced to the UK pain relieving option from GALEN which is alternative to Entonox in Adult Trauma patients. Penthrox® is also often referred to as “The Green Whistle”. Penthrox® is ideal for medics in UK Fire Brigades, Police Forces, Coastguard, Mountain Rescue, High Risk Industries, RNLI and the Event Medical industry. Penthrox® is cost effective, small and lightweight when compared with Entonox and can be included as part of a range of pain relieving options. Penthrox® is a Prescription Only Medication (POM) which is to be used in accordance with company/organisational policy and/or Emergency Directives or Patient Group Directives. Course Information Venue: All our 'Open' courses are delivered from our dedicated training venue: Pulse South Coast Ltd, Bentley Wildfowl, Harveys Lane, Ringmer, BN8 5AF On occasion we may use a separate venue, this will be advised on the course booking. Facilities: On your course you will be provided with tea & coffee making facilities and biscuits. We are in a rural location so we recommend brining lunch with you on the day. There is a microwave & fridge on site for your use. There is a garage that is approximately a 10 minute drive from our venue. Parking: We have a dedicated car park that is approximately a 300m walk to the training venue. There is no additional cost to use this parking. We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times. What is required from you: All courses are delivered in English, you must have a basic understanding of the English language to attend. There is a requirement for you to show that you are capable of performing the skills you are taught on the course, due to this you will need to be physically able to demonstrate all practical elements of the course. Dress: As a company we pride ourselves on running immersive & practical training courses. You will often be expected to kneel & work outdoors, please dress appropriately. Identification: As we deliver Ofqual accredited courses, there is a requirement for you to show a form of ID on the first day of the course. This could be; a driving license, passport or something that clearly shows who you are. Timings: All of our courses have a minimum training time of six hours a day, we will often advertise a course as seven hours to include break times. On occasion it is required to go over the scheduled times, however this will always be discussed with the group on the day. Trainer: During your course you will have a designated trainer for the duration. They are there not only to assess for the qualification, but to offer you guidance and support throughout. Security: We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times.

Get your Scottish Certificate for Personal Licence Holders qualification here with us at Knight Training! The Scottish Certificate for Personal Licence Holders (SCPLH) is the prerequisite for you to get your Personal Licence, aimed at anyone who wishes to sell or authorise the sale of alcohol. The course is a legal requirement, and it basically runs through the responsibilities that one must know in order to sell alcohol in a designated premises. Here at Knight Training we welcome our customers with open arms and provide the best service possible. Why waste more time? Call us now on 01524 388279 to get your SCPLH today!

Duration 2 Days Validity 3 years Course Overview The Level 3 Award in Paediatric First Aid is a nationally recognized qualification designed for individuals responsible for the care of infants and children, such as teachers, childcare providers, and nursery staff. This course equips learners with the knowledge and practical skills necessary to respond to a wide range of emergencies that may arise when caring for young children. In line with the Early Years Foundation Stage (EYFS) and Ofsted requirements, this qualification ensures that participants can handle both minor and life-threatening situations involving infants and children. Upon successful completion, learners will have the confidence to act quickly and effectively in paediatric first aid emergencies. What’s Covered Roles and responsibilities of a Paediatric First Aider Assessing an emergency situation Infant and child CPR & AED usage Managing unconscious casualties (infants and children) Providing first aid for choking (infants and children) Treating wounds, bleeding, and shock Recognizing and responding to fractures, dislocations, and head injuries Addressing common childhood illnesses such as asthma and allergic reactions Administering first aid for burns, scalds, and poisoning Handling anaphylaxis and severe allergic reactions Recognizing and managing seizures Managing external and internal bleeding Understanding incident reporting and documentation requirements Entry Requirements Participants must be at least 16 years old on the first day of training. There are no formal entry requirements; however, learners should have a good understanding of basic literacy and numeracy to complete written assessments and effectively participate in the practical aspects of the course. Course Information Venue: All our 'Open' courses are delivered from our dedicated training venue: Pulse South Coast Ltd, Bentley Wildfowl, Harveys Lane, Ringmer, BN8 5AF On occasion we may use a separate venue, this will be advised on the course booking. Facilities: On your course you will be provided with tea & coffee making facilities and biscuits. We are in a rural location so we recommend brining lunch with you on the day. There is a microwave & fridge on site for your use. There is a garage that is approximately a 10 minute drive from our venue. Parking: We have a dedicated car park that is approximately a 300m walk to the training venue. There is no additional cost to use this parking. We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times. What is required from you: All courses are delivered in English, you must have a basic understanding of the English language to attend. There is a requirement for you to show that you are capable of performing the skills you are taught on the course, due to this you will need to be physically able to demonstrate all practical elements of the course. Dress: As a company we pride ourselves on running immersive & practical training courses. You will often be expected to kneel & work outdoors, please dress appropriately. Identification: As we deliver Ofqual accredited courses, there is a requirement for you to show a form of ID on the first day of the course. This could be; a driving license, passport or something that clearly shows who you are. Timings: All of our courses have a minimum training time of six hours a day, we will often advertise a course as seven hours to include break times. On occasion it is required to go over the scheduled times, however this will always be discussed with the group on the day. Trainer: During your course you will have a designated trainer for the duration. They are there not only to assess for the qualification, but to offer you guidance and support throughout. Security: We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times.

