Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry.Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits.High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator.The course gives emphasis, throughout, to: – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’. – Risk management: safety and also business relatedAllowing the Temporary Works Co-ordinator (TWC) to: – Understand the need for and duties of a TWC – Understand the role of others – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course.Course Attendance:Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made.Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself.Although the following is not mandatory, delegates may find the following useful– BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design– BS EN12812:2008. Falsework ‐ performance requirements and general design– BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design– NASC TG20/13 plus supplement 1– NASC TG9:12
This course is aimed at people who are entering or are already working in the construction and civil engineering industry.
The “ISO 17025:2018 Lead Assessor” course provides comprehensive training in Learn how to audit each and every ISO 17025: 2018 and ISO 17011 requirements Learn basic auditing skills; Implement methods to comply with the ISO 17025:2018 requirements. Auditing process and techniques
This one day masterclass is designed to provide a practical application of the content that is covered within The DEI Playbook and is aimed at anyone tasked with launching and implementing diversity and inclusion within their organisation.
Duration 3 Days 18 CPD hours This course is intended for The audience for this course are data professionals and business intelligence professionals who want to learn how to accurately perform data analysis using Power BI. This course is also targeted toward those individuals who develop reports that visualize data from the data platform technologies that exist on both in the cloud and on-premises. This course covers the various methods and best practices that are in line with business and technical requirements for modeling, visualizing, and analyzing data with Power BI. The course will show how to access and process data from a range of data sources including both relational and non-relational sources. Finally, this course will also discuss how to manage and deploy reports and dashboards for sharing and content distribution. Prerequisites Understanding core data concepts. Knowledge of working with relational data in the cloud. Knowledge of working with non-relational data in the cloud. Knowledge of data analysis and visualization concepts. DP-900T00 Microsoft Azure Data Fundamentals is recommended 1 - Discover data analysis Overview of data analysis Roles in data Tasks of a data analyst 2 - Get started building with Power BI Use Power BI Building blocks of Power BI Tour and use the Power BI service 3 - Get data in Power BI Get data from files Get data from relational data sources Create dynamic reports with parameters Get data from a NoSQL database Get data from online services Select a storage mode Get data from Azure Analysis Services Fix performance issues Resolve data import errors 4 - Clean, transform, and load data in Power BI Shape the initial data Simplify the data structure Evaluate and change column data types Combine multiple tables into a single table Profile data in Power BI Use Advanced Editor to modify M code 5 - Design a semantic model in Power BI Work with tables Create a date table Work with dimensions Define data granularity Work with relationships and cardinality Resolve modeling challenges 6 - Add measures to Power BI Desktop models Create simple measures Create compound measures Create quick measures Compare calculated columns with measures 7 - Add calculated tables and columns to Power BI Desktop models Create calculated columns Learn about row context Choose a technique to add a column 8 - Use DAX time intelligence functions in Power BI Desktop models Use DAX time intelligence functions Additional time intelligence calculations 9 - Optimize a model for performance in Power BI Review performance of measures, relationships, and visuals Use variables to improve performance and troubleshooting Reduce cardinality Optimize DirectQuery models with table level storage Create and manage aggregations 10 - Design Power BI reports Design the analytical report layout Design visually appealing reports Report objects Select report visuals Select report visuals to suit the report layout Format and configure visualizations Work with key performance indicators 11 - Configure Power BI report filters Apply filters to the report structure Apply filters with slicers Design reports with advanced filtering techniques Consumption-time filtering Select report filter techniques Case study - Configure report filters based on feedback 12 - Enhance Power BI report designs for the user experience Design reports to show details Design reports to highlight values Design reports that behave like apps Work with bookmarks Design reports for navigation Work with visual headers Design reports with built-in assistance Tune report performance Optimize reports for mobile use 13 - Perform analytics in Power BI Explore statistical summary Identify outliers with Power BI visuals Group and bin data for analysis Apply clustering techniques Conduct time series analysis Use the Analyze feature Create what-if parameters Use specialized visuals 14 - Create and manage workspaces in Power BI Distribute a report or dashboard Monitor usage and performance Recommend a development life cycle strategy Troubleshoot data by viewing its lineage Configure data protection 15 - Manage semantic models in Power BI Use a Power BI gateway to connect to on-premises data sources Configure a semantic model scheduled refresh Configure incremental refresh settings Manage and promote semantic models Troubleshoot service connectivity Boost performance with query caching (Premium) 16 - Create dashboards in Power BI Configure data alerts Explore data by asking questions Review Quick insights Add a dashboard theme Pin a live report page to a dashboard Configure a real-time dashboard Set mobile view 17 - Implement row-level security Configure row-level security with the static method Configure row-level security with the dynamic method Additional course details: Nexus Humans PL-300T00: Microsoft Power BI Data Analyst training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the PL-300T00: Microsoft Power BI Data Analyst course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.