Why Choose Vectorworks Night Training Courses? Flexibility: Learn around your work schedule. Personalized Attention: Small classes for focused guidance. Practical Learning: Hands-on training for immediate application. Convenience: Balance work and learning seamlessly. Check our Website Training Duration: 10 hours. Approach: Personalized 1-on-1 Training and customized training. Timings: Schedule a convenient hour, Mon to Sat, between 9 am and 7 pm. Course Outline: Mastering Vectorworks Basics I. Introduction to CAD and Vectorworks Software Understanding the role of Computer-Aided Design (CAD) in modern workflows. Comprehensive introduction to Vectorworks software. II. Workspace Setup and Fundamental Options Configuring the workspace for efficient navigation and operation. Exploring basic options to enhance user experience. III. Basic Skills in Drawing and Object Selection Mastering fundamental drawing techniques. Expertise in selecting and manipulating objects. IV. Advanced Editing Techniques Combining shapes, mirroring, rotating, and grouping objects effectively. Working with precise scaling, preferences, and templates. V. Detailed Object Manipulation and Attributes Drawing and moving objects accurately within the design space. Utilizing advanced editing tools like fillet and offset. Introduction to basic attributes and group editing. VI. Advanced Drawing Techniques and Graphics Creating room plans with walls, windows, and doors. Implementing graphic elements such as hatching, gradients, and image fills. Drawing elevations using various methods and techniques. VII. Resource Management and Design Layers Importing images for graphic illustration. Creating symbols and navigating the Resource Browser. Organizing the drawing effectively using design layers. VIII. Labels, Annotations, and User Interface Mastery Labeling drawings and incorporating simple title block text. Navigating the user interface, understanding key terminologies. Plotting, printing, creating sheets (A1, A2, A3), and working with viewports. IX. Advanced Object Manipulation and Customization Converting drawings into PDF files. Efficiently working with files, objects, and data. Utilizing object snaps, quick selection, division, and measurement. X. Dimensioning, Text, and Tool Palettes Implementing dimensioning and annotations effectively. Working with text, custom tool palettes, and organizing these palettes. Creating standard views and additional drawing objects (Arc, Donut, Ellipse). XI. 3D Modeling Introduction and Real-World Units Introduction to 3D modeling, focusing on creating extrudes. Working with real-world units for accurate representation. XII. Advanced Object Manipulation and Exporting Manipulating objects, changing object angles, creating mirror images. Dealing with architectural elements like walls, doors, windows, and floors. By the end of the Vectorworks Evening Training Course, participants will: Demonstrate proficiency in using the Vectorworks interface, tools, and navigation. Create and edit 2D drawings, including walls, doors, windows, floors, ceilings, stairs, and railings. Effectively manage layers, classes, and views for organized and controlled object placement. Create and edit dimensions and annotations for accurate measurements and documentation. Develop skills in creating, modifying, and utilizing symbols for increased efficiency. Generate and edit 3D geometry, apply textures, and create sections and elevations from 3D models. Create polished presentation drawings using viewports, annotations, and text for clarity. Summarize course content and confidently apply learned skills in Vectorworks projects. Utilize available resources for further learning and professional development. Who Should Attend? Perfect for those aiming to master Advanced 2D Plans, Sections, Elevations and Construction detailing, lighting, and rendering in Vectorworks. Schedule Flexibility: Book personalized 1-on-1 sessions, Monday to Saturday, 9 a.m. to 7 p.m. Split 10 hours to fit your schedule. Method: Choose in-person or Live Online 1-on-1 sessions with tailored content and individual support, including Zoom options. Why Vectorworks? A pioneering CAD software, Vectorworks seamlessly integrates 2D and 3D capabilities, making it ideal for architects and designers. Free Educational Access: Students and professors can access a complimentary Vectorworks Designer license via the Academic Portal. Explore Vectorworks: Transform your designs with Vectorworks, the leading 2D, 3D, CAD, BIM software. Download or try now: https://www.vectorworks.net Tailored Training Solutions: We offer customized and project-focused training programs, designed to meet your specific needs and goals. Individualized Coaching: Receive personalized one-on-one guidance tailored exclusively for you. Adaptable Timings: Choose training slots that align with your schedule, ensuring flexibility in your learning journey. Ongoing Assistance: Access continuous post-course support to enhance your understanding and resolve queries. Comprehensive Learning Resources: Receive detailed materials providing in-depth insights for effective learning and reference. Recognition of Participation: Earn a Certificate of Attendance upon completion of your personalized training. Affordable Learning: Benefit from cost-effective rates, making quality education accessible to all. Software Setup Guidance: Get expert assistance in setting up your software on your devices for seamless learning experiences. Rewards for Referrals: Recommend our courses to others and enjoy special rewards for each successful referral. Group Learning Benefits: Enjoy exclusive discounts when you opt for group training, making it an ideal choice for teams. Convenient Hours of Operation: Access our training services at your convenience, with operating hours extending to accommodate your busy schedule. Tailored Learning Paths: Experience courses curated specifically for your needs, ensuring targeted and effective learning outcomes.

Our online InDesign for Beginners Course is ideal for anyone looking to work with software quickly. Learn what makes good design, how to apply branding consistently and create documents for both print and digital output.

Duration 1 Day Validity 3 years Course Overview The Qualsafe Level 3 Award in Administration of Emergency Medical Gases is a nationally recognized qualification designed for individuals who may be required to administer medical gases, such as oxygen, in emergency situations. This course is ideal for healthcare professionals, first aiders, and emergency responders working in sectors where medical gases are used to preserve life and manage critical conditions. Learners will gain the essential knowledge and skills to safely administer emergency oxygen and Entonox® (a gas mixture of nitrous oxide and oxygen), ensuring the well-being of patients in a variety of emergency scenarios. Upon completion, participants will be confident in their ability to apply this crucial intervention when necessary. What’s Covered Roles and responsibilities in administering emergency medical gases Safe handling and storage of medical gas cylinders Understanding the physiology of respiration and how medical gases work Indications for the use of oxygen and Entonox® Equipment setup and safety checks Correct administration techniques for oxygen and Entonox® Identifying and managing risks and contraindications Monitoring patients during and after administration Legal considerations and accurate incident reporting Entry Requirements Participants must be at least 18 years old on the first day of training. No formal qualifications are required, but learners are advised to have a basic understanding of first aid and emergency care to benefit fully from the course. Course Information Venue: All our 'Open' courses are delivered from our dedicated training venue: Pulse South Coast Ltd, Bentley Wildfowl, Harveys Lane, Ringmer, BN8 5AF On occasion we may use a separate venue, this will be advised on the course booking. Facilities: On your course you will be provided with tea & coffee making facilities and biscuits. We are in a rural location so we recommend brining lunch with you on the day. There is a microwave & fridge on site for your use. There is a garage that is approximately a 10 minute drive from our venue. Parking: We have a dedicated car park that is approximately a 300m walk to the training venue. There is no additional cost to use this parking. We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times. What is required from you: All courses are delivered in English, you must have a basic understanding of the English language to attend. There is a requirement for you to show that you are capable of performing the skills you are taught on the course, due to this you will need to be physically able to demonstrate all practical elements of the course. Dress: As a company we pride ourselves on running immersive & practical training courses. You will often be expected to kneel & work outdoors, please dress appropriately. Identification: As we deliver Ofqual accredited courses, there is a requirement for you to show a form of ID on the first day of the course. This could be; a driving license, passport or something that clearly shows who you are. Timings: All of our courses have a minimum training time of six hours a day, we will often advertise a course as seven hours to include break times. On occasion it is required to go over the scheduled times, however this will always be discussed with the group on the day. Trainer: During your course you will have a designated trainer for the duration. They are there not only to assess for the qualification, but to offer you guidance and support throughout. Security: We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times.

An online or onsite Camtasia course covering the major aspects of the software.