Advanced level Reflexology course in Methley, Leeds
Duration 3 Days 18 CPD hours This course is intended for This course is designed for anyone who needs an understanding of IT Service Management to help deliver better value to customers. It is appropriate for all IT staff and management, as well as customers who work closely with IT to support business requirements. This course is also designed for students who are seeking the ITIL© 4 Foundation certification and who want to prepare for ITIL© 4 Foundation exam. Overview By the completion of this course, you will have a deep understanding of the 7 Guiding Principles, 4 Dimensions of Service Management, 34 ITIL© Practices, and the new Service Value Chain that incorporate the core of ITIL© version 4. ITIL© is the world?s leading best practice framework for implementing IT Service Management. ITIL version 4 introduces IT Service Management through the lens of a Service Value System (SVS), which provides a holistic end-to-end view of how to successfully contribute to business value, and also how to leverage concepts from models such as Lean IT, Agile, DevOps and Organizational Change Management. This foundational course immerses you in the guiding principles, dimensions, and practices of ITIL© 4. This course will earn you 21 PDUs. This class includes an exam voucher. 1 - ITIL 4 OVERVIEW Introduction to ITIL Key Concepts of ITIL 2 - The ITIL Framework The Four Dimensions of Service Management The ITIL Service Value System 3 - The ITIL Guiding Principles Focus on Value Start Where You Are Progress Iteratively with Feedback Collaborate and Promote Visibility Think and Work Holistically Keep It Simple and Practical Optimize and Automate 4 - THE ITIL SERVICE VALUE SYSTEM (SVS) Governance The Service Value Chain Continual Improvement 5 - Key ITIL Practices Continual Improvement Service Level Management Change Control Incident Management Service Request Management Service Desk Problem Management 6 - Other ITIL Practices General Management Practices Service Management Practices Technical Management Practices
Duration 5 Days Certificate Validity 3 years Course Overview Embark on the journey towards the QA Level 3 Certificate in First Response Emergency Care (RQF), a nationally recognised qualification meticulously crafted for individuals carving a path in emergency services, ambulance operations, event and security medical sectors, or high-risk workplaces. Endorsed by The Faculty of Pre-Hospital Care – The Royal College of Surgeons of Edinburgh and meticulously aligned with the PHEM skills framework at descriptor level D, this qualification serves as a cornerstone for diverse roles in emergency care. Whether you aspire to be an Event Medical Responder, Emergency Care Support Worker, or beyond, this qualification opens doors to a realm of possibilities. Furthermore, the QA Level 3 Certificate in First Response Emergency Care (RQF) seamlessly integrates into a progressive suite of prehospital care qualifications, paving the way towards the esteemed QA Level 6 Diploma in Paramedic Practice (RQF). What’s Covered Delve into the roles and responsibilities of a first responder Navigate through diverse medical emergencies Master the art of patient assessment Acquire proficiency in airway management Learn adult, child, and infant CPR & AED usage Understand Return of Spontaneous Circulation (ROSC) procedures Gain insights into emergency oxygen administration Handle traumatic injuries with confidence Manage catastrophic bleeding scenarios Address cases of shock effectively Navigate through incidents involving poisoning and intoxicating substances Tackle both external and internal bleeding situations Learn techniques for helmet removal Master neck, spine, and pelvic immobilisation procedures Understand and manage environmental exposure cases Address burns and scalds efficiently Learn to handle minor injuries Grasp the essentials of incident reporting Entry Requirements Participants must be at least 17 years old on the first day of training. No additional formal entry requirements exist; however, learners are advised to possess a minimum Level 2 proficiency in literacy and numeracy or equivalent, along with a basic understanding of first aid concepts Course Information Venue: All our 'Open' courses are delivered from our dedicated training venue: Pulse South Coast Ltd, Bentley Wildfowl, Harveys Lane, Ringmer, BN8 5AF On occasion we may use a separate venue, this will be advised on the course booking. Facilities: On your course you will be provided with tea & coffee making facilities and biscuits. We are in a rural location so we recommend brining lunch with you on the day. There is a microwave & fridge on site for your use. There is a garage that is approximately a 10 minute drive from our venue. Parking: We have a dedicated car park that is approximately a 300m walk to the training venue. There is no additional cost to use this parking. We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times. What is required from you: All courses are delivered in English, you must have a basic understanding of the English language to attend. There is a requirement for you to show that you are capable of performing the skills you are taught on the course, due to this you will need to be physically able to demonstrate all practical elements of the course. Dress: As a company we pride ourselves on running immersive & practical training courses. You will often be expected to kneel & work outdoors, please dress appropriately. Identification: As we deliver Ofqual accredited courses, there is a requirement for you to show a form of ID on the first day of the course. This could be; a driving license, passport or something that clearly shows who you are. Timings: All of our courses have a minimum training time of six hours a day, we will often advertise a course as seven hours to include break times. On occasion it is required to go over the scheduled times, however this will always be discussed with the group on the day. Trainer: During your course you will have a designated trainer for the duration. They are there not only to assess for the qualification, but to offer you guidance and support throughout. Security: We accept no responsibility for any personal loss or theft while you are on our training courses or premises. Please ensure to keep your personal belongings safe at all times.
ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card.