Outspoken Cycles Park Tool School courses are aimed at home mechanics who wish to have an in-depth knowledge of their bikes as well as those individuals required to maintain bikes for friends, schools, clubs, businesses and other organisations. The 2 Day Intermediate course teaches you mechanical skills following the Park Tool Big Blue Book of Bicycle Repair syllabus to familiarise you with many bicycle systems and workshop practices. Completion of assessment leads to the award of a certificate. You are encouraged to work on your own bike. Please be aware for some elements of the course certain bikes may not be suitable, however, there are also a number of classroom bikes to work on where necessary. We can provide a classroom bike if you’re unable to bring your own.  Course Detail Over two days you will cover: Chains (Assessing wear, chain care regimes, removal, sizing and installation) Pedals, Cranks and Drivetrain (Assessing wear, removal and installation of all components) Cassettes and Freewheels (Removal and installation, assessing wear) Gear Setup (Cabling and setup) Rim & Mechanical Disc Brakes (Assessing wear, strip down and re-installation) Bicycle Setup (Choosing the right bike, saddle height) Frame Assessment (new and damage frame assessment, tools used for frame prep) Price The course costs £275 inc VAT. This includes Park Tool Big Blue Book of Bicycle Repair and the use of all tools and equipment while on course.  If you’re a Cambridge Cycling Campaign member, we offer a 15% discount to support the good work that they do. Please email us for access to your coupon code. Refunds for courses are only given under exceptional circumstances and never within 7 days of the advertised course. In the unlikely event we have to make the difficult decision to cancel a course, participants will be offered a refund or the option to reschedule. Please read our terms & conditions for full details. Pre-requisites Course participants must be 18 years old or above. We may be able to accommodate younger participants 16+, we accept these on a case by case basis based on prior experience. Please contact us to discuss. Participants should have a good knowledge of the key content outlined in the Basic: Ride With Confidence course before booking the Intermediate as this level of knowledge is assumed by the instructor on the day. There will be a brief refresher, but if you are unsure do get in touch to discuss. Course Timings, Assessment, Location & Travel Courses run 9am-4pm over two days, or 9:30am – 4:30pm for weekend courses. Courses take place in our dedicated training workshop at our offices in Cambridge. We have an abundance of bike racks, and we are close to Cambridge North Station. There is limited parking on site on a first-come-first-served basis and we are close to parking at Cambridge North Station. There is some limited on-road parking (at owners risk). You may also park for free at the Milton Park & Ride, which is only a short 15 minute cycle to our workshop.  Further details If you have any further questions, please do please get in touch to discuss.

Why AutoCAD Night Training Course? This Autodesk AutoCAD 2D Evening Course, 10 hours, is perfect for beginners aiming to create 2D plans, elevations, sections. It covers all tools in AutoCAD 2D, making it valuable for both newcomers and those aspiring to enhance their skills. Click here for more info: Website When: Personalized 1-on-1 sessions. Available from Mon to Sat 9 am to 7 pm. Book over the phone, call 02077202581 Duration: 10 hours (Split 10 hrs over as many as days you want) Method: In-person or live online training Course Content: Foundational Shape Construction Manipulating Lines, Arcs, and Polylines Optimizing Object Alignment with Grip Tools Data Management and Backup Protocols File Format Exploration and Understanding Disaster Recovery Strategies Advanced Object Creation Techniques Precision Measurement Unit Handling Dynamic Input Methods Utilizing Inquiry Commands and Measurement Tools Effective Object Visualization and Navigation Zoom, Pan, and Object Manipulation Swift Object Management Strategies Object Transformation and Alteration Techniques Functions for Trimming, Extending, and Offsetting Objects Creating Various Geometric Shapes Object Editing, Joining, and Filleting Stretching and Organizing Objects Layer Management and Customization Configuring Object Properties and Linetypes Designing Layouts and Efficient Page Configurations Scaling Drawing Views and Adding Annotations Text Creation, Styling, and Editing Dimensioning Principles and Customization Implementing Multileaders for Annotations Object Hatching and Editing Techniques Managing Reusable Content: Blocks and Symbols Utilizing Tool Palettes and Working with Groups Understanding Model Space and Paper Space Creating Layouts and Viewports Scaling Viewports and Plotting/PDF Output Managing Multiple Sheet Drawings Optimizing Plotstyles for Printing Creating Custom Drawing Templates To download AutoCAD, visit Autodesk's official website. Advantages: AutoCAD stands as the industry-leading computer-aided design (CAD) software, widely adopted for creating architectural, engineering, and construction drawings. Acquire essential skills applicable across a diverse spectrum of industries. Assessment: Evaluation will occur informally during classes, which comprehensively cover specific topics, complemented by practical drawing exercises to reinforce skills and knowledge. Additionally, we offer longer, independent drawing tasks that encompass multiple acquired skills, evaluated against professional benchmarks. Requirements: Prospective participants should possess basic computer literacy and engagement in professions where CAD is utilized. English Proficiency: Applicants are expected to demonstrate proficiency in both written and spoken English. Why Opt for This Course? Our AutoCAD course is your gateway to mastering the essential skills for creating top-notch technical drawings. Designed with beginners in mind, this course is perfect for individuals who have little to no prior experience with AutoCAD. If your work or studies involve CAD drawings, gaining a solid grasp of the program is crucial for confidence and proficiency. Upon enrollment, students gain access to a free 30 days trial. While classes are conducted using AutoCAD on PC, it's worth noting that the course is compatible with AutoCAD on Mac, albeit with slight interface variations. Who Should Attend? This course caters to those eager to acquire the skills necessary for creating and interpreting drawings produced in AutoCAD. Our diverse system hails from various industries, including engineering, architecture, landscape architecture, construction, electronics, and product design. Why Opt for CAD Training? Practical Learning Experience: Immerse yourself in hands-on training. Personalized One-to-One AutoCAD Classes: Benefit from individualized attention. Expert and Knowledgeable Instructors: Learn from skilled and experienced teachers. Online Training Recordings: Access recorded AutoCAD training sessions online. Best Price Guarantee: Enjoy competitive pricing with a satisfaction guarantee. Pre and Post-Training Support: Receive lifetime free support before and after completing your training. Flexible Schedule: Choose your class timings and dates-weekdays, weekends, or evenings. Tailored Course Content: Customize the AutoCAD course to align with your specific needs. Access Anywhere: Access AutoCAD training and support from any location.

Duration 1 Day Validity 3 years Course Overview The Level 3 Award in Emergency Paediatric First Aid is a nationally recognized qualification aimed at individuals who need to provide immediate first aid for infants and children in emergency situations. This course is ideal for those working in childcare settings or with parental responsibilities who require a basic understanding of how to respond to common paediatric emergencies. Aligned with Early Years Foundation Stage (EYFS) and Ofsted requirements, this qualification enables learners to act swiftly and confidently in emergency situations. Upon completion, participants will be able to provide essential first aid care to infants and children until professional medical help arrives. What’s Covered Roles and responsibilities of an Emergency Paediatric First Aider Conducting a primary survey of an emergency situation Infant and child CPR & AED usage Managing unconscious infants and children First aid for choking in infants and children Treatment of wounds and bleeding Handling shock effectively Addressing minor injuries such as cuts, grazes, and bruises Understanding incident reporting and recording Entry Requirements Participants must be at least 16 years old on the first day of training. There are no formal entry requirements, though learners are encouraged to have a basic level of literacy and numeracy to complete the assessments and actively engage in the practical exercises. Course Information Venue: All our 'Open' courses are delivered from our dedicated training venue: Pulse South Coast Ltd, Bentley Wildfowl, Harveys Lane, Ringmer, BN8 5AF On occasion we may use a separate venue, this will be advised on the course booking. Facilities: On your course you will be provided with tea & coffee making facilities and biscuits. We are in a rural location so we recommend brining lunch with you on the day. There is a microwave & fridge on site for your use. There is a garage that is approximately a 10 minute drive from our venue. Parking: We have a dedicated car park that is approximately a 300m walk to the training venue. There is no additional cost to use this parking. We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times. What is required from you: All courses are delivered in English, you must have a basic understanding of the English language to attend. There is a requirement for you to show that you are capable of performing the skills you are taught on the course, due to this you will need to be physically able to demonstrate all practical elements of the course. Dress: As a company we pride ourselves on running immersive & practical training courses. You will often be expected to kneel & work outdoors, please dress appropriately. Identification: As we deliver Ofqual accredited courses, there is a requirement for you to show a form of ID on the first day of the course. This could be; a driving license, passport or something that clearly shows who you are. Timings: All of our courses have a minimum training time of six hours a day, we will often advertise a course as seven hours to include break times. On occasion it is required to go over the scheduled times, however this will always be discussed with the group on the day. Trainer: During your course you will have a designated trainer for the duration. They are there not only to assess for the qualification, but to offer you guidance and support throughout. Security: We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times.